fenrir/docu/fenrir.1

.\"t
.\" Automatically generated by Pandoc 1.19.2.1
.\"
.TH "" "" "" "" ""
.hy
.SH Fenrir User Manual
.PP
Fenrir is a modern command line screen reader written in Python3.
.PP
It has a modular structure, a flexible based driver model, is highly
configurable and easy to customize and extend (see Developer
Manual (fenrir_development_manual)).
.PP
Please see the following pages for the current (fenrir_current_version)
and Git (fenrir_git_version) version of Fenrir.
.SH Support and Requirements
.PP
Fenrir requires several drivers to interact with the operating system.
.SS Speech Drivers
.PP
A speech driver is for communication with the text to speech system like
Speech\-Dispatcher (#SpeechDispatcher) or
Espeak (http://espeak.sourceforge.net).
\\ See section Speech (#Speech) in \[aq]\[aq]settings.conf\[aq]\[aq] for
more information.
.SS SpeechDispatcher
.PP
This driver is used by default.
It uses Speech\-dispatcher as its backend.
.PP
Dependencies:
.IP \[bu] 2
Speech\-dispatcher (installed and configured,
Documentation (https///devel.freebsoft.org/speechd#sec2))
.IP \[bu] 2
Python\-speechd
.SS Espeak
.PP
Uses Espeak via Python bindings.
.PP
Dependencies:
.IP \[bu] 2
Espeak or Espeak\-ng
.IP \[bu] 2
python\-espeak (https///launchpad.net/python-espeak)
.SS Generic
.PP
This invokes speech via a sub\-process.
This is almost the same as using the commandline.
The performance depends on the overhead of the speech synthesis
application but it is really flexible.
.PP
Dependencies:
.IP \[bu] 2
Espeak or Espeak\-ng
.PP
The Requirements are flexible, they depend on the configuration in
settings.conf.
.SS Dummy
.PP
this is just for debugging, logs are output to the screen and logged as
well.
.SS Sound Drivers
.PP
To play sound icons and similar.\\ See section Sound (#Sound) in
\[aq]\[aq]settings.conf\[aq]\[aq] for more information.
.SS Generic
.PP
This driver is used by default.
.PP
Dependencies:
.IP \[bu] 2
Sox (http://sox.sourceforge.net/) with opus support The Requirements are
flexible, they depend on the configuration in settings.conf.
.SS Gstreamer
.PP
if you prefer to use Gstreamer for sound output.
.PP
Dependencies:
.IP \[bu] 2
Gstreamer >= 1.x
.IP \[bu] 2
Glibc
.SS Dummy
.PP
this is just for debugging, logs are output to the screen and logged as
well.
.SS Input Drivers
.PP
Input drivers are to capture keyboard shortcuts issued to the screen
reader
.PD 0
.P
.PD
See section Keyboard (#Keyboard) in \[aq]\[aq]settings.conf\[aq]\[aq]
for more information.
.SS Evdev
.PP
This driver is used by default.
.PP
Evdev is the low level input device framework for Linux.
.PP
Dependencies:
.IP \[bu] 2
python\-evdev >=0.6.3
.IP \[bu] 2
pyudev
.IP \[bu] 2
loaded uinput kernel module
.IP \[bu] 2
exclusive access to the input devices Read permission to the following
files and services:
.IP \[bu] 2
/dev/input
.IP \[bu] 2
/dev/uinput
.SS Screen Drivers
.PP
The job of a screen driver is to get the information of current screen
content.\\ See section Screen (#Screen) in
\[aq]\[aq]settings.conf\[aq]\[aq] for more information.
.SS VCSA
.PP
This driver is used by default.
For Linux VCSA devices.
These exist on any current standard installation of Linux.
.PP
Dependencie s:
.IP \[bu] 2
python\-dbus Read permission to the following files and services (or run
as root):
.IP \[bu] 2
/sys/devices/virtual/tty/tty0/active
.IP \[bu] 2
/dev/tty[1 \- 64]
.IP \[bu] 2
/dev/vcsa[1 \- 64] (VCSA manpage (https///linux.die.net/man/4/vcsa))
.IP \[bu] 2
read Logind DBUS
.SS Braille Drivers
.PP
This is for Braille support.
Braille is currently a work in progress and is planned for the Fenrir
2.0 release.\\ See section Braille (#Braille) in
\[aq]\[aq]settings.conf\[aq]\[aq] for more information.
.SS BRLTTY
.PP
This driver is used by default.
It uses BrlTTY (brltty) to communicate with with a Braille device.
.PP
Dependencies:
.IP \[bu] 2
BrlTTY (configured and running,
Documentation (http://mielke.cc/brltty/doc/Manual-BRLTTY/English/BRLTTY.html))
.IP \[bu] 2
python\-brlapi (configured,
Documentation (http://mielke.cc/brltty/doc/Manual-BrlAPI/English/BrlAPI.html))
## Currently supported platforms
.PP
Currently Fenrir completely supports the following Platforms:
.IP \[bu] 2
Linux TTY Support for further Systems are planned.
.SH Installation
.PP
Fenrir can run without installation.
It just requires the dependencies are installed first.
.PP
We recommend to try it out before installation to be sure everything
works and prevent yourself from experiencing a non\-talking environment.
.SS Try Out
.PP
Fenrir does not require installation.
You can try it and make sure everything works before you decide to
install.
In this way you can be sure that your system doesnt break or stop
talking.
for that you can just grab the code and run as root
\[aq]\[aq]src/fenrir/fenrir\[aq]\[aq] (in foreground) or
\[aq]\[aq]src/fenrir/fenrir\-daemon\[aq]\[aq] (in background, used by
systemd for autostart)
.SS Install it
.SS Documented operating systems
.SS Arch Linux
.PP
For Arch there are PKGBUILDs in the AUR:
.IP \[bu] 2
fenrir (https///aur.archlinux.org/packages/fenrir/)
.IP \[bu] 2
fenrir\-git (https///aur.archlinux.org/packages/fenrir-git/)
.SS Manual
.IP "1." 3
Download the latest stable version from the
Fenrir\-Project (https///linux-a11y.org/index.php?page=fenrir-screenreader)
site.
.IP "2." 3
Unpack the archive
.IP "3." 3
Check the needed Dependencys by running
check\-dependencys.py (https///github.com/chrys87/fenrir/blob/master/check-dependencies.py)
script
.IP "4." 3
install the missing dependencies an standard installation requires the
following:
.RS 4
.IP \[bu] 2
python3 >= 3.3 (and all the following is needed for python3 )
.IP \[bu] 2
python3\-speechd (screen)
.IP \[bu] 2
python3\-dbus (screen)
.IP \[bu] 2
python3\-evdev >= 0.6.4(input)
.IP \[bu] 2
python3\-daemonize (background service)
.IP \[bu] 2
python3\-brlapi (braille)
.IP \[bu] 2
python3\-pyenchant (spellchecker)
.IP \[bu] 2
your language for aspell (aspell\-\f[C]<lang>\f[]) (spellchecker)
.IP \[bu] 2
sox (sound)
.IP \[bu] 2
For an individual installation see Support and
Requirements (#Support%20and%20Requirements) or consult the
Readme (https///github.com/chrys87/fenrir/blob/master/README.md))
.RE
.IP "5." 3
run "install.sh" as root
.PP
this installs Fenrir as the following
.IP
.nf
\f[C]
*\ Application:\[aq]\[aq]/opt/fenrir\[aq]\[aq]
*\ Settings:\[aq]\[aq]/etc/fenrir\[aq]\[aq]
*\ Sound\ Icons:\[aq]\[aq]/usr/share/fenrir/\[aq]\[aq]
\f[]
.fi
.PP
to remove Fenrir just run uninstall.sh as root
.SS Git
.PP
if you want to get the latest code you can use git to get a development
snapshot:
.IP
.nf
\f[C]
git\ clone\ https://github.com/chrys87/fenrir.git
\f[]
.fi
.SS Auto Start
.PP
To start Fenrir once: systemctl start fenrir
.PP
To enable auto start on system boot: systemctl enable fenrir
.SH First Steps
.PP
If you are using Fenrir for the first time you may want to take a look
at these resources:
.IP \[bu] 2
Keybindings (#Keybindings)
.IP \[bu] 2
Tutorial Mode (#Tutorial%20Mode)
.SH Features
.SS Commands
.SS Keybindings
.PP
Normal commands can be invoked in two ways: 1.
Using a Metakey (FenrirKey (#Fenrir%20Key)) 2.
Shortcuts with a single key
.PP
See section Keyboard (#Keyboard) in \[aq]\[aq]settings.conf\[aq]\[aq]
for more information.
#### Fenrir Key
.PP
The Fenrir Key is for invoking screen reader commands.
Fenrir can utilize more than one FenrirKey at the same time.
By default the following keys are used: 1.
Insert 2.
KeyPad Insert 3.
Meta (Super, Windows)
.SS Script Key
.PP
To invoke "Scripts" the Script Key is mandatory.
The shortcut is encoded in the filename of the script.
See Scripting (#Scripting) #### Desktop Layout
.PP
.TS
tab(@);
l l.
T{
Shortcut
T}@T{
Command
T}
_
T{
FenrirKey + H
T}@T{
toggle tutorial mode (#Tutorial%20Mode)
T}
T{
CTRL
T}@T{
shut up (interrupts speech) (#shut%20up)
T}
T{
FenrirKey + KeyPad 9
T}@T{
reviews bottom (#review%20bottom)
T}
T{
FenrirKey + KeyPad 7
T}@T{
reviews top (#review%20top)
T}
T{
KeyPad 8
T}@T{
reviews current line (#review%20current%20line)
T}
T{
KeyPad 7
T}@T{
reviews previous line (#review%20previous%20line)
T}
T{
KeyPad 9
T}@T{
reviews next line (#review%20next%20line)
T}
T{
FenrirKey + KeyPad 4
T}@T{
reviews line beginning (#review%20line%20beginning)
T}
T{
FenrirKey + KeyPad 6
T}@T{
reviews line ending (#review%20line%20ending)
T}
T{
FenrirKey + KeyPad 1
T}@T{
reviews line first character (#review%20line%20first%20character)
T}
T{
FenrirKey + KeyPad 3
T}@T{
reviews line last character (#review%20line%20last%20character)
T}
T{
FenrirKey + Alt + 1
T}@T{
presents first line (#present%20first%20line)
T}
T{
FenrirKey + Alt + 2
T}@T{
presents last line (#present%20last%20line)
T}
T{
KeyPad 5
T}@T{
reviews current word (#review%20current%20word)
T}
T{
KeyPad 4
T}@T{
reviews previous word (#review%20previous%20word)
T}
T{
KeyPad 6
T}@T{
reviews next word (#review%20next%20word)
T}
T{
FenrirKey + Shift + KeyPad 5
T}@T{
reviews current word phonetic (#review%20current%20word%20phonetic)
T}
T{
FenrirKey + Shift + KeyPad 4
T}@T{
reviews previous word phonetic (#review%20previous%20word%20phonetic)
T}
T{
FenrirKey + Shift + KeyPad 6
T}@T{
reviews next word phonetic (#review%20next%20word%20phonetic)
T}
T{
KeyPad 2
T}@T{
reviews current char (#review%20current%20character)
T}
T{
KeyPad 1
T}@T{
reviews previous char (#review%20previous%20character)
T}
T{
KeyPad 3
T}@T{
reviews next char (#review%20next%20character)
T}
T{
FenrirKey + Shift + KeyPad 2
T}@T{
reviews current character
phonetic (#review%20current%20character%20phonetic)
T}
T{
FenrirKey + Shift + KeyPad 1
T}@T{
reviews previous character
phonetic (#review%20previous%20character%20phonetic)
T}
T{
FenrirKey + Shift + KeyPad 3
T}@T{
reviews next character phonetic (#review%20next%20character%20phonetic)
T}
T{
FenrirKey + CTRL + KeyPad 8
T}@T{
reviews up (#review%20up)
T}
T{
FenrirKey + CTRL + KeyPad 2
T}@T{
reviews down (#review%20down)
T}
T{
FenrirKey + KeyPad dot
T}@T{
exit review (#exit%20review)
T}
T{
KeyPad dot
T}@T{
cursor position (#cursor%20position)
T}
T{
FenrirKey + I
T}@T{
indent curr line (#indent%20current%20line)
T}
T{
FenrirKey + KeyPad 5
T}@T{
current screen (#current%20screen)
T}
T{
FenrirKey + KeyPad 8
T}@T{
current screen before cursor (#current%20screen%20before%20cursor)
T}
T{
FenrirKey + KeyPad 2
T}@T{
current screen after cursor (#current%20screen%20after%20cursor)
T}
T{
\f[C]<Unbound>\f[]
T}@T{
cursor read to end of line (#cursor%20read%20to%20end%20of%20line)
T}
T{
\f[C]<Unbound>\f[]
T}@T{
cursor column (#cursor%20column)
T}
T{
\f[C]<Unbound>\f[]
T}@T{
cursor line number (#cursor%20line%20number)
T}
T{
\f[C]<Unbound>\f[]
T}@T{
Braille flush (#braille%20flush)
T}
T{
\f[C]<Unbound>\f[]
T}@T{
Braille pan left (#braille%20pan%20left)
T}
T{
\f[C]<Unbound>\f[]
T}@T{
Braille pan right (#braille%20pan%20right)
T}
T{
\f[C]<Unbound>\f[]
T}@T{
Braille return to cursor (#braille%20return%20to%20cursor)
T}
T{
FenrirKey + CTRL + 1
T}@T{
clear bookmark 1 (#clear%20Bookmark%20X)
T}
T{
FenrirKey + Shift + 1
T}@T{
set bookmark 1 (#set%20Bookmark%20X)
T}
T{
FenrirKey + 1
T}@T{
bookmark 1 (#read%20Bookmark%20X)
T}
T{
FenrirKey + CTRL + 2
T}@T{
clear bookmark 2 (#clear%20Bookmark%20X)
T}
T{
FenrirKey + Shift + 2
T}@T{
set bookmark 2 (#set%20Bookmark%20X)
T}
T{
FenrirKey + 2
T}@T{
bookmark 2 (#read%20Bookmark%20X)
T}
T{
FenrirKey + CTRL + 3
T}@T{
clear bookmark 3 (#clear%20Bookmark%20X)
T}
T{
FenrirKey + Shift + 3
T}@T{
set bookmark 3 (#set%20Bookmark%20X)
T}
T{
FenrirKey + 3
T}@T{
bookmark 3 (#read%20Bookmark%20X)
T}
T{
FenrirKey + CTRL + 4
T}@T{
clear bookmark 4 (#clear%20Bookmark%20X)
T}
T{
FenrirKey + Shift + 4
T}@T{
set bookmark 4 (#set%20Bookmark%20X)
T}
T{
FenrirKey + 4
T}@T{
bookmark 4 (#read%20Bookmark%20X)
T}
T{
FenrirKey + CTRL + 5
T}@T{
clear bookmark 5 (#clear%20Bookmark%20X)
T}
T{
FenrirKey + Shift + 5
T}@T{
set bookmark 5 (#set%20Bookmark%20X)
T}
T{
FenrirKey + 5
T}@T{
bookmark 5 (#read%20Bookmark%20X)
T}
T{
FenrirKey + CTRL + 6
T}@T{
clear bookmark 6 (#clear%20Bookmark%20X)
T}
T{
FenrirKey + Shift + 6
T}@T{
set bookmark 6 (#set%20Bookmark%20X)
T}
T{
FenrirKey + 6
T}@T{
bookmark 6 (#read%20Bookmark%20X)
T}
T{
FenrirKey + CTRL + 7
T}@T{
clear bookmark 7 (#clear%20Bookmark%20X)
T}
T{
FenrirKey + Shift + 7
T}@T{
set bookmark 7 (#set%20Bookmark%20X)
T}
T{
FenrirKey + 7
T}@T{
bookmark 7 (#read%20Bookmark%20X)
T}
T{
FenrirKey + CTRL + 8
T}@T{
clear bookmark 8 (#clear%20Bookmark%20X)
T}
T{
FenrirKey + Shift + 8
T}@T{
set bookmark 8 (#set%20Bookmark%20X)
T}
T{
FenrirKey + 8
T}@T{
bookmark 8 (#read%20Bookmark%20X)
T}
T{
FenrirKey + CTRL + 9
T}@T{
clear bookmark 9 (#clear%20Bookmark%20X)
T}
T{
FenrirKey + Shift + 9
T}@T{
set bookmark 9 (#set%20Bookmark%20X)
T}
T{
FenrirKey + 9
T}@T{
bookmark 9 (#read%20Bookmark%20X)
T}
T{
FenrirKey + CTRL + 0
T}@T{
clear bookmark 10 (#clear%20Bookmark%20X)
T}
T{
FenrirKey + Shift + 0
T}@T{
set bookmark 10 (#set%20Bookmark%20X)
T}
T{
FenrirKey + 0
T}@T{
bookmark 10 (#read%20Bookmark%20X)
T}
T{
FenrirKey + KeyPad Slash
T}@T{
set window application (#Create%20Window)
T}
T{
2 * FenrirKey + KeyPad Slash
T}@T{
clear window application (#Remove%20Window)
T}
T{
KeyPad Plus
T}@T{
read last incoming (#last%20incoming)
T}
T{
FenrirKey + F2
T}@T{
toggles braille (#toggle%20braille)
T}
T{
FenrirKey + F3
T}@T{
toggles sound (#toggle%20sound)
T}
T{
FenrirKey + F4
T}@T{
toggles speech (#toggle%20speech)
T}
T{
KeyPad Enter
T}@T{
temporarily disables speech (#disable%20speech%20temporarily)
T}
T{
FenrirKey + CTRL + P
T}@T{
toggles punctuation level (#toggle%20punctuation%20level)
T}
T{
FenrirKey + RightBrace
T}@T{
toggle auto spell check (#toggle%20auto%20spell%20check)
T}
T{
FenrirKey + Backslash
T}@T{
toggles output (#toggle%20output)
T}
T{
FenrirKey + CTRL + E
T}@T{
toggles emoticons (#toggle%20emoticons)
T}
T{
FenrirKey + KeyPad Enter
T}@T{
toggles auto read (#toggle%20auto%20read)
T}
T{
FenrirKey + CTRL + T
T}@T{
toggles auto time (#toggle%20auto%20time)
T}
T{
FenrirKey + KeyPad ASTERISK
T}@T{
toggles highlight tracking (#toggle%20highlight%20tracking)
T}
T{
FenrirKey + Q
T}@T{
quits fenrir (#quit%20Fenrir)
T}
T{
FenrirKey + T
T}@T{
Announce time (#Time)
T}
T{
2 * FenrirKey + T
T}@T{
Announce date (#Date)
T}
T{
FenrirKey + S
T}@T{
spell check (#spell%20check)
T}
T{
2 * FenrirKey + S
T}@T{
add word to spell check (#add%20word%20to%20spell%20check)
T}
T{
FenrirKey + Shift + S
T}@T{
removes word from spell check (#removes%20word%20from%20spell%20check)
T}
T{
FenrirKey + Backspace
T}@T{
forward keypress (#forward%20keypress)
T}
T{
FenrirKey + Up
T}@T{
increase speech volume (#increase%20speech%20volume)
T}
T{
FenrirKey + Down
T}@T{
decrease speech volume (#decrease%20speech%20volume)
T}
T{
FenrirKey + Right
T}@T{
increase speech rate (#increase%20speech%20rate)
T}
T{
FenrirKey + Left
T}@T{
decrease speech rate (#decrease%20speech%20rate)
T}
T{
FenrirKey + Alt + Right
T}@T{
increase speech pitch (#increase%20speech%20pitch)
T}
T{
FenrirKey + Alt + Left
T}@T{
decrease speech pitch (#decrease%20speech%20pitch)
T}
T{
FenrirKey + Alt + Up
T}@T{
increase sound volume (#increase%20sound%20volume)
T}
T{
FenrirKey + Alt + Down
T}@T{
decrease sound volume (#decrease%20sound%20volume)
T}
T{
FenrirKey + CTRL + Shift + C
T}@T{
clears clipboard (#clear%20clipboard)
T}
T{
FenrirKey + Home
T}@T{
first clipboard (#first%20clipboard)
T}
T{
FenrirKey + End
T}@T{
last clipboard (#last%20clipboard)
T}
T{
FenrirKey + PageUp
T}@T{
previous clipboard (#previous%20clipboard)
T}
T{
FenrirKey + PageDown
T}@T{
next clipboard (#next%20clipboard)
T}
T{
FenrirKey + Shift + C
T}@T{
current clipboard (#read%20current%20clipboard)
T}
T{
FenrirKey + C
T}@T{
copy marked text to clipboard (#copy%20marked%20to%20clipboard)
T}
T{
FenrirKey + V
T}@T{
paste clipboard contents (#paste%20clipboard)
T}
T{
FenrirKey + P
T}@T{
import clipboard from file (#import%20clipboard%20from%20file)
T}
T{
FenrirKey + Alt + Shift +C
T}@T{
export clipboard to file (#export%20clipboard%20to%20file)
T}
T{
FenrirKey + CTRL + Shift + X
T}@T{
remove marks (#Remove%20Marks)
T}
T{
FenrirKey + X
T}@T{
set mark (#Set%20mark)
T}
T{
FenrirKey + Shift + X
T}@T{
announce marked text (#Get%20text%20between%20marks)
T}
T{
Linux specific
T}@T{
T}
T{
\f[C]<Unbound>\f[]
T}@T{
export clipboard to X
T}
T{
FenrirKey + CTRL + Up
T}@T{
include Alsa volume
T}
T{
FenrirKey + CTRL + Down
T}@T{
decrease Alsa volume
T}
.TE
.SS Laptop Layout
.PP
.TS
tab(@);
l l.
T{
Shortcut
T}@T{
Command
T}
_
T{
FenrirKey + H
T}@T{
toggle tutorial mode (#Tutorial%20Mode)
T}
T{
CTRL
T}@T{
shut up (interrupts speech) (#shut%20up)
T}
T{
FenrirKey + Shift + O
T}@T{
reviews bottom (#review%20bottom)
T}
T{
FenrirKey + Shift + U
T}@T{
reviews top (#review%20top)
T}
T{
FenrirKey + I
T}@T{
reviews current line (#review%20current%20line)
T}
T{
FenrirKey + U
T}@T{
reviews previous line (#review%20previous%20line)
T}
T{
FenrirKey + O
T}@T{
reviews next line (#review%20next%20line)
T}
T{
FenrirKey + Shift + J
T}@T{
reviews line beginning (#review%20line%20beginning)
T}
T{
FenrirKey + Shift + L
T}@T{
reviews line ending (#review%20line%20ending)
T}
T{
FenrirKey + CTRL + J
T}@T{
reviews line first character (#review%20line%20first%20character)
T}
T{
FenrirKey + CTRL + L
T}@T{
reviews line last character (#review%20line%20last%20character)
T}
T{
FenrirKey + Alt + 1
T}@T{
presents first line (#present%20first%20line)
T}
T{
FenrirKey + Alt + 2
T}@T{
presents last line (#present%20last%20line)
T}
T{
FenrirKey + K
T}@T{
reviews current word (#review%20current%20word)
T}
T{
FenrirKey + J
T}@T{
reviews previous word (#review%20previous%20word)
T}
T{
FenrirKey + L
T}@T{
reviews next word (#review%20next%20word)
T}
T{
FenrirKey + CTRL + ALT + K
T}@T{
reviews current word phonetic (#review%20current%20word%20phonetic)
T}
T{
FenrirKey + CTRL + ALT + J
T}@T{
reviews previous word phonetic (#review%20previous%20word%20phonetic)
T}
T{
FenrirKey + CTRL + ALT + L
T}@T{
reviews next word phonetic (#review%20next%20word%20phonetic)
T}
T{
FenrirKey + comma
T}@T{
reviews current character (#review%20current%20character)
T}
T{
FenrirKey + M
T}@T{
reviews previous character (#review%20previous%20character)
T}
T{
FenrirKey + dot
T}@T{
reviews next character (#review%20next%20character)
T}
T{
FenrirKey + CTRL + ALT + comma
T}@T{
reviews current character
phonetic (#review%20current%20character%20phonetic)
T}
T{
FenrirKey + CTRL + ALT + M
T}@T{
reviews previous character
phonetic (#review%20previous%20character%20phonetic)
T}
T{
FenrirKey + CTRL + ALT + dot
T}@T{
reviews next character phonetic (#review%20next%20character%20phonetic)
T}
T{
FenrirKey + CTRL + I
T}@T{
reviews up (#review%20up)
T}
T{
FenrirKey + CTRL + comma
T}@T{
reviews down (#review%20down)
T}
T{
FenrirKey + Slash
T}@T{
exit review (#exit%20review)
T}
T{
FenrirKey + Shift + dot
T}@T{
cursor position (#cursor%20position)
T}
T{
2 * FenrirKey + I
T}@T{
indent curr line (#indent%20current%20line)
T}
T{
FenrirKey + Shift + K
T}@T{
current screen (#current%20screen)
T}
T{
FenrirKey + Shift + I
T}@T{
current screen before cursor (#current%20screen%20before%20cursor)
T}
T{
FenrirKey + Shift + comma
T}@T{
current screen after cursor (#current%20screen%20after%20cursor)
T}
T{
\f[C]<Unbound>\f[]
T}@T{
cursor read to end of line (#cursor%20read%20to%20end%20of%20line)
T}
T{
\f[C]<Unbound>\f[]
T}@T{
cursor column (#cursor%20column)
T}
T{
\f[C]<Unbound>\f[]
T}@T{
cursor line number (#cursor%20line%20number)
T}
T{
\f[C]<Unbound>\f[]
T}@T{
Braille flush (#braille%20flush)
T}
T{
\f[C]<Unbound>\f[]
T}@T{
Braille pan left (#braille%20pan%20left)
T}
T{
\f[C]<Unbound>\f[]
T}@T{
Braille pan right (#braille%20pan%20right)
T}
T{
\f[C]<Unbound>\f[]
T}@T{
Braille return to cursor (#braille%20return%20to%20cursor)
T}
T{
FenrirKey + CTRL + 1
T}@T{
clear bookmark 1 (#clear%20Bookmark%20X)
T}
T{
FenrirKey + Shift + 1
T}@T{
set bookmark 1 (#set%20Bookmark%20X)
T}
T{
FenrirKey + 1
T}@T{
bookmark 1 (#read%20Bookmark%20X)
T}
T{
FenrirKey + CTRL + 2
T}@T{
clear bookmark 2 (#clear%20Bookmark%20X)
T}
T{
FenrirKey + Shift + 2
T}@T{
set bookmark 2 (#set%20Bookmark%20X)
T}
T{
FenrirKey + 2
T}@T{
bookmark 2 (#read%20Bookmark%20X)
T}
T{
FenrirKey + CTRL + 3
T}@T{
clear bookmark 3 (#clear%20Bookmark%20X)
T}
T{
FenrirKey + Shift + 3
T}@T{
set bookmark 3 (#set%20Bookmark%20X)
T}
T{
FenrirKey + 3
T}@T{
bookmark 3 (#read%20Bookmark%20X)
T}
T{
FenrirKey + CTRL + 4
T}@T{
clear bookmark 4 (#clear%20Bookmark%20X)
T}
T{
FenrirKey + Shift + 4
T}@T{
set bookmark 4 (#set%20Bookmark%20X)
T}
T{
FenrirKey + 4
T}@T{
bookmark 4 (#read%20Bookmark%20X)
T}
T{
FenrirKey + CTRL + 5
T}@T{
clear bookmark 5 (#clear%20Bookmark%20X)
T}
T{
FenrirKey + Shift + 5
T}@T{
set bookmark 5 (#set%20Bookmark%20X)
T}
T{
FenrirKey + 5
T}@T{
bookmark 5 (#read%20Bookmark%20X)
T}
T{
FenrirKey + CTRL + 6
T}@T{
clear bookmark 6 (#clear%20Bookmark%20X)
T}
T{
FenrirKey + Shift + 6
T}@T{
set bookmark 6 (#set%20Bookmark%20X)
T}
T{
FenrirKey + 6
T}@T{
bookmark 6 (#read%20Bookmark%20X)
T}
T{
FenrirKey + CTRL + 7
T}@T{
clear bookmark 7 (#clear%20Bookmark%20X)
T}
T{
FenrirKey + Shift + 7
T}@T{
set bookmark 7 (#set%20Bookmark%20X)
T}
T{
FenrirKey + 7
T}@T{
bookmark 7 (#read%20Bookmark%20X)
T}
T{
FenrirKey + CTRL + 8
T}@T{
clear bookmark 8 (#clear%20Bookmark%20X)
T}
T{
FenrirKey + Shift + 8
T}@T{
set bookmark 8 (#set%20Bookmark%20X)
T}
T{
FenrirKey + 8
T}@T{
bookmark 8 (#read%20Bookmark%20X)
T}
T{
FenrirKey + CTRL + 9
T}@T{
clear bookmark 9 (#clear%20Bookmark%20X)
T}
T{
FenrirKey + Shift + 9
T}@T{
set bookmark 9 (#set%20Bookmark%20X)
T}
T{
FenrirKey + 9
T}@T{
bookmark 9 (#read%20Bookmark%20X)
T}
T{
FenrirKey + CTRL + 0
T}@T{
clear bookmark 10 (#clear%20Bookmark%20X)
T}
T{
FenrirKey + Shift + 0
T}@T{
set bookmark 10 (#set%20Bookmark%20X)
T}
T{
FenrirKey + 0
T}@T{
bookmark 10 (#read%20Bookmark%20X)
T}
T{
FenrirKey + CTRL + 8
T}@T{
set window application (#Create%20Window)
T}
T{
2 * FenrirKey + CTRL + 8
T}@T{
clear window application (#Remove%20Window)
T}
T{
FenrirKey + Semicolon
T}@T{
read last incoming (#last%20incoming)
T}
T{
FenrirKey + F2
T}@T{
toggles braille (#toggle%20braille)
T}
T{
FenrirKey + F3
T}@T{
toggles sound (#toggle%20sound)
T}
T{
FenrirKey + F4
T}@T{
toggles speech (#toggle%20speech)
T}
T{
FenrirKey + Enter
T}@T{
temporarily disables speech (#disable%20speech%20temporarily)
T}
T{
FenrirKey + Shift + CTRL + P
T}@T{
toggles punctuation level (#toggle%20punctuation%20level)
T}
T{
FenrirKey + RightBrace
T}@T{
toggle auto spell check (#toggle%20auto%20spell%20check)
T}
T{
FenrirKey + Shift + Enter
T}@T{
toggles output (#toggle%20output)
T}
T{
FenrirKey + Shift + E
T}@T{
toggles emoticons (#toggle%20emoticons)
T}
T{
FenrirKey + Enter
T}@T{
toggles auto read (#toggle%20auto%20read)
T}
T{
FenrirKey + CTRL + T
T}@T{
toggles auto time (#toggle%20auto%20time)
T}
T{
FenrirKey + Y
T}@T{
toggles highlight tracking (#toggle%20highlight%20tracking)
T}
T{
FenrirKey + Q
T}@T{
quits fenrir (#quit%20Fenrir)
T}
T{
FenrirKey + T
T}@T{
Announce time (#Time)
T}
T{
2 * FenrirKey + T
T}@T{
Announce date (#Date)
T}
T{
FenrirKey + S
T}@T{
spell check (#spell%20check)
T}
T{
2 * FenrirKey + S
T}@T{
add word to spell check (#add%20word%20to%20spell%20check)
T}
T{
FenrirKey + Shift + S
T}@T{
removes word from spell check (#removes%20word%20from%20spell%20check)
T}
T{
FenrirKey + Backspace
T}@T{
forward keypress (#forward%20keypress)
T}
T{
FenrirKey + Up
T}@T{
increase speech volume (#increase%20speech%20volume)
T}
T{
FenrirKey + Down
T}@T{
decrease speech volume (#decrease%20speech%20volume)
T}
T{
FenrirKey + Right
T}@T{
increase speech rate (#increase%20speech%20rate)
T}
T{
FenrirKey + Left
T}@T{
decrease speech rate (#decrease%20speech%20rate)
T}
T{
FenrirKey + Alt + Right
T}@T{
increase speech pitch (#increase%20speech%20pitch)
T}
T{
FenrirKey + Alt + Left
T}@T{
decrease speech pitch (#decrease%20speech%20pitch)
T}
T{
FenrirKey + Alt + Up
T}@T{
increase sound volume (#increase%20sound%20volume)
T}
T{
FenrirKey + Alt + Down
T}@T{
decrease sound volume (#decrease%20sound%20volume)
T}
T{
FenrirKey + CTRL + Shift + C
T}@T{
clears clipboard (#clear%20clipboard)
T}
T{
FenrirKey + Home
T}@T{
first clipboard (#first%20clipboard)
T}
T{
FenrirKey + End
T}@T{
last clipboard (#last%20clipboard)
T}
T{
FenrirKey + PageUp
T}@T{
previous clipboard (#previous%20clipboard)
T}
T{
FenrirKey + PageDown
T}@T{
next clipboard (#next%20clipboard)
T}
T{
FenrirKey + Shift + C
T}@T{
current clipboard (#read%20current%20clipboard)
T}
T{
FenrirKey + C
T}@T{
copy marked text to clipboard (#copy%20marked%20to%20clipboard)
T}
T{
FenrirKey + V
T}@T{
paste clipboard contents (#paste%20clipboard)
T}
T{
FenrirKey + F5
T}@T{
import clipboard from file (#import%20clipboard%20from%20file)
T}
T{
FenrirKey + Alt + Shift +C
T}@T{
export clipboard to file (#export%20clipboard%20to%20file)
T}
T{
FenrirKey + CTRL + Shift + X
T}@T{
remove marks (#Remove%20Marks)
T}
T{
FenrirKey + X
T}@T{
set mark (#Set%20mark)
T}
T{
FenrirKey + Shift + X
T}@T{
announce marked text (#Get%20text%20between%20marks)
T}
T{
Linux specific
T}@T{
T}
T{
\f[C]<Unbound>\f[]
T}@T{
export clipboard to X
T}
T{
FenrirKey + CTRL + Up
T}@T{
increases Alsa volume
T}
T{
FenrirKey + CTRL + Down
T}@T{
decreases Alsa volume
T}
.TE
.SS General
.SS quit Fenrir
.PP
Just stops fenrir.
#### shut up
.PP
Interrupt the current spoken.
### Review Modes
.PP
Fenrir provides a virtual cursor, with it you can navigate all over the
screen without changing the text cursor.
.PP
Using the review feature will open the review mode automatically.
.PP
The review cursor always starts from the text cursor.
Attention: after using the review mode, the review cursor will stay open
until you use the \[aq]\[aq]exit review\[aq]\[aq] shortcut.
.PP
Think when using clipboard operations and similar.
The review cursor is always prefered over the text cursor.
.PP
Fenrir sounds a bell sound if the used review command jumps to another
line or end of screen.
#### exit review
.PP
You can leave the review mode by pressing the \[aq]\[aq]exit
review\[aq]\[aq] shortcut.
#### review bottom
.PP
Set the review cursor to first column in the last line.
#### review top
.PP
Set the review cursor to the first column in the first line #### review
current line
.PP
Set the review cursor to the beginn of the the current line and review
it.
#### review previous line
.PP
Set the review cursor to the previous line and review it.
#### review next line
.PP
Set the review cursor to the next line and review it.
#### review line beginning
.PP
Set the review cursor to the begin of the current line #### review line
ending
.PP
Set the review cursor to the end of the current line #### review line
first character
.PP
Set the review cursor the first char (that is not space) in the current
line and review it.
#### review line last character
.PP
Set the review cursor the last char (that is not space) in the current
line and review it.
#### review current word
.PP
Sets the review cursor to the beginning of the current word and review
it.
#### review previous word
.PP
Sets the review cursor to the beginning of the previous word and review
it.
#### review next word
.PP
Sets the review cursor to the beginning of the next word and review it.
#### review current word phonetic
.PP
Sets the review cursor to the beginning of the current word and spell it
phonetic.
#### review previous word phonetic
.PP
Sets the review cursor to the beginning of the previous word and spell
it phonetic.
#### review next word phonetic
.PP
Sets the review cursor to the beginning of the next word and spell it
phonetic.
#### review current character
.PP
Does not change the review cursor.
Just announce the current char.
#### review previous character
.PP
Sets review cursor to the previous column and review it #### review next
character
.PP
Sets review cursor to the next column and review it #### review current
character phonetic
.PP
Does not change the review cursor.
Just announce the current char phonetic.
#### review previous character phonetic
.PP
Sets review cursor to the previous column and announce the char
phonetic.
#### review next character phonetic
.PP
Sets review cursor to the next column and announce the char phonetic.
#### review up
.PP
Set the review cursor in the same column one line above the current one
and review it.
#### review down
.PP
Set the review cursor in the same column one line below the current one
and review it.
### Handling marking
.PP
A mark defines a point of origin or end to prepare to copy or paste a
block of text.
\\ Examples where you need marks are:
.IP \[bu] 2
copy to clipboard
.IP \[bu] 2
set window application
.IP \[bu] 2
set bookmark 1 \- X #### Set mark
.PP
How to set a mark: 1.
navigate with review or textcursor to the position you want to set the
mark.
Attention: if a review cursor is set, that is the prefered.
If you want to use text cursor, be sure that you are not in review mode.
2.
press shortcut for \[aq]\[aq]set mark\[aq]\[aq] you can set two marks
(begin and end).
Some commands allow some simpler usecases just using the whole line if
only one mark is set.
you may want to try this out.
#### Get text between marks
.PP
To get the text that is currently between your marks press shortcut for
\[aq]\[aq]marked text\[aq]\[aq].\\ #### Remove Marks
.PP
You can remove all current marks by pressing the shortcut for
\[aq]\[aq]remove marks\[aq]\[aq].
Changing the screen also removes the marks.
### Screen Interaction
.PP
Fenrir provides several methods to interact with the current screen.
#### forward keypress
.PP
This just forwards the next shortcut to the screen Fenrir shortcut or
not.
This is useful if the currently pressed shortcut is also in use by
Fenrir.
#### Clipboard
.PP
Fenrir provides a clipboard with multible items represented by a list.
You navigate throught the list and paste the selected clipboard.
##### copy marked to clipboard
.PP
To copy something to the clipboard you need to set one or two marks.
if you set one mark, the text between the mark and your current cursor
is copied to clipboard.
Setting two marks just copies the text between the marks into the
clipboard.
If you copy something it is always placed as the first item on your
clipboard.
##### clear clipboard
.PP
You can remove all items from the current clipboard by \[aq]\[aq]clear
clipboard\[aq]\[aq] functionality.
##### first clipboard
.PP
This moves quick to the first item of the clipboard.
##### last clipboard
.PP
This moves quick to the last item of the clipboard.
##### previous clipboard
.PP
Go to previous item in the clipboard.
##### next clipboard
.PP
Go to next item on the clipboard.
##### read current clipboard
.PP
Read the content of the current item of the clipboard.
##### paste clipboard
.PP
Pass whatever item is currently selected by first, last, prev or next
clipboard commands.
if no special clipboard is selected the (last copied) is used.
##### export clipboard to file
.PP
This allows you to export the current clipboard to a configurable
filepath.
This is useful to share the clipboard with a graphical desktop.
##### import clipboard from file
.PP
Import a clipboard from a configurable file.
This is useful to share the clipboard with a graphical desktop.
### Quick Settings
.PP
Fenrir provides shortcuts to change settings temporarily and on the fly
without the need to permanently change the
\[aq]\[aq]settings.conf\[aq]\[aq] file.
#### toggle braille
.PP
Enables and disables Braille.
This is not persistent stored in your \[aq]\[aq]settings.conf\[aq]\[aq]
but during run time.
#### toggle sound
.PP
Enables and disables sound.
This is not persistent stored in your \[aq]\[aq]settings.conf\[aq]\[aq]
but during run time.
#### toggle speech
.PP
Enables and disables speech.
This is not persistent stored in your \[aq]\[aq]settings.conf\[aq]\[aq]
but during run time.
#### disable speech temporarily
.PP
Disables the speech until next key press.
it might be useful if you want to listen to music or similar.
As soon as a key is pressed it is going to be enabled again.
#### toggle punctuation level
.PP
Cycle between all available punctuation levels.
This is not persistent stored in your \[aq]\[aq]settings.conf\[aq]\[aq]
but during run time.
#### toggle auto spell check
.PP
Enables and disables automatic spellchecker (when typing).
This is not persistent stored in your \[aq]\[aq]settings.conf\[aq]\[aq]
but during run time.
#### toggle emoticons
.PP
Enables and disables emoticons.
This is not persistent stored in your \[aq]\[aq]settings.conf\[aq]\[aq]
but during runtime.
#### toggle output
.PP
Enables and disables all output at once (sound, Braille, speech).
This is not persistent stored in your \[aq]\[aq]settings.conf\[aq]\[aq]
but during run time.
#### toggle auto read
.PP
Enables and disables what is automatically spoken.
This is not persistent stored in your \[aq]\[aq]settings.conf\[aq]\[aq]
but during run time.
#### toggle auto time
.PP
Enables and disables auto time functionality.
This is not persistent stored in your \[aq]\[aq]settings.conf\[aq]\[aq]
but during run time.
#### toggle highlight tracking
.PP
Enables and disables highlight tracking.
This is not persistent stored in your \[aq]\[aq]settings.conf\[aq]\[aq]
but during run time.
#### increase speech volume
.PP
Increase the volume of the speech.
This is not persistent stored in your \[aq]\[aq]settings.conf\[aq]\[aq]
but during runtime.
#### decrease speech volume
.PP
Decrease the volume of the speech.
This is not persistent stored in your \[aq]\[aq]settings.conf\[aq]\[aq]
but during runtime.
#### increase speech rate
.PP
Increase the rate of the speech.
This is not persistent stored in your \[aq]\[aq]settings.conf\[aq]\[aq]
but during runtime.
#### decrease speech rate
.PP
Decrease the rate of the speech.
This is not persistent stored in your \[aq]\[aq]settings.conf\[aq]\[aq]
but during runtime.
#### increase speech pitch
.PP
Increase the pitch of the speech.
This is not persistent stored in your \[aq]\[aq]settings.conf\[aq]\[aq]
but during runtime.
#### decrease speech pitch
.PP
Decrease the pitch of the speech.
This is not persistent stored in your \[aq]\[aq]settings.conf\[aq]\[aq]
but during runtime.
#### increase sound volume
.PP
Increase the volume of the sound.
This is not persistent stored in your \[aq]\[aq]settings.conf\[aq]\[aq]
but during runtime.
#### decrease sound volume
.PP
Decrease the volume of the sound.
This is not persistent stored in your \[aq]\[aq]settings.conf\[aq]\[aq]
but during runtime.
### Window Mode
.PP
Fenrir supports window mode, a window is a partial area of the screen.
#### Create Window
.PP
To create a window you need to do the following: 1.
set a beginning mark (as the start of the window) 2.
set an end mark (where the window should end) 3.
press \[aq]\[aq]set window application\[aq]\[aq] shortcut.
Now Fenrir ignores anything outside of the window.\\ #### Remove Window
.PP
You can remove the window by pressing \[aq]\[aq]the clear window
application\[aq]\[aq] shortcut.
Now Fenrir will read everything on the screen again.
### Tracking Modes
.PP
Different types of tracking are currently supported See section
Focus (#Focus) in \[aq]\[aq]settings.conf\[aq]\[aq] for more
information.
#### Cursor Tracking
.PP
This follows the text cursor.
This is the typical way an application works.
This is used by:
.IP \[bu] 2
almost any shell such as (Bash, Zsh, sh)
.IP \[bu] 2
vim
.IP \[bu] 2
nano
.IP \[bu] 2
emacs
.IP \[bu] 2
mutt
.IP \[bu] 2
tintin++ #### Highlight Tracking
.PP
In some applications there are no text cursors.
In those applications cursor changes are represented by different colors
or attributes (underlined or bold).
This mode tracks and announces these changes for you.
This is used by:
.IP
.nf
\f[C]
*\ wifi\-menu
*\ dialog
*\ alpine
\f[]
.fi
.SS Tutorial Mode
.PP
Fenrir provides a Tutorial mode.
When you enter tutorial mode, screen reader commands are intercepted and
explained instead of executing them.
\[aq]\[aq]Arrow up\[aq]\[aq] and \[aq]\[aq]Arrow Down\[aq]\[aq] let you
navigate through a list of all available commands with shortcuts and
description.
Pressing escape leaves the tutorial mode.
.SS Information
.SS Time
.PP
Announces the current Time.
#### Date
.PP
Announces the current Date.
#### Bookmarks
.PP
Bookmarks provide quick access to part of the screen without the need to
navigate to the area.
By default Fenrir provides 10 bookmarks.
Those can be set and accessed via shortcut.
This is useful for status lines or other information where the position
does not change.
##### set Bookmark X
.PP
You need to set the bookmark first.
For that you have to set one or two lines for use.
1.
Set marks (one or two) 2.
press shortcut for \[aq]\[aq]set bookmark X\[aq]\[aq].
X represents the number 1 \- 10.
##### read Bookmark X
.PP
If a bookmark is set you can access the area just by pressing the
\[aq]\[aq]bookmark X\[aq]\[aq] shortcut.
X represents the number 1 \- 10.
Bookmarks are dynamic.
That means the content changes with the screen.
##### clear Bookmark X
.PP
to remove a bookmark just press the \[aq]\[aq]clear bookmark X\[aq]\[aq]
shortcut.
X represents the number 1 \- 10.
Afterward the bookmark is no longer available.
#### cursor position
.PP
You can get information about the current cursor and its position by
using the "cursor position" functionality.
#### indent current line
.PP
Announce the current indent level of the current line.
It represents the number of trailing spaces of the line.
#### current screen
.PP
Reads all the current screen from the beginning to the end.
#### current screen before cursor
.PP
Reads current screen from the beginning of the screen to the current
cursor position.
#### current screen after cursor
.PP
Read anything after current cursor position to the end.
#### cursor read to end of line
.PP
Read from the current cursor position to the end of the current line.
#### cursor column
.PP
Read the current X position of a cursor (column of the current line).
#### cursor line number
.PP
Read the current Y position of a cursor (line number).
#### present first line
.PP
Reads just the first line.
this is maybe useful for status information.
#### present last line
.PP
Presets the last line.
This is maybe useful for status information.
#### last incoming
.PP
Repeat the last automatically incoming text.
## Input
.SS Echo
.PP
Fenrir provides different methods of echoing content:
.IP \[bu] 2
Word: Will speak each word after you push space
.IP \[bu] 2
Character: speak any letter you type on the screen
.IP \[bu] 2
Delete Character: speaks the character prior to the cursor when you push
backspace ### Silence on Key press
.SS Spellchecker
.PP
Fenrir has a built\-in spellchecker, it can invoke automatically while
typing or be called by a shortcut.
Commands to add or remove the current word to the dictionary are
included.
As using the spellchecker is enhanced usage.
You will need dictionary aspell\-\f[C]<language>\f[].
See section General (#General) in \[aq]\[aq]settings.conf\[aq]\[aq] for
more information.
#### spell check
.PP
Invokes the spellcheck on the word that contains the Review or text
cursor.
#### add word to spell check
.PP
Adds the word under the Review or Text cursor to the dictionary.
#### removes word from spell check
.PP
Removes the word under the Review or Text cursor from the dictionary.
## Announcements
.SS Emoticons
.PP
If you want to replace ":)" emoticons with "smile" in speech you can use
this feature.
It can be toggled on or off.
You can define emoticons in a dictionary, please see Emoticon
Dictionary.
See section General (#General) in \[aq]\[aq]settings.conf\[aq]\[aq] to
see how to enable or disable this feature.
.SS Time
.PP
Announce the time at periodical increments, To track the time easily.
You can define 2 different ways of time announcements.
1.
periodic 2.
on fix minutes
.PP
Example periodic, every 20 minutes "delaySec=20":
.IP
.nf
\f[C]
[time]
enabled=True
presentTime=True
presentDate=True
delaySec=20
onMinutes=
announce=True
interrupt=False\ \ \ \ 
\f[]
.fi
.PP
Example on fix minutes in an hour.
example every quarter "delaySec=0" and "onMinutes=00,15,30,45":
.IP
.nf
\f[C]
[time]
enabled=True
presentTime=True
presentDate=True
#delaySec\ is\ repected\ bevore\ onMinutes\ so\ it\ need\ to\ be\ set\ to\ 0
delaySec=0\ 
onMinutes=00,15,30,45
announce=True
interrupt=False\ \ \ \ \ \ 
\f[]
.fi
.SS Promoted List
.PP
Promoted Lists are a nice feature if you are away from your computer or
performing more longer tasks.
you can define a list of words which you want to hear a sound icon for
after a period of inactivity.
Example if the word "Chrys" appears after 120 Seconds of inactivity:
[promote] enabled=True
.PD 0
.P
.PD
inactiveTimeoutSec=120 list=Chrys See section Promote (#Promote) in
\[aq]\[aq]settings.conf\[aq]\[aq] for more information.
### Punctuation
.PP
Fenrir handles punctuation levels and names for you with several
provided dictionaries.
.PP
See levelDict See punctuationDict ## Braille
.PP
Fenrir provides Braille support in Version >= 2.0.
See section Braille (#Braille) in \[aq]\[aq]settings.conf\[aq]\[aq] for
more information.
### braille flush
.PP
If a message appears on the Braille device you can flush it to get back
to the review\- or system cursor ### Braille pan left
.PP
If a line is longer than your Braille devices you can move the view
(called panning) to the left.
So you can read stuff without the need to move the review\- or system
cursor.
### Braille pan right
.PP
If a line is longer than your Braille devices you can move the view
(called panning) to the right.
So you can read stuff without the need to move the review\- or system
cursor.
### braille return to cursor
.PP
When you have finished reading the line on the Braille device using
panning, the focus can be returned to the current used cursor by using
"return to cursor" command.
## Dictionary
.PP
You can make use of different kinds of built\-in dictionary\[aq]s.
A dictionary has a name and list of keys and values separated by :===:
Example: [customDict] Chrys:===:Chrys is cool lollipop:===:lolli that
means that every instance "chrys" is displayed, speech will say Chrys is
cool.
"lollipop" is spoken as "lolli".
Before making changes to a dictionary we recommend making a backup of
your current dictionary in case future updates overwrite your local
changes.
### Punctuation
.SS Level
.PP
The punctuation level dict contains lists with "what punctuation is
spoken in what level".
the default one looks like this: [levelDict] none:===:
some:===:.\-$~+*\-/\\\@  most:===:.,:\-$~+*\-/\@!#%^&\f[I]()[]}{\f[C]<>\f[];
all:===:!"#$%& \[aq]()\f[]+,\-./:;\f[C]<=>\f[]?\@[\\]^_`{|}~ the level
"none" has no values.
so it should not speak any punctuation (sadly this is not respected by
every TTS system) if "some" is the current level the following are
spoken: dot dash dollar tilde plus star slash backslash at.
same for most and all, you can add new levels.
if you cycle punctuation levels they are recognized.
the default punctuation level is set in settings.conf.
The default is "some".
#### Punctuation
.PP
The punctuation dictionary "[punctDict]" contains how the punctuation is
spoken.
Example: [punctDict] \f[I]:===:line
.PD 0
.P
.PD
speaks an \f[] as "line".
.PD 0
.P
.PD
[punctDict] \f[I]:===:underscore speaks an \f[] as underscore.
for question mark an ?
is appended to the word that the TTS system can announce the question
correctly.
.PD 0
.P
.PD
### Custom
.PP
The dict "[customDict]" is just for your own use, it just replace the
key with the value without any special functionality.
This might be used to fix incorrectly spoken words, make words more
common, shorter or just for fun.
:) ### Emoticons
.PP
The Emoticons dictionary "[emoticonDict]" by default contains some
emoticons.
it can replace ":)" with "smile" or "XD" with "loool" Making chat more
colorful.
A nice feature with this dictionary is that you can toggle the
substitution on or off during run time or in settings.conf.
This is useful because while doing programming or other serious work you
want to hear colons and perryns not smiles.
# Configuration
.PP
You can configure Fenrir in the following places (ordered by priority):
1.
Commandline Parameters \[aq]\[aq]\-o\[aq]\[aq] see Set settings
coption (#Set%20settings%20coption) 2.
/etc/fenrir/settings/settings.conf see Settigns (#Settings) 3.
\f[C]<sourceTree>\f[]/config/settings/settings.conf see
Settigns (#Settings) 4.
hard coded defaults ## Commandline Arguments
.SS Set settings option
.PP
You can specify options that overwrite the setting.conf.
This is done with \[aq]\[aq]\-o \f[C]<list\ of\ options>\f[] parameter.
The list of options have the following syntax fenrir \-o
"section#setting=value;section#setting=value"
.PP
For example changing the sound driver to gstreamer and disabling Braille
.PD 0
.P
.PD
fenrir \-o "sound#driver=gstreamerDriver;braille#enabled=False=False" or
change the debug level to verbose fenrir \-o "general#debugLevel=3" You
can find the available sections and variables here <#Settings> See
Syntax #settings.conf syntax (#settings.conf%20syntax) ### settings.conf
syntax
.PP
the syntax of the settings.conf (#Settings) is quite simple and similar
to a "*.ini" file, there are 4 different elements.
1.
Sections 2.
Settings 3.
Values 4.
Comments
.PP
A comment starts with a # and is ignored by Fenrir.
# this is a comment To group settings we have sections.
A section can look like this: [Section] A setting looks like this:
settingName=Value
.PP
Example: sound (#sound) # Turn sound on or off: enabled=True # Select
the driver used to play sounds, choices are genericDriver and
gstreamerDriver.
# Sox is default.
driver=genericDriver
.SS Settings
.SS Sound
.PP
The sound is configured in section \[aq]\[aq]sound (#sound)\[aq]\[aq].
.PP
Turn sound on or off: enabled=True Values: on=\[aq]\[aq]True\[aq]\[aq],
off=\[aq]\[aq]False\[aq]\[aq]
.PP
Select the driver used to play sounds.
The genericDriver using Sox is the default.
.IP
.nf
\f[C]
driver=genericDriver
\f[]
.fi
.PP
Available Drivers:
.IP \[bu] 2
\[aq]\[aq]genericDriver\[aq]\[aq] using the generic driver, for Fenrir
<1.5 just use \[aq]\[aq]generic\[aq]\[aq]
.IP \[bu] 2
\[aq]\[aq]gstreamerDriver\[aq]\[aq] using the gstreamer, for Fenrir <1.5
just use \[aq]\[aq]gstreamer\[aq]\[aq]
.PP
These are the pack of sounds used for sound icons.
theme=default By default we ship two sound packs.
1.
\[aq]\[aq]default\[aq]\[aq] opus encoded, for newer Sox versions 2.
\[aq]\[aq]default\-wav\[aq]\[aq] wav encoded, just for compatibility
Sound packs are located at /usr/share/sounds/fenrir/
.PP
Sound volume controls how loud the sounds for your selected sound pack
are.
volume=1.0 Values: \[aq]\[aq]0.0\[aq]\[aq] is quietest,
\[aq]\[aq]1.0\[aq]\[aq] is loudest.
.SS Generic Driver
.PP
The generic sound driver uses shell commands for play sound and
frequencies.
.PP
\[aq]\[aq]genericPlayFileCommand\[aq]\[aq] defines the command that is
used to play a sound file.
genericPlayFileCommand=\f[C]<your\ command\ for\ playing\ a\ file>\f[]
\[aq]\[aq]genericFrequencyCommand\[aq]\[aq] defines the command that is
used playing frequencies.
genericFrequencyCommand=\f[C]<your\ command\ for\ playing\ a\ frequence>\f[]
.PP
The following variables are substituted in
\[aq]\[aq]genericPlayFileCommand\[aq]\[aq] and
\[aq]\[aq]genericFrequencyCommand\[aq]\[aq]:
.IP \[bu] 2
\[aq]\[aq]fenrirVolume\[aq]\[aq] = the current volume setting
.IP \[bu] 2
\[aq]\[aq]fenrirSoundFile\[aq]\[aq] = the sound file for an sound icon
.IP \[bu] 2
\[aq]\[aq]fenrirFrequence\[aq]\[aq] = the frequency to play
.IP \[bu] 2
\[aq]\[aq]fenrirDuration\[aq]\[aq] = the duration of the frequency
.PP
Example genericPlayFileCommand (default) genericPlayFileCommand=play \-q
\-v fenrirVolume fenrirSoundFile Example genericFrequencyCommand
(default) genericFrequencyCommand=play \-q \-v fenrirVolume \-n \-c1
synth fenrirDuration sine fenrirFrequence ### Speech
.PP
Speech is configured in section \[aq]\[aq][speech]\[aq]\[aq].
Turn speech on or off: enabled=True Values: on=\[aq]\[aq]True\[aq]\[aq],
off=\[aq]\[aq]False\[aq]\[aq]
.SH Select speech driver, options are speechdDriver (default),
genericDriver or espeakDriver:
.PP
driver=speechdDriver #driver=espeakDriver
.SH driver=genericDriver
.PP
Select the driver used to generate speech output.
.IP
.nf
\f[C]
driver=speechdDriver
\f[]
.fi
.PP
Available Drivers:
.IP \[bu] 2
\[aq]\[aq]genericDriver\[aq]\[aq] using the generic driver, for Fenrir
<1.5 this is not available
.IP \[bu] 2
\[aq]\[aq]speechdDriver\[aq]\[aq] using speech\-dispatcher, for Fenrir
<1.5 just use \[aq]\[aq]speechd\[aq]\[aq]
.IP \[bu] 2
\[aq]\[aq]espeakDriver\[aq]\[aq] using the espeak directly, for Fenrir
<1.5 just use \[aq]\[aq]espeak\[aq]\[aq]
.PP
The rate selects how fast Fenrir will speak.
rate=0.65 Values: Range Minimum:\[aq]\[aq]0.0\[aq]\[aq] is slowest,
Maximum:\[aq]\[aq]1.0\[aq]\[aq] is fastest.
.PP
Pitch controls the pitch of the voice.
pitch=0.5 Values: Range Minimum:\[aq]\[aq]0.0\[aq]\[aq] is lowest,
Maximum:\[aq]\[aq]1.0\[aq]\[aq] is highest.
.PP
A Pitch for capital letters can be set.
capitalPitch=0.9 Values: Range Minimum:\[aq]\[aq]0.0\[aq]\[aq] is
lowest, Maximum:\[aq]\[aq]1.0\[aq]\[aq] is highest.
.PP
The Volume controls the loudness of the voice.
volume=1.0 Values: Range Minimum:\[aq]\[aq]0.0\[aq]\[aq] is quietest,
Maximum:\[aq]\[aq]1.0\[aq]\[aq] is loudest.
.PP
Some speech drivers like speechdDriver can support various modules.
these can be set here.
module=espeak Values: Text, Consult speech\-dispatcher\[aq]s
configuration to see what modules are available.
.PP
Voice selects the varient you want to use, for example, f5 will use the
female voice #5 in Espeak, or if using the Espeak module in
Speech\-dispatcher.
To find out which voices are available, consult the documentation
provided with your selected synthesizer.
voice= Values: Text, see your TTS synths documentation what is
available.
.PP
Select the language you want Fenrir to use.
language=english\-us Values: Text, see your TTS synths documentation
what is available.
.PP
Read new text as it occurs autoReadIncoming=True Values:
on=\[aq]\[aq]True\[aq]\[aq], off=\[aq]\[aq]False\[aq]\[aq]
.SS Generic Driver
.PP
The generic speech driver uses shell commands for speech synthisus.
.PP
\[aq]\[aq]genericSpeechCommand\[aq]\[aq] defines the command that is
executed for creating speech The following variables are substituted in
\[aq]\[aq]genericSpeechCommand\[aq]\[aq]:
.IP \[bu] 2
\[aq]\[aq]FenrirText\[aq]\[aq] = is the text that should be spoken
.IP \[bu] 2
\[aq]\[aq]fenrirModule\[aq]\[aq] = may be the speech module like used in
speech\-dispatcher, not every TTY needs this
.IP \[bu] 2
\[aq]\[aq]fenrirLanguage\[aq]\[aq] = the language to speak in
.IP \[bu] 2
\[aq]\[aq]fenrirVoice\[aq]\[aq] = is the current voice that should be
used
.IP \[bu] 2
\[aq]\[aq]fenrirVolume\[aq]\[aq] = is replaced with the current volume
.IP \[bu] 2
\[aq]\[aq]fenrirPitch\[aq]\[aq] = is replaced with the current pitch
.IP \[bu] 2
\[aq]\[aq]fenrirRate\[aq]\[aq] = is replaced with the current speed
(speech rate)
.PP
Example genericSpeechCommand (default): genericSpeechCommand=espeak \-a
fenrirVolume \-s fenrirRate \-p fenrirPitch \-v fenrirVoice "fenrirText"
.PP
These are the minimum and maximum values of the TTS system used in
genericSpeechCommand.
They are needed to calculate the abstract range in volume, rate and
pitch 0.0 \- 1.0.
.IP
.nf
\f[C]
FenrirMinVolume=0
fenrirMaxVolume=200
fenrirMinPitch=0
fenrirMaxPitch=99
fenrirMinRate=80
fenrirMaxRate=450
\f[]
.fi
.PP
The current volume, pitch and rate is calculated like this value = min +
[volume,pitch,rate] * (min \- max ) ### Braille
.PP
Braille is a WIP and not ready yet.
Braille support can be configured in section
\[aq]\[aq][braille]\[aq]\[aq].
.PP
Turn braille on or off: enabled=False Values:
on=\[aq]\[aq]True\[aq]\[aq], off=\[aq]\[aq]False\[aq]\[aq]
.PP
Select the driver used for communication with a braille device.
driver=brlapiDriver Values: Text, available Driver Available Drivers:
.IP \[bu] 2
\[aq]\[aq]brlttyDriver\[aq]\[aq] using brltty for braille communication,
for Fenrir <1.5 just use \[aq]\[aq]brltty\[aq]\[aq]
.PP
The Braille layout can be configured here layout=en Values: Text, see
braille driver for layouts.
.PP
What should the flush timeout relate to flushMode=word Values: Text, an
flushMode Existing flushModes:
.IP \[bu] 2
\[aq]\[aq]word\[aq]\[aq] = flush after (number of words to display) *
seconds
.IP \[bu] 2
\[aq]\[aq]char\[aq]\[aq] = flush after (number of chars to display) *
seconds
.IP \[bu] 2
\[aq]\[aq]fix\[aq]\[aq] = flush after X seconds
.IP \[bu] 2
\[aq]\[aq]none\[aq]\[aq] = no automatic flush (manual via shortcut)
.PP
Seconds to flush (see flushMode) flushTimeout=3 Values: Integer, in
Seconds or \[aq]\[aq]\-1\[aq]\[aq] = no automatic flush (manual via
shortcut) The total flush time calculates in relation to flushMode.
.PP
How should the Braille cursor focus be tracked?
cursorFocusMode=page Values: Text, an existing cursor focus mode
Available cursor focus modes:
.IP \[bu] 2
\[aq]\[aq]page\[aq]\[aq] = if the cursor crosses the border move to next
page and start at begin
.IP \[bu] 2
\[aq]\[aq]fixCell\[aq]\[aq] = ajust the cursor on a special cell where
it is always placed.
the display scroll here more smooth.
.PP
Define the cell on the Braille device where Fenrir should scroll and
keep the cursor fixCursorOnCell=\-1 Values: Integer
.IP \[bu] 2
\[aq]\[aq]0\[aq]\[aq] = first cell on device,
.IP \[bu] 2
\[aq]\[aq]\-1\[aq]\[aq] = last cell on device
.IP \[bu] 2
\[aq]\[aq]>0\[aq]\[aq] = fix cell number
.PP
What cursor should Fenrir show on the Braille device
cursorFollowMode=review Values: Text, an exsiting cursor following mode.
Existing cursor following mode:
.IP \[bu] 2
\[aq]\[aq]none\[aq]\[aq] = no automatic toggle command used
.IP \[bu] 2
\[aq]\[aq]review\[aq]\[aq] = priority to review
.IP \[bu] 2
\[aq]\[aq]last\[aq]\[aq] = follow last used cursor
.PP
number of cells in panning (horizontal).
How many cell should be panned on press the routing key?
panSizeHorizontal=0 Values: Integer,
.IP \[bu] 2
\[aq]\[aq]0\[aq]\[aq] = display size
.IP \[bu] 2
\[aq]\[aq]>0\[aq]\[aq] number of cells ### Screen
.PP
The settings for screens, (TTY, PTY) are configured in the
\[aq]\[aq][screen]\[aq]\[aq] section.
.PP
The driver to get the information from the screen: driver=vcsaDriver
Available Drivers:
.IP \[bu] 2
\[aq]\[aq]vcsaDriver\[aq]\[aq] using the VCSA driver (for TTYs), for
Fenrir <1.5 just use \[aq]\[aq]vcsa\[aq]\[aq] The encoding of the screen
encoding=cp850 Values:\[aq]\[aq]cp850\[aq]\[aq] is used for Western
languages like USA or Europe.
.PP
The driver updates Fenrir with changes on the screen.
screenUpdateDelay=0.05 Values: in Seconds
.PP
If you want Fenrir to not be active on any screen for various reasons.
Maybe an X server or Wayland is running on that screen.
You can make Fenrir ignore it or multiple screens seperated by
\[aq]\[aq],\[aq]\[aq] with: suspendingScreen= Values: Depends on driver:
.IP \[bu] 2
VCSA: the number of the TTY.
TTY6 is \[aq]\[aq]6\[aq]\[aq].
Example ignore TTY1 and TTY2: suspendingScreen=1,2
.PP
There is also the ability to let Fenrir auto detect screens that are
running an X server.
So Screens running an GUI can be ignored.
autodetectSuspendingScreen=True Values: on=\[aq]\[aq]True\[aq]\[aq],
off=\[aq]\[aq]False\[aq]\[aq]
.SS Keyboard
.PP
The settings for keyboard and input related configuration is located in
the section \[aq]\[aq]keyboard (#keyboard)\[aq]\[aq] of the
\[aq]\[aq]settings.conf\[aq]\[aq] file.
.PP
Select the driver used for grabbing keybord input and for recieving
shortcuts.
driver=evdevDriver Values: Text, available Driver Available Drivers:
.IP \[bu] 2
\[aq]\[aq]evdevDriver\[aq]\[aq] uses the evdev input system of linux,
for Fenrir <1.5 just use \[aq]\[aq]evdev\[aq]\[aq]
.PP
You can let Fenrir know about what input devices are to be used.
device=ALL Values:
.IP \[bu] 2
\[aq]\[aq]ALL\[aq]\[aq] use all devices with key capabilities.
.IP \[bu] 2
\[aq]\[aq]NOMICE\[aq]\[aq] Exclude mices from handling.
.IP \[bu] 2
\f[C]<Device\ Name>\f[] just use the device with the given name.
.PP
Gives Fenrir exclusive access to the keyboard and lets it control
keystrokes.
This is needed to intercept Fenrir related shortcuts.
grabDevices=True Values: on=\[aq]\[aq]True\[aq]\[aq],
off=\[aq]\[aq]False\[aq]\[aq]
.PP
The following makes sense if you are using a second screenreader and
want to have some hooked events.
Fenrir ignores all shortcuts then.
ignoreShortcuts=False Values: on=\[aq]\[aq]True\[aq]\[aq],
off=\[aq]\[aq]False\[aq]\[aq]
.PP
The current keyboard layout used for shortcuts.
keyboardLayout=desktop Values: An absolute Path to a Keyboard definition
file or a Filename without extension located in
\[aq]\[aq]/etc/fenrir/keyboard\[aq]\[aq]
.PP
Announce characters while typing.
charEcho=False Values: on=\[aq]\[aq]True\[aq]\[aq],
off=\[aq]\[aq]False\[aq]\[aq]
.PP
Announce deleted characters charDeleteEcho=True Values:
on=\[aq]\[aq]True\[aq]\[aq], off=\[aq]\[aq]False\[aq]\[aq]
.PP
Announce word after pressing space wordEcho=False Values:
on=\[aq]\[aq]True\[aq]\[aq], off=\[aq]\[aq]False\[aq]\[aq]
.PP
Interrupt speech on any keypress interruptOnKeyPress=False Values:
on=\[aq]\[aq]True\[aq]\[aq], off=\[aq]\[aq]False\[aq]\[aq]
.PP
You can filter the keys that speech should interrupt
interruptOnKeyPressFilter= Values: (List) empty = all keys, otherwise
interrupt with specified keys
.PP
The timeout that is used for double tap shortcuts doubleTapTimeout=0.2
Values: Seconds ### General
.PP
Overall settings can be configured from the section
\[aq]\[aq]general (#general)\[aq]\[aq].
.PP
Set the current debug level: debugLevel=1 Values: off=0, error=1,
warning=2, info=3
.PP
the current punctuation and dict file in use: punctuationProfile=default
Values: Text, see available profiles in
\[aq]\[aq]/etc/fenrir/punctuation\[aq]\[aq] or in
\[aq]\[aq]sourceTree/config/punctuation\[aq]\[aq]
.PP
The current punctuation level in use: punctuationLevel=some Values:
Text, See available levels in the used punctuation file.
.PP
Respect pause for punctuations: respectPunctuationPause=True Values:
on=\[aq]\[aq]True\[aq]\[aq], off=\[aq]\[aq]False\[aq]\[aq]
.PP
Add a pause on Line break: newLinePause=True Values:
on=\[aq]\[aq]True\[aq]\[aq], off=\[aq]\[aq]False\[aq]\[aq]
.PP
Specify the path where the clipboard should be exported to.
See export clipboard to file (#export%20clipboard%20to%20file).
The variable \[aq]\[aq]$user\[aq]\[aq] is replaced by the current logged
username.
clipboardExportPath=/tmp/fenrirClipboard Values: Text, Systemfilepath
.PP
The number of available clipboards: numberOfClipboards=10 Values:
Integer, 1 \- 999
.PP
Replace emoticons like :) or ;) with text insertions: emoticons=True
Values: on=\[aq]\[aq]True\[aq]\[aq], off=\[aq]\[aq]False\[aq]\[aq]
.PP
Define the current Fenrir keys: fenrirKeys=KEY_KP0,KEY_META,KEY_INSERT
Values, Text list, separated by comma.
.PP
Define the current script keys: scriptKey=KEY_COMPOSE Values, Text list,
separated by comma.
.PP
The time format to be used for (time command) output:
timeFormat=%H:%M:%P Values: see python specification for
datetime.strftime (https///docs.python.org/3/library/datetime.html#strftime-and-strptime-behavior)
.PP
The date format to be used for (date command) output: dateFormat=%A, %B
%d, %Y Values: see python specification for
datetime.strftime (https///docs.python.org/3/library/datetime.html#strftime-and-strptime-behavior)
.PP
Enable or Disable spellcheck whilst typing: autoSpellCheck=True Values:
on=\[aq]\[aq]True\[aq]\[aq], off=\[aq]\[aq]False\[aq]\[aq]
.PP
The use of the dictionary with spellcheck: spellCheckLanguage=en_US
Values: Text, see aspell dictionary\[aq]s.
.PP
Folder Path for your scripts "scriptKey" functionality:
scriptPath=/usr/share/fenrir/scripts Values: Text, Existing path on file
system.
.PP
Override commands or create new ones without changing the Fenrir
defaults: commandPath=/usr/share/fenrir/commands Values: Text, Existing
path on file system.
Subfolders in commandPath are:
.IP \[bu] 2
\[aq]\[aq]commands\[aq]\[aq] = to create shortcut commands
.IP \[bu] 2
\[aq]\[aq]onInput\[aq]\[aq] = executed while typing
.IP \[bu] 2
\[aq]\[aq]onScreenChange\[aq]\[aq] = executed on change the screen
(change from TTY4 to TTY6)
.IP \[bu] 2
\[aq]\[aq]onScreenUpdate\[aq]\[aq] = executed when the screen is
captured
.SS Focus
.PP
The configuration for basic focus is in the section
\[aq]\[aq]focus (#focus)\[aq]\[aq].
Follow the text cursor: cursor=True Values: on=\[aq]\[aq]True\[aq]\[aq],
off=\[aq]\[aq]False\[aq]\[aq]
.PP
Follow highlighted text changes (Highlight Tracking): highlight=False
Values: on=\[aq]\[aq]True\[aq]\[aq], off=\[aq]\[aq]False\[aq]\[aq] ###
Review
.PP
Configurations for the review mode are in the section
\[aq]\[aq][review]\[aq]\[aq].
.PP
If "next word/ char" or "prev word/char" create a linebreak, announce
it: lineBreak=True Values: on=\[aq]\[aq]True\[aq]\[aq],
off=\[aq]\[aq]False\[aq]\[aq]
.PP
If "next word/ char" or "prev word/char" cannot be performed because you
reached the end of the screen, announce it: endOfScreen=True Values:
on=\[aq]\[aq]True\[aq]\[aq], off=\[aq]\[aq]False\[aq]\[aq]
.PP
Leave the review mode when pressing a key: leaveReviewOnKeypress=False
Values: on=\[aq]\[aq]True\[aq]\[aq], off=\[aq]\[aq]False\[aq]\[aq]
.PP
Leave the review mode when changing the screen (From TTY3 to TTY4):
leaveReviewOnScreenChange=True Values: on=\[aq]\[aq]True\[aq]\[aq],
off=\[aq]\[aq]False\[aq]\[aq] ### Promote
.PP
"Promoted Lists" are configured in the section
\[aq]\[aq][promote]\[aq]\[aq].
Turn Promoted Lists" on or off: enabled=True Values:
on=\[aq]\[aq]True\[aq]\[aq], off=\[aq]\[aq]False\[aq]\[aq]
.PP
The minimum time interval of inactivity to activate promoting.
By default it promotes after 120 Seconds inactivity:
inactiveTimeoutSec=120 Values: in Seconds
.PP
Define a list of promoted words comma seperated: list= Values: text
(comma seperated) Example to promote the word "nickname" or a bash
prompt: list=nickname,$:,#:
.SS Time
.PP
The automated time announcement is configured in the section
\[aq]\[aq]time (#time-2)\[aq]\[aq].
Time announcement is disabled by default.
Turn time announcement on or off: enabled=True Values:
on=\[aq]\[aq]True\[aq]\[aq], off=\[aq]\[aq]False\[aq]\[aq]
.PP
Should the time be announced: presentTime=True Values:
on=\[aq]\[aq]True\[aq]\[aq], off=\[aq]\[aq]False\[aq]\[aq]
.PP
Should the date be announced (just on date change): presentDate=True
Values: on=\[aq]\[aq]True\[aq]\[aq], off=\[aq]\[aq]False\[aq]\[aq]
.PP
Announce after a given period of seconds: delaySec=0 Value: in Seconds,
0 = Deactivated
.PP
Announce after fixed minutes in an hour.
if delaySec is >0 onMinutes is ignored: onMinutes=00,30 Example every 15
minutes: onMinutes=00,15,30,45
.PP
Just play a soundicon, (not interrupting): announce=True Values:
on=\[aq]\[aq]True\[aq]\[aq], off=\[aq]\[aq]False\[aq]\[aq]
.PP
Interrupt current speech for time announcement: interrupt=False Values:
on=\[aq]\[aq]True\[aq]\[aq], off=\[aq]\[aq]False\[aq]\[aq] #
Customization
.SS Scripting
.PP
Scripts can be in any language, bash, python, sh or others.
Place your scripts in the directory /usr/share/fenrir/scripts/ (the path
is configurable in settings.conf).
The script key is the applications key.
Usually this key can be found on the keyboard located just left of the
right most control key.
When you name a script, the key name appears in the script seperated by
the sequence \f[B]\-\f[].
So, for example, if you have a python weather script you want assigned
to the script key plus the letter w you would name the script
/usr/share/fenrir/scripts/weather__\-__key_w.py Then, to access the
script, simply press the script key and the letter w.
Scripts must be executable.
So, make sure to chmod 755 your script when you place it in the scripts
directory.
The script gets some parameters from fenrir when it is executed.
So that information is available in your script then.
.SS Parameterlist
.PP
.TS
tab(@);
l l.
T{
Parameter
T}@T{
Content
T}
_
T{
$1
T}@T{
Username of the current logged in user
T}
.TE
.SS Examples
.PP
Script that just speaks the current username when pressing ScriptKey +
H.\\ File:
\[aq]\[aq]/usr/share/fenrir/scripts/helloWorld__\-__key_h.sh\[aq]\[aq]:
#!/bin/bash echo $1
.SS Commands
.PP
You can place your own commands in "/usr/share/fenrir/commands" (path is
configurable in settings.conf).
Commands are python files with a special scheme.
You can assign them to a shortcut using the filename without an
extension or place them in a hook trigger like OnInput or
OnScreenChange.
For further information see developer guide.
Good Examples:
"date.py" (https///github.com/chrys87/fenrir/blob/master/src/fenrir/commands/commands/date.py)
(announce the Date),
"shut_up.py" (https///github.com/chrys87/fenrir/blob/master/src/fenrir/commands/commands/shut_up.py)
(interrupt output) the basic scheme for a command is as follows:
.IP
.nf
\f[C]
from\ core\ import\ debug

class\ command():
\ \ def\ __init__(self):
\ \ \ \ \ \ pass
\ \ def\ initialize(self,\ environment):
\ \ \ \ \ \ self.env\ =\ environment
\ \ def\ shutdown(self):
\ \ \ \ \ \ pass
\ \ def\ getDescription(self):
\ \ \ \ \ \ return\ _(\[aq]No\ description\ found\[aq])
\ \ def\ run(self):
\ \ \ \ \ \ pass
\ \ def\ setCallback(self,\ callback):
\ \ \ \ \ \ pass
\f[]
.fi
.IP \[bu] 2
Template lives
here (https///github.com/chrys87/fenrir/blob/master/src/fenrir/commands/command_template.py)
.IP \[bu] 2
The class needs to have the name "command".
.IP \[bu] 2
"initialize" is running once whilst loading the command.
.IP \[bu] 2
"shutdown" is running on unload like the command (quit fenrir)
.IP \[bu] 2
"getDescriptsion" just returns an string.
That String is used in Tutorial Mode.
.IP \[bu] 2
"run" is executed when the command is invoked.
(shortcut is pressed, or trigger isn\[aq]t running)
.IP \[bu] 2
setCAllback is currently not used.
and has no functionality yet.
.SH Troubleshooting
.SS Fenrir does not start
.IP " 1." 4
Have you installed all the dependencies Support and
Requirements (#Support%20and%20Requirements)
.IP " 2." 4
Try using master, a lot of changes take place there to make Fenrir
compatible with more systems ## Fenrir does not utilize the shortcuts
.IP " 3." 4
Make sure you have python3\-evdev installed
.IP " 4." 4
Use the latest Fenrir version
.IP " 5." 4
Make sure that Fenrir has permission to /dev/input/* and /dev/uinput (or
run it as root) ## No sound at all
.IP " 6." 4
Run the script to configure Pulseaudio once as root and once as your
user.
This will setup Pulseaudio but require a restart of Pulseaudio.
The script is located in \[aq]\[aq]tools/configure_pulse.sh\[aq]\[aq]
.IP " 7." 4
Use ALSA
.IP " 8." 4
Configure Pulse system
wide (https///www.freedesktop.org/wiki/Software/PulseAudio/Documentation/User/SystemWide/)
(Not recommended)
.IP " 9." 4
Use gstreamerDriver: change \[aq]\[aq]settings.conf\[aq]\[aq] in the
section \[aq]\[aq]sound\[aq]\[aq] the line
\[aq]\[aq]driver=genericDriver\[aq]\[aq] to
\[aq]\[aq]driver=gstreamerDriver\[aq]\[aq]
.IP "10." 4
Use wave sound\-icons: change \[aq]\[aq]settings.conf\[aq]\[aq] in the
section \[aq]\[aq]sound\[aq]\[aq] the line
\[aq]\[aq]theme=default\[aq]\[aq] to
\[aq]\[aq]theme=default\-wav\[aq]\[aq]
.IP "11." 4
Use most current version of sox (http://sox.sourceforge.net/) with opus
support
.IP "12." 4
Try apulse (https///github.com/i-rinat/apulse) (not tested by myself but
might work).
Please give me feedback if you try it out.
## You get sound\-icons but no speech
.IP "13." 4
If you are using speech\-dispatcher run "spd\-conf" once as user and as
root.
.IP "14." 4
You can test if speech\-dispatcher works by invoking it as root\\
\[aq]\[aq]sudo spd\-say "hello world"\[aq]\[aq] ## Bugreports and
feature requests
.PP
Please report Bugs and feature requests to:
https://github.com/chrys87/fenrir/issues (https///github.com/chrys87/fenrir/issues)
.PP
for bugs please provide a debug (#Howto%20create%20a%20debug%20file)
file that shows the issue.
### How\-to create a debug file
.IP "1." 3
Delete old debug stuff\\ \[aq]\[aq]sudo rm /var/log/fenrir.log\[aq]\[aq]
.IP "2." 3
Start fenrir in debug mode\\ \[aq]\[aq]sudo fenrir \-d\[aq]\[aq]
.IP "3." 3
Do your stuff to reproduce the problem
.IP "4." 3
Stop fenrir (\[aq]\[aq]fenrirKey + q\[aq]\[aq]) the debug file is
located in \[aq]\[aq]/var/log/fenrir.log\[aq]\[aq]
.PP
Please be as precise as possible to make it easy to solve the problem.