Initial commit, very few changes from orca 45. Added xfce4-notification daemon support.

This commit is contained in:
Storm Dragon 2024-10-16 17:06:34 -04:00
parent cef8363cfd
commit a523205ac2
1447 changed files with 1537893 additions and 2 deletions

1
ABOUT-NLS Normal file
View File

@ -0,0 +1 @@
<https://www.gnu.org/software/gettext/manual/html_node/Users.html>

7
AUTHORS Normal file
View File

@ -0,0 +1,7 @@
Marc Mulcahy
Willie Walker
Mike Pedersen
Rich Burridge
Joanmarie Diggs
Eitan Isaacson
Scott Haeger

502
COPYING Normal file
View File

@ -0,0 +1,502 @@
GNU LESSER GENERAL PUBLIC LICENSE
Version 2.1, February 1999
Copyright (C) 1991, 1999 Free Software Foundation, Inc.
51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
Everyone is permitted to copy and distribute verbatim copies
of this license document, but changing it is not allowed.
[This is the first released version of the Lesser GPL. It also counts
as the successor of the GNU Library Public License, version 2, hence
the version number 2.1.]
Preamble
The licenses for most software are designed to take away your
freedom to share and change it. By contrast, the GNU General Public
Licenses are intended to guarantee your freedom to share and change
free software--to make sure the software is free for all its users.
This license, the Lesser General Public License, applies to some
specially designated software packages--typically libraries--of the
Free Software Foundation and other authors who decide to use it. You
can use it too, but we suggest you first think carefully about whether
this license or the ordinary General Public License is the better
strategy to use in any particular case, based on the explanations below.
When we speak of free software, we are referring to freedom of use,
not price. Our General Public Licenses are designed to make sure that
you have the freedom to distribute copies of free software (and charge
for this service if you wish); that you receive source code or can get
it if you want it; that you can change the software and use pieces of
it in new free programs; and that you are informed that you can do
these things.
To protect your rights, we need to make restrictions that forbid
distributors to deny you these rights or to ask you to surrender these
rights. These restrictions translate to certain responsibilities for
you if you distribute copies of the library or if you modify it.
For example, if you distribute copies of the library, whether gratis
or for a fee, you must give the recipients all the rights that we gave
you. You must make sure that they, too, receive or can get the source
code. If you link other code with the library, you must provide
complete object files to the recipients, so that they can relink them
with the library after making changes to the library and recompiling
it. And you must show them these terms so they know their rights.
We protect your rights with a two-step method: (1) we copyright the
library, and (2) we offer you this license, which gives you legal
permission to copy, distribute and/or modify the library.
To protect each distributor, we want to make it very clear that
there is no warranty for the free library. Also, if the library is
modified by someone else and passed on, the recipients should know
that what they have is not the original version, so that the original
author's reputation will not be affected by problems that might be
introduced by others.
Finally, software patents pose a constant threat to the existence of
any free program. We wish to make sure that a company cannot
effectively restrict the users of a free program by obtaining a
restrictive license from a patent holder. Therefore, we insist that
any patent license obtained for a version of the library must be
consistent with the full freedom of use specified in this license.
Most GNU software, including some libraries, is covered by the
ordinary GNU General Public License. This license, the GNU Lesser
General Public License, applies to certain designated libraries, and
is quite different from the ordinary General Public License. We use
this license for certain libraries in order to permit linking those
libraries into non-free programs.
When a program is linked with a library, whether statically or using
a shared library, the combination of the two is legally speaking a
combined work, a derivative of the original library. The ordinary
General Public License therefore permits such linking only if the
entire combination fits its criteria of freedom. The Lesser General
Public License permits more lax criteria for linking other code with
the library.
We call this license the "Lesser" General Public License because it
does Less to protect the user's freedom than the ordinary General
Public License. It also provides other free software developers Less
of an advantage over competing non-free programs. These disadvantages
are the reason we use the ordinary General Public License for many
libraries. However, the Lesser license provides advantages in certain
special circumstances.
For example, on rare occasions, there may be a special need to
encourage the widest possible use of a certain library, so that it becomes
a de-facto standard. To achieve this, non-free programs must be
allowed to use the library. A more frequent case is that a free
library does the same job as widely used non-free libraries. In this
case, there is little to gain by limiting the free library to free
software only, so we use the Lesser General Public License.
In other cases, permission to use a particular library in non-free
programs enables a greater number of people to use a large body of
free software. For example, permission to use the GNU C Library in
non-free programs enables many more people to use the whole GNU
operating system, as well as its variant, the GNU/Linux operating
system.
Although the Lesser General Public License is Less protective of the
users' freedom, it does ensure that the user of a program that is
linked with the Library has the freedom and the wherewithal to run
that program using a modified version of the Library.
The precise terms and conditions for copying, distribution and
modification follow. Pay close attention to the difference between a
"work based on the library" and a "work that uses the library". The
former contains code derived from the library, whereas the latter must
be combined with the library in order to run.
GNU LESSER GENERAL PUBLIC LICENSE
TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
0. This License Agreement applies to any software library or other
program which contains a notice placed by the copyright holder or
other authorized party saying it may be distributed under the terms of
this Lesser General Public License (also called "this License").
Each licensee is addressed as "you".
A "library" means a collection of software functions and/or data
prepared so as to be conveniently linked with application programs
(which use some of those functions and data) to form executables.
The "Library", below, refers to any such software library or work
which has been distributed under these terms. A "work based on the
Library" means either the Library or any derivative work under
copyright law: that is to say, a work containing the Library or a
portion of it, either verbatim or with modifications and/or translated
straightforwardly into another language. (Hereinafter, translation is
included without limitation in the term "modification".)
"Source code" for a work means the preferred form of the work for
making modifications to it. For a library, complete source code means
all the source code for all modules it contains, plus any associated
interface definition files, plus the scripts used to control compilation
and installation of the library.
Activities other than copying, distribution and modification are not
covered by this License; they are outside its scope. The act of
running a program using the Library is not restricted, and output from
such a program is covered only if its contents constitute a work based
on the Library (independent of the use of the Library in a tool for
writing it). Whether that is true depends on what the Library does
and what the program that uses the Library does.
1. You may copy and distribute verbatim copies of the Library's
complete source code as you receive it, in any medium, provided that
you conspicuously and appropriately publish on each copy an
appropriate copyright notice and disclaimer of warranty; keep intact
all the notices that refer to this License and to the absence of any
warranty; and distribute a copy of this License along with the
Library.
You may charge a fee for the physical act of transferring a copy,
and you may at your option offer warranty protection in exchange for a
fee.
2. You may modify your copy or copies of the Library or any portion
of it, thus forming a work based on the Library, and copy and
distribute such modifications or work under the terms of Section 1
above, provided that you also meet all of these conditions:
a) The modified work must itself be a software library.
b) You must cause the files modified to carry prominent notices
stating that you changed the files and the date of any change.
c) You must cause the whole of the work to be licensed at no
charge to all third parties under the terms of this License.
d) If a facility in the modified Library refers to a function or a
table of data to be supplied by an application program that uses
the facility, other than as an argument passed when the facility
is invoked, then you must make a good faith effort to ensure that,
in the event an application does not supply such function or
table, the facility still operates, and performs whatever part of
its purpose remains meaningful.
(For example, a function in a library to compute square roots has
a purpose that is entirely well-defined independent of the
application. Therefore, Subsection 2d requires that any
application-supplied function or table used by this function must
be optional: if the application does not supply it, the square
root function must still compute square roots.)
These requirements apply to the modified work as a whole. If
identifiable sections of that work are not derived from the Library,
and can be reasonably considered independent and separate works in
themselves, then this License, and its terms, do not apply to those
sections when you distribute them as separate works. But when you
distribute the same sections as part of a whole which is a work based
on the Library, the distribution of the whole must be on the terms of
this License, whose permissions for other licensees extend to the
entire whole, and thus to each and every part regardless of who wrote
it.
Thus, it is not the intent of this section to claim rights or contest
your rights to work written entirely by you; rather, the intent is to
exercise the right to control the distribution of derivative or
collective works based on the Library.
In addition, mere aggregation of another work not based on the Library
with the Library (or with a work based on the Library) on a volume of
a storage or distribution medium does not bring the other work under
the scope of this License.
3. You may opt to apply the terms of the ordinary GNU General Public
License instead of this License to a given copy of the Library. To do
this, you must alter all the notices that refer to this License, so
that they refer to the ordinary GNU General Public License, version 2,
instead of to this License. (If a newer version than version 2 of the
ordinary GNU General Public License has appeared, then you can specify
that version instead if you wish.) Do not make any other change in
these notices.
Once this change is made in a given copy, it is irreversible for
that copy, so the ordinary GNU General Public License applies to all
subsequent copies and derivative works made from that copy.
This option is useful when you wish to copy part of the code of
the Library into a program that is not a library.
4. You may copy and distribute the Library (or a portion or
derivative of it, under Section 2) in object code or executable form
under the terms of Sections 1 and 2 above provided that you accompany
it with the complete corresponding machine-readable source code, which
must be distributed under the terms of Sections 1 and 2 above on a
medium customarily used for software interchange.
If distribution of object code is made by offering access to copy
from a designated place, then offering equivalent access to copy the
source code from the same place satisfies the requirement to
distribute the source code, even though third parties are not
compelled to copy the source along with the object code.
5. A program that contains no derivative of any portion of the
Library, but is designed to work with the Library by being compiled or
linked with it, is called a "work that uses the Library". Such a
work, in isolation, is not a derivative work of the Library, and
therefore falls outside the scope of this License.
However, linking a "work that uses the Library" with the Library
creates an executable that is a derivative of the Library (because it
contains portions of the Library), rather than a "work that uses the
library". The executable is therefore covered by this License.
Section 6 states terms for distribution of such executables.
When a "work that uses the Library" uses material from a header file
that is part of the Library, the object code for the work may be a
derivative work of the Library even though the source code is not.
Whether this is true is especially significant if the work can be
linked without the Library, or if the work is itself a library. The
threshold for this to be true is not precisely defined by law.
If such an object file uses only numerical parameters, data
structure layouts and accessors, and small macros and small inline
functions (ten lines or less in length), then the use of the object
file is unrestricted, regardless of whether it is legally a derivative
work. (Executables containing this object code plus portions of the
Library will still fall under Section 6.)
Otherwise, if the work is a derivative of the Library, you may
distribute the object code for the work under the terms of Section 6.
Any executables containing that work also fall under Section 6,
whether or not they are linked directly with the Library itself.
6. As an exception to the Sections above, you may also combine or
link a "work that uses the Library" with the Library to produce a
work containing portions of the Library, and distribute that work
under terms of your choice, provided that the terms permit
modification of the work for the customer's own use and reverse
engineering for debugging such modifications.
You must give prominent notice with each copy of the work that the
Library is used in it and that the Library and its use are covered by
this License. You must supply a copy of this License. If the work
during execution displays copyright notices, you must include the
copyright notice for the Library among them, as well as a reference
directing the user to the copy of this License. Also, you must do one
of these things:
a) Accompany the work with the complete corresponding
machine-readable source code for the Library including whatever
changes were used in the work (which must be distributed under
Sections 1 and 2 above); and, if the work is an executable linked
with the Library, with the complete machine-readable "work that
uses the Library", as object code and/or source code, so that the
user can modify the Library and then relink to produce a modified
executable containing the modified Library. (It is understood
that the user who changes the contents of definitions files in the
Library will not necessarily be able to recompile the application
to use the modified definitions.)
b) Use a suitable shared library mechanism for linking with the
Library. A suitable mechanism is one that (1) uses at run time a
copy of the library already present on the user's computer system,
rather than copying library functions into the executable, and (2)
will operate properly with a modified version of the library, if
the user installs one, as long as the modified version is
interface-compatible with the version that the work was made with.
c) Accompany the work with a written offer, valid for at
least three years, to give the same user the materials
specified in Subsection 6a, above, for a charge no more
than the cost of performing this distribution.
d) If distribution of the work is made by offering access to copy
from a designated place, offer equivalent access to copy the above
specified materials from the same place.
e) Verify that the user has already received a copy of these
materials or that you have already sent this user a copy.
For an executable, the required form of the "work that uses the
Library" must include any data and utility programs needed for
reproducing the executable from it. However, as a special exception,
the materials to be distributed need not include anything that is
normally distributed (in either source or binary form) with the major
components (compiler, kernel, and so on) of the operating system on
which the executable runs, unless that component itself accompanies
the executable.
It may happen that this requirement contradicts the license
restrictions of other proprietary libraries that do not normally
accompany the operating system. Such a contradiction means you cannot
use both them and the Library together in an executable that you
distribute.
7. You may place library facilities that are a work based on the
Library side-by-side in a single library together with other library
facilities not covered by this License, and distribute such a combined
library, provided that the separate distribution of the work based on
the Library and of the other library facilities is otherwise
permitted, and provided that you do these two things:
a) Accompany the combined library with a copy of the same work
based on the Library, uncombined with any other library
facilities. This must be distributed under the terms of the
Sections above.
b) Give prominent notice with the combined library of the fact
that part of it is a work based on the Library, and explaining
where to find the accompanying uncombined form of the same work.
8. You may not copy, modify, sublicense, link with, or distribute
the Library except as expressly provided under this License. Any
attempt otherwise to copy, modify, sublicense, link with, or
distribute the Library is void, and will automatically terminate your
rights under this License. However, parties who have received copies,
or rights, from you under this License will not have their licenses
terminated so long as such parties remain in full compliance.
9. You are not required to accept this License, since you have not
signed it. However, nothing else grants you permission to modify or
distribute the Library or its derivative works. These actions are
prohibited by law if you do not accept this License. Therefore, by
modifying or distributing the Library (or any work based on the
Library), you indicate your acceptance of this License to do so, and
all its terms and conditions for copying, distributing or modifying
the Library or works based on it.
10. Each time you redistribute the Library (or any work based on the
Library), the recipient automatically receives a license from the
original licensor to copy, distribute, link with or modify the Library
subject to these terms and conditions. You may not impose any further
restrictions on the recipients' exercise of the rights granted herein.
You are not responsible for enforcing compliance by third parties with
this License.
11. If, as a consequence of a court judgment or allegation of patent
infringement or for any other reason (not limited to patent issues),
conditions are imposed on you (whether by court order, agreement or
otherwise) that contradict the conditions of this License, they do not
excuse you from the conditions of this License. If you cannot
distribute so as to satisfy simultaneously your obligations under this
License and any other pertinent obligations, then as a consequence you
may not distribute the Library at all. For example, if a patent
license would not permit royalty-free redistribution of the Library by
all those who receive copies directly or indirectly through you, then
the only way you could satisfy both it and this License would be to
refrain entirely from distribution of the Library.
If any portion of this section is held invalid or unenforceable under any
particular circumstance, the balance of the section is intended to apply,
and the section as a whole is intended to apply in other circumstances.
It is not the purpose of this section to induce you to infringe any
patents or other property right claims or to contest validity of any
such claims; this section has the sole purpose of protecting the
integrity of the free software distribution system which is
implemented by public license practices. Many people have made
generous contributions to the wide range of software distributed
through that system in reliance on consistent application of that
system; it is up to the author/donor to decide if he or she is willing
to distribute software through any other system and a licensee cannot
impose that choice.
This section is intended to make thoroughly clear what is believed to
be a consequence of the rest of this License.
12. If the distribution and/or use of the Library is restricted in
certain countries either by patents or by copyrighted interfaces, the
original copyright holder who places the Library under this License may add
an explicit geographical distribution limitation excluding those countries,
so that distribution is permitted only in or among countries not thus
excluded. In such case, this License incorporates the limitation as if
written in the body of this License.
13. The Free Software Foundation may publish revised and/or new
versions of the Lesser General Public License from time to time.
Such new versions will be similar in spirit to the present version,
but may differ in detail to address new problems or concerns.
Each version is given a distinguishing version number. If the Library
specifies a version number of this License which applies to it and
"any later version", you have the option of following the terms and
conditions either of that version or of any later version published by
the Free Software Foundation. If the Library does not specify a
license version number, you may choose any version ever published by
the Free Software Foundation.
14. If you wish to incorporate parts of the Library into other free
programs whose distribution conditions are incompatible with these,
write to the author to ask for permission. For software which is
copyrighted by the Free Software Foundation, write to the Free
Software Foundation; we sometimes make exceptions for this. Our
decision will be guided by the two goals of preserving the free status
of all derivatives of our free software and of promoting the sharing
and reuse of software generally.
NO WARRANTY
15. BECAUSE THE LIBRARY IS LICENSED FREE OF CHARGE, THERE IS NO
WARRANTY FOR THE LIBRARY, TO THE EXTENT PERMITTED BY APPLICABLE LAW.
EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR
OTHER PARTIES PROVIDE THE LIBRARY "AS IS" WITHOUT WARRANTY OF ANY
KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE
LIBRARY IS WITH YOU. SHOULD THE LIBRARY PROVE DEFECTIVE, YOU ASSUME
THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION.
16. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN
WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY
AND/OR REDISTRIBUTE THE LIBRARY AS PERMITTED ABOVE, BE LIABLE TO YOU
FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR
CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE
LIBRARY (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING
RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A
FAILURE OF THE LIBRARY TO OPERATE WITH ANY OTHER SOFTWARE), EVEN IF
SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH
DAMAGES.
END OF TERMS AND CONDITIONS
How to Apply These Terms to Your New Libraries
If you develop a new library, and you want it to be of the greatest
possible use to the public, we recommend making it free software that
everyone can redistribute and change. You can do so by permitting
redistribution under these terms (or, alternatively, under the terms of the
ordinary General Public License).
To apply these terms, attach the following notices to the library. It is
safest to attach them to the start of each source file to most effectively
convey the exclusion of warranty; and each file should have at least the
"copyright" line and a pointer to where the full notice is found.
<one line to give the library's name and a brief idea of what it does.>
Copyright (C) <year> <name of author>
This library is free software; you can redistribute it and/or
modify it under the terms of the GNU Lesser General Public
License as published by the Free Software Foundation; either
version 2.1 of the License, or (at your option) any later version.
This library is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
Lesser General Public License for more details.
You should have received a copy of the GNU Lesser General Public
License along with this library; if not, write to the Free Software
Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
Also add information on how to contact you by electronic and paper mail.
You should also get your employer (if you work as a programmer) or your
school, if any, to sign a "copyright disclaimer" for the library, if
necessary. Here is a sample; alter the names:
Yoyodyne, Inc., hereby disclaims all copyright interest in the
library `Frob' (a library for tweaking knobs) written by James Random Hacker.
<signature of Ty Coon>, 1 April 1990
Ty Coon, President of Vice
That's all there is to it!

4
ChangeLog Normal file
View File

@ -0,0 +1,4 @@
2009-06-09 Willie Walker <william.walker@sun.com>
As of June 9, 2009, the ChangeLog is auto-generated when releasing.
If you are seeing this, use 'git log' for a detailed list of changes.

20252
ChangeLog-pre-2.27.1 Normal file

File diff suppressed because it is too large Load Diff

1
HACKING Normal file
View File

@ -0,0 +1 @@
Please contact the MAINTAINERS before making changes to Orca.

365
INSTALL Normal file
View File

@ -0,0 +1,365 @@
Installation Instructions
*************************
Basic Installation
==================
The following shell commands:
test -f configure || ./bootstrap
./configure
make
make install
should configure, build, and install this package. The first line,
which bootstraps, is intended for developers; when building from
distribution tarballs it does nothing and can be skipped.
The following more-detailed instructions are generic; see the
README file for instructions specific to this package. Some packages
provide this INSTALL file but do not implement all of the features
documented below. The lack of an optional feature in a given package is
not necessarily a bug. More recommendations for GNU packages can be
found in the GNU Coding Standards.
Many packages have scripts meant for developers instead of ordinary
builders, as they may use developer tools that are less commonly
installed, or they may access the network, which has privacy
implications. If the bootstrap shell script exists, it attempts to
build the configure shell script and related files, possibly using
developer tools or the network. Because the output of bootstrap is
system-independent, it is normally run by a package developer so that
its output can be put into the distribution tarball and ordinary
builders and users need not run bootstrap. Some packages have
commands like ./autopull.sh and ./autogen.sh that you can run
instead of ./bootstrap, for more fine-grained control over
bootstrapping.
The configure shell script attempts to guess correct values for
various system-dependent variables used during compilation. It uses
those values to create a Makefile in each directory of the package.
It may also create one or more .h files containing system-dependent
definitions. Finally, it creates a shell script config.status that
you can run in the future to recreate the current configuration, and a
file config.log containing output useful for debugging configure.
It can also use an optional file (typically called config.cache and
enabled with --cache-file=config.cache or simply -C) that saves the
results of its tests to speed up reconfiguring. Caching is disabled by
default to prevent problems with accidental use of stale cache files.
If you need to do unusual things to compile the package, please try
to figure out how configure could check whether to do them, and mail
diffs or instructions to the address given in the README so they can
be considered for the next release. If you are using the cache, and at
some point config.cache contains results you dont want to keep, you
may remove or edit it.
The autoconf program generates configure from the file
configure.ac. Normally you should edit configure.ac instead of
editing configure directly.
The simplest way to compile this package is:
1. cd to the directory containing the packages source code.
2. If this is a developer checkout and file configure does not yet
exist, type ./bootstrap to create it. You may need special
developer tools and network access to bootstrap, and the network
access may have privacy implications.
3. Type ./configure to configure the package for your system. This
might take a while. While running, configure prints messages
telling which features it is checking for.
4. Type make to compile the package.
5. Optionally, type make check to run any self-tests that come with
the package, generally using the just-built uninstalled binaries.
6. Type make install to install the programs and any data files and
documentation. When installing into a prefix owned by root, it is
recommended that the package be configured and built as a regular
user, and only the make install phase executed with root
privileges.
7. Optionally, type make installcheck to repeat any self-tests, but
this time using the binaries in their final installed location.
This target does not install anything. Running this target as a
regular user, particularly if the prior make install required
root privileges, verifies that the installation completed
correctly.
8. You can remove the program binaries and object files from the
source code directory by typing make clean. To also remove the
files that configure created (so you can compile the package for
a different kind of computer), type make distclean. There is
also a make maintainer-clean target, but that is intended mainly
for the packages developers. If you use it, you may have to
bootstrap again.
9. If the package follows the GNU Coding Standards, you can type make
uninstall to remove the installed files.
Compilers and Options
=====================
Some systems require unusual options for compilation or linking that
the configure script does not know about. Run ./configure --help
for details on some of the pertinent environment variables.
You can give configure initial values for configuration parameters
by setting variables in the command line or in the environment. Here is
an example:
./configure CC=gcc CFLAGS=-g LIBS=-lposix
See “Defining Variables” for more details.
Compiling For Multiple Architectures
====================================
You can compile the package for more than one kind of computer at the
same time, by placing the object files for each system in their own
directory. To do this, you can use GNU make. cd to the directory
where you want the object files and executables to go and run the
configure script. configure automatically checks for the source
code in the directory that configure is in and in ... This is known
as a “VPATH” build.
With a non-GNU make, it is safer to compile the package for one
system at a time in the source code directory. After you have installed
the package for one system, use make distclean before reconfiguring
for another system.
Some platforms, notably macOS, support “fat” or “universal” binaries,
where a single binary can execute on different architectures. On these
platforms you can configure and compile just once, with options specific
to that platform.
Installation Names
==================
By default, make install installs the packages commands under
/usr/local/bin, include files under /usr/local/include, etc. You
can specify an installation prefix other than /usr/local by giving
configure the option --prefix=PREFIX, where PREFIX must be an
absolute file name.
You can specify separate installation prefixes for
architecture-specific files and architecture-independent files. If you
pass the option --exec-prefix=PREFIX to configure, the package uses
PREFIX as the prefix for installing programs and libraries.
Documentation and other data files still use the regular prefix.
In addition, if you use an unusual directory layout you can give
options like --bindir=DIR to specify different values for particular
kinds of files. Run configure --help for a list of the directories
you can set and what kinds of files go in them. In general, the default
for these options is expressed in terms of ${prefix}, so that
specifying just --prefix will affect all of the other directory
specifications that were not explicitly provided.
The most portable way to affect installation locations is to pass the
correct locations to configure; however, many packages provide one or
both of the following shortcuts of passing variable assignments to the
make install command line to change installation locations without
having to reconfigure or recompile.
The first method involves providing an override variable for each
affected directory. For example, make install
prefix=/alternate/directory will choose an alternate location for all
directory configuration variables that were expressed in terms of
${prefix}. Any directories that were specified during configure,
but not in terms of ${prefix}, must each be overridden at install time
for the entire installation to be relocated. The approach of makefile
variable overrides for each directory variable is required by the GNU
Coding Standards, and ideally causes no recompilation. However, some
platforms have known limitations with the semantics of shared libraries
that end up requiring recompilation when using this method, particularly
noticeable in packages that use GNU Libtool.
The second method involves providing the DESTDIR variable. For
example, make install DESTDIR=/alternate/directory will prepend
/alternate/directory before all installation names. The approach of
DESTDIR overrides is not required by the GNU Coding Standards, and
does not work on platforms that have drive letters. On the other hand,
it does better at avoiding recompilation issues, and works well even
when some directory options were not specified in terms of ${prefix}
at configure time.
Optional Features
=================
If the package supports it, you can cause programs to be installed
with an extra prefix or suffix on their names by giving configure the
option --program-prefix=PREFIX or --program-suffix=SUFFIX.
Some packages pay attention to --enable-FEATURE and
--disable-FEATURE options to configure, where FEATURE indicates an
optional part of the package. They may also pay attention to
--with-PACKAGE and --without-PACKAGE options, where PACKAGE is
something like gnu-ld. ./configure --help should mention the
--enable-... and --with-... options that the package recognizes.
Some packages offer the ability to configure how verbose the
execution of make will be. For these packages, running ./configure
--enable-silent-rules sets the default to minimal output, which can be
overridden with make V=1; while running ./configure
--disable-silent-rules sets the default to verbose, which can be
overridden with make V=0.
Specifying a System Type
========================
By default configure builds for the current system. To create
binaries that can run on a different system type, specify a
--host=TYPE option along with compiler variables that specify how to
generate object code for TYPE. For example, to create binaries intended
to run on a 64-bit ARM processor:
./configure --host=aarch64-linux-gnu \
CC=aarch64-linux-gnu-gcc \
CXX=aarch64-linux-gnu-g++
If done on a machine that can execute these binaries (e.g., via
qemu-aarch64, $QEMU_LD_PREFIX, and Linuxs binfmt_misc
capability), the build behaves like a native build. Otherwise it is a
cross-build: configure will make cross-compilation guesses instead of
running test programs, and make check will not work.
A system type can either be a short name like mingw64, or a
canonical name like x86_64-pc-linux-gnu. Canonical names have the
form CPU-COMPANY-SYSTEM where SYSTEM is either OS or KERNEL-OS. To
canonicalize and validate a system type, you can run the command
config.sub, which is often squirreled away in a subdirectory like
build-aux. For example:
$ build-aux/config.sub arm64-linux
aarch64-unknown-linux-gnu
$ build-aux/config.sub riscv-lnx
Invalid configuration 'riscv-lnx': OS 'lnx' not recognized
You can look at the config.sub file to see which types are recognized.
If the file is absent, this package does not need the system type.
If configure fails with the diagnostic “cannot guess build type”.
config.sub did not recognize your systems type. In this case, first
fetch the newest versions of these files from the GNU config package
(https://savannah.gnu.org/projects/config). If that fixes things,
please report it to the maintainers of the package containing
configure. Otherwise, you can try the configure option --build=TYPE
where TYPE comes close to your system type; also, please report the
problem to <config-patches@gnu.org>.
For more details about configuring system types, see the Autoconf
documentation.
Sharing Defaults
================
If you want to set default values for configure scripts to share,
you can create a site shell script called config.site that gives
default values for variables like CC, cache_file, and prefix.
configure looks for PREFIX/share/config.site if it exists, then
PREFIX/etc/config.site if it exists. Or, you can set the
CONFIG_SITE environment variable to the location of the site script.
A warning: not all configure scripts look for a site script.
Defining Variables
==================
Variables not defined in a site shell script can be set in the
environment passed to configure. However, some packages may run
configure again during the build, and the customized values of these
variables may be lost. In order to avoid this problem, you should set
them in the configure command line, using VAR=value. For example:
./configure CC=/usr/local2/bin/gcc
causes the specified gcc to be used as the C compiler (unless it is
overridden in the site shell script).
Unfortunately, this technique does not work for CONFIG_SHELL due to an
Autoconf limitation. Until the limitation is lifted, you can use this
workaround:
CONFIG_SHELL=/bin/bash ./configure CONFIG_SHELL=/bin/bash
configure Invocation
======================
configure recognizes the following options to control how it
operates.
--help
-h
Print a summary of all of the options to configure, and exit.
--help=short
--help=recursive
Print a summary of the options unique to this packages
configure, and exit. The short variant lists options used only
in the top level, while the recursive variant lists options also
present in any nested packages.
--version
-V
Print the version of Autoconf used to generate the configure
script, and exit.
--cache-file=FILE
Enable the cache: use and save the results of the tests in FILE,
traditionally config.cache. FILE defaults to /dev/null to
disable caching.
--config-cache
-C
Alias for --cache-file=config.cache.
--srcdir=DIR
Look for the packages source code in directory DIR. Usually
configure can determine that directory automatically.
--prefix=DIR
Use DIR as the installation prefix. See “Installation Names” for
more details, including other options available for fine-tuning the
installation locations.
--host=TYPE
Build binaries for system TYPE. See “Specifying a System Type”.
--enable-FEATURE
--disable-FEATURE
Enable or disable the optional FEATURE. See “Optional Features”.
--with-PACKAGE
--without-PACKAGE
Use or omit PACKAGE when building. See “Optional Features”.
--quiet
--silent
-q
Do not print messages saying which checks are being made. To
suppress all normal output, redirect it to /dev/null (any error
messages will still be shown).
--no-create
-n
Run the configure checks, but stop before creating any output
files.
configure also recognizes several environment variables, and accepts
some other, less widely useful, options. Run configure --help for
more details.
Copyright notice
================
Copyright © 19941996, 19992002, 20042017, 20202024 Free Software
Foundation, Inc.
Copying and distribution of this file, with or without modification,
are permitted in any medium without royalty provided the copyright
notice and this notice are preserved. This file is offered as-is,
without warranty of any kind.

5
MAINTAINERS Normal file
View File

@ -0,0 +1,5 @@
Joanmarie Diggs
E-mail: jdiggs@igalia.com
Userid: joanied

947
Makefile Normal file
View File

@ -0,0 +1,947 @@
# Makefile.in generated by automake 1.17 from Makefile.am.
# Makefile. Generated from Makefile.in by configure.
# Copyright (C) 1994-2024 Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.
am__is_gnu_make = { \
if test -z '$(MAKELEVEL)'; then \
false; \
elif test -n '$(MAKE_HOST)'; then \
true; \
elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
true; \
else \
false; \
fi; \
}
am__make_running_with_option = \
case $${target_option-} in \
?) ;; \
*) echo "am__make_running_with_option: internal error: invalid" \
"target option '$${target_option-}' specified" >&2; \
exit 1;; \
esac; \
has_opt=no; \
sane_makeflags=$$MAKEFLAGS; \
if $(am__is_gnu_make); then \
sane_makeflags=$$MFLAGS; \
else \
case $$MAKEFLAGS in \
*\\[\ \ ]*) \
bs=\\; \
sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
| sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \
esac; \
fi; \
skip_next=no; \
strip_trailopt () \
{ \
flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
}; \
for flg in $$sane_makeflags; do \
test $$skip_next = yes && { skip_next=no; continue; }; \
case $$flg in \
*=*|--*) continue;; \
-*I) strip_trailopt 'I'; skip_next=yes;; \
-*I?*) strip_trailopt 'I';; \
-*O) strip_trailopt 'O'; skip_next=yes;; \
-*O?*) strip_trailopt 'O';; \
-*l) strip_trailopt 'l'; skip_next=yes;; \
-*l?*) strip_trailopt 'l';; \
-[dEDm]) skip_next=yes;; \
-[JT]) skip_next=yes;; \
esac; \
case $$flg in \
*$$target_option*) has_opt=yes; break;; \
esac; \
done; \
test $$has_opt = yes
am__make_dryrun = (target_option=n; $(am__make_running_with_option))
am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
am__rm_f = rm -f $(am__rm_f_notfound)
am__rm_rf = rm -rf $(am__rm_f_notfound)
pkgdatadir = $(datadir)/orca
pkgincludedir = $(includedir)/orca
pkglibdir = $(libdir)/orca
pkglibexecdir = $(libexecdir)/orca
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
INSTALL_HEADER = $(INSTALL_DATA)
transform = $(program_transform_name)
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
build_triplet = x86_64-pc-linux-gnu
host_triplet = x86_64-pc-linux-gnu
subdir = .
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/m4/build-to-host.m4 \
$(top_srcdir)/m4/gettext.m4 $(top_srcdir)/m4/host-cpu-c-abi.m4 \
$(top_srcdir)/m4/iconv.m4 $(top_srcdir)/m4/intlmacosx.m4 \
$(top_srcdir)/m4/lib-ld.m4 $(top_srcdir)/m4/lib-link.m4 \
$(top_srcdir)/m4/lib-prefix.m4 $(top_srcdir)/m4/nls.m4 \
$(top_srcdir)/m4/pkg.m4 $(top_srcdir)/m4/po.m4 \
$(top_srcdir)/m4/progtest.m4 $(top_srcdir)/m4/yelp.m4 \
$(top_srcdir)/acinclude.m4 $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
DIST_COMMON = $(srcdir)/Makefile.am $(top_srcdir)/configure \
$(am__configure_deps) $(am__DIST_COMMON)
am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
configure.lineno config.status.lineno
mkinstalldirs = $(install_sh) -d
CONFIG_CLEAN_FILES =
CONFIG_CLEAN_VPATH_FILES =
AM_V_P = $(am__v_P_$(V))
am__v_P_ = $(am__v_P_$(AM_DEFAULT_VERBOSITY))
am__v_P_0 = false
am__v_P_1 = :
AM_V_GEN = $(am__v_GEN_$(V))
am__v_GEN_ = $(am__v_GEN_$(AM_DEFAULT_VERBOSITY))
am__v_GEN_0 = @echo " GEN " $@;
am__v_GEN_1 =
AM_V_at = $(am__v_at_$(V))
am__v_at_ = $(am__v_at_$(AM_DEFAULT_VERBOSITY))
am__v_at_0 = @
am__v_at_1 =
SOURCES =
DIST_SOURCES =
RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \
ctags-recursive dvi-recursive html-recursive info-recursive \
install-data-recursive install-dvi-recursive \
install-exec-recursive install-html-recursive \
install-info-recursive install-pdf-recursive \
install-ps-recursive install-recursive installcheck-recursive \
installdirs-recursive pdf-recursive ps-recursive \
tags-recursive uninstall-recursive
am__can_run_installinfo = \
case $$AM_UPDATE_INFO_DIR in \
n|no|NO) false;; \
*) (install-info --version) >/dev/null 2>&1;; \
esac
am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
am__vpath_adj = case $$p in \
$(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
*) f=$$p;; \
esac;
am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
am__install_max = 40
am__nobase_strip_setup = \
srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
am__nobase_strip = \
for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
am__nobase_list = $(am__nobase_strip_setup); \
for p in $$list; do echo "$$p $$p"; done | \
sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
$(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
if (++n[$$2] == $(am__install_max)) \
{ print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
END { for (dir in files) print dir, files[dir] }'
am__base_list = \
sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
am__uninstall_files_from_dir = { \
{ test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
|| { echo " ( cd '$$dir' && rm -f" $$files ")"; \
$(am__cd) "$$dir" && echo $$files | $(am__xargs_n) 40 $(am__rm_f); }; \
}
am__installdirs = "$(DESTDIR)$(autostartdir)"
DATA = $(autostart_DATA)
RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \
distclean-recursive maintainer-clean-recursive
am__recursive_targets = \
$(RECURSIVE_TARGETS) \
$(RECURSIVE_CLEAN_TARGETS) \
$(am__extra_recursive_targets)
AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \
cscope distdir distdir-am dist dist-all distcheck
am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
# Read a list of newline-separated strings from the standard input,
# and print each of them once, without duplicates. Input order is
# *not* preserved.
am__uniquify_input = $(AWK) '\
BEGIN { nonempty = 0; } \
{ items[$$0] = 1; nonempty = 1; } \
END { if (nonempty) { for (i in items) print i; }; } \
'
# Make sure the list of sources is unique. This is necessary because,
# e.g., the same source file might be shared among _SOURCES variables
# for different programs/libraries.
am__define_uniq_tagged_files = \
list='$(am__tagged_files)'; \
unique=`for i in $$list; do \
if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
done | $(am__uniquify_input)`
DIST_SUBDIRS = $(SUBDIRS)
am__DIST_COMMON = $(srcdir)/Makefile.in ABOUT-NLS AUTHORS COPYING \
ChangeLog INSTALL NEWS README README.md TODO compile \
config.guess config.rpath config.sub install-sh missing \
py-compile
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
distdir = $(PACKAGE)-$(VERSION)
top_distdir = $(distdir)
am__remove_distdir = \
if test -d "$(distdir)"; then \
find "$(distdir)" -type d ! -perm -700 -exec chmod u+rwx {} ';' \
; rm -rf "$(distdir)" \
|| { sleep 5 && rm -rf "$(distdir)"; }; \
else :; fi
am__post_remove_distdir = $(am__remove_distdir)
am__relativize = \
dir0=`pwd`; \
sed_first='s,^\([^/]*\)/.*$$,\1,'; \
sed_rest='s,^[^/]*/*,,'; \
sed_last='s,^.*/\([^/]*\)$$,\1,'; \
sed_butlast='s,/*[^/]*$$,,'; \
while test -n "$$dir1"; do \
first=`echo "$$dir1" | sed -e "$$sed_first"`; \
if test "$$first" != "."; then \
if test "$$first" = ".."; then \
dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
else \
first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
if test "$$first2" = "$$first"; then \
dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
else \
dir2="../$$dir2"; \
fi; \
dir0="$$dir0"/"$$first"; \
fi; \
fi; \
dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
done; \
reldir="$$dir2"
GZIP_ENV = -9
DIST_ARCHIVES = $(distdir).tar.xz
DIST_TARGETS = dist-xz
# Exists only to be overridden by the user if desired.
AM_DISTCHECK_DVI_TARGET = dvi
distuninstallcheck_listfiles = find . -type f -print
am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \
| sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$'
distcleancheck_listfiles = \
find . \( -type f -a \! \
\( -name .nfs* -o -name .smb* -o -name .__afs* \) \) -print
ACLOCAL = ${SHELL} '/home/storm/orcatmp/orca/missing' aclocal-1.17
AMTAR = $${TAR-tar}
AM_DEFAULT_VERBOSITY = 1
ATKBRIDGE_CFLAGS = -I/usr/include/at-spi2-atk/2.0 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/at-spi-2.0 -I/usr/include/libmount -I/usr/include/blkid -I/usr/include/sysprof-6 -pthread -I/usr/include/atk-1.0 -I/usr/include/dbus-1.0 -I/usr/lib/dbus-1.0/include
ATKBRIDGE_LIBS = -latk-bridge-2.0
ATSPI2_CFLAGS = -I/usr/include/at-spi-2.0 -I/usr/include/dbus-1.0 -I/usr/lib/dbus-1.0/include -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/libmount -I/usr/include/blkid -I/usr/include/sysprof-6 -pthread
ATSPI2_LIBS = -latspi -ldbus-1 -lglib-2.0
AUTOCONF = ${SHELL} '/home/storm/orcatmp/orca/missing' autoconf
AUTOHEADER = ${SHELL} '/home/storm/orcatmp/orca/missing' autoheader
AUTOMAKE = ${SHELL} '/home/storm/orcatmp/orca/missing' automake-1.17
AWK = gawk
CC = gcc
CCDEPMODE = depmode=none
CFLAGS = -g -O2
CPP = gcc -E
CPPFLAGS =
CSCOPE = cscope
CTAGS = ctags
CYGPATH_W = echo
DEFS = -DPACKAGE_NAME=\"orca\" -DPACKAGE_TARNAME=\"orca\" -DPACKAGE_VERSION=\"45.3\" -DPACKAGE_STRING=\"orca\ 45.3\" -DPACKAGE_BUGREPORT=\"https://gitlab.gnome.org/GNOME/orca/-/issues/\" -DPACKAGE_URL=\"\" -DPACKAGE=\"orca\" -DVERSION=\"45.3\" -DENABLE_NLS=1 -DHAVE_GETTEXT=1 -DHAVE_DCGETTEXT=1 -DGETTEXT_PACKAGE=\"orca\"
DEPDIR = .deps
ECHO_C =
ECHO_N = -n
ECHO_T =
ETAGS = etags
EXEEXT =
GETTEXT_MACRO_VERSION = 0.20
GETTEXT_PACKAGE = orca
GMSGFMT = /usr/bin/msgfmt
GMSGFMT_015 = /usr/bin/msgfmt
GSTREAMER_CFLAGS = -I/usr/include/gstreamer-1.0 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/sysprof-6 -pthread
GSTREAMER_LIBS = -lgstreamer-1.0 -lgobject-2.0 -lglib-2.0
HELP_DIR = ${datadir}/help
INSTALL = /usr/bin/install -c
INSTALL_DATA = ${INSTALL} -m 644
INSTALL_PROGRAM = ${INSTALL}
INSTALL_SCRIPT = ${INSTALL}
INSTALL_STRIP_PROGRAM = $(install_sh) -c -s
INTLLIBS =
INTL_MACOSX_LIBS =
ITSTOOL = itstool
LDFLAGS =
LIBICONV = -liconv
LIBINTL =
LIBOBJS =
LIBS =
LN_S = ln -s
LOUIS_TABLE_DIR = /usr/share/liblouis/tables
LTLIBICONV = -liconv
LTLIBINTL =
LTLIBOBJS =
MAINT =
MAKEINFO = ${SHELL} '/home/storm/orcatmp/orca/missing' makeinfo
MKDIR_P = /usr/bin/mkdir -p
MSGFMT = /usr/bin/msgfmt
MSGMERGE = /usr/bin/msgmerge
MSGMERGE_FOR_MSGFMT_OPTION = --for-msgfmt
OBJEXT = o
PACKAGE = orca
PACKAGE_BUGREPORT = https://gitlab.gnome.org/GNOME/orca/-/issues/
PACKAGE_NAME = orca
PACKAGE_STRING = orca 45.3
PACKAGE_TARNAME = orca
PACKAGE_URL =
PACKAGE_VERSION = 45.3
PATH_SEPARATOR = :
PKG_CONFIG = /usr/bin/pkg-config
PKG_CONFIG_LIBDIR =
PKG_CONFIG_PATH =
PLATFORM_PATH = :/usr/bin:/usr/sbin:/bin
POSUB = po
PYGOBJECT_CFLAGS = -I/usr/include/pygobject-3.0 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/sysprof-6 -pthread
PYGOBJECT_LIBS = -lgobject-2.0 -lglib-2.0
PYTHON = /home/storm/.pyenv/shims/python
PYTHON_EXEC_PREFIX = ${exec_prefix}
PYTHON_PLATFORM = linux
PYTHON_PREFIX = ${prefix}
PYTHON_VERSION = 3.12
REVISION = fb25228b6
SED = /usr/bin/sed
SET_MAKE =
SHELL = /bin/sh
STRIP =
USE_NLS = yes
VERSION = 45.3
XGETTEXT = /usr/bin/xgettext
XGETTEXT_015 = /usr/bin/xgettext
XGETTEXT_EXTRA_OPTIONS =
XMLLINT = xmllint
YELP_LC_DIST = true
YELP_LC_MEDIA_LINKS = true
abs_builddir = /home/storm/orcatmp/orca
abs_srcdir = /home/storm/orcatmp/orca
abs_top_builddir = /home/storm/orcatmp/orca
abs_top_srcdir = /home/storm/orcatmp/orca
ac_ct_CC = gcc
am__include = include
am__leading_dot = .
am__quote =
am__rm_f_notfound =
am__tar = tar --format=ustar -chf - "$$tardir"
am__untar = tar -xf -
am__xargs_n = xargs -n
bindir = ${exec_prefix}/bin
build = x86_64-pc-linux-gnu
build_alias =
build_cpu = x86_64
build_os = linux-gnu
build_vendor = pc
builddir = .
datadir = ${datarootdir}
datarootdir = ${prefix}/share
docdir = ${datarootdir}/doc/${PACKAGE_TARNAME}
dvidir = ${docdir}
exec_prefix = ${prefix}
host = x86_64-pc-linux-gnu
host_alias =
host_cpu = x86_64
host_os = linux-gnu
host_vendor = pc
htmldir = ${docdir}
includedir = ${prefix}/include
infodir = ${datarootdir}/info
install_sh = ${SHELL} /home/storm/orcatmp/orca/install-sh
libdir = ${exec_prefix}/lib
libexecdir = ${exec_prefix}/libexec
localedir = ${datarootdir}/locale
localedir_c = "/usr/local/share/locale"
localedir_c_make = \"$(localedir)\"
localstatedir = /var
mandir = ${datarootdir}/man
mkdir_p = $(MKDIR_P)
oldincludedir = /usr/include
pdfdir = ${docdir}
pkgpyexecdir = ${pyexecdir}/orca
pkgpythondir = ${pythondir}/orca
prefix = /usr/local
program_transform_name = s,x,x,
psdir = ${docdir}
pyexecdir = ${PYTHON_EXEC_PREFIX}/lib/python3.12/site-packages
pythondir = ${PYTHON_PREFIX}/lib/python3.12/site-packages
runstatedir = ${localstatedir}/run
sbindir = ${exec_prefix}/sbin
sharedstatedir = ${prefix}/com
srcdir = .
sysconfdir = /etc
target_alias =
top_build_prefix =
top_builddir = .
top_srcdir = .
ACLOCAL_AMFLAGS = -I m4 ${ACLOCAL_FLAGS}
SUBDIRS = docs icons po src help
DISTCHECK_CONFIGURE_FLAGS = \
--disable-scrollkeeper
DISTCLEANFILES = \
orca-autostart.desktop
gtk_update_icon_cache = gtk-update-icon-cache -f -t $(datadir)/icons/hicolor
autostartdir = $(sysconfdir)/xdg/autostart
autostart_in_files = orca-autostart.desktop.in
autostart_DATA = $(autostart_in_files:.desktop.in=.desktop)
EXTRA_DIST = \
$(autostart_in_files) \
$(icon_DATA) \
ChangeLog \
MAINTAINERS \
README.md
all: all-recursive
.SUFFIXES:
am--refresh: Makefile
@:
$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)
@for dep in $?; do \
case '$(am__configure_deps)' in \
*$$dep*) \
echo ' cd $(srcdir) && $(AUTOMAKE) --gnu'; \
$(am__cd) $(srcdir) && $(AUTOMAKE) --gnu \
&& exit 0; \
exit 1;; \
esac; \
done; \
echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu Makefile'; \
$(am__cd) $(top_srcdir) && \
$(AUTOMAKE) --gnu Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
@case '$?' in \
*config.status*) \
echo ' $(SHELL) ./config.status'; \
$(SHELL) ./config.status;; \
*) \
echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__maybe_remake_depfiles)'; \
cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__maybe_remake_depfiles);; \
esac;
$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
$(SHELL) ./config.status --recheck
$(top_srcdir)/configure: $(am__configure_deps)
$(am__cd) $(srcdir) && $(AUTOCONF)
$(ACLOCAL_M4): $(am__aclocal_m4_deps)
$(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
$(am__aclocal_m4_deps):
install-autostartDATA: $(autostart_DATA)
@$(NORMAL_INSTALL)
@list='$(autostart_DATA)'; test -n "$(autostartdir)" || list=; \
if test -n "$$list"; then \
echo " $(MKDIR_P) '$(DESTDIR)$(autostartdir)'"; \
$(MKDIR_P) "$(DESTDIR)$(autostartdir)" || exit 1; \
fi; \
for p in $$list; do \
if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
echo "$$d$$p"; \
done | $(am__base_list) | \
while read files; do \
echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(autostartdir)'"; \
$(INSTALL_DATA) $$files "$(DESTDIR)$(autostartdir)" || exit $$?; \
done
uninstall-autostartDATA:
@$(NORMAL_UNINSTALL)
@list='$(autostart_DATA)'; test -n "$(autostartdir)" || list=; \
files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
dir='$(DESTDIR)$(autostartdir)'; $(am__uninstall_files_from_dir)
# This directory's subdirectories are mostly independent; you can cd
# into them and run 'make' without going through this Makefile.
# To change the values of 'make' variables: instead of editing Makefiles,
# (1) if the variable is set in 'config.status', edit 'config.status'
# (which will cause the Makefiles to be regenerated when you run 'make');
# (2) otherwise, pass the desired values on the 'make' command line.
$(am__recursive_targets):
@fail=; \
if $(am__make_keepgoing); then \
failcom='fail=yes'; \
else \
failcom='exit 1'; \
fi; \
dot_seen=no; \
target=`echo $@ | sed s/-recursive//`; \
case "$@" in \
distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
*) list='$(SUBDIRS)' ;; \
esac; \
for subdir in $$list; do \
echo "Making $$target in $$subdir"; \
if test "$$subdir" = "."; then \
dot_seen=yes; \
local_target="$$target-am"; \
else \
local_target="$$target"; \
fi; \
($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
|| eval $$failcom; \
done; \
if test "$$dot_seen" = "no"; then \
$(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
fi; test -z "$$fail"
ID: $(am__tagged_files)
$(am__define_uniq_tagged_files); mkid -fID $$unique
tags: tags-recursive
TAGS: tags
tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
set x; \
here=`pwd`; \
if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
include_option=--etags-include; \
empty_fix=.; \
else \
include_option=--include; \
empty_fix=; \
fi; \
list='$(SUBDIRS)'; for subdir in $$list; do \
if test "$$subdir" = .; then :; else \
test ! -f $$subdir/TAGS || \
set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
fi; \
done; \
$(am__define_uniq_tagged_files); \
shift; \
if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
test -n "$$unique" || unique=$$empty_fix; \
if test $$# -gt 0; then \
$(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
"$$@" $$unique; \
else \
$(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
$$unique; \
fi; \
fi
ctags: ctags-recursive
CTAGS: ctags
ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
$(am__define_uniq_tagged_files); \
test -z "$(CTAGS_ARGS)$$unique" \
|| $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
$$unique
GTAGS:
here=`$(am__cd) $(top_builddir) && pwd` \
&& $(am__cd) $(top_srcdir) \
&& gtags -i $(GTAGS_ARGS) "$$here"
cscope: cscope.files
test ! -s cscope.files \
|| $(CSCOPE) -b -q $(AM_CSCOPEFLAGS) $(CSCOPEFLAGS) -i cscope.files $(CSCOPE_ARGS)
clean-cscope:
-rm -f cscope.files
cscope.files: clean-cscope cscopelist
cscopelist: cscopelist-recursive
cscopelist-am: $(am__tagged_files)
list='$(am__tagged_files)'; \
case "$(srcdir)" in \
[\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
*) sdir=$(subdir)/$(srcdir) ;; \
esac; \
for i in $$list; do \
if test -f "$$i"; then \
echo "$(subdir)/$$i"; \
else \
echo "$$sdir/$$i"; \
fi; \
done >> $(top_builddir)/cscope.files
distclean-tags:
-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
-rm -f cscope.out cscope.in.out cscope.po.out cscope.files
distdir: $(BUILT_SOURCES)
$(MAKE) $(AM_MAKEFLAGS) distdir-am
distdir-am: $(DISTFILES)
$(am__remove_distdir)
$(AM_V_at)$(MKDIR_P) "$(distdir)"
@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
list='$(DISTFILES)'; \
dist_files=`for file in $$list; do echo $$file; done | \
sed -e "s|^$$srcdirstrip/||;t" \
-e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
case $$dist_files in \
*/*) $(MKDIR_P) `echo "$$dist_files" | \
sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
sort -u` ;; \
esac; \
for file in $$dist_files; do \
if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
if test -d $$d/$$file; then \
dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
if test -d "$(distdir)/$$file"; then \
find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
fi; \
if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
fi; \
cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
else \
test -f "$(distdir)/$$file" \
|| cp -p $$d/$$file "$(distdir)/$$file" \
|| exit 1; \
fi; \
done
@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
if test "$$subdir" = .; then :; else \
$(am__make_dryrun) \
|| test -d "$(distdir)/$$subdir" \
|| $(MKDIR_P) "$(distdir)/$$subdir" \
|| exit 1; \
dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
$(am__relativize); \
new_distdir=$$reldir; \
dir1=$$subdir; dir2="$(top_distdir)"; \
$(am__relativize); \
new_top_distdir=$$reldir; \
echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
($(am__cd) $$subdir && \
$(MAKE) $(AM_MAKEFLAGS) \
top_distdir="$$new_top_distdir" \
distdir="$$new_distdir" \
am__remove_distdir=: \
am__skip_length_check=: \
am__skip_mode_fix=: \
distdir) \
|| exit 1; \
fi; \
done
$(MAKE) $(AM_MAKEFLAGS) \
top_distdir="$(top_distdir)" distdir="$(distdir)" \
dist-hook
-test -n "$(am__skip_mode_fix)" \
|| find "$(distdir)" -type d ! -perm -755 \
-exec chmod u+rwx,go+rx {} \; -o \
! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
! -type d ! -perm -400 -exec chmod a+r {} \; -o \
! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
|| chmod -R a+r "$(distdir)"
dist-gzip: distdir
tardir=$(distdir) && $(am__tar) | eval GZIP= gzip $(GZIP_ENV) -c >$(distdir).tar.gz
$(am__post_remove_distdir)
dist-bzip2: distdir
tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2
$(am__post_remove_distdir)
dist-lzip: distdir
tardir=$(distdir) && $(am__tar) | lzip -c $${LZIP_OPT--9} >$(distdir).tar.lz
$(am__post_remove_distdir)
dist-xz: distdir
tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz
$(am__post_remove_distdir)
dist-zstd: distdir
tardir=$(distdir) && $(am__tar) | zstd -c $${ZSTD_CLEVEL-$${ZSTD_OPT--19}} >$(distdir).tar.zst
$(am__post_remove_distdir)
dist-tarZ: distdir
@echo WARNING: "Support for distribution archives compressed with" \
"legacy program 'compress' is deprecated." >&2
@echo WARNING: "It will be removed altogether in Automake 2.0" >&2
tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
$(am__post_remove_distdir)
dist-shar: distdir
@echo WARNING: "Support for shar distribution archives is" \
"deprecated." >&2
@echo WARNING: "It will be removed altogether in Automake 2.0" >&2
shar $(distdir) | eval GZIP= gzip $(GZIP_ENV) -c >$(distdir).shar.gz
$(am__post_remove_distdir)
dist-zip: distdir
-rm -f $(distdir).zip
zip -rq $(distdir).zip $(distdir)
$(am__post_remove_distdir)
dist dist-all:
$(MAKE) $(AM_MAKEFLAGS) $(DIST_TARGETS) am__post_remove_distdir='@:'
$(am__post_remove_distdir)
# This target untars the dist file and tries a VPATH configuration. Then
# it guarantees that the distribution is self-contained by making another
# tarfile.
distcheck: dist
case '$(DIST_ARCHIVES)' in \
*.tar.gz*) \
eval GZIP= gzip -dc $(distdir).tar.gz | $(am__untar) ;;\
*.tar.bz2*) \
bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\
*.tar.lz*) \
lzip -dc $(distdir).tar.lz | $(am__untar) ;;\
*.tar.xz*) \
xz -dc $(distdir).tar.xz | $(am__untar) ;;\
*.tar.Z*) \
uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
*.shar.gz*) \
eval GZIP= gzip -dc $(distdir).shar.gz | unshar ;;\
*.zip*) \
unzip $(distdir).zip ;;\
*.tar.zst*) \
zstd -dc $(distdir).tar.zst | $(am__untar) ;;\
esac
chmod -R a-w $(distdir)
chmod u+w $(distdir)
mkdir $(distdir)/_build $(distdir)/_build/sub $(distdir)/_inst
chmod a-w $(distdir)
test -d $(distdir)/_build || exit 0; \
dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
&& dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
&& am__cwd=`pwd` \
&& $(am__cd) $(distdir)/_build/sub \
&& ../../configure \
$(AM_DISTCHECK_CONFIGURE_FLAGS) \
$(DISTCHECK_CONFIGURE_FLAGS) \
--srcdir=../.. --prefix="$$dc_install_base" \
&& $(MAKE) $(AM_MAKEFLAGS) \
&& $(MAKE) $(AM_MAKEFLAGS) $(AM_DISTCHECK_DVI_TARGET) \
&& $(MAKE) $(AM_MAKEFLAGS) check \
&& $(MAKE) $(AM_MAKEFLAGS) install \
&& $(MAKE) $(AM_MAKEFLAGS) installcheck \
&& $(MAKE) $(AM_MAKEFLAGS) uninstall \
&& $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
distuninstallcheck \
&& chmod -R a-w "$$dc_install_base" \
&& ({ \
(cd ../.. && umask 077 && mkdir "$$dc_destdir") \
&& $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
&& $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
&& $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
} || { rm -rf "$$dc_destdir"; exit 1; }) \
&& rm -rf "$$dc_destdir" \
&& $(MAKE) $(AM_MAKEFLAGS) dist \
&& rm -rf $(DIST_ARCHIVES) \
&& $(MAKE) $(AM_MAKEFLAGS) distcleancheck \
&& cd "$$am__cwd" \
|| exit 1
$(am__post_remove_distdir)
@(echo "$(distdir) archives ready for distribution: "; \
list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
distuninstallcheck:
@test -n '$(distuninstallcheck_dir)' || { \
echo 'ERROR: trying to run $@ with an empty' \
'$$(distuninstallcheck_dir)' >&2; \
exit 1; \
}; \
$(am__cd) '$(distuninstallcheck_dir)' || { \
echo 'ERROR: cannot chdir into $(distuninstallcheck_dir)' >&2; \
exit 1; \
}; \
test `$(am__distuninstallcheck_listfiles) | wc -l` -eq 0 \
|| { echo "ERROR: files left after uninstall:" ; \
if test -n "$(DESTDIR)"; then \
echo " (check DESTDIR support)"; \
fi ; \
$(distuninstallcheck_listfiles) ; \
exit 1; } >&2
distcleancheck: distclean
@if test '$(srcdir)' = . ; then \
echo "ERROR: distcleancheck can only run from a VPATH build" ; \
exit 1 ; \
fi
@test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
|| { echo "ERROR: files left in build directory after distclean:" ; \
$(distcleancheck_listfiles) ; \
exit 1; } >&2
check-am: all-am
check: check-recursive
all-am: Makefile $(DATA)
installdirs: installdirs-recursive
installdirs-am:
for dir in "$(DESTDIR)$(autostartdir)"; do \
test -z "$$dir" || $(MKDIR_P) "$$dir"; \
done
install: install-recursive
install-exec: install-exec-recursive
install-data: install-data-recursive
uninstall: uninstall-recursive
install-am: all-am
@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
installcheck: installcheck-recursive
install-strip:
if test -z '$(STRIP)'; then \
$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
install; \
else \
$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
"INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
fi
mostlyclean-generic:
clean-generic:
distclean-generic:
-$(am__rm_f) $(CONFIG_CLEAN_FILES)
-test . = "$(srcdir)" || $(am__rm_f) $(CONFIG_CLEAN_VPATH_FILES)
-$(am__rm_f) $(DISTCLEANFILES)
maintainer-clean-generic:
@echo "This command is intended for maintainers to use"
@echo "it deletes files that may require special tools to rebuild."
clean: clean-recursive
clean-am: clean-generic mostlyclean-am
distclean: distclean-recursive
-rm -f $(am__CONFIG_DISTCLEAN_FILES)
-rm -f Makefile
distclean-am: clean-am distclean-generic distclean-tags
dvi: dvi-recursive
dvi-am:
html: html-recursive
html-am:
info: info-recursive
info-am:
install-data-am: install-autostartDATA
@$(NORMAL_INSTALL)
$(MAKE) $(AM_MAKEFLAGS) install-data-hook
install-dvi: install-dvi-recursive
install-dvi-am:
install-exec-am:
install-html: install-html-recursive
install-html-am:
install-info: install-info-recursive
install-info-am:
install-man:
install-pdf: install-pdf-recursive
install-pdf-am:
install-ps: install-ps-recursive
install-ps-am:
installcheck-am:
maintainer-clean: maintainer-clean-recursive
-rm -f $(am__CONFIG_DISTCLEAN_FILES)
-rm -rf $(top_srcdir)/autom4te.cache
-rm -f Makefile
maintainer-clean-am: distclean-am maintainer-clean-generic
mostlyclean: mostlyclean-recursive
mostlyclean-am: mostlyclean-generic
pdf: pdf-recursive
pdf-am:
ps: ps-recursive
ps-am:
uninstall-am: uninstall-autostartDATA
@$(NORMAL_INSTALL)
$(MAKE) $(AM_MAKEFLAGS) uninstall-hook
.MAKE: $(am__recursive_targets) install-am install-data-am \
install-strip uninstall-am
.PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am \
am--refresh check check-am clean clean-cscope clean-generic \
cscope cscopelist-am ctags ctags-am dist dist-all dist-bzip2 \
dist-gzip dist-hook dist-lzip dist-shar dist-tarZ dist-xz \
dist-zip dist-zstd distcheck distclean distclean-generic \
distclean-tags distcleancheck distdir distuninstallcheck dvi \
dvi-am html html-am info info-am install install-am \
install-autostartDATA install-data install-data-am \
install-data-hook install-dvi install-dvi-am install-exec \
install-exec-am install-html install-html-am install-info \
install-info-am install-man install-pdf install-pdf-am \
install-ps install-ps-am install-strip installcheck \
installcheck-am installdirs installdirs-am maintainer-clean \
maintainer-clean-generic mostlyclean mostlyclean-generic pdf \
pdf-am ps ps-am tags tags-am uninstall uninstall-am \
uninstall-autostartDATA uninstall-hook
.PRECIOUS: Makefile
README: README.md
cp $< $@
install-data-hook: update-icon-cache
uninstall-hook: update-icon-cache
update-icon-cache:
@-if test -z "$(DESTDIR)"; then \
echo "Updating Gtk icon cache."; \
$(gtk_update_icon_cache); \
else \
echo "*** Icon cache not updated. After (un)install, run this:"; \
echo "*** $(gtk_update_icon_cache)"; \
fi
$(autostart_DATA): $(autostart_in_files)
$(AM_V_GEN)$(MSGFMT) --desktop --template $< -d $(top_srcdir)/po -o $@
dist-hook:
@if test -d "$(srcdir)/.git"; \
then \
echo Creating ChangeLog && \
( cd "$(top_srcdir)" && \
echo '# Generated by Makefile. Do not edit.'; echo; \
$(top_srcdir)/missing --run git log --pretty=format:"%ai %an <%ae>%n%n %s%n" --name-status ORCA_2_26_0.. ) > ChangeLog.tmp \
&& mv -f ChangeLog.tmp $(top_distdir)/ChangeLog \
|| ( rm -f ChangeLog.tmp ; \
echo Failed to generate ChangeLog >&2 ); \
else \
echo A git clone is required to generate a ChangeLog >&2; \
fi
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT:
# Tell GNU make to disable its built-in pattern rules.
%:: %,v
%:: RCS/%,v
%:: RCS/%
%:: s.%
%:: SCCS/s.%

53
Makefile.am Normal file
View File

@ -0,0 +1,53 @@
ACLOCAL_AMFLAGS = -I m4 ${ACLOCAL_FLAGS}
SUBDIRS = docs icons po src help
DISTCHECK_CONFIGURE_FLAGS = \
--disable-scrollkeeper
DISTCLEANFILES = \
orca-autostart.desktop
README: README.md
cp $< $@
gtk_update_icon_cache = gtk-update-icon-cache -f -t $(datadir)/icons/hicolor
install-data-hook: update-icon-cache
uninstall-hook: update-icon-cache
update-icon-cache:
@-if test -z "$(DESTDIR)"; then \
echo "Updating Gtk icon cache."; \
$(gtk_update_icon_cache); \
else \
echo "*** Icon cache not updated. After (un)install, run this:"; \
echo "*** $(gtk_update_icon_cache)"; \
fi
autostartdir = $(sysconfdir)/xdg/autostart
autostart_in_files = orca-autostart.desktop.in
autostart_DATA = $(autostart_in_files:.desktop.in=.desktop)
$(autostart_DATA): $(autostart_in_files)
$(AM_V_GEN)$(MSGFMT) --desktop --template $< -d $(top_srcdir)/po -o $@
EXTRA_DIST = \
$(autostart_in_files) \
$(icon_DATA) \
ChangeLog \
MAINTAINERS \
README.md
dist-hook:
@if test -d "$(srcdir)/.git"; \
then \
echo Creating ChangeLog && \
( cd "$(top_srcdir)" && \
echo '# Generated by Makefile. Do not edit.'; echo; \
$(top_srcdir)/missing --run git log --pretty=format:"%ai %an <%ae>%n%n %s%n" --name-status ORCA_2_26_0.. ) > ChangeLog.tmp \
&& mv -f ChangeLog.tmp $(top_distdir)/ChangeLog \
|| ( rm -f ChangeLog.tmp ; \
echo Failed to generate ChangeLog >&2 ); \
else \
echo A git clone is required to generate a ChangeLog >&2; \
fi

947
Makefile.in Normal file
View File

@ -0,0 +1,947 @@
# Makefile.in generated by automake 1.17 from Makefile.am.
# @configure_input@
# Copyright (C) 1994-2024 Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.
@SET_MAKE@
VPATH = @srcdir@
am__is_gnu_make = { \
if test -z '$(MAKELEVEL)'; then \
false; \
elif test -n '$(MAKE_HOST)'; then \
true; \
elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
true; \
else \
false; \
fi; \
}
am__make_running_with_option = \
case $${target_option-} in \
?) ;; \
*) echo "am__make_running_with_option: internal error: invalid" \
"target option '$${target_option-}' specified" >&2; \
exit 1;; \
esac; \
has_opt=no; \
sane_makeflags=$$MAKEFLAGS; \
if $(am__is_gnu_make); then \
sane_makeflags=$$MFLAGS; \
else \
case $$MAKEFLAGS in \
*\\[\ \ ]*) \
bs=\\; \
sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
| sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \
esac; \
fi; \
skip_next=no; \
strip_trailopt () \
{ \
flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
}; \
for flg in $$sane_makeflags; do \
test $$skip_next = yes && { skip_next=no; continue; }; \
case $$flg in \
*=*|--*) continue;; \
-*I) strip_trailopt 'I'; skip_next=yes;; \
-*I?*) strip_trailopt 'I';; \
-*O) strip_trailopt 'O'; skip_next=yes;; \
-*O?*) strip_trailopt 'O';; \
-*l) strip_trailopt 'l'; skip_next=yes;; \
-*l?*) strip_trailopt 'l';; \
-[dEDm]) skip_next=yes;; \
-[JT]) skip_next=yes;; \
esac; \
case $$flg in \
*$$target_option*) has_opt=yes; break;; \
esac; \
done; \
test $$has_opt = yes
am__make_dryrun = (target_option=n; $(am__make_running_with_option))
am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
am__rm_f = rm -f $(am__rm_f_notfound)
am__rm_rf = rm -rf $(am__rm_f_notfound)
pkgdatadir = $(datadir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
pkglibexecdir = $(libexecdir)/@PACKAGE@
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
INSTALL_HEADER = $(INSTALL_DATA)
transform = $(program_transform_name)
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
build_triplet = @build@
host_triplet = @host@
subdir = .
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/m4/build-to-host.m4 \
$(top_srcdir)/m4/gettext.m4 $(top_srcdir)/m4/host-cpu-c-abi.m4 \
$(top_srcdir)/m4/iconv.m4 $(top_srcdir)/m4/intlmacosx.m4 \
$(top_srcdir)/m4/lib-ld.m4 $(top_srcdir)/m4/lib-link.m4 \
$(top_srcdir)/m4/lib-prefix.m4 $(top_srcdir)/m4/nls.m4 \
$(top_srcdir)/m4/pkg.m4 $(top_srcdir)/m4/po.m4 \
$(top_srcdir)/m4/progtest.m4 $(top_srcdir)/m4/yelp.m4 \
$(top_srcdir)/acinclude.m4 $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
DIST_COMMON = $(srcdir)/Makefile.am $(top_srcdir)/configure \
$(am__configure_deps) $(am__DIST_COMMON)
am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
configure.lineno config.status.lineno
mkinstalldirs = $(install_sh) -d
CONFIG_CLEAN_FILES =
CONFIG_CLEAN_VPATH_FILES =
AM_V_P = $(am__v_P_@AM_V@)
am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
am__v_P_0 = false
am__v_P_1 = :
AM_V_GEN = $(am__v_GEN_@AM_V@)
am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
am__v_GEN_0 = @echo " GEN " $@;
am__v_GEN_1 =
AM_V_at = $(am__v_at_@AM_V@)
am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
am__v_at_0 = @
am__v_at_1 =
SOURCES =
DIST_SOURCES =
RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \
ctags-recursive dvi-recursive html-recursive info-recursive \
install-data-recursive install-dvi-recursive \
install-exec-recursive install-html-recursive \
install-info-recursive install-pdf-recursive \
install-ps-recursive install-recursive installcheck-recursive \
installdirs-recursive pdf-recursive ps-recursive \
tags-recursive uninstall-recursive
am__can_run_installinfo = \
case $$AM_UPDATE_INFO_DIR in \
n|no|NO) false;; \
*) (install-info --version) >/dev/null 2>&1;; \
esac
am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
am__vpath_adj = case $$p in \
$(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
*) f=$$p;; \
esac;
am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
am__install_max = 40
am__nobase_strip_setup = \
srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
am__nobase_strip = \
for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
am__nobase_list = $(am__nobase_strip_setup); \
for p in $$list; do echo "$$p $$p"; done | \
sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
$(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
if (++n[$$2] == $(am__install_max)) \
{ print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
END { for (dir in files) print dir, files[dir] }'
am__base_list = \
sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
am__uninstall_files_from_dir = { \
{ test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
|| { echo " ( cd '$$dir' && rm -f" $$files ")"; \
$(am__cd) "$$dir" && echo $$files | $(am__xargs_n) 40 $(am__rm_f); }; \
}
am__installdirs = "$(DESTDIR)$(autostartdir)"
DATA = $(autostart_DATA)
RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \
distclean-recursive maintainer-clean-recursive
am__recursive_targets = \
$(RECURSIVE_TARGETS) \
$(RECURSIVE_CLEAN_TARGETS) \
$(am__extra_recursive_targets)
AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \
cscope distdir distdir-am dist dist-all distcheck
am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
# Read a list of newline-separated strings from the standard input,
# and print each of them once, without duplicates. Input order is
# *not* preserved.
am__uniquify_input = $(AWK) '\
BEGIN { nonempty = 0; } \
{ items[$$0] = 1; nonempty = 1; } \
END { if (nonempty) { for (i in items) print i; }; } \
'
# Make sure the list of sources is unique. This is necessary because,
# e.g., the same source file might be shared among _SOURCES variables
# for different programs/libraries.
am__define_uniq_tagged_files = \
list='$(am__tagged_files)'; \
unique=`for i in $$list; do \
if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
done | $(am__uniquify_input)`
DIST_SUBDIRS = $(SUBDIRS)
am__DIST_COMMON = $(srcdir)/Makefile.in ABOUT-NLS AUTHORS COPYING \
ChangeLog INSTALL NEWS README README.md TODO compile \
config.guess config.rpath config.sub install-sh missing \
py-compile
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
distdir = $(PACKAGE)-$(VERSION)
top_distdir = $(distdir)
am__remove_distdir = \
if test -d "$(distdir)"; then \
find "$(distdir)" -type d ! -perm -700 -exec chmod u+rwx {} ';' \
; rm -rf "$(distdir)" \
|| { sleep 5 && rm -rf "$(distdir)"; }; \
else :; fi
am__post_remove_distdir = $(am__remove_distdir)
am__relativize = \
dir0=`pwd`; \
sed_first='s,^\([^/]*\)/.*$$,\1,'; \
sed_rest='s,^[^/]*/*,,'; \
sed_last='s,^.*/\([^/]*\)$$,\1,'; \
sed_butlast='s,/*[^/]*$$,,'; \
while test -n "$$dir1"; do \
first=`echo "$$dir1" | sed -e "$$sed_first"`; \
if test "$$first" != "."; then \
if test "$$first" = ".."; then \
dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
else \
first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
if test "$$first2" = "$$first"; then \
dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
else \
dir2="../$$dir2"; \
fi; \
dir0="$$dir0"/"$$first"; \
fi; \
fi; \
dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
done; \
reldir="$$dir2"
GZIP_ENV = -9
DIST_ARCHIVES = $(distdir).tar.xz
DIST_TARGETS = dist-xz
# Exists only to be overridden by the user if desired.
AM_DISTCHECK_DVI_TARGET = dvi
distuninstallcheck_listfiles = find . -type f -print
am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \
| sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$'
distcleancheck_listfiles = \
find . \( -type f -a \! \
\( -name .nfs* -o -name .smb* -o -name .__afs* \) \) -print
ACLOCAL = @ACLOCAL@
AMTAR = @AMTAR@
AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
ATKBRIDGE_CFLAGS = @ATKBRIDGE_CFLAGS@
ATKBRIDGE_LIBS = @ATKBRIDGE_LIBS@
ATSPI2_CFLAGS = @ATSPI2_CFLAGS@
ATSPI2_LIBS = @ATSPI2_LIBS@
AUTOCONF = @AUTOCONF@
AUTOHEADER = @AUTOHEADER@
AUTOMAKE = @AUTOMAKE@
AWK = @AWK@
CC = @CC@
CCDEPMODE = @CCDEPMODE@
CFLAGS = @CFLAGS@
CPP = @CPP@
CPPFLAGS = @CPPFLAGS@
CSCOPE = @CSCOPE@
CTAGS = @CTAGS@
CYGPATH_W = @CYGPATH_W@
DEFS = @DEFS@
DEPDIR = @DEPDIR@
ECHO_C = @ECHO_C@
ECHO_N = @ECHO_N@
ECHO_T = @ECHO_T@
ETAGS = @ETAGS@
EXEEXT = @EXEEXT@
GETTEXT_MACRO_VERSION = @GETTEXT_MACRO_VERSION@
GETTEXT_PACKAGE = @GETTEXT_PACKAGE@
GMSGFMT = @GMSGFMT@
GMSGFMT_015 = @GMSGFMT_015@
GSTREAMER_CFLAGS = @GSTREAMER_CFLAGS@
GSTREAMER_LIBS = @GSTREAMER_LIBS@
HELP_DIR = @HELP_DIR@
INSTALL = @INSTALL@
INSTALL_DATA = @INSTALL_DATA@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_SCRIPT = @INSTALL_SCRIPT@
INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
INTLLIBS = @INTLLIBS@
INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@
ITSTOOL = @ITSTOOL@
LDFLAGS = @LDFLAGS@
LIBICONV = @LIBICONV@
LIBINTL = @LIBINTL@
LIBOBJS = @LIBOBJS@
LIBS = @LIBS@
LN_S = @LN_S@
LOUIS_TABLE_DIR = @LOUIS_TABLE_DIR@
LTLIBICONV = @LTLIBICONV@
LTLIBINTL = @LTLIBINTL@
LTLIBOBJS = @LTLIBOBJS@
MAINT = @MAINT@
MAKEINFO = @MAKEINFO@
MKDIR_P = @MKDIR_P@
MSGFMT = @MSGFMT@
MSGMERGE = @MSGMERGE@
MSGMERGE_FOR_MSGFMT_OPTION = @MSGMERGE_FOR_MSGFMT_OPTION@
OBJEXT = @OBJEXT@
PACKAGE = @PACKAGE@
PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
PACKAGE_NAME = @PACKAGE_NAME@
PACKAGE_STRING = @PACKAGE_STRING@
PACKAGE_TARNAME = @PACKAGE_TARNAME@
PACKAGE_URL = @PACKAGE_URL@
PACKAGE_VERSION = @PACKAGE_VERSION@
PATH_SEPARATOR = @PATH_SEPARATOR@
PKG_CONFIG = @PKG_CONFIG@
PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@
PKG_CONFIG_PATH = @PKG_CONFIG_PATH@
PLATFORM_PATH = @PLATFORM_PATH@
POSUB = @POSUB@
PYGOBJECT_CFLAGS = @PYGOBJECT_CFLAGS@
PYGOBJECT_LIBS = @PYGOBJECT_LIBS@
PYTHON = @PYTHON@
PYTHON_EXEC_PREFIX = @PYTHON_EXEC_PREFIX@
PYTHON_PLATFORM = @PYTHON_PLATFORM@
PYTHON_PREFIX = @PYTHON_PREFIX@
PYTHON_VERSION = @PYTHON_VERSION@
REVISION = @REVISION@
SED = @SED@
SET_MAKE = @SET_MAKE@
SHELL = @SHELL@
STRIP = @STRIP@
USE_NLS = @USE_NLS@
VERSION = @VERSION@
XGETTEXT = @XGETTEXT@
XGETTEXT_015 = @XGETTEXT_015@
XGETTEXT_EXTRA_OPTIONS = @XGETTEXT_EXTRA_OPTIONS@
XMLLINT = @XMLLINT@
YELP_LC_DIST = @YELP_LC_DIST@
YELP_LC_MEDIA_LINKS = @YELP_LC_MEDIA_LINKS@
abs_builddir = @abs_builddir@
abs_srcdir = @abs_srcdir@
abs_top_builddir = @abs_top_builddir@
abs_top_srcdir = @abs_top_srcdir@
ac_ct_CC = @ac_ct_CC@
am__include = @am__include@
am__leading_dot = @am__leading_dot@
am__quote = @am__quote@
am__rm_f_notfound = @am__rm_f_notfound@
am__tar = @am__tar@
am__untar = @am__untar@
am__xargs_n = @am__xargs_n@
bindir = @bindir@
build = @build@
build_alias = @build_alias@
build_cpu = @build_cpu@
build_os = @build_os@
build_vendor = @build_vendor@
builddir = @builddir@
datadir = @datadir@
datarootdir = @datarootdir@
docdir = @docdir@
dvidir = @dvidir@
exec_prefix = @exec_prefix@
host = @host@
host_alias = @host_alias@
host_cpu = @host_cpu@
host_os = @host_os@
host_vendor = @host_vendor@
htmldir = @htmldir@
includedir = @includedir@
infodir = @infodir@
install_sh = @install_sh@
libdir = @libdir@
libexecdir = @libexecdir@
localedir = @localedir@
localedir_c = @localedir_c@
localedir_c_make = @localedir_c_make@
localstatedir = @localstatedir@
mandir = @mandir@
mkdir_p = @mkdir_p@
oldincludedir = @oldincludedir@
pdfdir = @pdfdir@
pkgpyexecdir = @pkgpyexecdir@
pkgpythondir = @pkgpythondir@
prefix = @prefix@
program_transform_name = @program_transform_name@
psdir = @psdir@
pyexecdir = @pyexecdir@
pythondir = @pythondir@
runstatedir = @runstatedir@
sbindir = @sbindir@
sharedstatedir = @sharedstatedir@
srcdir = @srcdir@
sysconfdir = @sysconfdir@
target_alias = @target_alias@
top_build_prefix = @top_build_prefix@
top_builddir = @top_builddir@
top_srcdir = @top_srcdir@
ACLOCAL_AMFLAGS = -I m4 ${ACLOCAL_FLAGS}
SUBDIRS = docs icons po src help
DISTCHECK_CONFIGURE_FLAGS = \
--disable-scrollkeeper
DISTCLEANFILES = \
orca-autostart.desktop
gtk_update_icon_cache = gtk-update-icon-cache -f -t $(datadir)/icons/hicolor
autostartdir = $(sysconfdir)/xdg/autostart
autostart_in_files = orca-autostart.desktop.in
autostart_DATA = $(autostart_in_files:.desktop.in=.desktop)
EXTRA_DIST = \
$(autostart_in_files) \
$(icon_DATA) \
ChangeLog \
MAINTAINERS \
README.md
all: all-recursive
.SUFFIXES:
am--refresh: Makefile
@:
$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps)
@for dep in $?; do \
case '$(am__configure_deps)' in \
*$$dep*) \
echo ' cd $(srcdir) && $(AUTOMAKE) --gnu'; \
$(am__cd) $(srcdir) && $(AUTOMAKE) --gnu \
&& exit 0; \
exit 1;; \
esac; \
done; \
echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu Makefile'; \
$(am__cd) $(top_srcdir) && \
$(AUTOMAKE) --gnu Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
@case '$?' in \
*config.status*) \
echo ' $(SHELL) ./config.status'; \
$(SHELL) ./config.status;; \
*) \
echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__maybe_remake_depfiles)'; \
cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__maybe_remake_depfiles);; \
esac;
$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
$(SHELL) ./config.status --recheck
$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
$(am__cd) $(srcdir) && $(AUTOCONF)
$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
$(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
$(am__aclocal_m4_deps):
install-autostartDATA: $(autostart_DATA)
@$(NORMAL_INSTALL)
@list='$(autostart_DATA)'; test -n "$(autostartdir)" || list=; \
if test -n "$$list"; then \
echo " $(MKDIR_P) '$(DESTDIR)$(autostartdir)'"; \
$(MKDIR_P) "$(DESTDIR)$(autostartdir)" || exit 1; \
fi; \
for p in $$list; do \
if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
echo "$$d$$p"; \
done | $(am__base_list) | \
while read files; do \
echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(autostartdir)'"; \
$(INSTALL_DATA) $$files "$(DESTDIR)$(autostartdir)" || exit $$?; \
done
uninstall-autostartDATA:
@$(NORMAL_UNINSTALL)
@list='$(autostart_DATA)'; test -n "$(autostartdir)" || list=; \
files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
dir='$(DESTDIR)$(autostartdir)'; $(am__uninstall_files_from_dir)
# This directory's subdirectories are mostly independent; you can cd
# into them and run 'make' without going through this Makefile.
# To change the values of 'make' variables: instead of editing Makefiles,
# (1) if the variable is set in 'config.status', edit 'config.status'
# (which will cause the Makefiles to be regenerated when you run 'make');
# (2) otherwise, pass the desired values on the 'make' command line.
$(am__recursive_targets):
@fail=; \
if $(am__make_keepgoing); then \
failcom='fail=yes'; \
else \
failcom='exit 1'; \
fi; \
dot_seen=no; \
target=`echo $@ | sed s/-recursive//`; \
case "$@" in \
distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
*) list='$(SUBDIRS)' ;; \
esac; \
for subdir in $$list; do \
echo "Making $$target in $$subdir"; \
if test "$$subdir" = "."; then \
dot_seen=yes; \
local_target="$$target-am"; \
else \
local_target="$$target"; \
fi; \
($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
|| eval $$failcom; \
done; \
if test "$$dot_seen" = "no"; then \
$(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
fi; test -z "$$fail"
ID: $(am__tagged_files)
$(am__define_uniq_tagged_files); mkid -fID $$unique
tags: tags-recursive
TAGS: tags
tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
set x; \
here=`pwd`; \
if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
include_option=--etags-include; \
empty_fix=.; \
else \
include_option=--include; \
empty_fix=; \
fi; \
list='$(SUBDIRS)'; for subdir in $$list; do \
if test "$$subdir" = .; then :; else \
test ! -f $$subdir/TAGS || \
set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
fi; \
done; \
$(am__define_uniq_tagged_files); \
shift; \
if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
test -n "$$unique" || unique=$$empty_fix; \
if test $$# -gt 0; then \
$(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
"$$@" $$unique; \
else \
$(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
$$unique; \
fi; \
fi
ctags: ctags-recursive
CTAGS: ctags
ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
$(am__define_uniq_tagged_files); \
test -z "$(CTAGS_ARGS)$$unique" \
|| $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
$$unique
GTAGS:
here=`$(am__cd) $(top_builddir) && pwd` \
&& $(am__cd) $(top_srcdir) \
&& gtags -i $(GTAGS_ARGS) "$$here"
cscope: cscope.files
test ! -s cscope.files \
|| $(CSCOPE) -b -q $(AM_CSCOPEFLAGS) $(CSCOPEFLAGS) -i cscope.files $(CSCOPE_ARGS)
clean-cscope:
-rm -f cscope.files
cscope.files: clean-cscope cscopelist
cscopelist: cscopelist-recursive
cscopelist-am: $(am__tagged_files)
list='$(am__tagged_files)'; \
case "$(srcdir)" in \
[\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
*) sdir=$(subdir)/$(srcdir) ;; \
esac; \
for i in $$list; do \
if test -f "$$i"; then \
echo "$(subdir)/$$i"; \
else \
echo "$$sdir/$$i"; \
fi; \
done >> $(top_builddir)/cscope.files
distclean-tags:
-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
-rm -f cscope.out cscope.in.out cscope.po.out cscope.files
distdir: $(BUILT_SOURCES)
$(MAKE) $(AM_MAKEFLAGS) distdir-am
distdir-am: $(DISTFILES)
$(am__remove_distdir)
$(AM_V_at)$(MKDIR_P) "$(distdir)"
@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
list='$(DISTFILES)'; \
dist_files=`for file in $$list; do echo $$file; done | \
sed -e "s|^$$srcdirstrip/||;t" \
-e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
case $$dist_files in \
*/*) $(MKDIR_P) `echo "$$dist_files" | \
sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
sort -u` ;; \
esac; \
for file in $$dist_files; do \
if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
if test -d $$d/$$file; then \
dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
if test -d "$(distdir)/$$file"; then \
find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
fi; \
if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
fi; \
cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
else \
test -f "$(distdir)/$$file" \
|| cp -p $$d/$$file "$(distdir)/$$file" \
|| exit 1; \
fi; \
done
@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
if test "$$subdir" = .; then :; else \
$(am__make_dryrun) \
|| test -d "$(distdir)/$$subdir" \
|| $(MKDIR_P) "$(distdir)/$$subdir" \
|| exit 1; \
dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
$(am__relativize); \
new_distdir=$$reldir; \
dir1=$$subdir; dir2="$(top_distdir)"; \
$(am__relativize); \
new_top_distdir=$$reldir; \
echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
($(am__cd) $$subdir && \
$(MAKE) $(AM_MAKEFLAGS) \
top_distdir="$$new_top_distdir" \
distdir="$$new_distdir" \
am__remove_distdir=: \
am__skip_length_check=: \
am__skip_mode_fix=: \
distdir) \
|| exit 1; \
fi; \
done
$(MAKE) $(AM_MAKEFLAGS) \
top_distdir="$(top_distdir)" distdir="$(distdir)" \
dist-hook
-test -n "$(am__skip_mode_fix)" \
|| find "$(distdir)" -type d ! -perm -755 \
-exec chmod u+rwx,go+rx {} \; -o \
! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
! -type d ! -perm -400 -exec chmod a+r {} \; -o \
! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
|| chmod -R a+r "$(distdir)"
dist-gzip: distdir
tardir=$(distdir) && $(am__tar) | eval GZIP= gzip $(GZIP_ENV) -c >$(distdir).tar.gz
$(am__post_remove_distdir)
dist-bzip2: distdir
tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2
$(am__post_remove_distdir)
dist-lzip: distdir
tardir=$(distdir) && $(am__tar) | lzip -c $${LZIP_OPT--9} >$(distdir).tar.lz
$(am__post_remove_distdir)
dist-xz: distdir
tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz
$(am__post_remove_distdir)
dist-zstd: distdir
tardir=$(distdir) && $(am__tar) | zstd -c $${ZSTD_CLEVEL-$${ZSTD_OPT--19}} >$(distdir).tar.zst
$(am__post_remove_distdir)
dist-tarZ: distdir
@echo WARNING: "Support for distribution archives compressed with" \
"legacy program 'compress' is deprecated." >&2
@echo WARNING: "It will be removed altogether in Automake 2.0" >&2
tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
$(am__post_remove_distdir)
dist-shar: distdir
@echo WARNING: "Support for shar distribution archives is" \
"deprecated." >&2
@echo WARNING: "It will be removed altogether in Automake 2.0" >&2
shar $(distdir) | eval GZIP= gzip $(GZIP_ENV) -c >$(distdir).shar.gz
$(am__post_remove_distdir)
dist-zip: distdir
-rm -f $(distdir).zip
zip -rq $(distdir).zip $(distdir)
$(am__post_remove_distdir)
dist dist-all:
$(MAKE) $(AM_MAKEFLAGS) $(DIST_TARGETS) am__post_remove_distdir='@:'
$(am__post_remove_distdir)
# This target untars the dist file and tries a VPATH configuration. Then
# it guarantees that the distribution is self-contained by making another
# tarfile.
distcheck: dist
case '$(DIST_ARCHIVES)' in \
*.tar.gz*) \
eval GZIP= gzip -dc $(distdir).tar.gz | $(am__untar) ;;\
*.tar.bz2*) \
bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\
*.tar.lz*) \
lzip -dc $(distdir).tar.lz | $(am__untar) ;;\
*.tar.xz*) \
xz -dc $(distdir).tar.xz | $(am__untar) ;;\
*.tar.Z*) \
uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
*.shar.gz*) \
eval GZIP= gzip -dc $(distdir).shar.gz | unshar ;;\
*.zip*) \
unzip $(distdir).zip ;;\
*.tar.zst*) \
zstd -dc $(distdir).tar.zst | $(am__untar) ;;\
esac
chmod -R a-w $(distdir)
chmod u+w $(distdir)
mkdir $(distdir)/_build $(distdir)/_build/sub $(distdir)/_inst
chmod a-w $(distdir)
test -d $(distdir)/_build || exit 0; \
dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
&& dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
&& am__cwd=`pwd` \
&& $(am__cd) $(distdir)/_build/sub \
&& ../../configure \
$(AM_DISTCHECK_CONFIGURE_FLAGS) \
$(DISTCHECK_CONFIGURE_FLAGS) \
--srcdir=../.. --prefix="$$dc_install_base" \
&& $(MAKE) $(AM_MAKEFLAGS) \
&& $(MAKE) $(AM_MAKEFLAGS) $(AM_DISTCHECK_DVI_TARGET) \
&& $(MAKE) $(AM_MAKEFLAGS) check \
&& $(MAKE) $(AM_MAKEFLAGS) install \
&& $(MAKE) $(AM_MAKEFLAGS) installcheck \
&& $(MAKE) $(AM_MAKEFLAGS) uninstall \
&& $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
distuninstallcheck \
&& chmod -R a-w "$$dc_install_base" \
&& ({ \
(cd ../.. && umask 077 && mkdir "$$dc_destdir") \
&& $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
&& $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
&& $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
} || { rm -rf "$$dc_destdir"; exit 1; }) \
&& rm -rf "$$dc_destdir" \
&& $(MAKE) $(AM_MAKEFLAGS) dist \
&& rm -rf $(DIST_ARCHIVES) \
&& $(MAKE) $(AM_MAKEFLAGS) distcleancheck \
&& cd "$$am__cwd" \
|| exit 1
$(am__post_remove_distdir)
@(echo "$(distdir) archives ready for distribution: "; \
list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
distuninstallcheck:
@test -n '$(distuninstallcheck_dir)' || { \
echo 'ERROR: trying to run $@ with an empty' \
'$$(distuninstallcheck_dir)' >&2; \
exit 1; \
}; \
$(am__cd) '$(distuninstallcheck_dir)' || { \
echo 'ERROR: cannot chdir into $(distuninstallcheck_dir)' >&2; \
exit 1; \
}; \
test `$(am__distuninstallcheck_listfiles) | wc -l` -eq 0 \
|| { echo "ERROR: files left after uninstall:" ; \
if test -n "$(DESTDIR)"; then \
echo " (check DESTDIR support)"; \
fi ; \
$(distuninstallcheck_listfiles) ; \
exit 1; } >&2
distcleancheck: distclean
@if test '$(srcdir)' = . ; then \
echo "ERROR: distcleancheck can only run from a VPATH build" ; \
exit 1 ; \
fi
@test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
|| { echo "ERROR: files left in build directory after distclean:" ; \
$(distcleancheck_listfiles) ; \
exit 1; } >&2
check-am: all-am
check: check-recursive
all-am: Makefile $(DATA)
installdirs: installdirs-recursive
installdirs-am:
for dir in "$(DESTDIR)$(autostartdir)"; do \
test -z "$$dir" || $(MKDIR_P) "$$dir"; \
done
install: install-recursive
install-exec: install-exec-recursive
install-data: install-data-recursive
uninstall: uninstall-recursive
install-am: all-am
@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
installcheck: installcheck-recursive
install-strip:
if test -z '$(STRIP)'; then \
$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
install; \
else \
$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
"INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
fi
mostlyclean-generic:
clean-generic:
distclean-generic:
-$(am__rm_f) $(CONFIG_CLEAN_FILES)
-test . = "$(srcdir)" || $(am__rm_f) $(CONFIG_CLEAN_VPATH_FILES)
-$(am__rm_f) $(DISTCLEANFILES)
maintainer-clean-generic:
@echo "This command is intended for maintainers to use"
@echo "it deletes files that may require special tools to rebuild."
clean: clean-recursive
clean-am: clean-generic mostlyclean-am
distclean: distclean-recursive
-rm -f $(am__CONFIG_DISTCLEAN_FILES)
-rm -f Makefile
distclean-am: clean-am distclean-generic distclean-tags
dvi: dvi-recursive
dvi-am:
html: html-recursive
html-am:
info: info-recursive
info-am:
install-data-am: install-autostartDATA
@$(NORMAL_INSTALL)
$(MAKE) $(AM_MAKEFLAGS) install-data-hook
install-dvi: install-dvi-recursive
install-dvi-am:
install-exec-am:
install-html: install-html-recursive
install-html-am:
install-info: install-info-recursive
install-info-am:
install-man:
install-pdf: install-pdf-recursive
install-pdf-am:
install-ps: install-ps-recursive
install-ps-am:
installcheck-am:
maintainer-clean: maintainer-clean-recursive
-rm -f $(am__CONFIG_DISTCLEAN_FILES)
-rm -rf $(top_srcdir)/autom4te.cache
-rm -f Makefile
maintainer-clean-am: distclean-am maintainer-clean-generic
mostlyclean: mostlyclean-recursive
mostlyclean-am: mostlyclean-generic
pdf: pdf-recursive
pdf-am:
ps: ps-recursive
ps-am:
uninstall-am: uninstall-autostartDATA
@$(NORMAL_INSTALL)
$(MAKE) $(AM_MAKEFLAGS) uninstall-hook
.MAKE: $(am__recursive_targets) install-am install-data-am \
install-strip uninstall-am
.PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am \
am--refresh check check-am clean clean-cscope clean-generic \
cscope cscopelist-am ctags ctags-am dist dist-all dist-bzip2 \
dist-gzip dist-hook dist-lzip dist-shar dist-tarZ dist-xz \
dist-zip dist-zstd distcheck distclean distclean-generic \
distclean-tags distcleancheck distdir distuninstallcheck dvi \
dvi-am html html-am info info-am install install-am \
install-autostartDATA install-data install-data-am \
install-data-hook install-dvi install-dvi-am install-exec \
install-exec-am install-html install-html-am install-info \
install-info-am install-man install-pdf install-pdf-am \
install-ps install-ps-am install-strip installcheck \
installcheck-am installdirs installdirs-am maintainer-clean \
maintainer-clean-generic mostlyclean mostlyclean-generic pdf \
pdf-am ps ps-am tags tags-am uninstall uninstall-am \
uninstall-autostartDATA uninstall-hook
.PRECIOUS: Makefile
README: README.md
cp $< $@
install-data-hook: update-icon-cache
uninstall-hook: update-icon-cache
update-icon-cache:
@-if test -z "$(DESTDIR)"; then \
echo "Updating Gtk icon cache."; \
$(gtk_update_icon_cache); \
else \
echo "*** Icon cache not updated. After (un)install, run this:"; \
echo "*** $(gtk_update_icon_cache)"; \
fi
$(autostart_DATA): $(autostart_in_files)
$(AM_V_GEN)$(MSGFMT) --desktop --template $< -d $(top_srcdir)/po -o $@
dist-hook:
@if test -d "$(srcdir)/.git"; \
then \
echo Creating ChangeLog && \
( cd "$(top_srcdir)" && \
echo '# Generated by Makefile. Do not edit.'; echo; \
$(top_srcdir)/missing --run git log --pretty=format:"%ai %an <%ae>%n%n %s%n" --name-status ORCA_2_26_0.. ) > ChangeLog.tmp \
&& mv -f ChangeLog.tmp $(top_distdir)/ChangeLog \
|| ( rm -f ChangeLog.tmp ; \
echo Failed to generate ChangeLog >&2 ); \
else \
echo A git clone is required to generate a ChangeLog >&2; \
fi
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT:
# Tell GNU make to disable its built-in pattern rules.
%:: %,v
%:: RCS/%,v
%:: RCS/%
%:: s.%
%:: SCCS/s.%

13049
NEWS Normal file

File diff suppressed because it is too large Load Diff

1
QUICKSTART Normal file
View File

@ -0,0 +1 @@
See http://wiki.gnome.org/Projects/Orca

View File

@ -1,3 +1,74 @@
# cthulhu # Orca v45.3
This is a fork of the Orca screen reader, mostly just for fun. It's branched from the gnome 45 release. If you haven't heard about this in person and are working on it, you probably do not want to install it. Your distribution should include orca by default, and if you want the source, here is the [Orca git repository](https://gitlab.gnome.org/GNOME/orca). ## Introduction
Orca is a free, open source, flexible, and extensible screen reader
that provides access to the graphical desktop via user-customizable
combinations of speech and/or braille.
Orca works with applications and toolkits that support the assistive
technology service provider interface (AT-SPI), which is the primary
assistive technology infrastructure for the Solaris and Linux
operating environments. Applications and toolkits supporting the
AT-SPI include the GNOME GTK+ toolkit, the Java platform's Swing
toolkit, OpenOffice/LibreOffice, Gecko, and WebKitGtk. AT-SPI support
for the KDE Qt toolkit is currently being pursued.
See also <http://wiki.gnome.org/Projects/Orca> for detailed information
on Orca, including how to run Orca, how to communicate with the Orca user
community, and where to log bugs and feature requests.
## Dependencies
Orca v45.x is supported on GNOME 45.x only. We highly suggest you
use the latest releases of GNOME because they contain accessibility
infrastructure and application bug fixes that help Orca work better.
Orca also has the following dependencies:
* Python 3 - Python platform
* pygobject-3.0 - Python bindings for the GObject library
* gtk+-3.0 - GTK+ toolkit
* json-py - a JSON (<https://json.org/>) reader and writer in Python
* python-speechd - Python bindings for Speech Dispatcher (optional)
* BrlTTY - BrlTTY (<https://mielke.cc/brltty/>) support for braille (optional)
* BrlAPI - BrlAPI support for braille (optional)
* liblouis - Liblouis (<http://liblouis.org/>) support for contracted braille (optional)
* py-setproctitle - Python library to set the process title (optional)
* gstreamer-1.0 - GStreamer - Streaming media framework (optional)
You are strongly encouraged to also have the latest stable versions
of AT-SPI2 and ATK for the GNOME 45.x release.
## NOTE FOR BRLTTY USERS:
Orca depends upon the Python bindings for BrlAPI available in BrlTTY v4.5
or better. You can determine if the Python bindings for BrlAPI are
installed by running the following command:
```sh
python -c "import brlapi"
```
If you get an error, the Python bindings for BrlAPI are not installed.
## Running Orca
If you wish to modify your Orca preferences, you can press "Insert+space"
while Orca is running.
To get help while running Orca, press "Insert+H". This will enable
"learn mode", which provides a spoken and brailled description of what
various keyboard and braille input device actions will do. To exit
learn mode, press "Escape." Finally, the preferences dialog contains
a "Key Bindings" tab that lists the keyboard binding for Orca.
For more information, see the Orca documentation which is available
within Orca as well as at: <https://help.gnome.org/users/orca/stable/>
## Scripting Orca
So, you want to write a script for Orca? The best thing to do is
start by looking at other scripts under the src/orca/scripts/ hierarchy
of the source tree.

84
RELEASE-HOWTO Normal file
View File

@ -0,0 +1,84 @@
This document provides a step-by-step list to remind Orca
maintainers how to make a release.
The general instructions for a release are here:
https://wiki.gnome.org/MaintainersCorner/Releasing
See also:
https://discourse.gnome.org/t/new-gnome-versioning-scheme/4235
Here's a summary for Orca:
PREPARE SOURCES FOR THE RELEASE:
-------------------------------
Make sure you are up to date:
git pull
git status
Update ./NEWS with changes from the last tagged release. You can use
commands like the following:
Detailed commits since the ORCA_40_BETA tag:
git log ORCA_40_BETA..
Short list of translation changes with author names and files:
git log ORCA_40_BETA.. --grep translation --pretty=format:"%s - %an" --name-only
Quick-and-dirty formatted list of translation changes:
git log ORCA_40_BETA.. --grep translation --pretty=format:"%s,%an" --name-only |
awk -F/ '/\.(po|am)/ {gsub("(\.po|Makefile.am)", "", $NF); printf(",%s",$NF); next;}
{gsub("(Updated* |Add(ed)* | translation| help)", "", $0); printf("\n%s",$0);}' |
awk -F, '!seen[$0]++ {if (NF == 3) printf(" %-15s %-25s %s\n", $3, $1, $2);}' |
sort
Short list of non-translation commits:
git log ORCA_40_BETA.. --grep translation --invert-grep --pretty=format:" * %s%n"
NOTE: You should also make sure the external dependencies listed in
configure.ac and README are accurate.
BUILD THE RELEASE:
-----------------
./autogen.sh --prefix=`pwd`/bld && make && make install && make distcheck
COMMIT RELEASE CHANGES AND TAG THE RELEASE:
-------------------------------------------
git commit -a
git push
git tag -a -s ORCA_40_RC
git push origin ORCA_40_RC
UPLOAD THE RELEASE:
------------------
scp orca-40.rc.tar.xz yourusername@master.gnome.org:
ssh master.gnome.org
ftpadmin install orca-40.rc.tar.xz
BUMP THE VERSION:
-----------------
Modify this line in ./configure.ac:
m4_define([orca_version], [40.rc])
The major version (40) increments by 1 each new GNOME release cycle.
The minor version proceeds as follows: alpha, beta, rc, 0, 1, 2, 3, etc.
Modify ./README.md to make sure it has the right Orca version.
git commit -a
git push

2
TODO Normal file
View File

@ -0,0 +1,2 @@
All Orca TODO's are maintained as RFE's and bugs in the GNOME bugzilla
database: http://bugzilla.gnome.org/buglist.cgi?query=product%3Aorca

104
acinclude.m4 Normal file
View File

@ -0,0 +1,104 @@
dnl a macro to check for ability to create python extensions
dnl AM_CHECK_PYTHON_HEADERS([ACTION-IF-POSSIBLE], [ACTION-IF-NOT-POSSIBLE])
dnl function also defines PYTHON_INCLUDES
AC_DEFUN([AM_CHECK_PYTHON_HEADERS],
[AC_REQUIRE([AM_PATH_PYTHON])
AC_MSG_CHECKING(for headers required to compile python extensions)
dnl deduce PYTHON_INCLUDES
py_prefix=`$PYTHON -c "import sys; print sys.prefix"`
py_exec_prefix=`$PYTHON -c "import sys; print sys.exec_prefix"`
PYTHON_INCLUDES="-I${py_prefix}/include/python${PYTHON_VERSION}"
if test "$py_prefix" != "$py_exec_prefix"; then
PYTHON_INCLUDES="$PYTHON_INCLUDES -I${py_exec_prefix}/include/python${PYTHON_VERSION}"
fi
AC_SUBST(PYTHON_INCLUDES)
dnl check if the headers exist:
save_CPPFLAGS="$CPPFLAGS"
CPPFLAGS="$CPPFLAGS $PYTHON_INCLUDES"
AC_TRY_CPP([#include <Python.h>],dnl
[AC_MSG_RESULT(found)
$1],dnl
[AC_MSG_RESULT(not found)
$2])
CPPFLAGS="$save_CPPFLAGS"
])
dnl AM_CHECK_PYMOD(MODNAME [,SYMBOL [,ACTION-IF-FOUND [,ACTION-IF-NOT-FOUND]]])
dnl Check if a module containing a given symbol is visible to python.
AC_DEFUN([AM_CHECK_PYMOD],
[AC_REQUIRE([AM_PATH_PYTHON])
py_mod_var=`echo $1['_']$2 | sed 'y%./+-%__p_%'`
AC_MSG_CHECKING(for ifelse([$2],[],,[$2 in ])python module $1)
AC_CACHE_VAL(py_cv_mod_$py_mod_var, [
ifelse([$2],[], [prog="
import sys
try:
from gi.repository import GObject
import $1
except ImportError:
sys.exit(1)
except:
sys.exit(0)
sys.exit(0)"], [prog="
import $1
import $1.$2"])
if $PYTHON -c "$prog" 1>&AC_FD_CC 2>&AC_FD_CC
then
eval "py_cv_mod_$py_mod_var=yes"
else
eval "py_cv_mod_$py_mod_var=no"
fi
])
py_val=`eval "echo \`echo '$py_cv_mod_'$py_mod_var\`"`
if test "x$py_val" != xno; then
AC_MSG_RESULT(yes)
ifelse([$3], [],, [$3
])dnl
else
AC_MSG_RESULT(no)
ifelse([$4], [],, [$4
])dnl
fi
])
dnl PYDOC_CHECK()
AC_DEFUN([PYDOC_CHECK],
[
dnl enable/disable documentation building
AC_ARG_ENABLE(pydoc,
AC_HELP_STRING([--enable-pydoc],
[use pydoc to build documentation [default=no]]),,
enable_pydoc=no)
have_pydoc=no
if test x$enable_pydoc = xyes; then
AC_CHECK_FILE("$prefix/bin/pydoc", PYDOC="$prefix/bin/pydoc")
fi
if test -z "$PYDOC"; then
enable_pydoc=no
fi
AM_CONDITIONAL(ENABLE_PYDOC, test x$enable_pydoc = xyes)
])
dnl
dnl JH_ADD_CFLAG(FLAG)
dnl checks whether the C compiler supports the given flag, and if so, adds
dnl it to $CFLAGS. If the flag is already present in the list, then the
dnl check is not performed.
AC_DEFUN([JH_ADD_CFLAG],
[
case " $CFLAGS " in
*@<:@\ \ @:>@$1@<:@\ \ @:>@*)
;;
*)
save_CFLAGS="$CFLAGS"
CFLAGS="$CFLAGS $1"
AC_MSG_CHECKING([whether [$]CC understands $1])
AC_TRY_COMPILE([], [], [jh_has_option=yes], [jh_has_option=no])
AC_MSG_RESULT($jh_has_option)
if test $jh_has_option = no; then
CFLAGS="$save_CFLAGS"
fi
;;
esac])

1727
aclocal.m4 vendored Normal file

File diff suppressed because it is too large Load Diff

50
autogen.sh Executable file
View File

@ -0,0 +1,50 @@
#!/bin/sh
# Run this to generate all the initial makefiles, etc.
srcdir=`dirname $0`
test -z "$srcdir" && srcdir=.
(test -f $srcdir/configure.ac) || {
echo "**Error**: Directory "\`$srcdir\'" does not look like the top-level project directory"
exit 1
}
olddir=`pwd`
PKG_NAME=`autoconf --trace 'AC_INIT:$1' "$srcdir/configure.ac"`
if [ "$#" = 0 -a "x$NOCONFIGURE" = "x" ]; then
echo "**Warning**: I am going to run \`configure' with no arguments." >&2
echo "If you wish to pass any to it, please specify them on the" >&2
echo \`$0\'" command line." >&2
echo "" >&2
fi
cd "$srcdir"
aclocal --install || {
echo "Try installing the 'automake' package."
exit 1
}
autoreconf --verbose --force --install -Wno-portability || {
echo "Try installing the 'autoconf' package."
exit 1
}
which yelp-build > /dev/null || {
echo "Try installing the 'yelp-tools' package."
exit 1
}
cd "$olddir"
if [ "$NOCONFIGURE" = "" ]; then
$srcdir/configure "$@" || exit 1
if [ "$1" = "--help" ]; then exit 0 else
echo "Now type \`make\' to compile $PKG_NAME" || exit 1
fi
else
echo "Skipping configure process."
fi

3245
autom4te.cache/output.0 Normal file

File diff suppressed because it is too large Load Diff

10148
autom4te.cache/output.1 Normal file

File diff suppressed because it is too large Load Diff

10660
autom4te.cache/output.10 Normal file

File diff suppressed because it is too large Load Diff

10148
autom4te.cache/output.2 Normal file

File diff suppressed because it is too large Load Diff

10660
autom4te.cache/output.3 Normal file

File diff suppressed because it is too large Load Diff

10661
autom4te.cache/output.4 Normal file

File diff suppressed because it is too large Load Diff

10475
autom4te.cache/output.5 Normal file

File diff suppressed because it is too large Load Diff

10475
autom4te.cache/output.6 Normal file

File diff suppressed because it is too large Load Diff

10475
autom4te.cache/output.7 Normal file

File diff suppressed because it is too large Load Diff

10333
autom4te.cache/output.8 Normal file

File diff suppressed because it is too large Load Diff

10660
autom4te.cache/output.9 Normal file

File diff suppressed because it is too large Load Diff

1365
autom4te.cache/requests Normal file

File diff suppressed because it is too large Load Diff

241
autom4te.cache/traces.0 Normal file
View File

@ -0,0 +1,241 @@
m4trace:configure.ac:7: -1- AC_INIT([orca], [orca_version], [https://gitlab.gnome.org/GNOME/orca/-/issues/], [orca])
m4trace:configure.ac:7: -1- m4_pattern_forbid([^_?A[CHUM]_])
m4trace:configure.ac:7: -1- m4_pattern_forbid([_AC_])
m4trace:configure.ac:7: -1- m4_pattern_forbid([^LIBOBJS$], [do not use LIBOBJS directly, use AC_LIBOBJ (see section 'AC_LIBOBJ vs LIBOBJS'])
m4trace:configure.ac:7: -1- m4_pattern_allow([^AS_FLAGS$])
m4trace:configure.ac:7: -1- m4_pattern_forbid([^_?m4_])
m4trace:configure.ac:7: -1- m4_pattern_forbid([^dnl$])
m4trace:configure.ac:7: -1- m4_pattern_forbid([^_?AS_])
m4trace:configure.ac:7: -1- AC_SUBST([SHELL])
m4trace:configure.ac:7: -1- AC_SUBST_TRACE([SHELL])
m4trace:configure.ac:7: -1- m4_pattern_allow([^SHELL$])
m4trace:configure.ac:7: -1- AC_SUBST([PATH_SEPARATOR])
m4trace:configure.ac:7: -1- AC_SUBST_TRACE([PATH_SEPARATOR])
m4trace:configure.ac:7: -1- m4_pattern_allow([^PATH_SEPARATOR$])
m4trace:configure.ac:7: -1- AC_SUBST([PACKAGE_NAME], [m4_ifdef([AC_PACKAGE_NAME], ['AC_PACKAGE_NAME'])])
m4trace:configure.ac:7: -1- AC_SUBST_TRACE([PACKAGE_NAME])
m4trace:configure.ac:7: -1- m4_pattern_allow([^PACKAGE_NAME$])
m4trace:configure.ac:7: -1- AC_SUBST([PACKAGE_TARNAME], [m4_ifdef([AC_PACKAGE_TARNAME], ['AC_PACKAGE_TARNAME'])])
m4trace:configure.ac:7: -1- AC_SUBST_TRACE([PACKAGE_TARNAME])
m4trace:configure.ac:7: -1- m4_pattern_allow([^PACKAGE_TARNAME$])
m4trace:configure.ac:7: -1- AC_SUBST([PACKAGE_VERSION], [m4_ifdef([AC_PACKAGE_VERSION], ['AC_PACKAGE_VERSION'])])
m4trace:configure.ac:7: -1- AC_SUBST_TRACE([PACKAGE_VERSION])
m4trace:configure.ac:7: -1- m4_pattern_allow([^PACKAGE_VERSION$])
m4trace:configure.ac:7: -1- AC_SUBST([PACKAGE_STRING], [m4_ifdef([AC_PACKAGE_STRING], ['AC_PACKAGE_STRING'])])
m4trace:configure.ac:7: -1- AC_SUBST_TRACE([PACKAGE_STRING])
m4trace:configure.ac:7: -1- m4_pattern_allow([^PACKAGE_STRING$])
m4trace:configure.ac:7: -1- AC_SUBST([PACKAGE_BUGREPORT], [m4_ifdef([AC_PACKAGE_BUGREPORT], ['AC_PACKAGE_BUGREPORT'])])
m4trace:configure.ac:7: -1- AC_SUBST_TRACE([PACKAGE_BUGREPORT])
m4trace:configure.ac:7: -1- m4_pattern_allow([^PACKAGE_BUGREPORT$])
m4trace:configure.ac:7: -1- AC_SUBST([PACKAGE_URL], [m4_ifdef([AC_PACKAGE_URL], ['AC_PACKAGE_URL'])])
m4trace:configure.ac:7: -1- AC_SUBST_TRACE([PACKAGE_URL])
m4trace:configure.ac:7: -1- m4_pattern_allow([^PACKAGE_URL$])
m4trace:configure.ac:7: -1- AC_SUBST([exec_prefix], [NONE])
m4trace:configure.ac:7: -1- AC_SUBST_TRACE([exec_prefix])
m4trace:configure.ac:7: -1- m4_pattern_allow([^exec_prefix$])
m4trace:configure.ac:7: -1- AC_SUBST([prefix], [NONE])
m4trace:configure.ac:7: -1- AC_SUBST_TRACE([prefix])
m4trace:configure.ac:7: -1- m4_pattern_allow([^prefix$])
m4trace:configure.ac:7: -1- AC_SUBST([program_transform_name], [s,x,x,])
m4trace:configure.ac:7: -1- AC_SUBST_TRACE([program_transform_name])
m4trace:configure.ac:7: -1- m4_pattern_allow([^program_transform_name$])
m4trace:configure.ac:7: -1- AC_SUBST([bindir], ['${exec_prefix}/bin'])
m4trace:configure.ac:7: -1- AC_SUBST_TRACE([bindir])
m4trace:configure.ac:7: -1- m4_pattern_allow([^bindir$])
m4trace:configure.ac:7: -1- AC_SUBST([sbindir], ['${exec_prefix}/sbin'])
m4trace:configure.ac:7: -1- AC_SUBST_TRACE([sbindir])
m4trace:configure.ac:7: -1- m4_pattern_allow([^sbindir$])
m4trace:configure.ac:7: -1- AC_SUBST([libexecdir], ['${exec_prefix}/libexec'])
m4trace:configure.ac:7: -1- AC_SUBST_TRACE([libexecdir])
m4trace:configure.ac:7: -1- m4_pattern_allow([^libexecdir$])
m4trace:configure.ac:7: -1- AC_SUBST([datarootdir], ['${prefix}/share'])
m4trace:configure.ac:7: -1- AC_SUBST_TRACE([datarootdir])
m4trace:configure.ac:7: -1- m4_pattern_allow([^datarootdir$])
m4trace:configure.ac:7: -1- AC_SUBST([datadir], ['${datarootdir}'])
m4trace:configure.ac:7: -1- AC_SUBST_TRACE([datadir])
m4trace:configure.ac:7: -1- m4_pattern_allow([^datadir$])
m4trace:configure.ac:7: -1- AC_SUBST([sysconfdir], ['${prefix}/etc'])
m4trace:configure.ac:7: -1- AC_SUBST_TRACE([sysconfdir])
m4trace:configure.ac:7: -1- m4_pattern_allow([^sysconfdir$])
m4trace:configure.ac:7: -1- AC_SUBST([sharedstatedir], ['${prefix}/com'])
m4trace:configure.ac:7: -1- AC_SUBST_TRACE([sharedstatedir])
m4trace:configure.ac:7: -1- m4_pattern_allow([^sharedstatedir$])
m4trace:configure.ac:7: -1- AC_SUBST([localstatedir], ['${prefix}/var'])
m4trace:configure.ac:7: -1- AC_SUBST_TRACE([localstatedir])
m4trace:configure.ac:7: -1- m4_pattern_allow([^localstatedir$])
m4trace:configure.ac:7: -1- AC_SUBST([runstatedir], ['${localstatedir}/run'])
m4trace:configure.ac:7: -1- AC_SUBST_TRACE([runstatedir])
m4trace:configure.ac:7: -1- m4_pattern_allow([^runstatedir$])
m4trace:configure.ac:7: -1- AC_SUBST([includedir], ['${prefix}/include'])
m4trace:configure.ac:7: -1- AC_SUBST_TRACE([includedir])
m4trace:configure.ac:7: -1- m4_pattern_allow([^includedir$])
m4trace:configure.ac:7: -1- AC_SUBST([oldincludedir], ['/usr/include'])
m4trace:configure.ac:7: -1- AC_SUBST_TRACE([oldincludedir])
m4trace:configure.ac:7: -1- m4_pattern_allow([^oldincludedir$])
m4trace:configure.ac:7: -1- AC_SUBST([docdir], [m4_ifset([AC_PACKAGE_TARNAME],
['${datarootdir}/doc/${PACKAGE_TARNAME}'],
['${datarootdir}/doc/${PACKAGE}'])])
m4trace:configure.ac:7: -1- AC_SUBST_TRACE([docdir])
m4trace:configure.ac:7: -1- m4_pattern_allow([^docdir$])
m4trace:configure.ac:7: -1- AC_SUBST([infodir], ['${datarootdir}/info'])
m4trace:configure.ac:7: -1- AC_SUBST_TRACE([infodir])
m4trace:configure.ac:7: -1- m4_pattern_allow([^infodir$])
m4trace:configure.ac:7: -1- AC_SUBST([htmldir], ['${docdir}'])
m4trace:configure.ac:7: -1- AC_SUBST_TRACE([htmldir])
m4trace:configure.ac:7: -1- m4_pattern_allow([^htmldir$])
m4trace:configure.ac:7: -1- AC_SUBST([dvidir], ['${docdir}'])
m4trace:configure.ac:7: -1- AC_SUBST_TRACE([dvidir])
m4trace:configure.ac:7: -1- m4_pattern_allow([^dvidir$])
m4trace:configure.ac:7: -1- AC_SUBST([pdfdir], ['${docdir}'])
m4trace:configure.ac:7: -1- AC_SUBST_TRACE([pdfdir])
m4trace:configure.ac:7: -1- m4_pattern_allow([^pdfdir$])
m4trace:configure.ac:7: -1- AC_SUBST([psdir], ['${docdir}'])
m4trace:configure.ac:7: -1- AC_SUBST_TRACE([psdir])
m4trace:configure.ac:7: -1- m4_pattern_allow([^psdir$])
m4trace:configure.ac:7: -1- AC_SUBST([libdir], ['${exec_prefix}/lib'])
m4trace:configure.ac:7: -1- AC_SUBST_TRACE([libdir])
m4trace:configure.ac:7: -1- m4_pattern_allow([^libdir$])
m4trace:configure.ac:7: -1- AC_SUBST([localedir], ['${datarootdir}/locale'])
m4trace:configure.ac:7: -1- AC_SUBST_TRACE([localedir])
m4trace:configure.ac:7: -1- m4_pattern_allow([^localedir$])
m4trace:configure.ac:7: -1- AC_SUBST([mandir], ['${datarootdir}/man'])
m4trace:configure.ac:7: -1- AC_SUBST_TRACE([mandir])
m4trace:configure.ac:7: -1- m4_pattern_allow([^mandir$])
m4trace:configure.ac:7: -1- AC_DEFINE_TRACE_LITERAL([PACKAGE_NAME])
m4trace:configure.ac:7: -1- m4_pattern_allow([^PACKAGE_NAME$])
m4trace:configure.ac:7: -1- AH_OUTPUT([PACKAGE_NAME], [/* Define to the full name of this package. */
@%:@undef PACKAGE_NAME])
m4trace:configure.ac:7: -1- AC_DEFINE_TRACE_LITERAL([PACKAGE_TARNAME])
m4trace:configure.ac:7: -1- m4_pattern_allow([^PACKAGE_TARNAME$])
m4trace:configure.ac:7: -1- AH_OUTPUT([PACKAGE_TARNAME], [/* Define to the one symbol short name of this package. */
@%:@undef PACKAGE_TARNAME])
m4trace:configure.ac:7: -1- AC_DEFINE_TRACE_LITERAL([PACKAGE_VERSION])
m4trace:configure.ac:7: -1- m4_pattern_allow([^PACKAGE_VERSION$])
m4trace:configure.ac:7: -1- AH_OUTPUT([PACKAGE_VERSION], [/* Define to the version of this package. */
@%:@undef PACKAGE_VERSION])
m4trace:configure.ac:7: -1- AC_DEFINE_TRACE_LITERAL([PACKAGE_STRING])
m4trace:configure.ac:7: -1- m4_pattern_allow([^PACKAGE_STRING$])
m4trace:configure.ac:7: -1- AH_OUTPUT([PACKAGE_STRING], [/* Define to the full name and version of this package. */
@%:@undef PACKAGE_STRING])
m4trace:configure.ac:7: -1- AC_DEFINE_TRACE_LITERAL([PACKAGE_BUGREPORT])
m4trace:configure.ac:7: -1- m4_pattern_allow([^PACKAGE_BUGREPORT$])
m4trace:configure.ac:7: -1- AH_OUTPUT([PACKAGE_BUGREPORT], [/* Define to the address where bug reports for this package should be sent. */
@%:@undef PACKAGE_BUGREPORT])
m4trace:configure.ac:7: -1- AC_DEFINE_TRACE_LITERAL([PACKAGE_URL])
m4trace:configure.ac:7: -1- m4_pattern_allow([^PACKAGE_URL$])
m4trace:configure.ac:7: -1- AH_OUTPUT([PACKAGE_URL], [/* Define to the home page for this package. */
@%:@undef PACKAGE_URL])
m4trace:configure.ac:7: -1- AC_SUBST([DEFS])
m4trace:configure.ac:7: -1- AC_SUBST_TRACE([DEFS])
m4trace:configure.ac:7: -1- m4_pattern_allow([^DEFS$])
m4trace:configure.ac:7: -1- AC_SUBST([ECHO_C])
m4trace:configure.ac:7: -1- AC_SUBST_TRACE([ECHO_C])
m4trace:configure.ac:7: -1- m4_pattern_allow([^ECHO_C$])
m4trace:configure.ac:7: -1- AC_SUBST([ECHO_N])
m4trace:configure.ac:7: -1- AC_SUBST_TRACE([ECHO_N])
m4trace:configure.ac:7: -1- m4_pattern_allow([^ECHO_N$])
m4trace:configure.ac:7: -1- AC_SUBST([ECHO_T])
m4trace:configure.ac:7: -1- AC_SUBST_TRACE([ECHO_T])
m4trace:configure.ac:7: -1- m4_pattern_allow([^ECHO_T$])
m4trace:configure.ac:7: -1- AC_SUBST([LIBS])
m4trace:configure.ac:7: -1- AC_SUBST_TRACE([LIBS])
m4trace:configure.ac:7: -1- m4_pattern_allow([^LIBS$])
m4trace:configure.ac:7: -1- AC_SUBST([build_alias])
m4trace:configure.ac:7: -1- AC_SUBST_TRACE([build_alias])
m4trace:configure.ac:7: -1- m4_pattern_allow([^build_alias$])
m4trace:configure.ac:7: -1- AC_SUBST([host_alias])
m4trace:configure.ac:7: -1- AC_SUBST_TRACE([host_alias])
m4trace:configure.ac:7: -1- m4_pattern_allow([^host_alias$])
m4trace:configure.ac:7: -1- AC_SUBST([target_alias])
m4trace:configure.ac:7: -1- AC_SUBST_TRACE([target_alias])
m4trace:configure.ac:7: -1- m4_pattern_allow([^target_alias$])
m4trace:configure.ac:9: -1- AC_CONFIG_MACRO_DIR_TRACE([m4])
m4trace:configure.ac:21: -1- AC_SUBST([GETTEXT_PACKAGE])
m4trace:configure.ac:21: -1- AC_SUBST_TRACE([GETTEXT_PACKAGE])
m4trace:configure.ac:21: -1- m4_pattern_allow([^GETTEXT_PACKAGE$])
m4trace:configure.ac:22: -1- AC_DEFINE_TRACE_LITERAL([GETTEXT_PACKAGE])
m4trace:configure.ac:22: -1- m4_pattern_allow([^GETTEXT_PACKAGE$])
m4trace:configure.ac:22: -1- AH_OUTPUT([GETTEXT_PACKAGE], [/* gettext package */
@%:@undef GETTEXT_PACKAGE])
m4trace:configure.ac:33: -1- AC_REQUIRE_AUX_FILE([install-sh])
m4trace:configure.ac:33: -1- AC_SUBST([INSTALL_PROGRAM])
m4trace:configure.ac:33: -1- AC_SUBST_TRACE([INSTALL_PROGRAM])
m4trace:configure.ac:33: -1- m4_pattern_allow([^INSTALL_PROGRAM$])
m4trace:configure.ac:33: -1- AC_SUBST([INSTALL_SCRIPT])
m4trace:configure.ac:33: -1- AC_SUBST_TRACE([INSTALL_SCRIPT])
m4trace:configure.ac:33: -1- m4_pattern_allow([^INSTALL_SCRIPT$])
m4trace:configure.ac:33: -1- AC_SUBST([INSTALL_DATA])
m4trace:configure.ac:33: -1- AC_SUBST_TRACE([INSTALL_DATA])
m4trace:configure.ac:33: -1- m4_pattern_allow([^INSTALL_DATA$])
m4trace:configure.ac:62: -1- AC_SUBST([LOUIS_TABLE_DIR])
m4trace:configure.ac:62: -1- AC_SUBST_TRACE([LOUIS_TABLE_DIR])
m4trace:configure.ac:62: -1- m4_pattern_allow([^LOUIS_TABLE_DIR$])
m4trace:configure.ac:65: -1- AC_SUBST([REVISION])
m4trace:configure.ac:65: -1- AC_SUBST_TRACE([REVISION])
m4trace:configure.ac:65: -1- m4_pattern_allow([^REVISION$])
m4trace:configure.ac:77: -1- AC_SUBST([PLATFORM_PATH])
m4trace:configure.ac:77: -1- AC_SUBST_TRACE([PLATFORM_PATH])
m4trace:configure.ac:77: -1- m4_pattern_allow([^PLATFORM_PATH$])
m4trace:configure.ac:79: -1- AC_CONFIG_FILES([
Makefile
docs/Makefile
docs/man/Makefile
po/Makefile.in
help/Makefile
icons/Makefile
src/Makefile
src/orca/Makefile
src/orca/scripts/Makefile
src/orca/scripts/apps/Makefile
src/orca/scripts/apps/Banshee/Makefile
src/orca/scripts/apps/Eclipse/Makefile
src/orca/scripts/apps/epiphany/Makefile
src/orca/scripts/apps/evince/Makefile
src/orca/scripts/apps/evolution/Makefile
src/orca/scripts/apps/gajim/Makefile
src/orca/scripts/apps/gcalctool/Makefile
src/orca/scripts/apps/gedit/Makefile
src/orca/scripts/apps/gnome-documents/Makefile
src/orca/scripts/apps/gnome-shell/Makefile
src/orca/scripts/apps/kwin/Makefile
src/orca/scripts/apps/notification-daemon/Makefile
src/orca/scripts/apps/notify-osd/Makefile
src/orca/scripts/apps/pidgin/Makefile
src/orca/scripts/apps/soffice/Makefile
src/orca/scripts/apps/SeaMonkey/Makefile
src/orca/scripts/apps/smuxi-frontend-gnome/Makefile
src/orca/scripts/apps/Thunderbird/Makefile
src/orca/scripts/apps/xfwm4/Makefile
src/orca/scripts/switcher/Makefile
src/orca/scripts/terminal/Makefile
src/orca/scripts/web/Makefile
src/orca/scripts/toolkits/Makefile
src/orca/scripts/toolkits/Chromium/Makefile
src/orca/scripts/toolkits/Gecko/Makefile
src/orca/scripts/toolkits/J2SE-access-bridge/Makefile
src/orca/scripts/toolkits/clutter/Makefile
src/orca/scripts/toolkits/GAIL/Makefile
src/orca/scripts/toolkits/Qt/Makefile
src/orca/scripts/toolkits/WebKitGtk/Makefile
src/orca/scripts/toolkits/gtk/Makefile
src/orca/backends/Makefile
src/orca/orca_bin.py
src/orca/orca_i18n.py
src/orca/orca_platform.py
])
m4trace:configure.ac:127: -1- AC_SUBST([LIB@&t@OBJS], [$ac_libobjs])
m4trace:configure.ac:127: -1- AC_SUBST_TRACE([LIB@&t@OBJS])
m4trace:configure.ac:127: -1- m4_pattern_allow([^LIB@&t@OBJS$])
m4trace:configure.ac:127: -1- AC_SUBST([LTLIBOBJS], [$ac_ltlibobjs])
m4trace:configure.ac:127: -1- AC_SUBST_TRACE([LTLIBOBJS])
m4trace:configure.ac:127: -1- m4_pattern_allow([^LTLIBOBJS$])
m4trace:configure.ac:127: -1- AC_SUBST_TRACE([top_builddir])
m4trace:configure.ac:127: -1- AC_SUBST_TRACE([top_build_prefix])
m4trace:configure.ac:127: -1- AC_SUBST_TRACE([srcdir])
m4trace:configure.ac:127: -1- AC_SUBST_TRACE([abs_srcdir])
m4trace:configure.ac:127: -1- AC_SUBST_TRACE([top_srcdir])
m4trace:configure.ac:127: -1- AC_SUBST_TRACE([abs_top_srcdir])
m4trace:configure.ac:127: -1- AC_SUBST_TRACE([builddir])
m4trace:configure.ac:127: -1- AC_SUBST_TRACE([abs_builddir])
m4trace:configure.ac:127: -1- AC_SUBST_TRACE([abs_top_builddir])
m4trace:configure.ac:127: -1- AC_SUBST_TRACE([INSTALL])

4620
autom4te.cache/traces.1 Normal file

File diff suppressed because it is too large Load Diff

4994
autom4te.cache/traces.10 Normal file

File diff suppressed because it is too large Load Diff

4620
autom4te.cache/traces.2 Normal file

File diff suppressed because it is too large Load Diff

762
autom4te.cache/traces.3 Normal file
View File

@ -0,0 +1,762 @@
m4trace:aclocal.m4:697: -1- AC_SUBST([am__quote])
m4trace:aclocal.m4:697: -1- AC_SUBST_TRACE([am__quote])
m4trace:aclocal.m4:697: -1- m4_pattern_allow([^am__quote$])
m4trace:aclocal.m4:1714: -1- m4_include([m4/build-to-host.m4])
m4trace:aclocal.m4:1715: -1- m4_include([m4/gettext.m4])
m4trace:aclocal.m4:1716: -1- m4_include([m4/host-cpu-c-abi.m4])
m4trace:aclocal.m4:1717: -1- m4_include([m4/iconv.m4])
m4trace:aclocal.m4:1718: -1- m4_include([m4/intlmacosx.m4])
m4trace:aclocal.m4:1719: -1- m4_include([m4/lib-ld.m4])
m4trace:aclocal.m4:1720: -1- m4_include([m4/lib-link.m4])
m4trace:aclocal.m4:1721: -1- m4_include([m4/lib-prefix.m4])
m4trace:aclocal.m4:1722: -1- m4_include([m4/nls.m4])
m4trace:aclocal.m4:1723: -1- m4_include([m4/pkg.m4])
m4trace:aclocal.m4:1724: -1- m4_include([m4/po.m4])
m4trace:aclocal.m4:1725: -1- m4_include([m4/progtest.m4])
m4trace:aclocal.m4:1726: -1- m4_include([m4/yelp.m4])
m4trace:aclocal.m4:1727: -1- m4_include([acinclude.m4])
m4trace:configure.ac:7: -1- AC_INIT([orca], [orca_version], [https://gitlab.gnome.org/GNOME/orca/-/issues/], [orca])
m4trace:configure.ac:7: -1- m4_pattern_forbid([^_?A[CHUM]_])
m4trace:configure.ac:7: -1- m4_pattern_forbid([_AC_])
m4trace:configure.ac:7: -1- m4_pattern_forbid([^LIBOBJS$], [do not use LIBOBJS directly, use AC_LIBOBJ (see section 'AC_LIBOBJ vs LIBOBJS'])
m4trace:configure.ac:7: -1- m4_pattern_allow([^AS_FLAGS$])
m4trace:configure.ac:7: -1- m4_pattern_forbid([^_?m4_])
m4trace:configure.ac:7: -1- m4_pattern_forbid([^dnl$])
m4trace:configure.ac:7: -1- m4_pattern_forbid([^_?AS_])
m4trace:configure.ac:7: -1- AC_SUBST([SHELL])
m4trace:configure.ac:7: -1- AC_SUBST_TRACE([SHELL])
m4trace:configure.ac:7: -1- m4_pattern_allow([^SHELL$])
m4trace:configure.ac:7: -1- AC_SUBST([PATH_SEPARATOR])
m4trace:configure.ac:7: -1- AC_SUBST_TRACE([PATH_SEPARATOR])
m4trace:configure.ac:7: -1- m4_pattern_allow([^PATH_SEPARATOR$])
m4trace:configure.ac:7: -1- AC_SUBST([PACKAGE_NAME], [m4_ifdef([AC_PACKAGE_NAME], ['AC_PACKAGE_NAME'])])
m4trace:configure.ac:7: -1- AC_SUBST_TRACE([PACKAGE_NAME])
m4trace:configure.ac:7: -1- m4_pattern_allow([^PACKAGE_NAME$])
m4trace:configure.ac:7: -1- AC_SUBST([PACKAGE_TARNAME], [m4_ifdef([AC_PACKAGE_TARNAME], ['AC_PACKAGE_TARNAME'])])
m4trace:configure.ac:7: -1- AC_SUBST_TRACE([PACKAGE_TARNAME])
m4trace:configure.ac:7: -1- m4_pattern_allow([^PACKAGE_TARNAME$])
m4trace:configure.ac:7: -1- AC_SUBST([PACKAGE_VERSION], [m4_ifdef([AC_PACKAGE_VERSION], ['AC_PACKAGE_VERSION'])])
m4trace:configure.ac:7: -1- AC_SUBST_TRACE([PACKAGE_VERSION])
m4trace:configure.ac:7: -1- m4_pattern_allow([^PACKAGE_VERSION$])
m4trace:configure.ac:7: -1- AC_SUBST([PACKAGE_STRING], [m4_ifdef([AC_PACKAGE_STRING], ['AC_PACKAGE_STRING'])])
m4trace:configure.ac:7: -1- AC_SUBST_TRACE([PACKAGE_STRING])
m4trace:configure.ac:7: -1- m4_pattern_allow([^PACKAGE_STRING$])
m4trace:configure.ac:7: -1- AC_SUBST([PACKAGE_BUGREPORT], [m4_ifdef([AC_PACKAGE_BUGREPORT], ['AC_PACKAGE_BUGREPORT'])])
m4trace:configure.ac:7: -1- AC_SUBST_TRACE([PACKAGE_BUGREPORT])
m4trace:configure.ac:7: -1- m4_pattern_allow([^PACKAGE_BUGREPORT$])
m4trace:configure.ac:7: -1- AC_SUBST([PACKAGE_URL], [m4_ifdef([AC_PACKAGE_URL], ['AC_PACKAGE_URL'])])
m4trace:configure.ac:7: -1- AC_SUBST_TRACE([PACKAGE_URL])
m4trace:configure.ac:7: -1- m4_pattern_allow([^PACKAGE_URL$])
m4trace:configure.ac:7: -1- AC_SUBST([exec_prefix], [NONE])
m4trace:configure.ac:7: -1- AC_SUBST_TRACE([exec_prefix])
m4trace:configure.ac:7: -1- m4_pattern_allow([^exec_prefix$])
m4trace:configure.ac:7: -1- AC_SUBST([prefix], [NONE])
m4trace:configure.ac:7: -1- AC_SUBST_TRACE([prefix])
m4trace:configure.ac:7: -1- m4_pattern_allow([^prefix$])
m4trace:configure.ac:7: -1- AC_SUBST([program_transform_name], [s,x,x,])
m4trace:configure.ac:7: -1- AC_SUBST_TRACE([program_transform_name])
m4trace:configure.ac:7: -1- m4_pattern_allow([^program_transform_name$])
m4trace:configure.ac:7: -1- AC_SUBST([bindir], ['${exec_prefix}/bin'])
m4trace:configure.ac:7: -1- AC_SUBST_TRACE([bindir])
m4trace:configure.ac:7: -1- m4_pattern_allow([^bindir$])
m4trace:configure.ac:7: -1- AC_SUBST([sbindir], ['${exec_prefix}/sbin'])
m4trace:configure.ac:7: -1- AC_SUBST_TRACE([sbindir])
m4trace:configure.ac:7: -1- m4_pattern_allow([^sbindir$])
m4trace:configure.ac:7: -1- AC_SUBST([libexecdir], ['${exec_prefix}/libexec'])
m4trace:configure.ac:7: -1- AC_SUBST_TRACE([libexecdir])
m4trace:configure.ac:7: -1- m4_pattern_allow([^libexecdir$])
m4trace:configure.ac:7: -1- AC_SUBST([datarootdir], ['${prefix}/share'])
m4trace:configure.ac:7: -1- AC_SUBST_TRACE([datarootdir])
m4trace:configure.ac:7: -1- m4_pattern_allow([^datarootdir$])
m4trace:configure.ac:7: -1- AC_SUBST([datadir], ['${datarootdir}'])
m4trace:configure.ac:7: -1- AC_SUBST_TRACE([datadir])
m4trace:configure.ac:7: -1- m4_pattern_allow([^datadir$])
m4trace:configure.ac:7: -1- AC_SUBST([sysconfdir], ['${prefix}/etc'])
m4trace:configure.ac:7: -1- AC_SUBST_TRACE([sysconfdir])
m4trace:configure.ac:7: -1- m4_pattern_allow([^sysconfdir$])
m4trace:configure.ac:7: -1- AC_SUBST([sharedstatedir], ['${prefix}/com'])
m4trace:configure.ac:7: -1- AC_SUBST_TRACE([sharedstatedir])
m4trace:configure.ac:7: -1- m4_pattern_allow([^sharedstatedir$])
m4trace:configure.ac:7: -1- AC_SUBST([localstatedir], ['${prefix}/var'])
m4trace:configure.ac:7: -1- AC_SUBST_TRACE([localstatedir])
m4trace:configure.ac:7: -1- m4_pattern_allow([^localstatedir$])
m4trace:configure.ac:7: -1- AC_SUBST([runstatedir], ['${localstatedir}/run'])
m4trace:configure.ac:7: -1- AC_SUBST_TRACE([runstatedir])
m4trace:configure.ac:7: -1- m4_pattern_allow([^runstatedir$])
m4trace:configure.ac:7: -1- AC_SUBST([includedir], ['${prefix}/include'])
m4trace:configure.ac:7: -1- AC_SUBST_TRACE([includedir])
m4trace:configure.ac:7: -1- m4_pattern_allow([^includedir$])
m4trace:configure.ac:7: -1- AC_SUBST([oldincludedir], ['/usr/include'])
m4trace:configure.ac:7: -1- AC_SUBST_TRACE([oldincludedir])
m4trace:configure.ac:7: -1- m4_pattern_allow([^oldincludedir$])
m4trace:configure.ac:7: -1- AC_SUBST([docdir], [m4_ifset([AC_PACKAGE_TARNAME],
['${datarootdir}/doc/${PACKAGE_TARNAME}'],
['${datarootdir}/doc/${PACKAGE}'])])
m4trace:configure.ac:7: -1- AC_SUBST_TRACE([docdir])
m4trace:configure.ac:7: -1- m4_pattern_allow([^docdir$])
m4trace:configure.ac:7: -1- AC_SUBST([infodir], ['${datarootdir}/info'])
m4trace:configure.ac:7: -1- AC_SUBST_TRACE([infodir])
m4trace:configure.ac:7: -1- m4_pattern_allow([^infodir$])
m4trace:configure.ac:7: -1- AC_SUBST([htmldir], ['${docdir}'])
m4trace:configure.ac:7: -1- AC_SUBST_TRACE([htmldir])
m4trace:configure.ac:7: -1- m4_pattern_allow([^htmldir$])
m4trace:configure.ac:7: -1- AC_SUBST([dvidir], ['${docdir}'])
m4trace:configure.ac:7: -1- AC_SUBST_TRACE([dvidir])
m4trace:configure.ac:7: -1- m4_pattern_allow([^dvidir$])
m4trace:configure.ac:7: -1- AC_SUBST([pdfdir], ['${docdir}'])
m4trace:configure.ac:7: -1- AC_SUBST_TRACE([pdfdir])
m4trace:configure.ac:7: -1- m4_pattern_allow([^pdfdir$])
m4trace:configure.ac:7: -1- AC_SUBST([psdir], ['${docdir}'])
m4trace:configure.ac:7: -1- AC_SUBST_TRACE([psdir])
m4trace:configure.ac:7: -1- m4_pattern_allow([^psdir$])
m4trace:configure.ac:7: -1- AC_SUBST([libdir], ['${exec_prefix}/lib'])
m4trace:configure.ac:7: -1- AC_SUBST_TRACE([libdir])
m4trace:configure.ac:7: -1- m4_pattern_allow([^libdir$])
m4trace:configure.ac:7: -1- AC_SUBST([localedir], ['${datarootdir}/locale'])
m4trace:configure.ac:7: -1- AC_SUBST_TRACE([localedir])
m4trace:configure.ac:7: -1- m4_pattern_allow([^localedir$])
m4trace:configure.ac:7: -1- AC_SUBST([mandir], ['${datarootdir}/man'])
m4trace:configure.ac:7: -1- AC_SUBST_TRACE([mandir])
m4trace:configure.ac:7: -1- m4_pattern_allow([^mandir$])
m4trace:configure.ac:7: -1- AC_DEFINE_TRACE_LITERAL([PACKAGE_NAME])
m4trace:configure.ac:7: -1- m4_pattern_allow([^PACKAGE_NAME$])
m4trace:configure.ac:7: -1- AH_OUTPUT([PACKAGE_NAME], [/* Define to the full name of this package. */
@%:@undef PACKAGE_NAME])
m4trace:configure.ac:7: -1- AC_DEFINE_TRACE_LITERAL([PACKAGE_TARNAME])
m4trace:configure.ac:7: -1- m4_pattern_allow([^PACKAGE_TARNAME$])
m4trace:configure.ac:7: -1- AH_OUTPUT([PACKAGE_TARNAME], [/* Define to the one symbol short name of this package. */
@%:@undef PACKAGE_TARNAME])
m4trace:configure.ac:7: -1- AC_DEFINE_TRACE_LITERAL([PACKAGE_VERSION])
m4trace:configure.ac:7: -1- m4_pattern_allow([^PACKAGE_VERSION$])
m4trace:configure.ac:7: -1- AH_OUTPUT([PACKAGE_VERSION], [/* Define to the version of this package. */
@%:@undef PACKAGE_VERSION])
m4trace:configure.ac:7: -1- AC_DEFINE_TRACE_LITERAL([PACKAGE_STRING])
m4trace:configure.ac:7: -1- m4_pattern_allow([^PACKAGE_STRING$])
m4trace:configure.ac:7: -1- AH_OUTPUT([PACKAGE_STRING], [/* Define to the full name and version of this package. */
@%:@undef PACKAGE_STRING])
m4trace:configure.ac:7: -1- AC_DEFINE_TRACE_LITERAL([PACKAGE_BUGREPORT])
m4trace:configure.ac:7: -1- m4_pattern_allow([^PACKAGE_BUGREPORT$])
m4trace:configure.ac:7: -1- AH_OUTPUT([PACKAGE_BUGREPORT], [/* Define to the address where bug reports for this package should be sent. */
@%:@undef PACKAGE_BUGREPORT])
m4trace:configure.ac:7: -1- AC_DEFINE_TRACE_LITERAL([PACKAGE_URL])
m4trace:configure.ac:7: -1- m4_pattern_allow([^PACKAGE_URL$])
m4trace:configure.ac:7: -1- AH_OUTPUT([PACKAGE_URL], [/* Define to the home page for this package. */
@%:@undef PACKAGE_URL])
m4trace:configure.ac:7: -1- AC_SUBST([DEFS])
m4trace:configure.ac:7: -1- AC_SUBST_TRACE([DEFS])
m4trace:configure.ac:7: -1- m4_pattern_allow([^DEFS$])
m4trace:configure.ac:7: -1- AC_SUBST([ECHO_C])
m4trace:configure.ac:7: -1- AC_SUBST_TRACE([ECHO_C])
m4trace:configure.ac:7: -1- m4_pattern_allow([^ECHO_C$])
m4trace:configure.ac:7: -1- AC_SUBST([ECHO_N])
m4trace:configure.ac:7: -1- AC_SUBST_TRACE([ECHO_N])
m4trace:configure.ac:7: -1- m4_pattern_allow([^ECHO_N$])
m4trace:configure.ac:7: -1- AC_SUBST([ECHO_T])
m4trace:configure.ac:7: -1- AC_SUBST_TRACE([ECHO_T])
m4trace:configure.ac:7: -1- m4_pattern_allow([^ECHO_T$])
m4trace:configure.ac:7: -1- AC_SUBST([LIBS])
m4trace:configure.ac:7: -1- AC_SUBST_TRACE([LIBS])
m4trace:configure.ac:7: -1- m4_pattern_allow([^LIBS$])
m4trace:configure.ac:7: -1- AC_SUBST([build_alias])
m4trace:configure.ac:7: -1- AC_SUBST_TRACE([build_alias])
m4trace:configure.ac:7: -1- m4_pattern_allow([^build_alias$])
m4trace:configure.ac:7: -1- AC_SUBST([host_alias])
m4trace:configure.ac:7: -1- AC_SUBST_TRACE([host_alias])
m4trace:configure.ac:7: -1- m4_pattern_allow([^host_alias$])
m4trace:configure.ac:7: -1- AC_SUBST([target_alias])
m4trace:configure.ac:7: -1- AC_SUBST_TRACE([target_alias])
m4trace:configure.ac:7: -1- m4_pattern_allow([^target_alias$])
m4trace:configure.ac:9: -1- AC_CONFIG_MACRO_DIR_TRACE([m4])
m4trace:configure.ac:11: -1- AM_INIT_AUTOMAKE([1.11 tar-ustar no-dist-gzip dist-xz])
m4trace:configure.ac:11: -1- m4_pattern_allow([^AM_[A-Z]+FLAGS$])
m4trace:configure.ac:11: -1- AM_AUTOMAKE_VERSION([1.17])
m4trace:configure.ac:11: -1- AC_REQUIRE_AUX_FILE([install-sh])
m4trace:configure.ac:11: -1- AC_SUBST([INSTALL_PROGRAM])
m4trace:configure.ac:11: -1- AC_SUBST_TRACE([INSTALL_PROGRAM])
m4trace:configure.ac:11: -1- m4_pattern_allow([^INSTALL_PROGRAM$])
m4trace:configure.ac:11: -1- AC_SUBST([INSTALL_SCRIPT])
m4trace:configure.ac:11: -1- AC_SUBST_TRACE([INSTALL_SCRIPT])
m4trace:configure.ac:11: -1- m4_pattern_allow([^INSTALL_SCRIPT$])
m4trace:configure.ac:11: -1- AC_SUBST([INSTALL_DATA])
m4trace:configure.ac:11: -1- AC_SUBST_TRACE([INSTALL_DATA])
m4trace:configure.ac:11: -1- m4_pattern_allow([^INSTALL_DATA$])
m4trace:configure.ac:11: -1- AC_SUBST([am__isrc], [' -I$(srcdir)'])
m4trace:configure.ac:11: -1- AC_SUBST_TRACE([am__isrc])
m4trace:configure.ac:11: -1- m4_pattern_allow([^am__isrc$])
m4trace:configure.ac:11: -1- _AM_SUBST_NOTMAKE([am__isrc])
m4trace:configure.ac:11: -1- AC_SUBST([CYGPATH_W])
m4trace:configure.ac:11: -1- AC_SUBST_TRACE([CYGPATH_W])
m4trace:configure.ac:11: -1- m4_pattern_allow([^CYGPATH_W$])
m4trace:configure.ac:11: -1- AC_SUBST([PACKAGE], ['AC_PACKAGE_TARNAME'])
m4trace:configure.ac:11: -1- AC_SUBST_TRACE([PACKAGE])
m4trace:configure.ac:11: -1- m4_pattern_allow([^PACKAGE$])
m4trace:configure.ac:11: -1- AC_SUBST([VERSION], ['AC_PACKAGE_VERSION'])
m4trace:configure.ac:11: -1- AC_SUBST_TRACE([VERSION])
m4trace:configure.ac:11: -1- m4_pattern_allow([^VERSION$])
m4trace:configure.ac:11: -1- AC_DEFINE_TRACE_LITERAL([PACKAGE])
m4trace:configure.ac:11: -1- m4_pattern_allow([^PACKAGE$])
m4trace:configure.ac:11: -1- AH_OUTPUT([PACKAGE], [/* Name of package */
@%:@undef PACKAGE])
m4trace:configure.ac:11: -1- AC_DEFINE_TRACE_LITERAL([VERSION])
m4trace:configure.ac:11: -1- m4_pattern_allow([^VERSION$])
m4trace:configure.ac:11: -1- AH_OUTPUT([VERSION], [/* Version number of package */
@%:@undef VERSION])
m4trace:configure.ac:11: -1- AC_REQUIRE_AUX_FILE([missing])
m4trace:configure.ac:11: -1- AC_SUBST([ACLOCAL])
m4trace:configure.ac:11: -1- AC_SUBST_TRACE([ACLOCAL])
m4trace:configure.ac:11: -1- m4_pattern_allow([^ACLOCAL$])
m4trace:configure.ac:11: -1- AC_SUBST([AUTOCONF])
m4trace:configure.ac:11: -1- AC_SUBST_TRACE([AUTOCONF])
m4trace:configure.ac:11: -1- m4_pattern_allow([^AUTOCONF$])
m4trace:configure.ac:11: -1- AC_SUBST([AUTOMAKE])
m4trace:configure.ac:11: -1- AC_SUBST_TRACE([AUTOMAKE])
m4trace:configure.ac:11: -1- m4_pattern_allow([^AUTOMAKE$])
m4trace:configure.ac:11: -1- AC_SUBST([AUTOHEADER])
m4trace:configure.ac:11: -1- AC_SUBST_TRACE([AUTOHEADER])
m4trace:configure.ac:11: -1- m4_pattern_allow([^AUTOHEADER$])
m4trace:configure.ac:11: -1- AC_SUBST([MAKEINFO])
m4trace:configure.ac:11: -1- AC_SUBST_TRACE([MAKEINFO])
m4trace:configure.ac:11: -1- m4_pattern_allow([^MAKEINFO$])
m4trace:configure.ac:11: -1- AC_SUBST([install_sh])
m4trace:configure.ac:11: -1- AC_SUBST_TRACE([install_sh])
m4trace:configure.ac:11: -1- m4_pattern_allow([^install_sh$])
m4trace:configure.ac:11: -1- AC_SUBST([STRIP])
m4trace:configure.ac:11: -1- AC_SUBST_TRACE([STRIP])
m4trace:configure.ac:11: -1- m4_pattern_allow([^STRIP$])
m4trace:configure.ac:11: -1- AC_SUBST([INSTALL_STRIP_PROGRAM])
m4trace:configure.ac:11: -1- AC_SUBST_TRACE([INSTALL_STRIP_PROGRAM])
m4trace:configure.ac:11: -1- m4_pattern_allow([^INSTALL_STRIP_PROGRAM$])
m4trace:configure.ac:11: -1- AC_REQUIRE_AUX_FILE([install-sh])
m4trace:configure.ac:11: -1- AC_SUBST([MKDIR_P])
m4trace:configure.ac:11: -1- AC_SUBST_TRACE([MKDIR_P])
m4trace:configure.ac:11: -1- m4_pattern_allow([^MKDIR_P$])
m4trace:configure.ac:11: -1- AC_SUBST([mkdir_p], ['$(MKDIR_P)'])
m4trace:configure.ac:11: -1- AC_SUBST_TRACE([mkdir_p])
m4trace:configure.ac:11: -1- m4_pattern_allow([^mkdir_p$])
m4trace:configure.ac:11: -1- AC_SUBST([AWK])
m4trace:configure.ac:11: -1- AC_SUBST_TRACE([AWK])
m4trace:configure.ac:11: -1- m4_pattern_allow([^AWK$])
m4trace:configure.ac:11: -1- AC_SUBST([SET_MAKE])
m4trace:configure.ac:11: -1- AC_SUBST_TRACE([SET_MAKE])
m4trace:configure.ac:11: -1- m4_pattern_allow([^SET_MAKE$])
m4trace:configure.ac:11: -1- AC_SUBST([am__leading_dot])
m4trace:configure.ac:11: -1- AC_SUBST_TRACE([am__leading_dot])
m4trace:configure.ac:11: -1- m4_pattern_allow([^am__leading_dot$])
m4trace:configure.ac:11: -1- AC_SUBST([AMTAR], ['$${TAR-tar}'])
m4trace:configure.ac:11: -1- AC_SUBST_TRACE([AMTAR])
m4trace:configure.ac:11: -1- m4_pattern_allow([^AMTAR$])
m4trace:configure.ac:11: -1- AC_SUBST([am__tar])
m4trace:configure.ac:11: -1- AC_SUBST_TRACE([am__tar])
m4trace:configure.ac:11: -1- m4_pattern_allow([^am__tar$])
m4trace:configure.ac:11: -1- AC_SUBST([am__untar])
m4trace:configure.ac:11: -1- AC_SUBST_TRACE([am__untar])
m4trace:configure.ac:11: -1- m4_pattern_allow([^am__untar$])
m4trace:configure.ac:11: -1- AC_SUBST([CTAGS])
m4trace:configure.ac:11: -1- AC_SUBST_TRACE([CTAGS])
m4trace:configure.ac:11: -1- m4_pattern_allow([^CTAGS$])
m4trace:configure.ac:11: -1- AC_SUBST([ETAGS])
m4trace:configure.ac:11: -1- AC_SUBST_TRACE([ETAGS])
m4trace:configure.ac:11: -1- m4_pattern_allow([^ETAGS$])
m4trace:configure.ac:11: -1- AC_SUBST([CSCOPE])
m4trace:configure.ac:11: -1- AC_SUBST_TRACE([CSCOPE])
m4trace:configure.ac:11: -1- m4_pattern_allow([^CSCOPE$])
m4trace:configure.ac:11: -1- AC_SUBST([AM_V])
m4trace:configure.ac:11: -1- AC_SUBST_TRACE([AM_V])
m4trace:configure.ac:11: -1- m4_pattern_allow([^AM_V$])
m4trace:configure.ac:11: -1- _AM_SUBST_NOTMAKE([AM_V])
m4trace:configure.ac:11: -1- AC_SUBST([AM_DEFAULT_V])
m4trace:configure.ac:11: -1- AC_SUBST_TRACE([AM_DEFAULT_V])
m4trace:configure.ac:11: -1- m4_pattern_allow([^AM_DEFAULT_V$])
m4trace:configure.ac:11: -1- _AM_SUBST_NOTMAKE([AM_DEFAULT_V])
m4trace:configure.ac:11: -1- AC_SUBST([AM_DEFAULT_VERBOSITY])
m4trace:configure.ac:11: -1- AC_SUBST_TRACE([AM_DEFAULT_VERBOSITY])
m4trace:configure.ac:11: -1- m4_pattern_allow([^AM_DEFAULT_VERBOSITY$])
m4trace:configure.ac:11: -1- AC_SUBST([AM_BACKSLASH])
m4trace:configure.ac:11: -1- AC_SUBST_TRACE([AM_BACKSLASH])
m4trace:configure.ac:11: -1- m4_pattern_allow([^AM_BACKSLASH$])
m4trace:configure.ac:11: -1- _AM_SUBST_NOTMAKE([AM_BACKSLASH])
m4trace:configure.ac:11: -1- AC_SUBST([am__rm_f_notfound])
m4trace:configure.ac:11: -1- AC_SUBST_TRACE([am__rm_f_notfound])
m4trace:configure.ac:11: -1- m4_pattern_allow([^am__rm_f_notfound$])
m4trace:configure.ac:11: -1- AC_SUBST([am__xargs_n])
m4trace:configure.ac:11: -1- AC_SUBST_TRACE([am__xargs_n])
m4trace:configure.ac:11: -1- m4_pattern_allow([^am__xargs_n$])
m4trace:configure.ac:12: -1- AM_MAINTAINER_MODE([enable])
m4trace:configure.ac:12: -1- AM_CONDITIONAL([MAINTAINER_MODE], [test $USE_MAINTAINER_MODE = yes])
m4trace:configure.ac:12: -1- AC_SUBST([MAINTAINER_MODE_TRUE])
m4trace:configure.ac:12: -1- AC_SUBST_TRACE([MAINTAINER_MODE_TRUE])
m4trace:configure.ac:12: -1- m4_pattern_allow([^MAINTAINER_MODE_TRUE$])
m4trace:configure.ac:12: -1- AC_SUBST([MAINTAINER_MODE_FALSE])
m4trace:configure.ac:12: -1- AC_SUBST_TRACE([MAINTAINER_MODE_FALSE])
m4trace:configure.ac:12: -1- m4_pattern_allow([^MAINTAINER_MODE_FALSE$])
m4trace:configure.ac:12: -1- _AM_SUBST_NOTMAKE([MAINTAINER_MODE_TRUE])
m4trace:configure.ac:12: -1- _AM_SUBST_NOTMAKE([MAINTAINER_MODE_FALSE])
m4trace:configure.ac:12: -1- AC_SUBST([MAINT])
m4trace:configure.ac:12: -1- AC_SUBST_TRACE([MAINT])
m4trace:configure.ac:12: -1- m4_pattern_allow([^MAINT$])
m4trace:configure.ac:18: -1- AM_GNU_GETTEXT([external])
m4trace:configure.ac:18: -1- AC_SUBST([SED])
m4trace:configure.ac:18: -1- AC_SUBST_TRACE([SED])
m4trace:configure.ac:18: -1- m4_pattern_allow([^SED$])
m4trace:configure.ac:18: -1- AM_NLS
m4trace:configure.ac:18: -1- AC_SUBST([USE_NLS])
m4trace:configure.ac:18: -1- AC_SUBST_TRACE([USE_NLS])
m4trace:configure.ac:18: -1- m4_pattern_allow([^USE_NLS$])
m4trace:configure.ac:18: -1- AC_SUBST([GETTEXT_MACRO_VERSION], [0.20])
m4trace:configure.ac:18: -1- AC_SUBST_TRACE([GETTEXT_MACRO_VERSION])
m4trace:configure.ac:18: -1- m4_pattern_allow([^GETTEXT_MACRO_VERSION$])
m4trace:configure.ac:18: -1- AC_SUBST([MSGFMT])
m4trace:configure.ac:18: -1- AC_SUBST_TRACE([MSGFMT])
m4trace:configure.ac:18: -1- m4_pattern_allow([^MSGFMT$])
m4trace:configure.ac:18: -1- AC_SUBST([GMSGFMT])
m4trace:configure.ac:18: -1- AC_SUBST_TRACE([GMSGFMT])
m4trace:configure.ac:18: -1- m4_pattern_allow([^GMSGFMT$])
m4trace:configure.ac:18: -1- AC_SUBST([GMSGFMT_015])
m4trace:configure.ac:18: -1- AC_SUBST_TRACE([GMSGFMT_015])
m4trace:configure.ac:18: -1- m4_pattern_allow([^GMSGFMT_015$])
m4trace:configure.ac:18: -1- AC_SUBST([XGETTEXT])
m4trace:configure.ac:18: -1- AC_SUBST_TRACE([XGETTEXT])
m4trace:configure.ac:18: -1- m4_pattern_allow([^XGETTEXT$])
m4trace:configure.ac:18: -1- AC_SUBST([XGETTEXT_015])
m4trace:configure.ac:18: -1- AC_SUBST_TRACE([XGETTEXT_015])
m4trace:configure.ac:18: -1- m4_pattern_allow([^XGETTEXT_015$])
m4trace:configure.ac:18: -1- AC_SUBST([MSGMERGE])
m4trace:configure.ac:18: -1- AC_SUBST_TRACE([MSGMERGE])
m4trace:configure.ac:18: -1- m4_pattern_allow([^MSGMERGE$])
m4trace:configure.ac:18: -1- AC_SUBST([MSGMERGE_FOR_MSGFMT_OPTION])
m4trace:configure.ac:18: -1- AC_SUBST_TRACE([MSGMERGE_FOR_MSGFMT_OPTION])
m4trace:configure.ac:18: -1- m4_pattern_allow([^MSGMERGE_FOR_MSGFMT_OPTION$])
m4trace:configure.ac:18: -1- AC_SUBST([XGETTEXT_EXTRA_OPTIONS])
m4trace:configure.ac:18: -1- AC_SUBST_TRACE([XGETTEXT_EXTRA_OPTIONS])
m4trace:configure.ac:18: -1- m4_pattern_allow([^XGETTEXT_EXTRA_OPTIONS$])
m4trace:configure.ac:18: -1- AC_REQUIRE_AUX_FILE([config.rpath])
m4trace:configure.ac:18: -1- AC_SUBST([CC])
m4trace:configure.ac:18: -1- AC_SUBST_TRACE([CC])
m4trace:configure.ac:18: -1- m4_pattern_allow([^CC$])
m4trace:configure.ac:18: -1- AC_SUBST([CFLAGS])
m4trace:configure.ac:18: -1- AC_SUBST_TRACE([CFLAGS])
m4trace:configure.ac:18: -1- m4_pattern_allow([^CFLAGS$])
m4trace:configure.ac:18: -1- AC_SUBST([LDFLAGS])
m4trace:configure.ac:18: -1- AC_SUBST_TRACE([LDFLAGS])
m4trace:configure.ac:18: -1- m4_pattern_allow([^LDFLAGS$])
m4trace:configure.ac:18: -1- AC_SUBST([LIBS])
m4trace:configure.ac:18: -1- AC_SUBST_TRACE([LIBS])
m4trace:configure.ac:18: -1- m4_pattern_allow([^LIBS$])
m4trace:configure.ac:18: -1- AC_SUBST([CPPFLAGS])
m4trace:configure.ac:18: -1- AC_SUBST_TRACE([CPPFLAGS])
m4trace:configure.ac:18: -1- m4_pattern_allow([^CPPFLAGS$])
m4trace:configure.ac:18: -1- AC_SUBST([CC])
m4trace:configure.ac:18: -1- AC_SUBST_TRACE([CC])
m4trace:configure.ac:18: -1- m4_pattern_allow([^CC$])
m4trace:configure.ac:18: -1- AC_SUBST([CC])
m4trace:configure.ac:18: -1- AC_SUBST_TRACE([CC])
m4trace:configure.ac:18: -1- m4_pattern_allow([^CC$])
m4trace:configure.ac:18: -1- AC_SUBST([CC])
m4trace:configure.ac:18: -1- AC_SUBST_TRACE([CC])
m4trace:configure.ac:18: -1- m4_pattern_allow([^CC$])
m4trace:configure.ac:18: -1- AC_SUBST([CC])
m4trace:configure.ac:18: -1- AC_SUBST_TRACE([CC])
m4trace:configure.ac:18: -1- m4_pattern_allow([^CC$])
m4trace:configure.ac:18: -1- AC_SUBST([ac_ct_CC])
m4trace:configure.ac:18: -1- AC_SUBST_TRACE([ac_ct_CC])
m4trace:configure.ac:18: -1- m4_pattern_allow([^ac_ct_CC$])
m4trace:configure.ac:18: -1- AC_SUBST([CC])
m4trace:configure.ac:18: -1- AC_SUBST_TRACE([CC])
m4trace:configure.ac:18: -1- m4_pattern_allow([^CC$])
m4trace:configure.ac:18: -1- AC_SUBST([EXEEXT], [$ac_cv_exeext])
m4trace:configure.ac:18: -1- AC_SUBST_TRACE([EXEEXT])
m4trace:configure.ac:18: -1- m4_pattern_allow([^EXEEXT$])
m4trace:configure.ac:18: -1- AC_SUBST([OBJEXT], [$ac_cv_objext])
m4trace:configure.ac:18: -1- AC_SUBST_TRACE([OBJEXT])
m4trace:configure.ac:18: -1- m4_pattern_allow([^OBJEXT$])
m4trace:configure.ac:18: -1- AC_REQUIRE_AUX_FILE([compile])
m4trace:configure.ac:18: -1- AC_SUBST([DEPDIR], ["${am__leading_dot}deps"])
m4trace:configure.ac:18: -1- AC_SUBST_TRACE([DEPDIR])
m4trace:configure.ac:18: -1- m4_pattern_allow([^DEPDIR$])
m4trace:configure.ac:18: -1- AC_SUBST([am__include])
m4trace:configure.ac:18: -1- AC_SUBST_TRACE([am__include])
m4trace:configure.ac:18: -1- m4_pattern_allow([^am__include$])
m4trace:configure.ac:18: -1- AM_CONDITIONAL([AMDEP], [test "x$enable_dependency_tracking" != xno])
m4trace:configure.ac:18: -1- AC_SUBST([AMDEP_TRUE])
m4trace:configure.ac:18: -1- AC_SUBST_TRACE([AMDEP_TRUE])
m4trace:configure.ac:18: -1- m4_pattern_allow([^AMDEP_TRUE$])
m4trace:configure.ac:18: -1- AC_SUBST([AMDEP_FALSE])
m4trace:configure.ac:18: -1- AC_SUBST_TRACE([AMDEP_FALSE])
m4trace:configure.ac:18: -1- m4_pattern_allow([^AMDEP_FALSE$])
m4trace:configure.ac:18: -1- _AM_SUBST_NOTMAKE([AMDEP_TRUE])
m4trace:configure.ac:18: -1- _AM_SUBST_NOTMAKE([AMDEP_FALSE])
m4trace:configure.ac:18: -1- AC_SUBST([AMDEPBACKSLASH])
m4trace:configure.ac:18: -1- AC_SUBST_TRACE([AMDEPBACKSLASH])
m4trace:configure.ac:18: -1- m4_pattern_allow([^AMDEPBACKSLASH$])
m4trace:configure.ac:18: -1- _AM_SUBST_NOTMAKE([AMDEPBACKSLASH])
m4trace:configure.ac:18: -1- AC_SUBST([am__nodep])
m4trace:configure.ac:18: -1- AC_SUBST_TRACE([am__nodep])
m4trace:configure.ac:18: -1- m4_pattern_allow([^am__nodep$])
m4trace:configure.ac:18: -1- _AM_SUBST_NOTMAKE([am__nodep])
m4trace:configure.ac:18: -1- AC_SUBST([CCDEPMODE], [depmode=$am_cv_CC_dependencies_compiler_type])
m4trace:configure.ac:18: -1- AC_SUBST_TRACE([CCDEPMODE])
m4trace:configure.ac:18: -1- m4_pattern_allow([^CCDEPMODE$])
m4trace:configure.ac:18: -1- AM_CONDITIONAL([am__fastdepCC], [
test "x$enable_dependency_tracking" != xno \
&& test "$am_cv_CC_dependencies_compiler_type" = gcc3])
m4trace:configure.ac:18: -1- AC_SUBST([am__fastdepCC_TRUE])
m4trace:configure.ac:18: -1- AC_SUBST_TRACE([am__fastdepCC_TRUE])
m4trace:configure.ac:18: -1- m4_pattern_allow([^am__fastdepCC_TRUE$])
m4trace:configure.ac:18: -1- AC_SUBST([am__fastdepCC_FALSE])
m4trace:configure.ac:18: -1- AC_SUBST_TRACE([am__fastdepCC_FALSE])
m4trace:configure.ac:18: -1- m4_pattern_allow([^am__fastdepCC_FALSE$])
m4trace:configure.ac:18: -1- _AM_SUBST_NOTMAKE([am__fastdepCC_TRUE])
m4trace:configure.ac:18: -1- _AM_SUBST_NOTMAKE([am__fastdepCC_FALSE])
m4trace:configure.ac:18: -1- AC_CANONICAL_HOST
m4trace:configure.ac:18: -1- AC_CANONICAL_BUILD
m4trace:configure.ac:18: -1- AC_REQUIRE_AUX_FILE([config.sub])
m4trace:configure.ac:18: -1- AC_REQUIRE_AUX_FILE([config.guess])
m4trace:configure.ac:18: -1- AC_SUBST([build], [$ac_cv_build])
m4trace:configure.ac:18: -1- AC_SUBST_TRACE([build])
m4trace:configure.ac:18: -1- m4_pattern_allow([^build$])
m4trace:configure.ac:18: -1- AC_SUBST([build_cpu], [$[1]])
m4trace:configure.ac:18: -1- AC_SUBST_TRACE([build_cpu])
m4trace:configure.ac:18: -1- m4_pattern_allow([^build_cpu$])
m4trace:configure.ac:18: -1- AC_SUBST([build_vendor], [$[2]])
m4trace:configure.ac:18: -1- AC_SUBST_TRACE([build_vendor])
m4trace:configure.ac:18: -1- m4_pattern_allow([^build_vendor$])
m4trace:configure.ac:18: -1- AC_SUBST([build_os])
m4trace:configure.ac:18: -1- AC_SUBST_TRACE([build_os])
m4trace:configure.ac:18: -1- m4_pattern_allow([^build_os$])
m4trace:configure.ac:18: -1- AC_SUBST([host], [$ac_cv_host])
m4trace:configure.ac:18: -1- AC_SUBST_TRACE([host])
m4trace:configure.ac:18: -1- m4_pattern_allow([^host$])
m4trace:configure.ac:18: -1- AC_SUBST([host_cpu], [$[1]])
m4trace:configure.ac:18: -1- AC_SUBST_TRACE([host_cpu])
m4trace:configure.ac:18: -1- m4_pattern_allow([^host_cpu$])
m4trace:configure.ac:18: -1- AC_SUBST([host_vendor], [$[2]])
m4trace:configure.ac:18: -1- AC_SUBST_TRACE([host_vendor])
m4trace:configure.ac:18: -1- m4_pattern_allow([^host_vendor$])
m4trace:configure.ac:18: -1- AC_SUBST([host_os])
m4trace:configure.ac:18: -1- AC_SUBST_TRACE([host_os])
m4trace:configure.ac:18: -1- m4_pattern_allow([^host_os$])
m4trace:configure.ac:18: -1- AC_SUBST([CPP])
m4trace:configure.ac:18: -1- AC_SUBST_TRACE([CPP])
m4trace:configure.ac:18: -1- m4_pattern_allow([^CPP$])
m4trace:configure.ac:18: -1- AC_SUBST([CPPFLAGS])
m4trace:configure.ac:18: -1- AC_SUBST_TRACE([CPPFLAGS])
m4trace:configure.ac:18: -1- m4_pattern_allow([^CPPFLAGS$])
m4trace:configure.ac:18: -1- AC_SUBST([CPP])
m4trace:configure.ac:18: -1- AC_SUBST_TRACE([CPP])
m4trace:configure.ac:18: -1- m4_pattern_allow([^CPP$])
m4trace:configure.ac:18: -1- AC_DEFINE_TRACE_LITERAL([HAVE_CFPREFERENCESCOPYAPPVALUE])
m4trace:configure.ac:18: -1- m4_pattern_allow([^HAVE_CFPREFERENCESCOPYAPPVALUE$])
m4trace:configure.ac:18: -1- AH_OUTPUT([HAVE_CFPREFERENCESCOPYAPPVALUE], [/* Define to 1 if you have the Mac OS X function CFPreferencesCopyAppValue in
the CoreFoundation framework. */
@%:@undef HAVE_CFPREFERENCESCOPYAPPVALUE])
m4trace:configure.ac:18: -1- AC_DEFINE_TRACE_LITERAL([HAVE_CFLOCALECOPYPREFERREDLANGUAGES])
m4trace:configure.ac:18: -1- m4_pattern_allow([^HAVE_CFLOCALECOPYPREFERREDLANGUAGES$])
m4trace:configure.ac:18: -1- AH_OUTPUT([HAVE_CFLOCALECOPYPREFERREDLANGUAGES], [/* Define to 1 if you have the Mac OS X function
CFLocaleCopyPreferredLanguages in the CoreFoundation framework. */
@%:@undef HAVE_CFLOCALECOPYPREFERREDLANGUAGES])
m4trace:configure.ac:18: -1- AC_SUBST([INTL_MACOSX_LIBS])
m4trace:configure.ac:18: -1- AC_SUBST_TRACE([INTL_MACOSX_LIBS])
m4trace:configure.ac:18: -1- m4_pattern_allow([^INTL_MACOSX_LIBS$])
m4trace:configure.ac:18: -1- AC_DEFINE_TRACE_LITERAL([HAVE_ICONV])
m4trace:configure.ac:18: -1- m4_pattern_allow([^HAVE_ICONV$])
m4trace:configure.ac:18: -1- AH_OUTPUT([HAVE_ICONV], [/* Define if you have the iconv() function and it works. */
@%:@undef HAVE_ICONV])
m4trace:configure.ac:18: -1- AC_SUBST([LIBICONV])
m4trace:configure.ac:18: -1- AC_SUBST_TRACE([LIBICONV])
m4trace:configure.ac:18: -1- m4_pattern_allow([^LIBICONV$])
m4trace:configure.ac:18: -1- AC_SUBST([LTLIBICONV])
m4trace:configure.ac:18: -1- AC_SUBST_TRACE([LTLIBICONV])
m4trace:configure.ac:18: -1- m4_pattern_allow([^LTLIBICONV$])
m4trace:configure.ac:18: -1- AC_DEFINE_TRACE_LITERAL([ENABLE_NLS])
m4trace:configure.ac:18: -1- m4_pattern_allow([^ENABLE_NLS$])
m4trace:configure.ac:18: -1- AH_OUTPUT([ENABLE_NLS], [/* Define to 1 if translation of program messages to the user\'s native
language is requested. */
@%:@undef ENABLE_NLS])
m4trace:configure.ac:18: -1- AC_DEFINE_TRACE_LITERAL([HAVE_GETTEXT])
m4trace:configure.ac:18: -1- m4_pattern_allow([^HAVE_GETTEXT$])
m4trace:configure.ac:18: -1- AH_OUTPUT([HAVE_GETTEXT], [/* Define if the GNU gettext() function is already present or preinstalled. */
@%:@undef HAVE_GETTEXT])
m4trace:configure.ac:18: -1- AC_DEFINE_TRACE_LITERAL([HAVE_DCGETTEXT])
m4trace:configure.ac:18: -1- m4_pattern_allow([^HAVE_DCGETTEXT$])
m4trace:configure.ac:18: -1- AH_OUTPUT([HAVE_DCGETTEXT], [/* Define if the GNU dcgettext() function is already present or preinstalled.
*/
@%:@undef HAVE_DCGETTEXT])
m4trace:configure.ac:18: -1- AC_SUBST([INTLLIBS])
m4trace:configure.ac:18: -1- AC_SUBST_TRACE([INTLLIBS])
m4trace:configure.ac:18: -1- m4_pattern_allow([^INTLLIBS$])
m4trace:configure.ac:18: -1- AC_SUBST([LIBINTL])
m4trace:configure.ac:18: -1- AC_SUBST_TRACE([LIBINTL])
m4trace:configure.ac:18: -1- m4_pattern_allow([^LIBINTL$])
m4trace:configure.ac:18: -1- AC_SUBST([LTLIBINTL])
m4trace:configure.ac:18: -1- AC_SUBST_TRACE([LTLIBINTL])
m4trace:configure.ac:18: -1- m4_pattern_allow([^LTLIBINTL$])
m4trace:configure.ac:18: -1- AC_SUBST([POSUB])
m4trace:configure.ac:18: -1- AC_SUBST_TRACE([POSUB])
m4trace:configure.ac:18: -1- m4_pattern_allow([^POSUB$])
m4trace:configure.ac:18: -1- AC_SUBST([localedir_c])
m4trace:configure.ac:18: -1- AC_SUBST_TRACE([localedir_c])
m4trace:configure.ac:18: -1- m4_pattern_allow([^localedir_c$])
m4trace:configure.ac:18: -1- AC_SUBST([localedir_c_make])
m4trace:configure.ac:18: -1- AC_SUBST_TRACE([localedir_c_make])
m4trace:configure.ac:18: -1- m4_pattern_allow([^localedir_c_make$])
m4trace:configure.ac:21: -1- AC_SUBST([GETTEXT_PACKAGE])
m4trace:configure.ac:21: -1- AC_SUBST_TRACE([GETTEXT_PACKAGE])
m4trace:configure.ac:21: -1- m4_pattern_allow([^GETTEXT_PACKAGE$])
m4trace:configure.ac:22: -1- AC_DEFINE_TRACE_LITERAL([GETTEXT_PACKAGE])
m4trace:configure.ac:22: -1- m4_pattern_allow([^GETTEXT_PACKAGE$])
m4trace:configure.ac:22: -1- AH_OUTPUT([GETTEXT_PACKAGE], [/* gettext package */
@%:@undef GETTEXT_PACKAGE])
m4trace:configure.ac:25: -1- AC_SUBST([LN_S], [$as_ln_s])
m4trace:configure.ac:25: -1- AC_SUBST_TRACE([LN_S])
m4trace:configure.ac:25: -1- m4_pattern_allow([^LN_S$])
m4trace:configure.ac:25: -1- m4_pattern_allow([AM_V_at])
m4trace:configure.ac:25: -1- m4_pattern_allow([AM_V_GEN])
m4trace:configure.ac:25: -1- m4_pattern_allow([AM_DEFAULT_VERBOSITY])
m4trace:configure.ac:25: -1- AC_SUBST([YELP_LC_MEDIA_LINKS])
m4trace:configure.ac:25: -1- AC_SUBST_TRACE([YELP_LC_MEDIA_LINKS])
m4trace:configure.ac:25: -1- m4_pattern_allow([^YELP_LC_MEDIA_LINKS$])
m4trace:configure.ac:25: -1- AC_SUBST([YELP_LC_DIST])
m4trace:configure.ac:25: -1- AC_SUBST_TRACE([YELP_LC_DIST])
m4trace:configure.ac:25: -1- m4_pattern_allow([^YELP_LC_DIST$])
m4trace:configure.ac:25: -1- AC_SUBST([HELP_DIR])
m4trace:configure.ac:25: -1- AC_SUBST_TRACE([HELP_DIR])
m4trace:configure.ac:25: -1- m4_pattern_allow([^HELP_DIR$])
m4trace:configure.ac:25: -1- AC_SUBST([ITSTOOL])
m4trace:configure.ac:25: -1- AC_SUBST_TRACE([ITSTOOL])
m4trace:configure.ac:25: -1- m4_pattern_allow([^ITSTOOL$])
m4trace:configure.ac:25: -1- AC_SUBST([ITSTOOL])
m4trace:configure.ac:25: -1- AC_SUBST_TRACE([ITSTOOL])
m4trace:configure.ac:25: -1- m4_pattern_allow([^ITSTOOL$])
m4trace:configure.ac:25: -1- AC_SUBST([XMLLINT])
m4trace:configure.ac:25: -1- AC_SUBST_TRACE([XMLLINT])
m4trace:configure.ac:25: -1- m4_pattern_allow([^XMLLINT$])
m4trace:configure.ac:25: -1- AC_SUBST([XMLLINT])
m4trace:configure.ac:25: -1- AC_SUBST_TRACE([XMLLINT])
m4trace:configure.ac:25: -1- m4_pattern_allow([^XMLLINT$])
m4trace:configure.ac:25: -1- AC_SUBST([YELP_HELP_RULES])
m4trace:configure.ac:25: -1- AC_SUBST_TRACE([YELP_HELP_RULES])
m4trace:configure.ac:25: -1- m4_pattern_allow([^YELP_HELP_RULES$])
m4trace:configure.ac:25: -1- _AM_SUBST_NOTMAKE([YELP_HELP_RULES])
m4trace:configure.ac:27: -1- m4_pattern_forbid([^_?PKG_[A-Z_]+$])
m4trace:configure.ac:27: -1- m4_pattern_allow([^PKG_CONFIG(_(PATH|LIBDIR|SYSROOT_DIR|ALLOW_SYSTEM_(CFLAGS|LIBS)))?$])
m4trace:configure.ac:27: -1- m4_pattern_allow([^PKG_CONFIG_(DISABLE_UNINSTALLED|TOP_BUILD_DIR|DEBUG_SPEW)$])
m4trace:configure.ac:27: -1- AC_SUBST([PKG_CONFIG])
m4trace:configure.ac:27: -1- AC_SUBST_TRACE([PKG_CONFIG])
m4trace:configure.ac:27: -1- m4_pattern_allow([^PKG_CONFIG$])
m4trace:configure.ac:27: -1- AC_SUBST([PKG_CONFIG_PATH])
m4trace:configure.ac:27: -1- AC_SUBST_TRACE([PKG_CONFIG_PATH])
m4trace:configure.ac:27: -1- m4_pattern_allow([^PKG_CONFIG_PATH$])
m4trace:configure.ac:27: -1- AC_SUBST([PKG_CONFIG_LIBDIR])
m4trace:configure.ac:27: -1- AC_SUBST_TRACE([PKG_CONFIG_LIBDIR])
m4trace:configure.ac:27: -1- m4_pattern_allow([^PKG_CONFIG_LIBDIR$])
m4trace:configure.ac:27: -1- AC_SUBST([PKG_CONFIG])
m4trace:configure.ac:27: -1- AC_SUBST_TRACE([PKG_CONFIG])
m4trace:configure.ac:27: -1- m4_pattern_allow([^PKG_CONFIG$])
m4trace:configure.ac:27: -1- AC_SUBST([PYGOBJECT_CFLAGS])
m4trace:configure.ac:27: -1- AC_SUBST_TRACE([PYGOBJECT_CFLAGS])
m4trace:configure.ac:27: -1- m4_pattern_allow([^PYGOBJECT_CFLAGS$])
m4trace:configure.ac:27: -1- AC_SUBST([PYGOBJECT_LIBS])
m4trace:configure.ac:27: -1- AC_SUBST_TRACE([PYGOBJECT_LIBS])
m4trace:configure.ac:27: -1- m4_pattern_allow([^PYGOBJECT_LIBS$])
m4trace:configure.ac:28: -1- AC_SUBST([ATSPI2_CFLAGS])
m4trace:configure.ac:28: -1- AC_SUBST_TRACE([ATSPI2_CFLAGS])
m4trace:configure.ac:28: -1- m4_pattern_allow([^ATSPI2_CFLAGS$])
m4trace:configure.ac:28: -1- AC_SUBST([ATSPI2_LIBS])
m4trace:configure.ac:28: -1- AC_SUBST_TRACE([ATSPI2_LIBS])
m4trace:configure.ac:28: -1- m4_pattern_allow([^ATSPI2_LIBS$])
m4trace:configure.ac:29: -1- AC_SUBST([ATKBRIDGE_CFLAGS])
m4trace:configure.ac:29: -1- AC_SUBST_TRACE([ATKBRIDGE_CFLAGS])
m4trace:configure.ac:29: -1- m4_pattern_allow([^ATKBRIDGE_CFLAGS$])
m4trace:configure.ac:29: -1- AC_SUBST([ATKBRIDGE_LIBS])
m4trace:configure.ac:29: -1- AC_SUBST_TRACE([ATKBRIDGE_LIBS])
m4trace:configure.ac:29: -1- m4_pattern_allow([^ATKBRIDGE_LIBS$])
m4trace:configure.ac:30: -1- AC_SUBST([GSTREAMER_CFLAGS])
m4trace:configure.ac:30: -1- AC_SUBST_TRACE([GSTREAMER_CFLAGS])
m4trace:configure.ac:30: -1- m4_pattern_allow([^GSTREAMER_CFLAGS$])
m4trace:configure.ac:30: -1- AC_SUBST([GSTREAMER_LIBS])
m4trace:configure.ac:30: -1- AC_SUBST_TRACE([GSTREAMER_LIBS])
m4trace:configure.ac:30: -1- m4_pattern_allow([^GSTREAMER_LIBS$])
m4trace:configure.ac:38: -1- AC_SUBST([PYTHON])
m4trace:configure.ac:38: -1- AC_SUBST_TRACE([PYTHON])
m4trace:configure.ac:38: -1- m4_pattern_allow([^PYTHON$])
m4trace:configure.ac:38: -1- AC_SUBST([PYTHON])
m4trace:configure.ac:38: -1- AC_SUBST_TRACE([PYTHON])
m4trace:configure.ac:38: -1- m4_pattern_allow([^PYTHON$])
m4trace:configure.ac:38: -1- AC_SUBST([PYTHON_VERSION], [$am_cv_python_version])
m4trace:configure.ac:38: -1- AC_SUBST_TRACE([PYTHON_VERSION])
m4trace:configure.ac:38: -1- m4_pattern_allow([^PYTHON_VERSION$])
m4trace:configure.ac:38: -1- AC_SUBST([PYTHON_PLATFORM], [$am_cv_python_platform])
m4trace:configure.ac:38: -1- AC_SUBST_TRACE([PYTHON_PLATFORM])
m4trace:configure.ac:38: -1- m4_pattern_allow([^PYTHON_PLATFORM$])
m4trace:configure.ac:38: -1- AC_SUBST([PYTHON_PREFIX], [$am_python_prefix_subst])
m4trace:configure.ac:38: -1- AC_SUBST_TRACE([PYTHON_PREFIX])
m4trace:configure.ac:38: -1- m4_pattern_allow([^PYTHON_PREFIX$])
m4trace:configure.ac:38: -1- AC_SUBST([PYTHON_EXEC_PREFIX], [$am_python_exec_prefix_subst])
m4trace:configure.ac:38: -1- AC_SUBST_TRACE([PYTHON_EXEC_PREFIX])
m4trace:configure.ac:38: -1- m4_pattern_allow([^PYTHON_EXEC_PREFIX$])
m4trace:configure.ac:38: -1- AC_SUBST([pythondir], [$am_cv_python_pythondir])
m4trace:configure.ac:38: -1- AC_SUBST_TRACE([pythondir])
m4trace:configure.ac:38: -1- m4_pattern_allow([^pythondir$])
m4trace:configure.ac:38: -1- AC_SUBST([pkgpythondir], [\${pythondir}/$PACKAGE])
m4trace:configure.ac:38: -1- AC_SUBST_TRACE([pkgpythondir])
m4trace:configure.ac:38: -1- m4_pattern_allow([^pkgpythondir$])
m4trace:configure.ac:38: -1- AC_SUBST([pyexecdir], [$am_cv_python_pyexecdir])
m4trace:configure.ac:38: -1- AC_SUBST_TRACE([pyexecdir])
m4trace:configure.ac:38: -1- m4_pattern_allow([^pyexecdir$])
m4trace:configure.ac:38: -1- AC_SUBST([pkgpyexecdir], [\${pyexecdir}/$PACKAGE])
m4trace:configure.ac:38: -1- AC_SUBST_TRACE([pkgpyexecdir])
m4trace:configure.ac:38: -1- m4_pattern_allow([^pkgpyexecdir$])
m4trace:configure.ac:43: -1- _m4_warn([obsolete], [The macro 'AC_FD_CC' is obsolete.
You should run autoupdate.], [./lib/autoconf/general.m4:399: AC_FD_CC is expanded from...
lib/m4sugar/m4sh.m4:690: _AS_IF_ELSE is expanded from...
lib/m4sugar/m4sh.m4:697: AS_IF is expanded from...
./lib/autoconf/general.m4:2249: AC_CACHE_VAL is expanded from...
acinclude.m4:28: AM_CHECK_PYMOD is expanded from...
configure.ac:43: the top level])
m4trace:configure.ac:43: -1- _m4_warn([obsolete], [The macro 'AC_FD_CC' is obsolete.
You should run autoupdate.], [./lib/autoconf/general.m4:399: AC_FD_CC is expanded from...
lib/m4sugar/m4sh.m4:690: _AS_IF_ELSE is expanded from...
lib/m4sugar/m4sh.m4:697: AS_IF is expanded from...
./lib/autoconf/general.m4:2249: AC_CACHE_VAL is expanded from...
acinclude.m4:28: AM_CHECK_PYMOD is expanded from...
configure.ac:43: the top level])
m4trace:configure.ac:44: -1- _m4_warn([obsolete], [The macro 'AC_FD_CC' is obsolete.
You should run autoupdate.], [./lib/autoconf/general.m4:399: AC_FD_CC is expanded from...
lib/m4sugar/m4sh.m4:690: _AS_IF_ELSE is expanded from...
lib/m4sugar/m4sh.m4:697: AS_IF is expanded from...
./lib/autoconf/general.m4:2249: AC_CACHE_VAL is expanded from...
acinclude.m4:28: AM_CHECK_PYMOD is expanded from...
configure.ac:44: the top level])
m4trace:configure.ac:44: -1- _m4_warn([obsolete], [The macro 'AC_FD_CC' is obsolete.
You should run autoupdate.], [./lib/autoconf/general.m4:399: AC_FD_CC is expanded from...
lib/m4sugar/m4sh.m4:690: _AS_IF_ELSE is expanded from...
lib/m4sugar/m4sh.m4:697: AS_IF is expanded from...
./lib/autoconf/general.m4:2249: AC_CACHE_VAL is expanded from...
acinclude.m4:28: AM_CHECK_PYMOD is expanded from...
configure.ac:44: the top level])
m4trace:configure.ac:45: -1- _m4_warn([obsolete], [The macro 'AC_FD_CC' is obsolete.
You should run autoupdate.], [./lib/autoconf/general.m4:399: AC_FD_CC is expanded from...
lib/m4sugar/m4sh.m4:690: _AS_IF_ELSE is expanded from...
lib/m4sugar/m4sh.m4:697: AS_IF is expanded from...
./lib/autoconf/general.m4:2249: AC_CACHE_VAL is expanded from...
acinclude.m4:28: AM_CHECK_PYMOD is expanded from...
configure.ac:45: the top level])
m4trace:configure.ac:45: -1- _m4_warn([obsolete], [The macro 'AC_FD_CC' is obsolete.
You should run autoupdate.], [./lib/autoconf/general.m4:399: AC_FD_CC is expanded from...
lib/m4sugar/m4sh.m4:690: _AS_IF_ELSE is expanded from...
lib/m4sugar/m4sh.m4:697: AS_IF is expanded from...
./lib/autoconf/general.m4:2249: AC_CACHE_VAL is expanded from...
acinclude.m4:28: AM_CHECK_PYMOD is expanded from...
configure.ac:45: the top level])
m4trace:configure.ac:46: -1- _m4_warn([obsolete], [The macro 'AC_FD_CC' is obsolete.
You should run autoupdate.], [./lib/autoconf/general.m4:399: AC_FD_CC is expanded from...
lib/m4sugar/m4sh.m4:690: _AS_IF_ELSE is expanded from...
lib/m4sugar/m4sh.m4:697: AS_IF is expanded from...
./lib/autoconf/general.m4:2249: AC_CACHE_VAL is expanded from...
acinclude.m4:28: AM_CHECK_PYMOD is expanded from...
configure.ac:46: the top level])
m4trace:configure.ac:46: -1- _m4_warn([obsolete], [The macro 'AC_FD_CC' is obsolete.
You should run autoupdate.], [./lib/autoconf/general.m4:399: AC_FD_CC is expanded from...
lib/m4sugar/m4sh.m4:690: _AS_IF_ELSE is expanded from...
lib/m4sugar/m4sh.m4:697: AS_IF is expanded from...
./lib/autoconf/general.m4:2249: AC_CACHE_VAL is expanded from...
acinclude.m4:28: AM_CHECK_PYMOD is expanded from...
configure.ac:46: the top level])
m4trace:configure.ac:50: -1- _m4_warn([obsolete], [The macro 'AC_FD_CC' is obsolete.
You should run autoupdate.], [./lib/autoconf/general.m4:399: AC_FD_CC is expanded from...
lib/m4sugar/m4sh.m4:690: _AS_IF_ELSE is expanded from...
lib/m4sugar/m4sh.m4:697: AS_IF is expanded from...
./lib/autoconf/general.m4:2249: AC_CACHE_VAL is expanded from...
acinclude.m4:28: AM_CHECK_PYMOD is expanded from...
lib/m4sugar/m4sh.m4:697: AS_IF is expanded from...
configure.ac:50: the top level])
m4trace:configure.ac:50: -1- _m4_warn([obsolete], [The macro 'AC_FD_CC' is obsolete.
You should run autoupdate.], [./lib/autoconf/general.m4:399: AC_FD_CC is expanded from...
lib/m4sugar/m4sh.m4:690: _AS_IF_ELSE is expanded from...
lib/m4sugar/m4sh.m4:697: AS_IF is expanded from...
./lib/autoconf/general.m4:2249: AC_CACHE_VAL is expanded from...
acinclude.m4:28: AM_CHECK_PYMOD is expanded from...
lib/m4sugar/m4sh.m4:697: AS_IF is expanded from...
configure.ac:50: the top level])
m4trace:configure.ac:62: -1- AC_SUBST([LOUIS_TABLE_DIR])
m4trace:configure.ac:62: -1- AC_SUBST_TRACE([LOUIS_TABLE_DIR])
m4trace:configure.ac:62: -1- m4_pattern_allow([^LOUIS_TABLE_DIR$])
m4trace:configure.ac:65: -1- AC_SUBST([REVISION])
m4trace:configure.ac:65: -1- AC_SUBST_TRACE([REVISION])
m4trace:configure.ac:65: -1- m4_pattern_allow([^REVISION$])
m4trace:configure.ac:77: -1- AC_SUBST([PLATFORM_PATH])
m4trace:configure.ac:77: -1- AC_SUBST_TRACE([PLATFORM_PATH])
m4trace:configure.ac:77: -1- m4_pattern_allow([^PLATFORM_PATH$])
m4trace:configure.ac:79: -1- AC_CONFIG_FILES([
Makefile
docs/Makefile
docs/man/Makefile
po/Makefile.in
help/Makefile
icons/Makefile
src/Makefile
src/orca/Makefile
src/orca/scripts/Makefile
src/orca/scripts/apps/Makefile
src/orca/scripts/apps/Banshee/Makefile
src/orca/scripts/apps/Eclipse/Makefile
src/orca/scripts/apps/epiphany/Makefile
src/orca/scripts/apps/evince/Makefile
src/orca/scripts/apps/evolution/Makefile
src/orca/scripts/apps/gajim/Makefile
src/orca/scripts/apps/gcalctool/Makefile
src/orca/scripts/apps/gedit/Makefile
src/orca/scripts/apps/gnome-documents/Makefile
src/orca/scripts/apps/gnome-shell/Makefile
src/orca/scripts/apps/kwin/Makefile
src/orca/scripts/apps/notification-daemon/Makefile
src/orca/scripts/apps/notify-osd/Makefile
src/orca/scripts/apps/pidgin/Makefile
src/orca/scripts/apps/soffice/Makefile
src/orca/scripts/apps/SeaMonkey/Makefile
src/orca/scripts/apps/smuxi-frontend-gnome/Makefile
src/orca/scripts/apps/Thunderbird/Makefile
src/orca/scripts/apps/xfwm4/Makefile
src/orca/scripts/switcher/Makefile
src/orca/scripts/terminal/Makefile
src/orca/scripts/web/Makefile
src/orca/scripts/toolkits/Makefile
src/orca/scripts/toolkits/Chromium/Makefile
src/orca/scripts/toolkits/Gecko/Makefile
src/orca/scripts/toolkits/J2SE-access-bridge/Makefile
src/orca/scripts/toolkits/clutter/Makefile
src/orca/scripts/toolkits/GAIL/Makefile
src/orca/scripts/toolkits/Qt/Makefile
src/orca/scripts/toolkits/WebKitGtk/Makefile
src/orca/scripts/toolkits/gtk/Makefile
src/orca/backends/Makefile
src/orca/orca_bin.py
src/orca/orca_i18n.py
src/orca/orca_platform.py
])
m4trace:configure.ac:127: -1- AC_SUBST([LIB@&t@OBJS], [$ac_libobjs])
m4trace:configure.ac:127: -1- AC_SUBST_TRACE([LIB@&t@OBJS])
m4trace:configure.ac:127: -1- m4_pattern_allow([^LIB@&t@OBJS$])
m4trace:configure.ac:127: -1- AC_SUBST([LTLIBOBJS], [$ac_ltlibobjs])
m4trace:configure.ac:127: -1- AC_SUBST_TRACE([LTLIBOBJS])
m4trace:configure.ac:127: -1- m4_pattern_allow([^LTLIBOBJS$])
m4trace:configure.ac:127: -1- AM_CONDITIONAL([am__EXEEXT], [test -n "$EXEEXT"])
m4trace:configure.ac:127: -1- AC_SUBST([am__EXEEXT_TRUE])
m4trace:configure.ac:127: -1- AC_SUBST_TRACE([am__EXEEXT_TRUE])
m4trace:configure.ac:127: -1- m4_pattern_allow([^am__EXEEXT_TRUE$])
m4trace:configure.ac:127: -1- AC_SUBST([am__EXEEXT_FALSE])
m4trace:configure.ac:127: -1- AC_SUBST_TRACE([am__EXEEXT_FALSE])
m4trace:configure.ac:127: -1- m4_pattern_allow([^am__EXEEXT_FALSE$])
m4trace:configure.ac:127: -1- _AM_SUBST_NOTMAKE([am__EXEEXT_TRUE])
m4trace:configure.ac:127: -1- _AM_SUBST_NOTMAKE([am__EXEEXT_FALSE])
m4trace:configure.ac:127: -1- AC_SUBST_TRACE([top_builddir])
m4trace:configure.ac:127: -1- AC_SUBST_TRACE([top_build_prefix])
m4trace:configure.ac:127: -1- AC_SUBST_TRACE([srcdir])
m4trace:configure.ac:127: -1- AC_SUBST_TRACE([abs_srcdir])
m4trace:configure.ac:127: -1- AC_SUBST_TRACE([top_srcdir])
m4trace:configure.ac:127: -1- AC_SUBST_TRACE([abs_top_srcdir])
m4trace:configure.ac:127: -1- AC_SUBST_TRACE([builddir])
m4trace:configure.ac:127: -1- AC_SUBST_TRACE([abs_builddir])
m4trace:configure.ac:127: -1- AC_SUBST_TRACE([abs_top_builddir])
m4trace:configure.ac:127: -1- AC_SUBST_TRACE([INSTALL])
m4trace:configure.ac:127: -1- AC_SUBST_TRACE([MKDIR_P])

762
autom4te.cache/traces.4 Normal file
View File

@ -0,0 +1,762 @@
m4trace:aclocal.m4:697: -1- AC_SUBST([am__quote])
m4trace:aclocal.m4:697: -1- AC_SUBST_TRACE([am__quote])
m4trace:aclocal.m4:697: -1- m4_pattern_allow([^am__quote$])
m4trace:aclocal.m4:1714: -1- m4_include([m4/build-to-host.m4])
m4trace:aclocal.m4:1715: -1- m4_include([m4/gettext.m4])
m4trace:aclocal.m4:1716: -1- m4_include([m4/host-cpu-c-abi.m4])
m4trace:aclocal.m4:1717: -1- m4_include([m4/iconv.m4])
m4trace:aclocal.m4:1718: -1- m4_include([m4/intlmacosx.m4])
m4trace:aclocal.m4:1719: -1- m4_include([m4/lib-ld.m4])
m4trace:aclocal.m4:1720: -1- m4_include([m4/lib-link.m4])
m4trace:aclocal.m4:1721: -1- m4_include([m4/lib-prefix.m4])
m4trace:aclocal.m4:1722: -1- m4_include([m4/nls.m4])
m4trace:aclocal.m4:1723: -1- m4_include([m4/pkg.m4])
m4trace:aclocal.m4:1724: -1- m4_include([m4/po.m4])
m4trace:aclocal.m4:1725: -1- m4_include([m4/progtest.m4])
m4trace:aclocal.m4:1726: -1- m4_include([m4/yelp.m4])
m4trace:aclocal.m4:1727: -1- m4_include([acinclude.m4])
m4trace:configure.ac:7: -1- AC_INIT([orca], [orca_version], [https://gitlab.gnome.org/GNOME/orca/-/issues/], [orca])
m4trace:configure.ac:7: -1- m4_pattern_forbid([^_?A[CHUM]_])
m4trace:configure.ac:7: -1- m4_pattern_forbid([_AC_])
m4trace:configure.ac:7: -1- m4_pattern_forbid([^LIBOBJS$], [do not use LIBOBJS directly, use AC_LIBOBJ (see section 'AC_LIBOBJ vs LIBOBJS'])
m4trace:configure.ac:7: -1- m4_pattern_allow([^AS_FLAGS$])
m4trace:configure.ac:7: -1- m4_pattern_forbid([^_?m4_])
m4trace:configure.ac:7: -1- m4_pattern_forbid([^dnl$])
m4trace:configure.ac:7: -1- m4_pattern_forbid([^_?AS_])
m4trace:configure.ac:7: -1- AC_SUBST([SHELL])
m4trace:configure.ac:7: -1- AC_SUBST_TRACE([SHELL])
m4trace:configure.ac:7: -1- m4_pattern_allow([^SHELL$])
m4trace:configure.ac:7: -1- AC_SUBST([PATH_SEPARATOR])
m4trace:configure.ac:7: -1- AC_SUBST_TRACE([PATH_SEPARATOR])
m4trace:configure.ac:7: -1- m4_pattern_allow([^PATH_SEPARATOR$])
m4trace:configure.ac:7: -1- AC_SUBST([PACKAGE_NAME], [m4_ifdef([AC_PACKAGE_NAME], ['AC_PACKAGE_NAME'])])
m4trace:configure.ac:7: -1- AC_SUBST_TRACE([PACKAGE_NAME])
m4trace:configure.ac:7: -1- m4_pattern_allow([^PACKAGE_NAME$])
m4trace:configure.ac:7: -1- AC_SUBST([PACKAGE_TARNAME], [m4_ifdef([AC_PACKAGE_TARNAME], ['AC_PACKAGE_TARNAME'])])
m4trace:configure.ac:7: -1- AC_SUBST_TRACE([PACKAGE_TARNAME])
m4trace:configure.ac:7: -1- m4_pattern_allow([^PACKAGE_TARNAME$])
m4trace:configure.ac:7: -1- AC_SUBST([PACKAGE_VERSION], [m4_ifdef([AC_PACKAGE_VERSION], ['AC_PACKAGE_VERSION'])])
m4trace:configure.ac:7: -1- AC_SUBST_TRACE([PACKAGE_VERSION])
m4trace:configure.ac:7: -1- m4_pattern_allow([^PACKAGE_VERSION$])
m4trace:configure.ac:7: -1- AC_SUBST([PACKAGE_STRING], [m4_ifdef([AC_PACKAGE_STRING], ['AC_PACKAGE_STRING'])])
m4trace:configure.ac:7: -1- AC_SUBST_TRACE([PACKAGE_STRING])
m4trace:configure.ac:7: -1- m4_pattern_allow([^PACKAGE_STRING$])
m4trace:configure.ac:7: -1- AC_SUBST([PACKAGE_BUGREPORT], [m4_ifdef([AC_PACKAGE_BUGREPORT], ['AC_PACKAGE_BUGREPORT'])])
m4trace:configure.ac:7: -1- AC_SUBST_TRACE([PACKAGE_BUGREPORT])
m4trace:configure.ac:7: -1- m4_pattern_allow([^PACKAGE_BUGREPORT$])
m4trace:configure.ac:7: -1- AC_SUBST([PACKAGE_URL], [m4_ifdef([AC_PACKAGE_URL], ['AC_PACKAGE_URL'])])
m4trace:configure.ac:7: -1- AC_SUBST_TRACE([PACKAGE_URL])
m4trace:configure.ac:7: -1- m4_pattern_allow([^PACKAGE_URL$])
m4trace:configure.ac:7: -1- AC_SUBST([exec_prefix], [NONE])
m4trace:configure.ac:7: -1- AC_SUBST_TRACE([exec_prefix])
m4trace:configure.ac:7: -1- m4_pattern_allow([^exec_prefix$])
m4trace:configure.ac:7: -1- AC_SUBST([prefix], [NONE])
m4trace:configure.ac:7: -1- AC_SUBST_TRACE([prefix])
m4trace:configure.ac:7: -1- m4_pattern_allow([^prefix$])
m4trace:configure.ac:7: -1- AC_SUBST([program_transform_name], [s,x,x,])
m4trace:configure.ac:7: -1- AC_SUBST_TRACE([program_transform_name])
m4trace:configure.ac:7: -1- m4_pattern_allow([^program_transform_name$])
m4trace:configure.ac:7: -1- AC_SUBST([bindir], ['${exec_prefix}/bin'])
m4trace:configure.ac:7: -1- AC_SUBST_TRACE([bindir])
m4trace:configure.ac:7: -1- m4_pattern_allow([^bindir$])
m4trace:configure.ac:7: -1- AC_SUBST([sbindir], ['${exec_prefix}/sbin'])
m4trace:configure.ac:7: -1- AC_SUBST_TRACE([sbindir])
m4trace:configure.ac:7: -1- m4_pattern_allow([^sbindir$])
m4trace:configure.ac:7: -1- AC_SUBST([libexecdir], ['${exec_prefix}/libexec'])
m4trace:configure.ac:7: -1- AC_SUBST_TRACE([libexecdir])
m4trace:configure.ac:7: -1- m4_pattern_allow([^libexecdir$])
m4trace:configure.ac:7: -1- AC_SUBST([datarootdir], ['${prefix}/share'])
m4trace:configure.ac:7: -1- AC_SUBST_TRACE([datarootdir])
m4trace:configure.ac:7: -1- m4_pattern_allow([^datarootdir$])
m4trace:configure.ac:7: -1- AC_SUBST([datadir], ['${datarootdir}'])
m4trace:configure.ac:7: -1- AC_SUBST_TRACE([datadir])
m4trace:configure.ac:7: -1- m4_pattern_allow([^datadir$])
m4trace:configure.ac:7: -1- AC_SUBST([sysconfdir], ['${prefix}/etc'])
m4trace:configure.ac:7: -1- AC_SUBST_TRACE([sysconfdir])
m4trace:configure.ac:7: -1- m4_pattern_allow([^sysconfdir$])
m4trace:configure.ac:7: -1- AC_SUBST([sharedstatedir], ['${prefix}/com'])
m4trace:configure.ac:7: -1- AC_SUBST_TRACE([sharedstatedir])
m4trace:configure.ac:7: -1- m4_pattern_allow([^sharedstatedir$])
m4trace:configure.ac:7: -1- AC_SUBST([localstatedir], ['${prefix}/var'])
m4trace:configure.ac:7: -1- AC_SUBST_TRACE([localstatedir])
m4trace:configure.ac:7: -1- m4_pattern_allow([^localstatedir$])
m4trace:configure.ac:7: -1- AC_SUBST([runstatedir], ['${localstatedir}/run'])
m4trace:configure.ac:7: -1- AC_SUBST_TRACE([runstatedir])
m4trace:configure.ac:7: -1- m4_pattern_allow([^runstatedir$])
m4trace:configure.ac:7: -1- AC_SUBST([includedir], ['${prefix}/include'])
m4trace:configure.ac:7: -1- AC_SUBST_TRACE([includedir])
m4trace:configure.ac:7: -1- m4_pattern_allow([^includedir$])
m4trace:configure.ac:7: -1- AC_SUBST([oldincludedir], ['/usr/include'])
m4trace:configure.ac:7: -1- AC_SUBST_TRACE([oldincludedir])
m4trace:configure.ac:7: -1- m4_pattern_allow([^oldincludedir$])
m4trace:configure.ac:7: -1- AC_SUBST([docdir], [m4_ifset([AC_PACKAGE_TARNAME],
['${datarootdir}/doc/${PACKAGE_TARNAME}'],
['${datarootdir}/doc/${PACKAGE}'])])
m4trace:configure.ac:7: -1- AC_SUBST_TRACE([docdir])
m4trace:configure.ac:7: -1- m4_pattern_allow([^docdir$])
m4trace:configure.ac:7: -1- AC_SUBST([infodir], ['${datarootdir}/info'])
m4trace:configure.ac:7: -1- AC_SUBST_TRACE([infodir])
m4trace:configure.ac:7: -1- m4_pattern_allow([^infodir$])
m4trace:configure.ac:7: -1- AC_SUBST([htmldir], ['${docdir}'])
m4trace:configure.ac:7: -1- AC_SUBST_TRACE([htmldir])
m4trace:configure.ac:7: -1- m4_pattern_allow([^htmldir$])
m4trace:configure.ac:7: -1- AC_SUBST([dvidir], ['${docdir}'])
m4trace:configure.ac:7: -1- AC_SUBST_TRACE([dvidir])
m4trace:configure.ac:7: -1- m4_pattern_allow([^dvidir$])
m4trace:configure.ac:7: -1- AC_SUBST([pdfdir], ['${docdir}'])
m4trace:configure.ac:7: -1- AC_SUBST_TRACE([pdfdir])
m4trace:configure.ac:7: -1- m4_pattern_allow([^pdfdir$])
m4trace:configure.ac:7: -1- AC_SUBST([psdir], ['${docdir}'])
m4trace:configure.ac:7: -1- AC_SUBST_TRACE([psdir])
m4trace:configure.ac:7: -1- m4_pattern_allow([^psdir$])
m4trace:configure.ac:7: -1- AC_SUBST([libdir], ['${exec_prefix}/lib'])
m4trace:configure.ac:7: -1- AC_SUBST_TRACE([libdir])
m4trace:configure.ac:7: -1- m4_pattern_allow([^libdir$])
m4trace:configure.ac:7: -1- AC_SUBST([localedir], ['${datarootdir}/locale'])
m4trace:configure.ac:7: -1- AC_SUBST_TRACE([localedir])
m4trace:configure.ac:7: -1- m4_pattern_allow([^localedir$])
m4trace:configure.ac:7: -1- AC_SUBST([mandir], ['${datarootdir}/man'])
m4trace:configure.ac:7: -1- AC_SUBST_TRACE([mandir])
m4trace:configure.ac:7: -1- m4_pattern_allow([^mandir$])
m4trace:configure.ac:7: -1- AC_DEFINE_TRACE_LITERAL([PACKAGE_NAME])
m4trace:configure.ac:7: -1- m4_pattern_allow([^PACKAGE_NAME$])
m4trace:configure.ac:7: -1- AH_OUTPUT([PACKAGE_NAME], [/* Define to the full name of this package. */
@%:@undef PACKAGE_NAME])
m4trace:configure.ac:7: -1- AC_DEFINE_TRACE_LITERAL([PACKAGE_TARNAME])
m4trace:configure.ac:7: -1- m4_pattern_allow([^PACKAGE_TARNAME$])
m4trace:configure.ac:7: -1- AH_OUTPUT([PACKAGE_TARNAME], [/* Define to the one symbol short name of this package. */
@%:@undef PACKAGE_TARNAME])
m4trace:configure.ac:7: -1- AC_DEFINE_TRACE_LITERAL([PACKAGE_VERSION])
m4trace:configure.ac:7: -1- m4_pattern_allow([^PACKAGE_VERSION$])
m4trace:configure.ac:7: -1- AH_OUTPUT([PACKAGE_VERSION], [/* Define to the version of this package. */
@%:@undef PACKAGE_VERSION])
m4trace:configure.ac:7: -1- AC_DEFINE_TRACE_LITERAL([PACKAGE_STRING])
m4trace:configure.ac:7: -1- m4_pattern_allow([^PACKAGE_STRING$])
m4trace:configure.ac:7: -1- AH_OUTPUT([PACKAGE_STRING], [/* Define to the full name and version of this package. */
@%:@undef PACKAGE_STRING])
m4trace:configure.ac:7: -1- AC_DEFINE_TRACE_LITERAL([PACKAGE_BUGREPORT])
m4trace:configure.ac:7: -1- m4_pattern_allow([^PACKAGE_BUGREPORT$])
m4trace:configure.ac:7: -1- AH_OUTPUT([PACKAGE_BUGREPORT], [/* Define to the address where bug reports for this package should be sent. */
@%:@undef PACKAGE_BUGREPORT])
m4trace:configure.ac:7: -1- AC_DEFINE_TRACE_LITERAL([PACKAGE_URL])
m4trace:configure.ac:7: -1- m4_pattern_allow([^PACKAGE_URL$])
m4trace:configure.ac:7: -1- AH_OUTPUT([PACKAGE_URL], [/* Define to the home page for this package. */
@%:@undef PACKAGE_URL])
m4trace:configure.ac:7: -1- AC_SUBST([DEFS])
m4trace:configure.ac:7: -1- AC_SUBST_TRACE([DEFS])
m4trace:configure.ac:7: -1- m4_pattern_allow([^DEFS$])
m4trace:configure.ac:7: -1- AC_SUBST([ECHO_C])
m4trace:configure.ac:7: -1- AC_SUBST_TRACE([ECHO_C])
m4trace:configure.ac:7: -1- m4_pattern_allow([^ECHO_C$])
m4trace:configure.ac:7: -1- AC_SUBST([ECHO_N])
m4trace:configure.ac:7: -1- AC_SUBST_TRACE([ECHO_N])
m4trace:configure.ac:7: -1- m4_pattern_allow([^ECHO_N$])
m4trace:configure.ac:7: -1- AC_SUBST([ECHO_T])
m4trace:configure.ac:7: -1- AC_SUBST_TRACE([ECHO_T])
m4trace:configure.ac:7: -1- m4_pattern_allow([^ECHO_T$])
m4trace:configure.ac:7: -1- AC_SUBST([LIBS])
m4trace:configure.ac:7: -1- AC_SUBST_TRACE([LIBS])
m4trace:configure.ac:7: -1- m4_pattern_allow([^LIBS$])
m4trace:configure.ac:7: -1- AC_SUBST([build_alias])
m4trace:configure.ac:7: -1- AC_SUBST_TRACE([build_alias])
m4trace:configure.ac:7: -1- m4_pattern_allow([^build_alias$])
m4trace:configure.ac:7: -1- AC_SUBST([host_alias])
m4trace:configure.ac:7: -1- AC_SUBST_TRACE([host_alias])
m4trace:configure.ac:7: -1- m4_pattern_allow([^host_alias$])
m4trace:configure.ac:7: -1- AC_SUBST([target_alias])
m4trace:configure.ac:7: -1- AC_SUBST_TRACE([target_alias])
m4trace:configure.ac:7: -1- m4_pattern_allow([^target_alias$])
m4trace:configure.ac:9: -1- AC_CONFIG_MACRO_DIR_TRACE([m4])
m4trace:configure.ac:11: -1- AM_INIT_AUTOMAKE([1.11 tar-ustar no-dist-gzip dist-xz])
m4trace:configure.ac:11: -1- m4_pattern_allow([^AM_[A-Z]+FLAGS$])
m4trace:configure.ac:11: -1- AM_AUTOMAKE_VERSION([1.17])
m4trace:configure.ac:11: -1- AC_REQUIRE_AUX_FILE([install-sh])
m4trace:configure.ac:11: -1- AC_SUBST([INSTALL_PROGRAM])
m4trace:configure.ac:11: -1- AC_SUBST_TRACE([INSTALL_PROGRAM])
m4trace:configure.ac:11: -1- m4_pattern_allow([^INSTALL_PROGRAM$])
m4trace:configure.ac:11: -1- AC_SUBST([INSTALL_SCRIPT])
m4trace:configure.ac:11: -1- AC_SUBST_TRACE([INSTALL_SCRIPT])
m4trace:configure.ac:11: -1- m4_pattern_allow([^INSTALL_SCRIPT$])
m4trace:configure.ac:11: -1- AC_SUBST([INSTALL_DATA])
m4trace:configure.ac:11: -1- AC_SUBST_TRACE([INSTALL_DATA])
m4trace:configure.ac:11: -1- m4_pattern_allow([^INSTALL_DATA$])
m4trace:configure.ac:11: -1- AC_SUBST([am__isrc], [' -I$(srcdir)'])
m4trace:configure.ac:11: -1- AC_SUBST_TRACE([am__isrc])
m4trace:configure.ac:11: -1- m4_pattern_allow([^am__isrc$])
m4trace:configure.ac:11: -1- _AM_SUBST_NOTMAKE([am__isrc])
m4trace:configure.ac:11: -1- AC_SUBST([CYGPATH_W])
m4trace:configure.ac:11: -1- AC_SUBST_TRACE([CYGPATH_W])
m4trace:configure.ac:11: -1- m4_pattern_allow([^CYGPATH_W$])
m4trace:configure.ac:11: -1- AC_SUBST([PACKAGE], ['AC_PACKAGE_TARNAME'])
m4trace:configure.ac:11: -1- AC_SUBST_TRACE([PACKAGE])
m4trace:configure.ac:11: -1- m4_pattern_allow([^PACKAGE$])
m4trace:configure.ac:11: -1- AC_SUBST([VERSION], ['AC_PACKAGE_VERSION'])
m4trace:configure.ac:11: -1- AC_SUBST_TRACE([VERSION])
m4trace:configure.ac:11: -1- m4_pattern_allow([^VERSION$])
m4trace:configure.ac:11: -1- AC_DEFINE_TRACE_LITERAL([PACKAGE])
m4trace:configure.ac:11: -1- m4_pattern_allow([^PACKAGE$])
m4trace:configure.ac:11: -1- AH_OUTPUT([PACKAGE], [/* Name of package */
@%:@undef PACKAGE])
m4trace:configure.ac:11: -1- AC_DEFINE_TRACE_LITERAL([VERSION])
m4trace:configure.ac:11: -1- m4_pattern_allow([^VERSION$])
m4trace:configure.ac:11: -1- AH_OUTPUT([VERSION], [/* Version number of package */
@%:@undef VERSION])
m4trace:configure.ac:11: -1- AC_REQUIRE_AUX_FILE([missing])
m4trace:configure.ac:11: -1- AC_SUBST([ACLOCAL])
m4trace:configure.ac:11: -1- AC_SUBST_TRACE([ACLOCAL])
m4trace:configure.ac:11: -1- m4_pattern_allow([^ACLOCAL$])
m4trace:configure.ac:11: -1- AC_SUBST([AUTOCONF])
m4trace:configure.ac:11: -1- AC_SUBST_TRACE([AUTOCONF])
m4trace:configure.ac:11: -1- m4_pattern_allow([^AUTOCONF$])
m4trace:configure.ac:11: -1- AC_SUBST([AUTOMAKE])
m4trace:configure.ac:11: -1- AC_SUBST_TRACE([AUTOMAKE])
m4trace:configure.ac:11: -1- m4_pattern_allow([^AUTOMAKE$])
m4trace:configure.ac:11: -1- AC_SUBST([AUTOHEADER])
m4trace:configure.ac:11: -1- AC_SUBST_TRACE([AUTOHEADER])
m4trace:configure.ac:11: -1- m4_pattern_allow([^AUTOHEADER$])
m4trace:configure.ac:11: -1- AC_SUBST([MAKEINFO])
m4trace:configure.ac:11: -1- AC_SUBST_TRACE([MAKEINFO])
m4trace:configure.ac:11: -1- m4_pattern_allow([^MAKEINFO$])
m4trace:configure.ac:11: -1- AC_SUBST([install_sh])
m4trace:configure.ac:11: -1- AC_SUBST_TRACE([install_sh])
m4trace:configure.ac:11: -1- m4_pattern_allow([^install_sh$])
m4trace:configure.ac:11: -1- AC_SUBST([STRIP])
m4trace:configure.ac:11: -1- AC_SUBST_TRACE([STRIP])
m4trace:configure.ac:11: -1- m4_pattern_allow([^STRIP$])
m4trace:configure.ac:11: -1- AC_SUBST([INSTALL_STRIP_PROGRAM])
m4trace:configure.ac:11: -1- AC_SUBST_TRACE([INSTALL_STRIP_PROGRAM])
m4trace:configure.ac:11: -1- m4_pattern_allow([^INSTALL_STRIP_PROGRAM$])
m4trace:configure.ac:11: -1- AC_REQUIRE_AUX_FILE([install-sh])
m4trace:configure.ac:11: -1- AC_SUBST([MKDIR_P])
m4trace:configure.ac:11: -1- AC_SUBST_TRACE([MKDIR_P])
m4trace:configure.ac:11: -1- m4_pattern_allow([^MKDIR_P$])
m4trace:configure.ac:11: -1- AC_SUBST([mkdir_p], ['$(MKDIR_P)'])
m4trace:configure.ac:11: -1- AC_SUBST_TRACE([mkdir_p])
m4trace:configure.ac:11: -1- m4_pattern_allow([^mkdir_p$])
m4trace:configure.ac:11: -1- AC_SUBST([AWK])
m4trace:configure.ac:11: -1- AC_SUBST_TRACE([AWK])
m4trace:configure.ac:11: -1- m4_pattern_allow([^AWK$])
m4trace:configure.ac:11: -1- AC_SUBST([SET_MAKE])
m4trace:configure.ac:11: -1- AC_SUBST_TRACE([SET_MAKE])
m4trace:configure.ac:11: -1- m4_pattern_allow([^SET_MAKE$])
m4trace:configure.ac:11: -1- AC_SUBST([am__leading_dot])
m4trace:configure.ac:11: -1- AC_SUBST_TRACE([am__leading_dot])
m4trace:configure.ac:11: -1- m4_pattern_allow([^am__leading_dot$])
m4trace:configure.ac:11: -1- AC_SUBST([AMTAR], ['$${TAR-tar}'])
m4trace:configure.ac:11: -1- AC_SUBST_TRACE([AMTAR])
m4trace:configure.ac:11: -1- m4_pattern_allow([^AMTAR$])
m4trace:configure.ac:11: -1- AC_SUBST([am__tar])
m4trace:configure.ac:11: -1- AC_SUBST_TRACE([am__tar])
m4trace:configure.ac:11: -1- m4_pattern_allow([^am__tar$])
m4trace:configure.ac:11: -1- AC_SUBST([am__untar])
m4trace:configure.ac:11: -1- AC_SUBST_TRACE([am__untar])
m4trace:configure.ac:11: -1- m4_pattern_allow([^am__untar$])
m4trace:configure.ac:11: -1- AC_SUBST([CTAGS])
m4trace:configure.ac:11: -1- AC_SUBST_TRACE([CTAGS])
m4trace:configure.ac:11: -1- m4_pattern_allow([^CTAGS$])
m4trace:configure.ac:11: -1- AC_SUBST([ETAGS])
m4trace:configure.ac:11: -1- AC_SUBST_TRACE([ETAGS])
m4trace:configure.ac:11: -1- m4_pattern_allow([^ETAGS$])
m4trace:configure.ac:11: -1- AC_SUBST([CSCOPE])
m4trace:configure.ac:11: -1- AC_SUBST_TRACE([CSCOPE])
m4trace:configure.ac:11: -1- m4_pattern_allow([^CSCOPE$])
m4trace:configure.ac:11: -1- AC_SUBST([AM_V])
m4trace:configure.ac:11: -1- AC_SUBST_TRACE([AM_V])
m4trace:configure.ac:11: -1- m4_pattern_allow([^AM_V$])
m4trace:configure.ac:11: -1- _AM_SUBST_NOTMAKE([AM_V])
m4trace:configure.ac:11: -1- AC_SUBST([AM_DEFAULT_V])
m4trace:configure.ac:11: -1- AC_SUBST_TRACE([AM_DEFAULT_V])
m4trace:configure.ac:11: -1- m4_pattern_allow([^AM_DEFAULT_V$])
m4trace:configure.ac:11: -1- _AM_SUBST_NOTMAKE([AM_DEFAULT_V])
m4trace:configure.ac:11: -1- AC_SUBST([AM_DEFAULT_VERBOSITY])
m4trace:configure.ac:11: -1- AC_SUBST_TRACE([AM_DEFAULT_VERBOSITY])
m4trace:configure.ac:11: -1- m4_pattern_allow([^AM_DEFAULT_VERBOSITY$])
m4trace:configure.ac:11: -1- AC_SUBST([AM_BACKSLASH])
m4trace:configure.ac:11: -1- AC_SUBST_TRACE([AM_BACKSLASH])
m4trace:configure.ac:11: -1- m4_pattern_allow([^AM_BACKSLASH$])
m4trace:configure.ac:11: -1- _AM_SUBST_NOTMAKE([AM_BACKSLASH])
m4trace:configure.ac:11: -1- AC_SUBST([am__rm_f_notfound])
m4trace:configure.ac:11: -1- AC_SUBST_TRACE([am__rm_f_notfound])
m4trace:configure.ac:11: -1- m4_pattern_allow([^am__rm_f_notfound$])
m4trace:configure.ac:11: -1- AC_SUBST([am__xargs_n])
m4trace:configure.ac:11: -1- AC_SUBST_TRACE([am__xargs_n])
m4trace:configure.ac:11: -1- m4_pattern_allow([^am__xargs_n$])
m4trace:configure.ac:12: -1- AM_MAINTAINER_MODE([enable])
m4trace:configure.ac:12: -1- AM_CONDITIONAL([MAINTAINER_MODE], [test $USE_MAINTAINER_MODE = yes])
m4trace:configure.ac:12: -1- AC_SUBST([MAINTAINER_MODE_TRUE])
m4trace:configure.ac:12: -1- AC_SUBST_TRACE([MAINTAINER_MODE_TRUE])
m4trace:configure.ac:12: -1- m4_pattern_allow([^MAINTAINER_MODE_TRUE$])
m4trace:configure.ac:12: -1- AC_SUBST([MAINTAINER_MODE_FALSE])
m4trace:configure.ac:12: -1- AC_SUBST_TRACE([MAINTAINER_MODE_FALSE])
m4trace:configure.ac:12: -1- m4_pattern_allow([^MAINTAINER_MODE_FALSE$])
m4trace:configure.ac:12: -1- _AM_SUBST_NOTMAKE([MAINTAINER_MODE_TRUE])
m4trace:configure.ac:12: -1- _AM_SUBST_NOTMAKE([MAINTAINER_MODE_FALSE])
m4trace:configure.ac:12: -1- AC_SUBST([MAINT])
m4trace:configure.ac:12: -1- AC_SUBST_TRACE([MAINT])
m4trace:configure.ac:12: -1- m4_pattern_allow([^MAINT$])
m4trace:configure.ac:18: -1- AM_GNU_GETTEXT([external])
m4trace:configure.ac:18: -1- AC_SUBST([SED])
m4trace:configure.ac:18: -1- AC_SUBST_TRACE([SED])
m4trace:configure.ac:18: -1- m4_pattern_allow([^SED$])
m4trace:configure.ac:18: -1- AM_NLS
m4trace:configure.ac:18: -1- AC_SUBST([USE_NLS])
m4trace:configure.ac:18: -1- AC_SUBST_TRACE([USE_NLS])
m4trace:configure.ac:18: -1- m4_pattern_allow([^USE_NLS$])
m4trace:configure.ac:18: -1- AC_SUBST([GETTEXT_MACRO_VERSION], [0.20])
m4trace:configure.ac:18: -1- AC_SUBST_TRACE([GETTEXT_MACRO_VERSION])
m4trace:configure.ac:18: -1- m4_pattern_allow([^GETTEXT_MACRO_VERSION$])
m4trace:configure.ac:18: -1- AC_SUBST([MSGFMT])
m4trace:configure.ac:18: -1- AC_SUBST_TRACE([MSGFMT])
m4trace:configure.ac:18: -1- m4_pattern_allow([^MSGFMT$])
m4trace:configure.ac:18: -1- AC_SUBST([GMSGFMT])
m4trace:configure.ac:18: -1- AC_SUBST_TRACE([GMSGFMT])
m4trace:configure.ac:18: -1- m4_pattern_allow([^GMSGFMT$])
m4trace:configure.ac:18: -1- AC_SUBST([GMSGFMT_015])
m4trace:configure.ac:18: -1- AC_SUBST_TRACE([GMSGFMT_015])
m4trace:configure.ac:18: -1- m4_pattern_allow([^GMSGFMT_015$])
m4trace:configure.ac:18: -1- AC_SUBST([XGETTEXT])
m4trace:configure.ac:18: -1- AC_SUBST_TRACE([XGETTEXT])
m4trace:configure.ac:18: -1- m4_pattern_allow([^XGETTEXT$])
m4trace:configure.ac:18: -1- AC_SUBST([XGETTEXT_015])
m4trace:configure.ac:18: -1- AC_SUBST_TRACE([XGETTEXT_015])
m4trace:configure.ac:18: -1- m4_pattern_allow([^XGETTEXT_015$])
m4trace:configure.ac:18: -1- AC_SUBST([MSGMERGE])
m4trace:configure.ac:18: -1- AC_SUBST_TRACE([MSGMERGE])
m4trace:configure.ac:18: -1- m4_pattern_allow([^MSGMERGE$])
m4trace:configure.ac:18: -1- AC_SUBST([MSGMERGE_FOR_MSGFMT_OPTION])
m4trace:configure.ac:18: -1- AC_SUBST_TRACE([MSGMERGE_FOR_MSGFMT_OPTION])
m4trace:configure.ac:18: -1- m4_pattern_allow([^MSGMERGE_FOR_MSGFMT_OPTION$])
m4trace:configure.ac:18: -1- AC_SUBST([XGETTEXT_EXTRA_OPTIONS])
m4trace:configure.ac:18: -1- AC_SUBST_TRACE([XGETTEXT_EXTRA_OPTIONS])
m4trace:configure.ac:18: -1- m4_pattern_allow([^XGETTEXT_EXTRA_OPTIONS$])
m4trace:configure.ac:18: -1- AC_REQUIRE_AUX_FILE([config.rpath])
m4trace:configure.ac:18: -1- AC_SUBST([CC])
m4trace:configure.ac:18: -1- AC_SUBST_TRACE([CC])
m4trace:configure.ac:18: -1- m4_pattern_allow([^CC$])
m4trace:configure.ac:18: -1- AC_SUBST([CFLAGS])
m4trace:configure.ac:18: -1- AC_SUBST_TRACE([CFLAGS])
m4trace:configure.ac:18: -1- m4_pattern_allow([^CFLAGS$])
m4trace:configure.ac:18: -1- AC_SUBST([LDFLAGS])
m4trace:configure.ac:18: -1- AC_SUBST_TRACE([LDFLAGS])
m4trace:configure.ac:18: -1- m4_pattern_allow([^LDFLAGS$])
m4trace:configure.ac:18: -1- AC_SUBST([LIBS])
m4trace:configure.ac:18: -1- AC_SUBST_TRACE([LIBS])
m4trace:configure.ac:18: -1- m4_pattern_allow([^LIBS$])
m4trace:configure.ac:18: -1- AC_SUBST([CPPFLAGS])
m4trace:configure.ac:18: -1- AC_SUBST_TRACE([CPPFLAGS])
m4trace:configure.ac:18: -1- m4_pattern_allow([^CPPFLAGS$])
m4trace:configure.ac:18: -1- AC_SUBST([CC])
m4trace:configure.ac:18: -1- AC_SUBST_TRACE([CC])
m4trace:configure.ac:18: -1- m4_pattern_allow([^CC$])
m4trace:configure.ac:18: -1- AC_SUBST([CC])
m4trace:configure.ac:18: -1- AC_SUBST_TRACE([CC])
m4trace:configure.ac:18: -1- m4_pattern_allow([^CC$])
m4trace:configure.ac:18: -1- AC_SUBST([CC])
m4trace:configure.ac:18: -1- AC_SUBST_TRACE([CC])
m4trace:configure.ac:18: -1- m4_pattern_allow([^CC$])
m4trace:configure.ac:18: -1- AC_SUBST([CC])
m4trace:configure.ac:18: -1- AC_SUBST_TRACE([CC])
m4trace:configure.ac:18: -1- m4_pattern_allow([^CC$])
m4trace:configure.ac:18: -1- AC_SUBST([ac_ct_CC])
m4trace:configure.ac:18: -1- AC_SUBST_TRACE([ac_ct_CC])
m4trace:configure.ac:18: -1- m4_pattern_allow([^ac_ct_CC$])
m4trace:configure.ac:18: -1- AC_SUBST([CC])
m4trace:configure.ac:18: -1- AC_SUBST_TRACE([CC])
m4trace:configure.ac:18: -1- m4_pattern_allow([^CC$])
m4trace:configure.ac:18: -1- AC_SUBST([EXEEXT], [$ac_cv_exeext])
m4trace:configure.ac:18: -1- AC_SUBST_TRACE([EXEEXT])
m4trace:configure.ac:18: -1- m4_pattern_allow([^EXEEXT$])
m4trace:configure.ac:18: -1- AC_SUBST([OBJEXT], [$ac_cv_objext])
m4trace:configure.ac:18: -1- AC_SUBST_TRACE([OBJEXT])
m4trace:configure.ac:18: -1- m4_pattern_allow([^OBJEXT$])
m4trace:configure.ac:18: -1- AC_REQUIRE_AUX_FILE([compile])
m4trace:configure.ac:18: -1- AC_SUBST([DEPDIR], ["${am__leading_dot}deps"])
m4trace:configure.ac:18: -1- AC_SUBST_TRACE([DEPDIR])
m4trace:configure.ac:18: -1- m4_pattern_allow([^DEPDIR$])
m4trace:configure.ac:18: -1- AC_SUBST([am__include])
m4trace:configure.ac:18: -1- AC_SUBST_TRACE([am__include])
m4trace:configure.ac:18: -1- m4_pattern_allow([^am__include$])
m4trace:configure.ac:18: -1- AM_CONDITIONAL([AMDEP], [test "x$enable_dependency_tracking" != xno])
m4trace:configure.ac:18: -1- AC_SUBST([AMDEP_TRUE])
m4trace:configure.ac:18: -1- AC_SUBST_TRACE([AMDEP_TRUE])
m4trace:configure.ac:18: -1- m4_pattern_allow([^AMDEP_TRUE$])
m4trace:configure.ac:18: -1- AC_SUBST([AMDEP_FALSE])
m4trace:configure.ac:18: -1- AC_SUBST_TRACE([AMDEP_FALSE])
m4trace:configure.ac:18: -1- m4_pattern_allow([^AMDEP_FALSE$])
m4trace:configure.ac:18: -1- _AM_SUBST_NOTMAKE([AMDEP_TRUE])
m4trace:configure.ac:18: -1- _AM_SUBST_NOTMAKE([AMDEP_FALSE])
m4trace:configure.ac:18: -1- AC_SUBST([AMDEPBACKSLASH])
m4trace:configure.ac:18: -1- AC_SUBST_TRACE([AMDEPBACKSLASH])
m4trace:configure.ac:18: -1- m4_pattern_allow([^AMDEPBACKSLASH$])
m4trace:configure.ac:18: -1- _AM_SUBST_NOTMAKE([AMDEPBACKSLASH])
m4trace:configure.ac:18: -1- AC_SUBST([am__nodep])
m4trace:configure.ac:18: -1- AC_SUBST_TRACE([am__nodep])
m4trace:configure.ac:18: -1- m4_pattern_allow([^am__nodep$])
m4trace:configure.ac:18: -1- _AM_SUBST_NOTMAKE([am__nodep])
m4trace:configure.ac:18: -1- AC_SUBST([CCDEPMODE], [depmode=$am_cv_CC_dependencies_compiler_type])
m4trace:configure.ac:18: -1- AC_SUBST_TRACE([CCDEPMODE])
m4trace:configure.ac:18: -1- m4_pattern_allow([^CCDEPMODE$])
m4trace:configure.ac:18: -1- AM_CONDITIONAL([am__fastdepCC], [
test "x$enable_dependency_tracking" != xno \
&& test "$am_cv_CC_dependencies_compiler_type" = gcc3])
m4trace:configure.ac:18: -1- AC_SUBST([am__fastdepCC_TRUE])
m4trace:configure.ac:18: -1- AC_SUBST_TRACE([am__fastdepCC_TRUE])
m4trace:configure.ac:18: -1- m4_pattern_allow([^am__fastdepCC_TRUE$])
m4trace:configure.ac:18: -1- AC_SUBST([am__fastdepCC_FALSE])
m4trace:configure.ac:18: -1- AC_SUBST_TRACE([am__fastdepCC_FALSE])
m4trace:configure.ac:18: -1- m4_pattern_allow([^am__fastdepCC_FALSE$])
m4trace:configure.ac:18: -1- _AM_SUBST_NOTMAKE([am__fastdepCC_TRUE])
m4trace:configure.ac:18: -1- _AM_SUBST_NOTMAKE([am__fastdepCC_FALSE])
m4trace:configure.ac:18: -1- AC_CANONICAL_HOST
m4trace:configure.ac:18: -1- AC_CANONICAL_BUILD
m4trace:configure.ac:18: -1- AC_REQUIRE_AUX_FILE([config.sub])
m4trace:configure.ac:18: -1- AC_REQUIRE_AUX_FILE([config.guess])
m4trace:configure.ac:18: -1- AC_SUBST([build], [$ac_cv_build])
m4trace:configure.ac:18: -1- AC_SUBST_TRACE([build])
m4trace:configure.ac:18: -1- m4_pattern_allow([^build$])
m4trace:configure.ac:18: -1- AC_SUBST([build_cpu], [$[1]])
m4trace:configure.ac:18: -1- AC_SUBST_TRACE([build_cpu])
m4trace:configure.ac:18: -1- m4_pattern_allow([^build_cpu$])
m4trace:configure.ac:18: -1- AC_SUBST([build_vendor], [$[2]])
m4trace:configure.ac:18: -1- AC_SUBST_TRACE([build_vendor])
m4trace:configure.ac:18: -1- m4_pattern_allow([^build_vendor$])
m4trace:configure.ac:18: -1- AC_SUBST([build_os])
m4trace:configure.ac:18: -1- AC_SUBST_TRACE([build_os])
m4trace:configure.ac:18: -1- m4_pattern_allow([^build_os$])
m4trace:configure.ac:18: -1- AC_SUBST([host], [$ac_cv_host])
m4trace:configure.ac:18: -1- AC_SUBST_TRACE([host])
m4trace:configure.ac:18: -1- m4_pattern_allow([^host$])
m4trace:configure.ac:18: -1- AC_SUBST([host_cpu], [$[1]])
m4trace:configure.ac:18: -1- AC_SUBST_TRACE([host_cpu])
m4trace:configure.ac:18: -1- m4_pattern_allow([^host_cpu$])
m4trace:configure.ac:18: -1- AC_SUBST([host_vendor], [$[2]])
m4trace:configure.ac:18: -1- AC_SUBST_TRACE([host_vendor])
m4trace:configure.ac:18: -1- m4_pattern_allow([^host_vendor$])
m4trace:configure.ac:18: -1- AC_SUBST([host_os])
m4trace:configure.ac:18: -1- AC_SUBST_TRACE([host_os])
m4trace:configure.ac:18: -1- m4_pattern_allow([^host_os$])
m4trace:configure.ac:18: -1- AC_SUBST([CPP])
m4trace:configure.ac:18: -1- AC_SUBST_TRACE([CPP])
m4trace:configure.ac:18: -1- m4_pattern_allow([^CPP$])
m4trace:configure.ac:18: -1- AC_SUBST([CPPFLAGS])
m4trace:configure.ac:18: -1- AC_SUBST_TRACE([CPPFLAGS])
m4trace:configure.ac:18: -1- m4_pattern_allow([^CPPFLAGS$])
m4trace:configure.ac:18: -1- AC_SUBST([CPP])
m4trace:configure.ac:18: -1- AC_SUBST_TRACE([CPP])
m4trace:configure.ac:18: -1- m4_pattern_allow([^CPP$])
m4trace:configure.ac:18: -1- AC_DEFINE_TRACE_LITERAL([HAVE_CFPREFERENCESCOPYAPPVALUE])
m4trace:configure.ac:18: -1- m4_pattern_allow([^HAVE_CFPREFERENCESCOPYAPPVALUE$])
m4trace:configure.ac:18: -1- AH_OUTPUT([HAVE_CFPREFERENCESCOPYAPPVALUE], [/* Define to 1 if you have the Mac OS X function CFPreferencesCopyAppValue in
the CoreFoundation framework. */
@%:@undef HAVE_CFPREFERENCESCOPYAPPVALUE])
m4trace:configure.ac:18: -1- AC_DEFINE_TRACE_LITERAL([HAVE_CFLOCALECOPYPREFERREDLANGUAGES])
m4trace:configure.ac:18: -1- m4_pattern_allow([^HAVE_CFLOCALECOPYPREFERREDLANGUAGES$])
m4trace:configure.ac:18: -1- AH_OUTPUT([HAVE_CFLOCALECOPYPREFERREDLANGUAGES], [/* Define to 1 if you have the Mac OS X function
CFLocaleCopyPreferredLanguages in the CoreFoundation framework. */
@%:@undef HAVE_CFLOCALECOPYPREFERREDLANGUAGES])
m4trace:configure.ac:18: -1- AC_SUBST([INTL_MACOSX_LIBS])
m4trace:configure.ac:18: -1- AC_SUBST_TRACE([INTL_MACOSX_LIBS])
m4trace:configure.ac:18: -1- m4_pattern_allow([^INTL_MACOSX_LIBS$])
m4trace:configure.ac:18: -1- AC_DEFINE_TRACE_LITERAL([HAVE_ICONV])
m4trace:configure.ac:18: -1- m4_pattern_allow([^HAVE_ICONV$])
m4trace:configure.ac:18: -1- AH_OUTPUT([HAVE_ICONV], [/* Define if you have the iconv() function and it works. */
@%:@undef HAVE_ICONV])
m4trace:configure.ac:18: -1- AC_SUBST([LIBICONV])
m4trace:configure.ac:18: -1- AC_SUBST_TRACE([LIBICONV])
m4trace:configure.ac:18: -1- m4_pattern_allow([^LIBICONV$])
m4trace:configure.ac:18: -1- AC_SUBST([LTLIBICONV])
m4trace:configure.ac:18: -1- AC_SUBST_TRACE([LTLIBICONV])
m4trace:configure.ac:18: -1- m4_pattern_allow([^LTLIBICONV$])
m4trace:configure.ac:18: -1- AC_DEFINE_TRACE_LITERAL([ENABLE_NLS])
m4trace:configure.ac:18: -1- m4_pattern_allow([^ENABLE_NLS$])
m4trace:configure.ac:18: -1- AH_OUTPUT([ENABLE_NLS], [/* Define to 1 if translation of program messages to the user\'s native
language is requested. */
@%:@undef ENABLE_NLS])
m4trace:configure.ac:18: -1- AC_DEFINE_TRACE_LITERAL([HAVE_GETTEXT])
m4trace:configure.ac:18: -1- m4_pattern_allow([^HAVE_GETTEXT$])
m4trace:configure.ac:18: -1- AH_OUTPUT([HAVE_GETTEXT], [/* Define if the GNU gettext() function is already present or preinstalled. */
@%:@undef HAVE_GETTEXT])
m4trace:configure.ac:18: -1- AC_DEFINE_TRACE_LITERAL([HAVE_DCGETTEXT])
m4trace:configure.ac:18: -1- m4_pattern_allow([^HAVE_DCGETTEXT$])
m4trace:configure.ac:18: -1- AH_OUTPUT([HAVE_DCGETTEXT], [/* Define if the GNU dcgettext() function is already present or preinstalled.
*/
@%:@undef HAVE_DCGETTEXT])
m4trace:configure.ac:18: -1- AC_SUBST([INTLLIBS])
m4trace:configure.ac:18: -1- AC_SUBST_TRACE([INTLLIBS])
m4trace:configure.ac:18: -1- m4_pattern_allow([^INTLLIBS$])
m4trace:configure.ac:18: -1- AC_SUBST([LIBINTL])
m4trace:configure.ac:18: -1- AC_SUBST_TRACE([LIBINTL])
m4trace:configure.ac:18: -1- m4_pattern_allow([^LIBINTL$])
m4trace:configure.ac:18: -1- AC_SUBST([LTLIBINTL])
m4trace:configure.ac:18: -1- AC_SUBST_TRACE([LTLIBINTL])
m4trace:configure.ac:18: -1- m4_pattern_allow([^LTLIBINTL$])
m4trace:configure.ac:18: -1- AC_SUBST([POSUB])
m4trace:configure.ac:18: -1- AC_SUBST_TRACE([POSUB])
m4trace:configure.ac:18: -1- m4_pattern_allow([^POSUB$])
m4trace:configure.ac:18: -1- AC_SUBST([localedir_c])
m4trace:configure.ac:18: -1- AC_SUBST_TRACE([localedir_c])
m4trace:configure.ac:18: -1- m4_pattern_allow([^localedir_c$])
m4trace:configure.ac:18: -1- AC_SUBST([localedir_c_make])
m4trace:configure.ac:18: -1- AC_SUBST_TRACE([localedir_c_make])
m4trace:configure.ac:18: -1- m4_pattern_allow([^localedir_c_make$])
m4trace:configure.ac:21: -1- AC_SUBST([GETTEXT_PACKAGE])
m4trace:configure.ac:21: -1- AC_SUBST_TRACE([GETTEXT_PACKAGE])
m4trace:configure.ac:21: -1- m4_pattern_allow([^GETTEXT_PACKAGE$])
m4trace:configure.ac:22: -1- AC_DEFINE_TRACE_LITERAL([GETTEXT_PACKAGE])
m4trace:configure.ac:22: -1- m4_pattern_allow([^GETTEXT_PACKAGE$])
m4trace:configure.ac:22: -1- AH_OUTPUT([GETTEXT_PACKAGE], [/* gettext package */
@%:@undef GETTEXT_PACKAGE])
m4trace:configure.ac:25: -1- AC_SUBST([LN_S], [$as_ln_s])
m4trace:configure.ac:25: -1- AC_SUBST_TRACE([LN_S])
m4trace:configure.ac:25: -1- m4_pattern_allow([^LN_S$])
m4trace:configure.ac:25: -1- m4_pattern_allow([AM_V_at])
m4trace:configure.ac:25: -1- m4_pattern_allow([AM_V_GEN])
m4trace:configure.ac:25: -1- m4_pattern_allow([AM_DEFAULT_VERBOSITY])
m4trace:configure.ac:25: -1- AC_SUBST([YELP_LC_MEDIA_LINKS])
m4trace:configure.ac:25: -1- AC_SUBST_TRACE([YELP_LC_MEDIA_LINKS])
m4trace:configure.ac:25: -1- m4_pattern_allow([^YELP_LC_MEDIA_LINKS$])
m4trace:configure.ac:25: -1- AC_SUBST([YELP_LC_DIST])
m4trace:configure.ac:25: -1- AC_SUBST_TRACE([YELP_LC_DIST])
m4trace:configure.ac:25: -1- m4_pattern_allow([^YELP_LC_DIST$])
m4trace:configure.ac:25: -1- AC_SUBST([HELP_DIR])
m4trace:configure.ac:25: -1- AC_SUBST_TRACE([HELP_DIR])
m4trace:configure.ac:25: -1- m4_pattern_allow([^HELP_DIR$])
m4trace:configure.ac:25: -1- AC_SUBST([ITSTOOL])
m4trace:configure.ac:25: -1- AC_SUBST_TRACE([ITSTOOL])
m4trace:configure.ac:25: -1- m4_pattern_allow([^ITSTOOL$])
m4trace:configure.ac:25: -1- AC_SUBST([ITSTOOL])
m4trace:configure.ac:25: -1- AC_SUBST_TRACE([ITSTOOL])
m4trace:configure.ac:25: -1- m4_pattern_allow([^ITSTOOL$])
m4trace:configure.ac:25: -1- AC_SUBST([XMLLINT])
m4trace:configure.ac:25: -1- AC_SUBST_TRACE([XMLLINT])
m4trace:configure.ac:25: -1- m4_pattern_allow([^XMLLINT$])
m4trace:configure.ac:25: -1- AC_SUBST([XMLLINT])
m4trace:configure.ac:25: -1- AC_SUBST_TRACE([XMLLINT])
m4trace:configure.ac:25: -1- m4_pattern_allow([^XMLLINT$])
m4trace:configure.ac:25: -1- AC_SUBST([YELP_HELP_RULES])
m4trace:configure.ac:25: -1- AC_SUBST_TRACE([YELP_HELP_RULES])
m4trace:configure.ac:25: -1- m4_pattern_allow([^YELP_HELP_RULES$])
m4trace:configure.ac:25: -1- _AM_SUBST_NOTMAKE([YELP_HELP_RULES])
m4trace:configure.ac:27: -1- m4_pattern_forbid([^_?PKG_[A-Z_]+$])
m4trace:configure.ac:27: -1- m4_pattern_allow([^PKG_CONFIG(_(PATH|LIBDIR|SYSROOT_DIR|ALLOW_SYSTEM_(CFLAGS|LIBS)))?$])
m4trace:configure.ac:27: -1- m4_pattern_allow([^PKG_CONFIG_(DISABLE_UNINSTALLED|TOP_BUILD_DIR|DEBUG_SPEW)$])
m4trace:configure.ac:27: -1- AC_SUBST([PKG_CONFIG])
m4trace:configure.ac:27: -1- AC_SUBST_TRACE([PKG_CONFIG])
m4trace:configure.ac:27: -1- m4_pattern_allow([^PKG_CONFIG$])
m4trace:configure.ac:27: -1- AC_SUBST([PKG_CONFIG_PATH])
m4trace:configure.ac:27: -1- AC_SUBST_TRACE([PKG_CONFIG_PATH])
m4trace:configure.ac:27: -1- m4_pattern_allow([^PKG_CONFIG_PATH$])
m4trace:configure.ac:27: -1- AC_SUBST([PKG_CONFIG_LIBDIR])
m4trace:configure.ac:27: -1- AC_SUBST_TRACE([PKG_CONFIG_LIBDIR])
m4trace:configure.ac:27: -1- m4_pattern_allow([^PKG_CONFIG_LIBDIR$])
m4trace:configure.ac:27: -1- AC_SUBST([PKG_CONFIG])
m4trace:configure.ac:27: -1- AC_SUBST_TRACE([PKG_CONFIG])
m4trace:configure.ac:27: -1- m4_pattern_allow([^PKG_CONFIG$])
m4trace:configure.ac:27: -1- AC_SUBST([PYGOBJECT_CFLAGS])
m4trace:configure.ac:27: -1- AC_SUBST_TRACE([PYGOBJECT_CFLAGS])
m4trace:configure.ac:27: -1- m4_pattern_allow([^PYGOBJECT_CFLAGS$])
m4trace:configure.ac:27: -1- AC_SUBST([PYGOBJECT_LIBS])
m4trace:configure.ac:27: -1- AC_SUBST_TRACE([PYGOBJECT_LIBS])
m4trace:configure.ac:27: -1- m4_pattern_allow([^PYGOBJECT_LIBS$])
m4trace:configure.ac:28: -1- AC_SUBST([ATSPI2_CFLAGS])
m4trace:configure.ac:28: -1- AC_SUBST_TRACE([ATSPI2_CFLAGS])
m4trace:configure.ac:28: -1- m4_pattern_allow([^ATSPI2_CFLAGS$])
m4trace:configure.ac:28: -1- AC_SUBST([ATSPI2_LIBS])
m4trace:configure.ac:28: -1- AC_SUBST_TRACE([ATSPI2_LIBS])
m4trace:configure.ac:28: -1- m4_pattern_allow([^ATSPI2_LIBS$])
m4trace:configure.ac:29: -1- AC_SUBST([ATKBRIDGE_CFLAGS])
m4trace:configure.ac:29: -1- AC_SUBST_TRACE([ATKBRIDGE_CFLAGS])
m4trace:configure.ac:29: -1- m4_pattern_allow([^ATKBRIDGE_CFLAGS$])
m4trace:configure.ac:29: -1- AC_SUBST([ATKBRIDGE_LIBS])
m4trace:configure.ac:29: -1- AC_SUBST_TRACE([ATKBRIDGE_LIBS])
m4trace:configure.ac:29: -1- m4_pattern_allow([^ATKBRIDGE_LIBS$])
m4trace:configure.ac:30: -1- AC_SUBST([GSTREAMER_CFLAGS])
m4trace:configure.ac:30: -1- AC_SUBST_TRACE([GSTREAMER_CFLAGS])
m4trace:configure.ac:30: -1- m4_pattern_allow([^GSTREAMER_CFLAGS$])
m4trace:configure.ac:30: -1- AC_SUBST([GSTREAMER_LIBS])
m4trace:configure.ac:30: -1- AC_SUBST_TRACE([GSTREAMER_LIBS])
m4trace:configure.ac:30: -1- m4_pattern_allow([^GSTREAMER_LIBS$])
m4trace:configure.ac:38: -1- AC_SUBST([PYTHON])
m4trace:configure.ac:38: -1- AC_SUBST_TRACE([PYTHON])
m4trace:configure.ac:38: -1- m4_pattern_allow([^PYTHON$])
m4trace:configure.ac:38: -1- AC_SUBST([PYTHON])
m4trace:configure.ac:38: -1- AC_SUBST_TRACE([PYTHON])
m4trace:configure.ac:38: -1- m4_pattern_allow([^PYTHON$])
m4trace:configure.ac:38: -1- AC_SUBST([PYTHON_VERSION], [$am_cv_python_version])
m4trace:configure.ac:38: -1- AC_SUBST_TRACE([PYTHON_VERSION])
m4trace:configure.ac:38: -1- m4_pattern_allow([^PYTHON_VERSION$])
m4trace:configure.ac:38: -1- AC_SUBST([PYTHON_PLATFORM], [$am_cv_python_platform])
m4trace:configure.ac:38: -1- AC_SUBST_TRACE([PYTHON_PLATFORM])
m4trace:configure.ac:38: -1- m4_pattern_allow([^PYTHON_PLATFORM$])
m4trace:configure.ac:38: -1- AC_SUBST([PYTHON_PREFIX], [$am_python_prefix_subst])
m4trace:configure.ac:38: -1- AC_SUBST_TRACE([PYTHON_PREFIX])
m4trace:configure.ac:38: -1- m4_pattern_allow([^PYTHON_PREFIX$])
m4trace:configure.ac:38: -1- AC_SUBST([PYTHON_EXEC_PREFIX], [$am_python_exec_prefix_subst])
m4trace:configure.ac:38: -1- AC_SUBST_TRACE([PYTHON_EXEC_PREFIX])
m4trace:configure.ac:38: -1- m4_pattern_allow([^PYTHON_EXEC_PREFIX$])
m4trace:configure.ac:38: -1- AC_SUBST([pythondir], [$am_cv_python_pythondir])
m4trace:configure.ac:38: -1- AC_SUBST_TRACE([pythondir])
m4trace:configure.ac:38: -1- m4_pattern_allow([^pythondir$])
m4trace:configure.ac:38: -1- AC_SUBST([pkgpythondir], [\${pythondir}/$PACKAGE])
m4trace:configure.ac:38: -1- AC_SUBST_TRACE([pkgpythondir])
m4trace:configure.ac:38: -1- m4_pattern_allow([^pkgpythondir$])
m4trace:configure.ac:38: -1- AC_SUBST([pyexecdir], [$am_cv_python_pyexecdir])
m4trace:configure.ac:38: -1- AC_SUBST_TRACE([pyexecdir])
m4trace:configure.ac:38: -1- m4_pattern_allow([^pyexecdir$])
m4trace:configure.ac:38: -1- AC_SUBST([pkgpyexecdir], [\${pyexecdir}/$PACKAGE])
m4trace:configure.ac:38: -1- AC_SUBST_TRACE([pkgpyexecdir])
m4trace:configure.ac:38: -1- m4_pattern_allow([^pkgpyexecdir$])
m4trace:configure.ac:43: -1- _m4_warn([obsolete], [The macro 'AC_FD_CC' is obsolete.
You should run autoupdate.], [./lib/autoconf/general.m4:399: AC_FD_CC is expanded from...
lib/m4sugar/m4sh.m4:690: _AS_IF_ELSE is expanded from...
lib/m4sugar/m4sh.m4:697: AS_IF is expanded from...
./lib/autoconf/general.m4:2249: AC_CACHE_VAL is expanded from...
acinclude.m4:28: AM_CHECK_PYMOD is expanded from...
configure.ac:43: the top level])
m4trace:configure.ac:43: -1- _m4_warn([obsolete], [The macro 'AC_FD_CC' is obsolete.
You should run autoupdate.], [./lib/autoconf/general.m4:399: AC_FD_CC is expanded from...
lib/m4sugar/m4sh.m4:690: _AS_IF_ELSE is expanded from...
lib/m4sugar/m4sh.m4:697: AS_IF is expanded from...
./lib/autoconf/general.m4:2249: AC_CACHE_VAL is expanded from...
acinclude.m4:28: AM_CHECK_PYMOD is expanded from...
configure.ac:43: the top level])
m4trace:configure.ac:44: -1- _m4_warn([obsolete], [The macro 'AC_FD_CC' is obsolete.
You should run autoupdate.], [./lib/autoconf/general.m4:399: AC_FD_CC is expanded from...
lib/m4sugar/m4sh.m4:690: _AS_IF_ELSE is expanded from...
lib/m4sugar/m4sh.m4:697: AS_IF is expanded from...
./lib/autoconf/general.m4:2249: AC_CACHE_VAL is expanded from...
acinclude.m4:28: AM_CHECK_PYMOD is expanded from...
configure.ac:44: the top level])
m4trace:configure.ac:44: -1- _m4_warn([obsolete], [The macro 'AC_FD_CC' is obsolete.
You should run autoupdate.], [./lib/autoconf/general.m4:399: AC_FD_CC is expanded from...
lib/m4sugar/m4sh.m4:690: _AS_IF_ELSE is expanded from...
lib/m4sugar/m4sh.m4:697: AS_IF is expanded from...
./lib/autoconf/general.m4:2249: AC_CACHE_VAL is expanded from...
acinclude.m4:28: AM_CHECK_PYMOD is expanded from...
configure.ac:44: the top level])
m4trace:configure.ac:45: -1- _m4_warn([obsolete], [The macro 'AC_FD_CC' is obsolete.
You should run autoupdate.], [./lib/autoconf/general.m4:399: AC_FD_CC is expanded from...
lib/m4sugar/m4sh.m4:690: _AS_IF_ELSE is expanded from...
lib/m4sugar/m4sh.m4:697: AS_IF is expanded from...
./lib/autoconf/general.m4:2249: AC_CACHE_VAL is expanded from...
acinclude.m4:28: AM_CHECK_PYMOD is expanded from...
configure.ac:45: the top level])
m4trace:configure.ac:45: -1- _m4_warn([obsolete], [The macro 'AC_FD_CC' is obsolete.
You should run autoupdate.], [./lib/autoconf/general.m4:399: AC_FD_CC is expanded from...
lib/m4sugar/m4sh.m4:690: _AS_IF_ELSE is expanded from...
lib/m4sugar/m4sh.m4:697: AS_IF is expanded from...
./lib/autoconf/general.m4:2249: AC_CACHE_VAL is expanded from...
acinclude.m4:28: AM_CHECK_PYMOD is expanded from...
configure.ac:45: the top level])
m4trace:configure.ac:46: -1- _m4_warn([obsolete], [The macro 'AC_FD_CC' is obsolete.
You should run autoupdate.], [./lib/autoconf/general.m4:399: AC_FD_CC is expanded from...
lib/m4sugar/m4sh.m4:690: _AS_IF_ELSE is expanded from...
lib/m4sugar/m4sh.m4:697: AS_IF is expanded from...
./lib/autoconf/general.m4:2249: AC_CACHE_VAL is expanded from...
acinclude.m4:28: AM_CHECK_PYMOD is expanded from...
configure.ac:46: the top level])
m4trace:configure.ac:46: -1- _m4_warn([obsolete], [The macro 'AC_FD_CC' is obsolete.
You should run autoupdate.], [./lib/autoconf/general.m4:399: AC_FD_CC is expanded from...
lib/m4sugar/m4sh.m4:690: _AS_IF_ELSE is expanded from...
lib/m4sugar/m4sh.m4:697: AS_IF is expanded from...
./lib/autoconf/general.m4:2249: AC_CACHE_VAL is expanded from...
acinclude.m4:28: AM_CHECK_PYMOD is expanded from...
configure.ac:46: the top level])
m4trace:configure.ac:50: -1- _m4_warn([obsolete], [The macro 'AC_FD_CC' is obsolete.
You should run autoupdate.], [./lib/autoconf/general.m4:399: AC_FD_CC is expanded from...
lib/m4sugar/m4sh.m4:690: _AS_IF_ELSE is expanded from...
lib/m4sugar/m4sh.m4:697: AS_IF is expanded from...
./lib/autoconf/general.m4:2249: AC_CACHE_VAL is expanded from...
acinclude.m4:28: AM_CHECK_PYMOD is expanded from...
lib/m4sugar/m4sh.m4:697: AS_IF is expanded from...
configure.ac:50: the top level])
m4trace:configure.ac:50: -1- _m4_warn([obsolete], [The macro 'AC_FD_CC' is obsolete.
You should run autoupdate.], [./lib/autoconf/general.m4:399: AC_FD_CC is expanded from...
lib/m4sugar/m4sh.m4:690: _AS_IF_ELSE is expanded from...
lib/m4sugar/m4sh.m4:697: AS_IF is expanded from...
./lib/autoconf/general.m4:2249: AC_CACHE_VAL is expanded from...
acinclude.m4:28: AM_CHECK_PYMOD is expanded from...
lib/m4sugar/m4sh.m4:697: AS_IF is expanded from...
configure.ac:50: the top level])
m4trace:configure.ac:62: -1- AC_SUBST([LOUIS_TABLE_DIR])
m4trace:configure.ac:62: -1- AC_SUBST_TRACE([LOUIS_TABLE_DIR])
m4trace:configure.ac:62: -1- m4_pattern_allow([^LOUIS_TABLE_DIR$])
m4trace:configure.ac:65: -1- AC_SUBST([REVISION])
m4trace:configure.ac:65: -1- AC_SUBST_TRACE([REVISION])
m4trace:configure.ac:65: -1- m4_pattern_allow([^REVISION$])
m4trace:configure.ac:77: -1- AC_SUBST([PLATFORM_PATH])
m4trace:configure.ac:77: -1- AC_SUBST_TRACE([PLATFORM_PATH])
m4trace:configure.ac:77: -1- m4_pattern_allow([^PLATFORM_PATH$])
m4trace:configure.ac:79: -1- AC_CONFIG_FILES([
Makefile
docs/Makefile
docs/man/Makefile
po/Makefile.in
help/Makefile
icons/Makefile
src/Makefile
src/orca/Makefile
src/orca/scripts/Makefile
src/orca/scripts/apps/Makefile
src/orca/scripts/apps/Banshee/Makefile
src/orca/scripts/apps/Eclipse/Makefile
src/orca/scripts/apps/epiphany/Makefile
src/orca/scripts/apps/evince/Makefile
src/orca/scripts/apps/evolution/Makefile
src/orca/scripts/apps/gajim/Makefile
src/orca/scripts/apps/gcalctool/Makefile
src/orca/scripts/apps/gedit/Makefile
src/orca/scripts/apps/gnome-documents/Makefile
src/orca/scripts/apps/gnome-shell/Makefile
src/orca/scripts/apps/kwin/Makefile
src/orca/scripts/apps/notification-daemon/Makefile
src/orca/scripts/apps/notify-osd/Makefile
src/orca/scripts/apps/pidgin/Makefile
src/orca/scripts/apps/soffice/Makefile
src/orca/scripts/apps/SeaMonkey/Makefile
src/orca/scripts/apps/smuxi-frontend-gnome/Makefile
src/orca/scripts/apps/Thunderbird/Makefile
src/orca/scripts/apps/xfwm4/Makefile
src/orca/scripts/switcher/Makefile
src/orca/scripts/terminal/Makefile
src/orca/scripts/web/Makefile
src/orca/scripts/toolkits/Makefile
src/orca/scripts/toolkits/Chromium/Makefile
src/orca/scripts/toolkits/Gecko/Makefile
src/orca/scripts/toolkits/J2SE-access-bridge/Makefile
src/orca/scripts/toolkits/clutter/Makefile
src/orca/scripts/toolkits/GAIL/Makefile
src/orca/scripts/toolkits/Qt/Makefile
src/orca/scripts/toolkits/WebKitGtk/Makefile
src/orca/scripts/toolkits/gtk/Makefile
src/orca/backends/Makefile
src/orca/orca_bin.py
src/orca/orca_i18n.py
src/orca/orca_platform.py
])
m4trace:configure.ac:127: -1- AC_SUBST([LIB@&t@OBJS], [$ac_libobjs])
m4trace:configure.ac:127: -1- AC_SUBST_TRACE([LIB@&t@OBJS])
m4trace:configure.ac:127: -1- m4_pattern_allow([^LIB@&t@OBJS$])
m4trace:configure.ac:127: -1- AC_SUBST([LTLIBOBJS], [$ac_ltlibobjs])
m4trace:configure.ac:127: -1- AC_SUBST_TRACE([LTLIBOBJS])
m4trace:configure.ac:127: -1- m4_pattern_allow([^LTLIBOBJS$])
m4trace:configure.ac:127: -1- AM_CONDITIONAL([am__EXEEXT], [test -n "$EXEEXT"])
m4trace:configure.ac:127: -1- AC_SUBST([am__EXEEXT_TRUE])
m4trace:configure.ac:127: -1- AC_SUBST_TRACE([am__EXEEXT_TRUE])
m4trace:configure.ac:127: -1- m4_pattern_allow([^am__EXEEXT_TRUE$])
m4trace:configure.ac:127: -1- AC_SUBST([am__EXEEXT_FALSE])
m4trace:configure.ac:127: -1- AC_SUBST_TRACE([am__EXEEXT_FALSE])
m4trace:configure.ac:127: -1- m4_pattern_allow([^am__EXEEXT_FALSE$])
m4trace:configure.ac:127: -1- _AM_SUBST_NOTMAKE([am__EXEEXT_TRUE])
m4trace:configure.ac:127: -1- _AM_SUBST_NOTMAKE([am__EXEEXT_FALSE])
m4trace:configure.ac:127: -1- AC_SUBST_TRACE([top_builddir])
m4trace:configure.ac:127: -1- AC_SUBST_TRACE([top_build_prefix])
m4trace:configure.ac:127: -1- AC_SUBST_TRACE([srcdir])
m4trace:configure.ac:127: -1- AC_SUBST_TRACE([abs_srcdir])
m4trace:configure.ac:127: -1- AC_SUBST_TRACE([top_srcdir])
m4trace:configure.ac:127: -1- AC_SUBST_TRACE([abs_top_srcdir])
m4trace:configure.ac:127: -1- AC_SUBST_TRACE([builddir])
m4trace:configure.ac:127: -1- AC_SUBST_TRACE([abs_builddir])
m4trace:configure.ac:127: -1- AC_SUBST_TRACE([abs_top_builddir])
m4trace:configure.ac:127: -1- AC_SUBST_TRACE([INSTALL])
m4trace:configure.ac:127: -1- AC_SUBST_TRACE([MKDIR_P])

4848
autom4te.cache/traces.5 Normal file

File diff suppressed because it is too large Load Diff

4848
autom4te.cache/traces.6 Normal file

File diff suppressed because it is too large Load Diff

4848
autom4te.cache/traces.7 Normal file

File diff suppressed because it is too large Load Diff

4766
autom4te.cache/traces.8 Normal file

File diff suppressed because it is too large Load Diff

4994
autom4te.cache/traces.9 Normal file

File diff suppressed because it is too large Load Diff

9
ci/build_and_install.sh Normal file
View File

@ -0,0 +1,9 @@
#!/bin/sh
set -eux -o pipefail
mkdir -p _build
cd _build
../autogen.sh --prefix=/usr
make
make install

55
ci/container_builds.yml Normal file
View File

@ -0,0 +1,55 @@
include:
- remote: "https://gitlab.freedesktop.org/freedesktop/ci-templates/-/raw/80f87b3058efb75a1faae11826211375fba77e7f/templates/opensuse.yml"
variables:
# When branching change the suffix to avoid conflicts with images
# from the main branch
BASE_TAG: "2023-06-09.0-master"
FDO_UPSTREAM_REPO: "gnome/orca"
.orca_opensuse_tumbleweed_x86_64:
variables:
FDO_DISTRIBUTION_VERSION: "tumbleweed"
FDO_DISTRIBUTION_TAG: "x86_64-${BASE_TAG}"
opensuse-container@x86_64:
extends:
- .orca_opensuse_tumbleweed_x86_64
- .fdo.container-build@opensuse@x86_64
stage: "container-build"
variables:
FDO_DISTRIBUTION_PACKAGES: >-
autoconf
automake
dbus-1
dbus-1-devel
gcc
gettext
gettext-tools
git
glib2-devel
gobject-introspection-devel
gsettings-desktop-schemas
gstreamer-devel
itstool
libtool
libXi-devel
libXtst-devel
libxkbcommon-devel
libxml2-devel
libX11-devel
make
meson
ninja
python3
python3-brlapi
python3-louis
python3-pip
python3-speechd
python310-gobject-devel
python310-simplejson
xvfb-run
yelp-devel
yelp-tools
FDO_DISTRIBUTION_EXEC: >-
pip3 install ruff

11
ci/install_atspi.sh Normal file
View File

@ -0,0 +1,11 @@
#!/bin/sh
set -eux -o pipefail
git clone --depth 1 https://gitlab.gnome.org/GNOME/at-spi2-core.git
cd at-spi2-core
mkdir _build
meson setup --buildtype=debug --prefix=/usr _build .
meson compile -C _build
meson install -C _build

12
ci/install_pyatspi2.sh Normal file
View File

@ -0,0 +1,12 @@
#!/bin/sh
set -eux -o pipefail
git clone --depth 1 https://gitlab.gnome.org/GNOME/pyatspi2.git
cd pyatspi2
mkdir _build
cd _build
../autogen.sh --prefix=/usr
make
make install

View File

@ -0,0 +1,30 @@
#!/bin/sh
#
# Utility script so you can pull the container image from CI for local development.
# Run this script and follow the instructions; the script will tell you how
# to run "podman run" to launch a container that has the same environment as the
# one used during CI pipelines. You can debug things at leisure there.
set -eu
set -o pipefail
CONTAINER_BUILDS=ci/container_builds.yml
if [ ! -f $CONTAINER_BUILDS ]
then
echo "Please run this from the toplevel source directory in orca"
exit 1
fi
tag=$(grep -e '^ BASE_TAG:' $CONTAINER_BUILDS | head -n 1 | sed -E 's/.*BASE_TAG: "(.+)"/\1/')
full_tag=x86_64-$tag
echo full_tag=\"$full_tag\"
image_name=registry.gitlab.gnome.org/gnome/orca/opensuse/tumbleweed:$full_tag
echo pulling image $image_name
podman pull $image_name
echo ""
echo "You can now run this:"
echo " podman run --rm -ti --cap-add=SYS_PTRACE -v \$(pwd):/srv/project -w /srv/project $image_name"

351
compile Executable file
View File

@ -0,0 +1,351 @@
#! /bin/sh
# Wrapper for compilers which do not understand '-c -o'.
scriptversion=2024-06-19.01; # UTC
# Copyright (C) 1999-2024 Free Software Foundation, Inc.
# Written by Tom Tromey <tromey@cygnus.com>.
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2, or (at your option)
# any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program. If not, see <https://www.gnu.org/licenses/>.
# As a special exception to the GNU General Public License, if you
# distribute this file as part of a program that contains a
# configuration script generated by Autoconf, you may include it under
# the same distribution terms that you use for the rest of that program.
# This file is maintained in Automake, please report
# bugs to <bug-automake@gnu.org> or send patches to
# <automake-patches@gnu.org>.
nl='
'
# We need space, tab and new line, in precisely that order. Quoting is
# there to prevent tools from complaining about whitespace usage.
IFS=" "" $nl"
file_conv=
# func_file_conv build_file lazy
# Convert a $build file to $host form and store it in $file
# Currently only supports Windows hosts. If the determined conversion
# type is listed in (the comma separated) LAZY, no conversion will
# take place.
func_file_conv ()
{
file=$1
case $file in
/ | /[!/]*) # absolute file, and not a UNC file
if test -z "$file_conv"; then
# lazily determine how to convert abs files
case `uname -s` in
MINGW*)
file_conv=mingw
;;
CYGWIN* | MSYS*)
file_conv=cygwin
;;
*)
file_conv=wine
;;
esac
fi
case $file_conv/,$2, in
*,$file_conv,*)
;;
mingw/*)
file=`cmd //C echo "$file " | sed -e 's/"\(.*\) " *$/\1/'`
;;
cygwin/* | msys/*)
file=`cygpath -m "$file" || echo "$file"`
;;
wine/*)
file=`winepath -w "$file" || echo "$file"`
;;
esac
;;
esac
}
# func_cl_dashL linkdir
# Make cl look for libraries in LINKDIR
func_cl_dashL ()
{
func_file_conv "$1"
if test -z "$lib_path"; then
lib_path=$file
else
lib_path="$lib_path;$file"
fi
linker_opts="$linker_opts -LIBPATH:$file"
}
# func_cl_dashl library
# Do a library search-path lookup for cl
func_cl_dashl ()
{
lib=$1
found=no
save_IFS=$IFS
IFS=';'
for dir in $lib_path $LIB
do
IFS=$save_IFS
if $shared && test -f "$dir/$lib.dll.lib"; then
found=yes
lib=$dir/$lib.dll.lib
break
fi
if test -f "$dir/$lib.lib"; then
found=yes
lib=$dir/$lib.lib
break
fi
if test -f "$dir/lib$lib.a"; then
found=yes
lib=$dir/lib$lib.a
break
fi
done
IFS=$save_IFS
if test "$found" != yes; then
lib=$lib.lib
fi
}
# func_cl_wrapper cl arg...
# Adjust compile command to suit cl
func_cl_wrapper ()
{
# Assume a capable shell
lib_path=
shared=:
linker_opts=
for arg
do
if test -n "$eat"; then
eat=
else
case $1 in
-o)
# configure might choose to run compile as 'compile cc -o foo foo.c'.
eat=1
case $2 in
*.o | *.lo | *.[oO][bB][jJ])
func_file_conv "$2"
set x "$@" -Fo"$file"
shift
;;
*)
func_file_conv "$2"
set x "$@" -Fe"$file"
shift
;;
esac
;;
-I)
eat=1
func_file_conv "$2" mingw
set x "$@" -I"$file"
shift
;;
-I*)
func_file_conv "${1#-I}" mingw
set x "$@" -I"$file"
shift
;;
-l)
eat=1
func_cl_dashl "$2"
set x "$@" "$lib"
shift
;;
-l*)
func_cl_dashl "${1#-l}"
set x "$@" "$lib"
shift
;;
-L)
eat=1
func_cl_dashL "$2"
;;
-L*)
func_cl_dashL "${1#-L}"
;;
-static)
shared=false
;;
-Wl,*)
arg=${1#-Wl,}
save_ifs="$IFS"; IFS=','
for flag in $arg; do
IFS="$save_ifs"
linker_opts="$linker_opts $flag"
done
IFS="$save_ifs"
;;
-Xlinker)
eat=1
linker_opts="$linker_opts $2"
;;
-*)
set x "$@" "$1"
shift
;;
*.cc | *.CC | *.cxx | *.CXX | *.[cC]++)
func_file_conv "$1"
set x "$@" -Tp"$file"
shift
;;
*.c | *.cpp | *.CPP | *.lib | *.LIB | *.Lib | *.OBJ | *.obj | *.[oO])
func_file_conv "$1" mingw
set x "$@" "$file"
shift
;;
*)
set x "$@" "$1"
shift
;;
esac
fi
shift
done
if test -n "$linker_opts"; then
linker_opts="-link$linker_opts"
fi
exec "$@" $linker_opts
exit 1
}
eat=
case $1 in
'')
echo "$0: No command. Try '$0 --help' for more information." 1>&2
exit 1;
;;
-h | --h*)
cat <<\EOF
Usage: compile [--help] [--version] PROGRAM [ARGS]
Wrapper for compilers which do not understand '-c -o'.
Remove '-o dest.o' from ARGS, run PROGRAM with the remaining
arguments, and rename the output as expected.
If you are trying to build a whole package this is not the
right script to run: please start by reading the file 'INSTALL'.
Report bugs to <bug-automake@gnu.org>.
GNU Automake home page: <https://www.gnu.org/software/automake/>.
General help using GNU software: <https://www.gnu.org/gethelp/>.
EOF
exit $?
;;
-v | --v*)
echo "compile (GNU Automake) $scriptversion"
exit $?
;;
cl | *[/\\]cl | cl.exe | *[/\\]cl.exe | \
clang-cl | *[/\\]clang-cl | clang-cl.exe | *[/\\]clang-cl.exe | \
icl | *[/\\]icl | icl.exe | *[/\\]icl.exe )
func_cl_wrapper "$@" # Doesn't return...
;;
esac
ofile=
cfile=
for arg
do
if test -n "$eat"; then
eat=
else
case $1 in
-o)
# configure might choose to run compile as 'compile cc -o foo foo.c'.
# So we strip '-o arg' only if arg is an object.
eat=1
case $2 in
*.o | *.obj)
ofile=$2
;;
*)
set x "$@" -o "$2"
shift
;;
esac
;;
*.c)
cfile=$1
set x "$@" "$1"
shift
;;
*)
set x "$@" "$1"
shift
;;
esac
fi
shift
done
if test -z "$ofile" || test -z "$cfile"; then
# If no '-o' option was seen then we might have been invoked from a
# pattern rule where we don't need one. That is ok -- this is a
# normal compilation that the losing compiler can handle. If no
# '.c' file was seen then we are probably linking. That is also
# ok.
exec "$@"
fi
# Name of file we expect compiler to create.
cofile=`echo "$cfile" | sed 's|^.*[\\/]||; s|^[a-zA-Z]:||; s/\.c$/.o/'`
# Create the lock directory.
# Note: use '[/\\:.-]' here to ensure that we don't use the same name
# that we are using for the .o file. Also, base the name on the expected
# object file name, since that is what matters with a parallel build.
lockdir=`echo "$cofile" | sed -e 's|[/\\:.-]|_|g'`.d
while true; do
if mkdir "$lockdir" >/dev/null 2>&1; then
break
fi
sleep 1
done
# FIXME: race condition here if user kills between mkdir and trap.
trap "rmdir '$lockdir'; exit 1" 1 2 15
# Run the compile.
"$@"
ret=$?
if test -f "$cofile"; then
test "$cofile" = "$ofile" || mv "$cofile" "$ofile"
elif test -f "${cofile}bj"; then
test "${cofile}bj" = "$ofile" || mv "${cofile}bj" "$ofile"
fi
rmdir "$lockdir"
exit $ret
# Local Variables:
# mode: shell-script
# sh-indentation: 2
# eval: (add-hook 'before-save-hook 'time-stamp)
# time-stamp-start: "scriptversion="
# time-stamp-format: "%:y-%02m-%02d.%02H"
# time-stamp-time-zone: "UTC0"
# time-stamp-end: "; # UTC"
# End:

1812
config.guess vendored Executable file

File diff suppressed because it is too large Load Diff

1748
config.guess~ Executable file

File diff suppressed because it is too large Load Diff

931
config.log Normal file
View File

@ -0,0 +1,931 @@
This file contains any messages produced by compilers while
running configure, to aid debugging if configure makes a mistake.
It was created by orca configure 45.3, which was
generated by GNU Autoconf 2.72. Invocation command line was
$ ./configure --prefix=/usr/local --sysconfdir=/etc --localstatedir=/var
## --------- ##
## Platform. ##
## --------- ##
hostname = fenrir
uname -m = x86_64
uname -r = 6.10.10-arch1-1
uname -s = Linux
uname -v = #1 SMP PREEMPT_DYNAMIC Thu, 12 Sep 2024 17:21:02 +0000
/usr/bin/uname -p = unknown
/bin/uname -X = unknown
/bin/arch = unknown
/usr/bin/arch -k = unknown
/usr/convex/getsysinfo = unknown
/usr/bin/hostinfo = unknown
/bin/machine = unknown
/usr/bin/oslevel = unknown
/bin/universe = unknown
PATH: /home/storm/.pyenv/shims/
PATH: /usr/local/sbin/
PATH: /usr/local/bin/
PATH: /usr/bin/
PATH: /opt/cuda/bin/
PATH: /opt/cuda/nsight_compute/
PATH: /opt/cuda/nsight_systems/bin/
PATH: /var/lib/flatpak/exports/bin/
PATH: /usr/lib/jvm/default/bin/
PATH: /usr/bin/site_perl/
PATH: /usr/bin/vendor_perl/
PATH: /usr/bin/core_perl/
PATH: /usr/lib/rustup/bin/
PATH: /home/storm/node_modules/.bin/
PATH: /home/storm/bin/
PATH: /home/storm/.local/bin/
PATH: /usr/lib/surfraw/
PATH: /home/storm/node_modules/.bin/
PATH: /home/storm/bin/
PATH: /home/storm/.local/bin/
PATH: /usr/lib/surfraw/
## ----------- ##
## Core tests. ##
## ----------- ##
configure:2382: looking for aux files: config.guess config.sub compile config.rpath missing install-sh
configure:2395: trying ./
configure:2424: ./config.guess found
configure:2424: ./config.sub found
configure:2424: ./compile found
configure:2424: ./config.rpath found
configure:2424: ./missing found
configure:2406: ./install-sh found
configure:2557: checking for a BSD-compatible install
configure:2631: result: /usr/bin/install -c
configure:2642: checking whether sleep supports fractional seconds
configure:2658: result: yes
configure:2661: checking filesystem timestamp resolution
configure:2796: result: 0.01
configure:2801: checking whether build environment is sane
configure:2842: result: yes
configure:3013: checking for a race-free mkdir -p
configure:3056: result: /usr/bin/mkdir -p
configure:3063: checking for gawk
configure:3084: found /usr/bin/gawk
configure:3096: result: gawk
configure:3107: checking whether make sets $(MAKE)
configure:3131: result: yes
configure:3157: checking whether make supports nested variables
configure:3176: result: yes
configure:3190: checking xargs -n works
configure:3206: result: yes
configure:3291: checking whether UID '1000' is supported by ustar format
configure:3297: result: yes
configure:3304: checking whether GID '1000' is supported by ustar format
configure:3310: result: yes
configure:3318: checking how to create a ustar tar archive
configure:3329: tar --version
tar (GNU tar) 1.35
Copyright (C) 2023 Free Software Foundation, Inc.
License GPLv3+: GNU GPL version 3 or later <https://gnu.org/licenses/gpl.html>.
This is free software: you are free to change and redistribute it.
There is NO WARRANTY, to the extent permitted by law.
Written by John Gilmore and Jay Fenlason.
configure:3332: $? = 0
configure:3372: tardir=conftest.dir && eval tar --format=ustar -chf - "$tardir" >conftest.tar
configure:3375: $? = 0
configure:3379: tar -xf - <conftest.tar
configure:3382: $? = 0
configure:3384: cat conftest.dir/file
GrepMe
configure:3387: $? = 0
configure:3402: result: gnutar
configure:3429: checking whether to enable maintainer-specific portions of Makefiles
configure:3440: result: yes
configure:3457: checking for a sed that does not truncate output
configure:3529: result: /usr/bin/sed
configure:3535: checking whether NLS is requested
configure:3546: result: yes
configure:3586: checking for msgfmt
configure: trying /usr/bin/msgfmt...
0 translated messages.
configure:3620: result: /usr/bin/msgfmt
configure:3629: checking for gmsgfmt
configure:3666: result: /usr/bin/msgfmt
configure:3711: checking for xgettext
configure: trying /usr/bin/xgettext...
/usr/bin/xgettext: warning: file '/dev/null' extension '' is unknown; will try C
configure:3745: result: /usr/bin/xgettext
configure:3790: checking for msgmerge
configure: trying /usr/bin/msgmerge...
configure:3823: result: /usr/bin/msgmerge
configure:3877: checking whether make supports the include directive
configure:3892: make -f confmf.GNU && cat confinc.out
this is the am__doit target
configure:3895: $? = 0
configure:3914: result: yes (GNU style)
configure:3991: checking for gcc
configure:4012: found /usr/bin/gcc
configure:4024: result: gcc
configure:4383: checking for C compiler version
configure:4392: gcc --version >&5
gcc (GCC) 14.2.1 20240910
Copyright (C) 2024 Free Software Foundation, Inc.
This is free software; see the source for copying conditions. There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
configure:4403: $? = 0
configure:4392: gcc -v >&5
Using built-in specs.
COLLECT_GCC=gcc
COLLECT_LTO_WRAPPER=/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/lto-wrapper
Target: x86_64-pc-linux-gnu
Configured with: /build/gcc/src/gcc/configure --enable-languages=ada,c,c++,d,fortran,go,lto,m2,objc,obj-c++,rust --enable-bootstrap --prefix=/usr --libdir=/usr/lib --libexecdir=/usr/lib --mandir=/usr/share/man --infodir=/usr/share/info --with-bugurl=https://gitlab.archlinux.org/archlinux/packaging/packages/gcc/-/issues --with-build-config=bootstrap-lto --with-linker-hash-style=gnu --with-system-zlib --enable-__cxa_atexit --enable-cet=auto --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-default-ssp --enable-gnu-indirect-function --enable-gnu-unique-object --enable-libstdcxx-backtrace --enable-link-serialization=1 --enable-linker-build-id --enable-lto --enable-multilib --enable-plugin --enable-shared --enable-threads=posix --disable-libssp --disable-libstdcxx-pch --disable-werror
Thread model: posix
Supported LTO compression algorithms: zlib zstd
gcc version 14.2.1 20240910 (GCC)
configure:4403: $? = 0
configure:4392: gcc -V >&5
gcc: error: unrecognized command-line option '-V'
gcc: fatal error: no input files
compilation terminated.
configure:4403: $? = 1
configure:4392: gcc -qversion >&5
gcc: error: unrecognized command-line option '-qversion'; did you mean '--version'?
gcc: fatal error: no input files
compilation terminated.
configure:4403: $? = 1
configure:4392: gcc -version >&5
gcc: error: unrecognized command-line option '-version'
gcc: fatal error: no input files
compilation terminated.
configure:4403: $? = 1
configure:4423: checking whether the C compiler works
configure:4445: gcc conftest.c >&5
configure:4449: $? = 0
configure:4500: result: yes
configure:4504: checking for C compiler default output file name
configure:4506: result: a.out
configure:4512: checking for suffix of executables
configure:4519: gcc -o conftest conftest.c >&5
configure:4523: $? = 0
configure:4547: result:
configure:4571: checking whether we are cross compiling
configure:4579: gcc -o conftest conftest.c >&5
configure:4583: $? = 0
configure:4590: ./conftest
configure:4594: $? = 0
configure:4609: result: no
configure:4615: checking for suffix of object files
configure:4638: gcc -c conftest.c >&5
configure:4642: $? = 0
configure:4666: result: o
configure:4670: checking whether the compiler supports GNU C
configure:4690: gcc -c conftest.c >&5
configure:4690: $? = 0
configure:4702: result: yes
configure:4713: checking whether gcc accepts -g
configure:4734: gcc -c -g conftest.c >&5
configure:4734: $? = 0
configure:4781: result: yes
configure:4801: checking for gcc option to enable C11 features
configure:4816: gcc -c -g -O2 conftest.c >&5
configure:4816: $? = 0
configure:4835: result: none needed
configure:4959: checking whether gcc understands -c and -o together
configure:4982: gcc -c conftest.c -o conftest2.o
configure:4985: $? = 0
configure:4982: gcc -c conftest.c -o conftest2.o
configure:4985: $? = 0
configure:4998: result: yes
configure:5017: checking dependency style of gcc
configure:5130: result: none
configure:5151: checking build system type
configure:5167: result: x86_64-pc-linux-gnu
configure:5187: checking host system type
configure:5202: result: x86_64-pc-linux-gnu
configure:5251: checking for ld used by gcc
configure:5381: result: /usr/bin/ld
configure:5388: checking if the linker (/usr/bin/ld) is GNU ld
configure:5405: result: yes
configure:5413: checking for shared library run path origin
configure:5428: result: done
configure:5451: checking 32-bit host C ABI
configure:5504: gcc -c -g -O2 conftest.c >&5
configure:5504: $? = 0
configure:5518: result: no
configure:5528: checking how to run the C preprocessor
configure:5554: gcc -E conftest.c
configure:5554: $? = 0
configure:5570: gcc -E conftest.c
conftest.c:11:10: fatal error: ac_nonexistent.h: No such file or directory
11 | #include <ac_nonexistent.h>
| ^~~~~~~~~~~~~~~~~~
compilation terminated.
configure:5570: $? = 1
configure: failed program was:
| /* confdefs.h */
| #define PACKAGE_NAME "orca"
| #define PACKAGE_TARNAME "orca"
| #define PACKAGE_VERSION "45.3"
| #define PACKAGE_STRING "orca 45.3"
| #define PACKAGE_BUGREPORT "https://gitlab.gnome.org/GNOME/orca/-/issues/"
| #define PACKAGE_URL ""
| #define PACKAGE "orca"
| #define VERSION "45.3"
| /* end confdefs.h. */
| #include <ac_nonexistent.h>
configure:5599: result: gcc -E
configure:5613: gcc -E conftest.c
configure:5613: $? = 0
configure:5629: gcc -E conftest.c
conftest.c:11:10: fatal error: ac_nonexistent.h: No such file or directory
11 | #include <ac_nonexistent.h>
| ^~~~~~~~~~~~~~~~~~
compilation terminated.
configure:5629: $? = 1
configure: failed program was:
| /* confdefs.h */
| #define PACKAGE_NAME "orca"
| #define PACKAGE_TARNAME "orca"
| #define PACKAGE_VERSION "45.3"
| #define PACKAGE_STRING "orca 45.3"
| #define PACKAGE_BUGREPORT "https://gitlab.gnome.org/GNOME/orca/-/issues/"
| #define PACKAGE_URL ""
| #define PACKAGE "orca"
| #define VERSION "45.3"
| /* end confdefs.h. */
| #include <ac_nonexistent.h>
configure:5662: checking for egrep -e
configure:5792: result: /usr/bin/grep -E
configure:5800: checking for ELF binary format
configure:5826: result: yes
configure:5878: checking for the common suffixes of directories in the library search path
configure:5955: result: lib,lib,lib64
configure:6489: checking for CFPreferencesCopyAppValue
configure:6508: gcc -o conftest -g -O2 conftest.c -Wl,-framework -Wl,CoreFoundation >&5
conftest.c:11:10: fatal error: CoreFoundation/CFPreferences.h: No such file or directory
11 | #include <CoreFoundation/CFPreferences.h>
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
compilation terminated.
configure:6508: $? = 1
configure: failed program was:
| /* confdefs.h */
| #define PACKAGE_NAME "orca"
| #define PACKAGE_TARNAME "orca"
| #define PACKAGE_VERSION "45.3"
| #define PACKAGE_STRING "orca 45.3"
| #define PACKAGE_BUGREPORT "https://gitlab.gnome.org/GNOME/orca/-/issues/"
| #define PACKAGE_URL ""
| #define PACKAGE "orca"
| #define VERSION "45.3"
| /* end confdefs.h. */
| #include <CoreFoundation/CFPreferences.h>
| int
| main (void)
| {
| CFPreferencesCopyAppValue(NULL, NULL)
| ;
| return 0;
| }
configure:6520: result: no
configure:6527: checking for CFLocaleCopyPreferredLanguages
configure:6546: gcc -o conftest -g -O2 conftest.c -Wl,-framework -Wl,CoreFoundation >&5
conftest.c:11:10: fatal error: CoreFoundation/CFLocale.h: No such file or directory
11 | #include <CoreFoundation/CFLocale.h>
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
compilation terminated.
configure:6546: $? = 1
configure: failed program was:
| /* confdefs.h */
| #define PACKAGE_NAME "orca"
| #define PACKAGE_TARNAME "orca"
| #define PACKAGE_VERSION "45.3"
| #define PACKAGE_STRING "orca 45.3"
| #define PACKAGE_BUGREPORT "https://gitlab.gnome.org/GNOME/orca/-/issues/"
| #define PACKAGE_URL ""
| #define PACKAGE "orca"
| #define VERSION "45.3"
| /* end confdefs.h. */
| #include <CoreFoundation/CFLocale.h>
| int
| main (void)
| {
| CFLocaleCopyPreferredLanguages();
| ;
| return 0;
| }
configure:6558: result: no
configure:6608: checking for GNU gettext in libc
configure:6638: gcc -o conftest -g -O2 conftest.c >&5
configure:6638: $? = 0
configure:6650: result: yes
configure:7561: checking whether to use NLS
configure:7563: result: yes
configure:7566: checking where the gettext function comes from
configure:7577: result: libc
configure:7680: checking whether ln -s works
configure:7684: result: yes
configure:7728: checking for itstool
configure:7749: found /usr/bin/itstool
configure:7761: result: itstool
configure:7776: checking for xmllint
configure:7797: found /usr/bin/xmllint
configure:7809: result: xmllint
configure:8056: checking for pkg-config
configure:8079: found /usr/bin/pkg-config
configure:8092: result: /usr/bin/pkg-config
configure:8117: checking pkg-config is at least version 0.9.0
configure:8120: result: yes
configure:8130: checking for pygobject-3.0 >= 3.18
configure:8137: $PKG_CONFIG --exists --print-errors "pygobject-3.0 >= 3.18"
configure:8140: $? = 0
configure:8154: $PKG_CONFIG --exists --print-errors "pygobject-3.0 >= 3.18"
configure:8157: $? = 0
configure:8215: result: yes
configure:8221: checking for atspi-2 >= 2.48
configure:8228: $PKG_CONFIG --exists --print-errors "atspi-2 >= 2.48"
configure:8231: $? = 0
configure:8245: $PKG_CONFIG --exists --print-errors "atspi-2 >= 2.48"
configure:8248: $? = 0
configure:8306: result: yes
configure:8312: checking for atk-bridge-2.0 >= 2.26
configure:8319: $PKG_CONFIG --exists --print-errors "atk-bridge-2.0 >= 2.26"
configure:8322: $? = 0
configure:8336: $PKG_CONFIG --exists --print-errors "atk-bridge-2.0 >= 2.26"
configure:8339: $? = 0
configure:8397: result: yes
configure:8403: checking for gstreamer-1.0
configure:8410: $PKG_CONFIG --exists --print-errors "gstreamer-1.0"
configure:8413: $? = 0
configure:8427: $PKG_CONFIG --exists --print-errors "gstreamer-1.0"
configure:8430: $? = 0
configure:8468: result: yes
configure:8512: checking for a Python interpreter with version >= 3.3
configure:8530: python -c import sys # split strings by '.' and convert to numeric. Append some zeros # because we need at least 4 digits for the hex conversion. # map returns an iterator in Python 3.0 and a list in 2.x minver = list(map(int, '3.3'.split('.'))) + [0, 0, 0] minverhex = 0 # xrange is not present in Python 3.0 and range returns an iterator for i in list(range(0, 4)): minverhex = (minverhex << 8) + minver[i] sys.exit(sys.hexversion < minverhex)
configure:8533: $? = 0
configure:8541: result: python
configure:8549: checking for python
configure:8572: found /home/storm/.pyenv/shims/python
configure:8585: result: /home/storm/.pyenv/shims/python
configure:8602: checking for python version
configure:8611: result: 3.12
configure:8616: checking for python platform
configure:8625: result: linux
configure:8688: checking for GNU default python prefix
configure:8690: result: ${prefix}
configure:8758: checking for GNU default python exec_prefix
configure:8760: result: ${exec_prefix}
configure:8807: checking for python script directory (pythondir)
configure:8847: result: ${PYTHON_PREFIX}/lib/python3.12/site-packages
configure:8855: checking for python extension module directory (pyexecdir)
configure:8895: result: ${PYTHON_EXEC_PREFIX}/lib/python3.12/site-packages
configure:8912: checking for python module gi
configure:8941: result: yes
configure:8951: checking for python module json
configure:8980: result: yes
configure:8990: checking for python module brlapi
configure:9019: result: yes
configure:9030: checking for python module speechd
configure:9059: result: yes
configure:9080: checking for python module louis
configure:9109: result: yes
configure:9286: checking that generated files are newer than configure
configure:9292: result: done
configure:9331: creating ./config.status
## ---------------------- ##
## Running config.status. ##
## ---------------------- ##
This file was extended by orca config.status 45.3, which was
generated by GNU Autoconf 2.72. Invocation command line was
CONFIG_FILES =
CONFIG_HEADERS =
CONFIG_LINKS =
CONFIG_COMMANDS =
$ ./config.status
on fenrir
config.status:1062: creating Makefile
config.status:1062: creating docs/Makefile
config.status:1062: creating docs/man/Makefile
config.status:1062: creating po/Makefile.in
config.status:1062: creating help/Makefile
config.status:1062: creating icons/Makefile
config.status:1062: creating src/Makefile
config.status:1062: creating src/orca/Makefile
config.status:1062: creating src/orca/scripts/Makefile
config.status:1062: creating src/orca/scripts/apps/Makefile
config.status:1062: creating src/orca/scripts/apps/Banshee/Makefile
config.status:1062: creating src/orca/scripts/apps/Eclipse/Makefile
config.status:1062: creating src/orca/scripts/apps/epiphany/Makefile
config.status:1062: creating src/orca/scripts/apps/evince/Makefile
config.status:1062: creating src/orca/scripts/apps/evolution/Makefile
config.status:1062: creating src/orca/scripts/apps/gajim/Makefile
config.status:1062: creating src/orca/scripts/apps/gcalctool/Makefile
config.status:1062: creating src/orca/scripts/apps/gedit/Makefile
config.status:1062: creating src/orca/scripts/apps/gnome-documents/Makefile
config.status:1062: creating src/orca/scripts/apps/gnome-shell/Makefile
config.status:1062: creating src/orca/scripts/apps/kwin/Makefile
config.status:1062: creating src/orca/scripts/apps/notification-daemon/Makefile
config.status:1062: creating src/orca/scripts/apps/notify-osd/Makefile
config.status:1062: creating src/orca/scripts/apps/pidgin/Makefile
config.status:1062: creating src/orca/scripts/apps/soffice/Makefile
config.status:1062: creating src/orca/scripts/apps/SeaMonkey/Makefile
config.status:1062: creating src/orca/scripts/apps/smuxi-frontend-gnome/Makefile
config.status:1062: creating src/orca/scripts/apps/Thunderbird/Makefile
config.status:1062: creating src/orca/scripts/apps/xfwm4/Makefile
config.status:1062: creating src/orca/scripts/switcher/Makefile
config.status:1062: creating src/orca/scripts/terminal/Makefile
config.status:1062: creating src/orca/scripts/web/Makefile
config.status:1062: creating src/orca/scripts/toolkits/Makefile
config.status:1062: creating src/orca/scripts/toolkits/Chromium/Makefile
config.status:1062: creating src/orca/scripts/toolkits/Gecko/Makefile
config.status:1062: creating src/orca/scripts/toolkits/J2SE-access-bridge/Makefile
config.status:1062: creating src/orca/scripts/toolkits/clutter/Makefile
config.status:1062: creating src/orca/scripts/toolkits/GAIL/Makefile
config.status:1062: creating src/orca/scripts/toolkits/Qt/Makefile
config.status:1062: creating src/orca/scripts/toolkits/WebKitGtk/Makefile
config.status:1062: creating src/orca/scripts/toolkits/gtk/Makefile
config.status:1062: creating src/orca/backends/Makefile
config.status:1062: creating src/orca/orca_bin.py
config.status:1062: creating src/orca/orca_i18n.py
config.status:1170: WARNING: 'src/orca/orca_i18n.py.in' seems to ignore the --datarootdir setting
config.status:1062: creating src/orca/orca_platform.py
config.status:1170: WARNING: 'src/orca/orca_platform.py.in' seems to ignore the --datarootdir setting
config.status:1234: executing po-directories commands
config.status:1234: executing depfiles commands
config.status:1234: executing default commands
## ---------------- ##
## Cache variables. ##
## ---------------- ##
ac_cv_build=x86_64-pc-linux-gnu
ac_cv_c_compiler_gnu=yes
ac_cv_env_ATKBRIDGE_CFLAGS_set=
ac_cv_env_ATKBRIDGE_CFLAGS_value=
ac_cv_env_ATKBRIDGE_LIBS_set=
ac_cv_env_ATKBRIDGE_LIBS_value=
ac_cv_env_ATSPI2_CFLAGS_set=
ac_cv_env_ATSPI2_CFLAGS_value=
ac_cv_env_ATSPI2_LIBS_set=
ac_cv_env_ATSPI2_LIBS_value=
ac_cv_env_CC_set=
ac_cv_env_CC_value=
ac_cv_env_CFLAGS_set=
ac_cv_env_CFLAGS_value=
ac_cv_env_CPPFLAGS_set=
ac_cv_env_CPPFLAGS_value=
ac_cv_env_CPP_set=
ac_cv_env_CPP_value=
ac_cv_env_GSTREAMER_CFLAGS_set=
ac_cv_env_GSTREAMER_CFLAGS_value=
ac_cv_env_GSTREAMER_LIBS_set=
ac_cv_env_GSTREAMER_LIBS_value=
ac_cv_env_ITSTOOL_set=
ac_cv_env_ITSTOOL_value=
ac_cv_env_LDFLAGS_set=
ac_cv_env_LDFLAGS_value=
ac_cv_env_LIBS_set=
ac_cv_env_LIBS_value=
ac_cv_env_PKG_CONFIG_LIBDIR_set=
ac_cv_env_PKG_CONFIG_LIBDIR_value=
ac_cv_env_PKG_CONFIG_PATH_set=
ac_cv_env_PKG_CONFIG_PATH_value=
ac_cv_env_PKG_CONFIG_set=
ac_cv_env_PKG_CONFIG_value=
ac_cv_env_PYGOBJECT_CFLAGS_set=
ac_cv_env_PYGOBJECT_CFLAGS_value=
ac_cv_env_PYGOBJECT_LIBS_set=
ac_cv_env_PYGOBJECT_LIBS_value=
ac_cv_env_PYTHON_set=
ac_cv_env_PYTHON_value=
ac_cv_env_XMLLINT_set=
ac_cv_env_XMLLINT_value=
ac_cv_env_build_alias_set=
ac_cv_env_build_alias_value=
ac_cv_env_host_alias_set=
ac_cv_env_host_alias_value=
ac_cv_env_target_alias_set=
ac_cv_env_target_alias_value=
ac_cv_host=x86_64-pc-linux-gnu
ac_cv_objext=o
ac_cv_path_EGREP_TRADITIONAL='/usr/bin/grep -E'
ac_cv_path_GMSGFMT=/usr/bin/msgfmt
ac_cv_path_MSGFMT=/usr/bin/msgfmt
ac_cv_path_MSGMERGE=/usr/bin/msgmerge
ac_cv_path_PYTHON=/home/storm/.pyenv/shims/python
ac_cv_path_SED=/usr/bin/sed
ac_cv_path_XGETTEXT=/usr/bin/xgettext
ac_cv_path_ac_pt_PKG_CONFIG=/usr/bin/pkg-config
ac_cv_path_install='/usr/bin/install -c'
ac_cv_path_mkdir=/usr/bin/mkdir
ac_cv_prog_AWK=gawk
ac_cv_prog_CPP='gcc -E'
ac_cv_prog_ITSTOOL=itstool
ac_cv_prog_XMLLINT=xmllint
ac_cv_prog_ac_ct_CC=gcc
ac_cv_prog_cc_c11=
ac_cv_prog_cc_g=yes
ac_cv_prog_cc_stdc=
ac_cv_prog_make_make_set=yes
acl_cv_hardcode_direct=no
acl_cv_hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
acl_cv_hardcode_libdir_separator=
acl_cv_hardcode_minus_L=no
acl_cv_libdirstems=lib,lib,lib64
acl_cv_libext=a
acl_cv_libname_spec='lib$name'
acl_cv_library_names_spec='$libname$shrext'
acl_cv_path_LD=/usr/bin/ld
acl_cv_prog_gnu_ld=yes
acl_cv_rpath=done
acl_cv_shlibext=so
acl_cv_wl=-Wl,
am_cv_CC_dependencies_compiler_type=none
am_cv_filesystem_timestamp_resolution=0.01
am_cv_make_support_nested_variables=yes
am_cv_pathless_PYTHON=python
am_cv_prog_cc_c_o=yes
am_cv_prog_tar_ustar=gnutar
am_cv_python_platform=linux
am_cv_python_pyexecdir='${PYTHON_EXEC_PREFIX}/lib/python3.12/site-packages'
am_cv_python_pythondir='${PYTHON_PREFIX}/lib/python3.12/site-packages'
am_cv_python_version=3.12
am_cv_sleep_fractional_seconds=yes
am_cv_xargs_n_works=yes
gl_cv_elf=yes
gl_cv_host_cpu_c_abi_32bit=no
gt_cv_func_CFLocaleCopyPreferredLanguages=no
gt_cv_func_CFPreferencesCopyAppValue=no
gt_cv_func_gnugettext1_libc=yes
pkg_cv_ATKBRIDGE_CFLAGS='-I/usr/include/at-spi2-atk/2.0 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/at-spi-2.0 -I/usr/include/libmount -I/usr/include/blkid -I/usr/include/sysprof-6 -pthread -I/usr/include/atk-1.0 -I/usr/include/dbus-1.0 -I/usr/lib/dbus-1.0/include'
pkg_cv_ATKBRIDGE_LIBS=-latk-bridge-2.0
pkg_cv_ATSPI2_CFLAGS='-I/usr/include/at-spi-2.0 -I/usr/include/dbus-1.0 -I/usr/lib/dbus-1.0/include -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/libmount -I/usr/include/blkid -I/usr/include/sysprof-6 -pthread'
pkg_cv_ATSPI2_LIBS='-latspi -ldbus-1 -lglib-2.0'
pkg_cv_GSTREAMER_CFLAGS='-I/usr/include/gstreamer-1.0 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/sysprof-6 -pthread'
pkg_cv_GSTREAMER_LIBS='-lgstreamer-1.0 -lgobject-2.0 -lglib-2.0'
pkg_cv_PYGOBJECT_CFLAGS='-I/usr/include/pygobject-3.0 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/sysprof-6 -pthread'
pkg_cv_PYGOBJECT_LIBS='-lgobject-2.0 -lglib-2.0'
py_cv_mod_brlapi_=yes
py_cv_mod_gi_=yes
py_cv_mod_json_=yes
py_cv_mod_louis_=yes
py_cv_mod_speechd_=yes
## ----------------- ##
## Output variables. ##
## ----------------- ##
$(LN_S) -f "$(HELP_DIR)/C/$(HELP_ID)/$$f" "$$helpdir$$f" || exit 1; \
echo "$(LN_S) -f $(HELP_DIR)/C/$(HELP_ID)/$$f $$helpdir$$f"; \
$(INSTALL_DATA) "$$d$$lc/$$f" "$$helpdir$$f" || exit 1; \
echo "$(INSTALL_DATA) $$d$$lc/$$f $$helpdir$$f"; \
fi; \
if test "x$(YELP_LC_MEDIA_LINKS)" != "x"; then \
$(ITSTOOL) -o "$(notdir $@).tmp" $(_HELP_C_FILES) && \
$(ITSTOOL) -o "$(notdir $@).tmp" $(_HELP_C_FILES) && \
$(XMLLINT) --nonet --noout --noent --path "$$xmlpath" --xinclude "$$d$$lc/$$page"; \
cp -p "$$d$$lc/$$file" "$(distdir)/$$lc/" || exit 1; \
d="$(srcdir)/"; \
echo "$(XMLLINT) --nonet --noout --noent --path $$xmlpath --xinclude $$d$$lc/$$page"; \
echo "rm -f $$helpdir$$f"; \
elif test "x$$lc" != "xC"; then \
fi; \
helpdir="$(DESTDIR)$(HELP_DIR)/$$lc/$(HELP_ID)/"; \
helpdir="$(DESTDIR)$(HELP_DIR)/$$lc/$(HELP_ID)/"; \
if ! test -d "$$helpdir$$mdir"; then $(mkinstalldirs) "$$helpdir$$mdir"; fi; \
if test "x$mdir" = "x."; then mdir=""; fi; \
if test -f "$$d$$lc/$$f"; then \
if test -f "$$lc$$f"; then d=; else d="$(srcdir)/"; fi; \
if test -f "$$lc/$$file"; then d=./; else d=$(srcdir)/; fi; \
mdir=`dirname "$$f"`; \
msgmerge -o "$(notdir $@)" "$(notdir $@)" "$(notdir $@).tmp" && \
mv "$(notdir $@).tmp" "$(notdir $@)"); \
rm "$(notdir $@).tmp"); \
rm -f "$$helpdir$$f"; \
then d=; \
xmlpath="$$lc"; \
xmlpath="$$lc:$(srcdir)/$$lc"; \
$(INSTALL_DATA) "$$d$$f" "$$helpdir`basename $$f`" || exit 1; \
$(INSTALL_DATA) "$$d$$lc/$$f" "$$helpdir`basename $$f`" || exit 1; \
$(MKDIR_P) "$(distdir)/$$lc"; \
$(mkinstalldirs) "$(DESTDIR)$(HELP_DIR)/$$lc/$(HELP_ID)" || exit 1; \
(cd "$(dir $@)" && \
(cd "$(dir $@)" && \
done; \
done; \
done; \
done; \
echo "$(INSTALL_DATA) $$d$$f $$helpdir`basename $$f`"; \
echo "$(INSTALL_DATA) $$d$$lc/$$f $$helpdir`basename $$f`"; \
echo "rm -f $$helpdir`basename $$f`"; \
echo "rm -f $$helpdir`basename $$f`"; \
else \
fi; \
for file in $(HELP_FILES); do \
for lc in C $(_HELP_LINGUAS); do \
for lc in C $(_HELP_LINGUAS); do \
for page in $(HELP_FILES); do \
helpdir="$(DESTDIR)$(HELP_DIR)/$$lc/$(HELP_ID)/"; \
helpdir="$(DESTDIR)$(HELP_DIR)/$$lc/$(HELP_ID)/"; \
helpdir="$(DESTDIR)$(HELP_DIR)/$$lc/$(HELP_ID)/"; \
helpdir="$(DESTDIR)$(HELP_DIR)/$$lc/$(HELP_ID)/"; \
if ! test -d "$$helpdir"; then $(mkinstalldirs) "$$helpdir"; fi; \
if ! test -d "$$helpdir"; then $(mkinstalldirs) "$$helpdir"; fi; \
if test "x$(_HELP_V)" = "x0"; then echo " GEN $${po}"; fi; \
if test -d "$$lc"; \
if test -f "$$f"; then d=; else d="$(srcdir)/"; fi; \
if test -f "$$lc/$$f"; then d=; else d="$(srcdir)/"; fi; \
lc=`dirname "$$f"`; lc=`basename "$$lc"`; \
lc=`dirname "$$f"`; lc=`basename "$$lc"`; \
msgmerge -q -o "$${po}" "$${po}" "$(_HELP_POTFILE)"; \
rm -f "$$helpdir`basename $$f`"; \
rm -f "$$helpdir`basename $$f`"; \
$(AM_V_GEN)if ! test -f "$@"; then \
$(AM_V_GEN)if test -d "C"; then d=; else d="$(srcdir)/"; fi; \
$(AM_V_GEN)msgfmt -o "$@" "$<"
$(AM_V_at)for po in $(_HELP_POFILES); do \
$(AM_V_at)if ! test -d "$(dir $@)"; then mkdir "$(dir $@)"; fi
$(AM_V_at)if ! test -d "$(dir $@)"; then mkdir "$(dir $@)"; fi
$(AM_V_at)if ! test -d "$(dir $@)"; then mkdir "$(dir $@)"; fi
$(AM_V_at)if test ! -f "$@" -a -f "$(srcdir)/$@"; then cp "$(srcdir)/$@" "$@"; fi
$(ITSTOOL) -o "$@" $(foreach f,$(_HELP_C_FILES),"$${d}$(f)")
$(_HELP_LC_VERBOSE)if test -d "C"; then d="../"; else d="$(abs_srcdir)/"; fi; \
$(file >clean-help-files,$(_HELP_LC_FILES) $(_HELP_LC_STAMPS) $(_HELP_MOFILES))
(cd "$(dir $@)" && $(ITSTOOL) -m "$${mo}" $(foreach f,$(_HELP_C_FILES),$${d}/$(f))) && \
@for f in $(HELP_MEDIA); do \
@for f in $(HELP_MEDIA); do \
@for f in $(_HELP_C_EXTRA); do \
@for f in $(_HELP_C_EXTRA); do \
@for lc in C $(_HELP_LINGUAS); do \
@for lc in C $(_HELP_LINGUAS); do for f in $(HELP_FILES); do \
@for lc in C $(if $(YELP_LC_DIST),$(HELP_LINGUAS)) ; do \
@xargs -t rm -f < clean-help-files
done
done
done
done
done
done
done;
done; \
done; done
done; done
else \
fi
for lc in C $(_HELP_LINGUAS); do \
for lc in C $(_HELP_LINGUAS); do for f in $(HELP_FILES); do \
if test -f "$${mo}"; then mo="../$${mo}"; else mo="$(abs_srcdir)/$${mo}"; fi; \
mo="$(dir $@)$(patsubst %/$(notdir $@),%,$@).mo"; \
rm -f clean-help-files
touch "$@"
$(_HELP_LC_FILES): $(_HELP_LINGUAS)
$(_HELP_LC_STAMPS): $(_HELP_C_FILES) $(_HELP_C_EXTRA)
$(_HELP_LC_STAMPS): %.stamp: %.mo
$(_HELP_LINGUAS): $(_HELP_LC_STAMPS)
$(_HELP_MOFILES): %.mo: %.po
$(_HELP_POFILES):
$(_HELP_POTFILE): $(_HELP_C_FILES) $(_HELP_C_EXTRA) $(_HELP_C_MEDIA)
'
.PHONY: check-help
.PHONY: clean-help
.PHONY: install-help
.PHONY: pot
.PHONY: repo
.PHONY: uninstall-help
ACLOCAL='${SHELL} '\''/home/storm/orcatmp/orca/missing'\'' aclocal-1.17'
AMDEPBACKSLASH='\'
AMDEP_FALSE='#'
AMDEP_TRUE=''
AMTAR='$${TAR-tar}'
AM_BACKSLASH='\'
AM_DEFAULT_V='$(AM_DEFAULT_VERBOSITY)'
AM_DEFAULT_VERBOSITY='1'
AM_V='$(V)'
ATKBRIDGE_CFLAGS='-I/usr/include/at-spi2-atk/2.0 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/at-spi-2.0 -I/usr/include/libmount -I/usr/include/blkid -I/usr/include/sysprof-6 -pthread -I/usr/include/atk-1.0 -I/usr/include/dbus-1.0 -I/usr/lib/dbus-1.0/include'
ATKBRIDGE_LIBS='-latk-bridge-2.0'
ATSPI2_CFLAGS='-I/usr/include/at-spi-2.0 -I/usr/include/dbus-1.0 -I/usr/lib/dbus-1.0/include -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/libmount -I/usr/include/blkid -I/usr/include/sysprof-6 -pthread'
ATSPI2_LIBS='-latspi -ldbus-1 -lglib-2.0'
AUTOCONF='${SHELL} '\''/home/storm/orcatmp/orca/missing'\'' autoconf'
AUTOHEADER='${SHELL} '\''/home/storm/orcatmp/orca/missing'\'' autoheader'
AUTOMAKE='${SHELL} '\''/home/storm/orcatmp/orca/missing'\'' automake-1.17'
AWK='gawk'
CC='gcc'
CCDEPMODE='depmode=none'
CFLAGS='-g -O2'
CPP='gcc -E'
CPPFLAGS=''
CSCOPE='cscope'
CTAGS='ctags'
CYGPATH_W='echo'
DEFS='-DPACKAGE_NAME=\"orca\" -DPACKAGE_TARNAME=\"orca\" -DPACKAGE_VERSION=\"45.3\" -DPACKAGE_STRING=\"orca\ 45.3\" -DPACKAGE_BUGREPORT=\"https://gitlab.gnome.org/GNOME/orca/-/issues/\" -DPACKAGE_URL=\"\" -DPACKAGE=\"orca\" -DVERSION=\"45.3\" -DENABLE_NLS=1 -DHAVE_GETTEXT=1 -DHAVE_DCGETTEXT=1 -DGETTEXT_PACKAGE=\"orca\"'
DEPDIR='.deps'
ECHO_C=''
ECHO_N='-n'
ECHO_T=''
ETAGS='etags'
EXEEXT=''
EXTRA_DIST += $(_HELP_C_EXTRA) $(_HELP_C_MEDIA)
EXTRA_DIST += $(foreach f,$(HELP_MEDIA),$(foreach lc,$(HELP_LINGUAS),$(wildcard $(lc)/$(f))))
EXTRA_DIST += $(foreach lc,$(HELP_LINGUAS),$(lc)/$(lc).po)
EXTRA_DIST += $(if $(YELP_LC_DIST),$(foreach lc,$(HELP_LINGUAS),$(lc)/$(lc).stamp))
EXTRA_DIST ?=
GETTEXT_MACRO_VERSION='0.20'
GETTEXT_PACKAGE='orca'
GMSGFMT='/usr/bin/msgfmt'
GMSGFMT_015='/usr/bin/msgfmt'
GSTREAMER_CFLAGS='-I/usr/include/gstreamer-1.0 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/sysprof-6 -pthread'
GSTREAMER_LIBS='-lgstreamer-1.0 -lgobject-2.0 -lglib-2.0'
HELP_DIR='${datadir}/help'
HELP_EXTRA ?=
HELP_FILES ?=
HELP_ID ?=
HELP_LINGUAS ?=
HELP_MEDIA ?=
HELP_POT ?=
INSTALL_DATA='${INSTALL} -m 644'
INSTALL_PROGRAM='${INSTALL}'
INSTALL_SCRIPT='${INSTALL}'
INSTALL_STRIP_PROGRAM='$(install_sh) -c -s'
INTLLIBS=''
INTL_MACOSX_LIBS=''
ITSTOOL='itstool'
LDFLAGS=''
LIBICONV='-liconv'
LIBINTL=''
LIBOBJS=''
LIBS=''
LN_S='ln -s'
LOUIS_TABLE_DIR='/usr/share/liblouis/tables'
LTLIBICONV='-liconv'
LTLIBINTL=''
LTLIBOBJS=''
MAINT=''
MAINTAINER_MODE_FALSE='#'
MAINTAINER_MODE_TRUE=''
MAKEINFO='${SHELL} '\''/home/storm/orcatmp/orca/missing'\'' makeinfo'
MKDIR_P='/usr/bin/mkdir -p'
MSGFMT='/usr/bin/msgfmt'
MSGMERGE='/usr/bin/msgmerge'
MSGMERGE_FOR_MSGFMT_OPTION='--for-msgfmt'
OBJEXT='o'
PACKAGE='orca'
PACKAGE_BUGREPORT='https://gitlab.gnome.org/GNOME/orca/-/issues/'
PACKAGE_NAME='orca'
PACKAGE_STRING='orca 45.3'
PACKAGE_TARNAME='orca'
PACKAGE_URL=''
PACKAGE_VERSION='45.3'
PATH_SEPARATOR=':'
PKG_CONFIG='/usr/bin/pkg-config'
PKG_CONFIG_LIBDIR=''
PKG_CONFIG_PATH=''
PLATFORM_PATH=':/usr/bin:/usr/sbin:/bin'
POSUB='po'
PYGOBJECT_CFLAGS='-I/usr/include/pygobject-3.0 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/sysprof-6 -pthread'
PYGOBJECT_LIBS='-lgobject-2.0 -lglib-2.0'
PYTHON='/home/storm/.pyenv/shims/python'
PYTHON_EXEC_PREFIX='${exec_prefix}'
PYTHON_PLATFORM='linux'
PYTHON_PREFIX='${prefix}'
PYTHON_VERSION='3.12'
REVISION='fb25228b6'
SED='/usr/bin/sed'
SET_MAKE=''
SHELL='/bin/sh'
STRIP=''
USE_NLS='yes'
VERSION='45.3'
XGETTEXT='/usr/bin/xgettext'
XGETTEXT_015='/usr/bin/xgettext'
XGETTEXT_EXTRA_OPTIONS=''
XMLLINT='xmllint'
YELP_HELP_RULES='
YELP_LC_DIST='true'
YELP_LC_MEDIA_LINKS='true'
_HELP_C_EXTRA = $(foreach f,$(HELP_EXTRA),C/$(f))
_HELP_C_FILES = $(foreach f,$(HELP_FILES),C/$(f))
_HELP_C_MEDIA = $(foreach f,$(HELP_MEDIA),C/$(f))
_HELP_DEFAULT_V = $(if $(AM_DEFAULT_VERBOSITY),$(AM_DEFAULT_VERBOSITY),1)
_HELP_LC_FILES = $(foreach lc,$(_HELP_LINGUAS),$(foreach f,$(HELP_FILES),$(lc)/$(f)))
_HELP_LC_STAMPS = $(foreach lc,$(_HELP_LINGUAS),$(lc)/$(lc).stamp)
_HELP_LC_VERBOSE = $(_HELP_LC_VERBOSE_$(_HELP_V))
_HELP_LC_VERBOSE_ = $(_HELP_LC_VERBOSE_$(_HELP_DEFAULT_V))
_HELP_LC_VERBOSE_0 = @echo " GEN "$(dir $@);
_HELP_LINGUAS = $(if $(filter environment,$(origin LINGUAS)),$(filter $(LINGUAS),$(HELP_LINGUAS)),$(HELP_LINGUAS))
_HELP_MOFILES = $(patsubst %.po,%.mo,$(_HELP_POFILES))
_HELP_POFILES = $(if $(HELP_ID),$(foreach lc,$(_HELP_LINGUAS),$(lc)/$(lc).po))
_HELP_POTFILE = $(if $(HELP_POT),$(HELP_POT),$(if $(HELP_ID),$(HELP_ID).pot))
_HELP_V = $(if $(V),$(V),$(_HELP_DEFAULT_V))
ac_ct_CC='gcc'
all: $(_HELP_C_FILES) $(_HELP_C_EXTRA) $(_HELP_C_MEDIA) $(_HELP_LC_FILES) $(_HELP_POFILES)
am__EXEEXT_FALSE=''
am__EXEEXT_TRUE='#'
am__fastdepCC_FALSE=''
am__fastdepCC_TRUE='#'
am__include='include'
am__isrc=''
am__leading_dot='.'
am__nodep='_no'
am__quote=''
am__rm_f_notfound=''
am__tar='tar --format=ustar -chf - "$$tardir"'
am__untar='tar -xf -'
am__xargs_n='xargs -n'
bindir='${exec_prefix}/bin'
build='x86_64-pc-linux-gnu'
build_alias=''
build_cpu='x86_64'
build_os='linux-gnu'
build_vendor='pc'
check-help:
check: check-help
clean-help:
datadir='${datarootdir}'
datarootdir='${prefix}/share'
distdir-help-files: $(_HELP_LC_FILES)
distdir: distdir-help-files
docdir='${datarootdir}/doc/${PACKAGE_TARNAME}'
dvidir='${docdir}'
exec_prefix='${prefix}'
host='x86_64-pc-linux-gnu'
host_alias=''
host_cpu='x86_64'
host_os='linux-gnu'
host_vendor='pc'
htmldir='${docdir}'
includedir='${prefix}/include'
infodir='${datarootdir}/info'
install-data-am: $(if $(HELP_ID),install-help)
install-help: $(_HELP_LC_FILES)
install_sh='${SHELL} /home/storm/orcatmp/orca/install-sh'
libdir='${exec_prefix}/lib'
libexecdir='${exec_prefix}/libexec'
localedir='${datarootdir}/locale'
localedir_c='"/usr/local/share/locale"'
localedir_c_make='\"$(localedir)\"'
localstatedir='/var'
mandir='${datarootdir}/man'
mkdir_p='$(MKDIR_P)'
mostlyclean-am: $(if $(HELP_ID),clean-help)
oldincludedir='/usr/include'
pdfdir='${docdir}'
pkgpyexecdir='${pyexecdir}/orca'
pkgpythondir='${pythondir}/orca'
pot: $(_HELP_POTFILE)
prefix='/usr/local'
program_transform_name='s,x,x,'
psdir='${docdir}'
pyexecdir='${PYTHON_EXEC_PREFIX}/lib/python3.12/site-packages'
pythondir='${PYTHON_PREFIX}/lib/python3.12/site-packages'
repo: $(_HELP_POTFILE)
runstatedir='${localstatedir}/run'
sbindir='${exec_prefix}/sbin'
sharedstatedir='${prefix}/com'
sysconfdir='/etc'
target_alias=''
uninstall-am: $(if $(HELP_ID),uninstall-help)
uninstall-help:
## ----------- ##
## confdefs.h. ##
## ----------- ##
/* confdefs.h */
#define PACKAGE_NAME "orca"
#define PACKAGE_TARNAME "orca"
#define PACKAGE_VERSION "45.3"
#define PACKAGE_STRING "orca 45.3"
#define PACKAGE_BUGREPORT "https://gitlab.gnome.org/GNOME/orca/-/issues/"
#define PACKAGE_URL ""
#define PACKAGE "orca"
#define VERSION "45.3"
#define ENABLE_NLS 1
#define HAVE_GETTEXT 1
#define HAVE_DCGETTEXT 1
#define GETTEXT_PACKAGE "orca"
configure: exit 0

684
config.rpath Executable file
View File

@ -0,0 +1,684 @@
#! /bin/sh
# Output a system dependent set of variables, describing how to set the
# run time search path of shared libraries in an executable.
#
# Copyright 1996-2024 Free Software Foundation, Inc.
# Taken from GNU libtool, 2001
# Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
#
# This file is free software; the Free Software Foundation gives
# unlimited permission to copy and/or distribute it, with or without
# modifications, as long as this notice is preserved.
#
# The first argument passed to this file is the canonical host specification,
# CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM
# or
# CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM
# The environment variables CC, GCC, LDFLAGS, LD, with_gnu_ld
# should be set by the caller.
#
# The set of defined variables is at the end of this script.
# Known limitations:
# - On IRIX 6.5 with CC="cc", the run time search patch must not be longer
# than 256 bytes, otherwise the compiler driver will dump core. The only
# known workaround is to choose shorter directory names for the build
# directory and/or the installation directory.
# All known linkers require a '.a' archive for static linking (except MSVC,
# which needs '.lib').
libext=a
shrext=.so
host="$1"
host_cpu=`echo "$host" | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
host_vendor=`echo "$host" | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
host_os=`echo "$host" | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
# Code taken from libtool.m4's _LT_CC_BASENAME.
for cc_temp in $CC""; do
case $cc_temp in
compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
\-*) ;;
*) break;;
esac
done
cc_basename=`echo "$cc_temp" | sed -e 's%^.*/%%'`
# Code taken from libtool.m4's _LT_COMPILER_PIC.
wl=
if test "$GCC" = yes; then
wl='-Wl,'
else
case "$host_os" in
aix*)
wl='-Wl,'
;;
mingw* | cygwin* | pw32* | os2* | cegcc*)
;;
hpux9* | hpux10* | hpux11*)
wl='-Wl,'
;;
irix5* | irix6* | nonstopux*)
wl='-Wl,'
;;
linux* | k*bsd*-gnu | kopensolaris*-gnu)
case $cc_basename in
ecc*)
wl='-Wl,'
;;
icc* | ifort*)
wl='-Wl,'
;;
lf95*)
wl='-Wl,'
;;
nagfor*)
wl='-Wl,-Wl,,'
;;
pgcc* | pgf77* | pgf90* | pgf95* | pgfortran*)
wl='-Wl,'
;;
ccc*)
wl='-Wl,'
;;
xl* | bgxl* | bgf* | mpixl*)
wl='-Wl,'
;;
como)
wl='-lopt='
;;
*)
case `$CC -V 2>&1 | sed 5q` in
*Sun\ F* | *Sun*Fortran*)
wl=
;;
*Sun\ C*)
wl='-Wl,'
;;
esac
;;
esac
;;
newsos6)
;;
*nto* | *qnx*)
;;
osf3* | osf4* | osf5*)
wl='-Wl,'
;;
rdos*)
;;
solaris*)
case $cc_basename in
f77* | f90* | f95* | sunf77* | sunf90* | sunf95*)
wl='-Qoption ld '
;;
*)
wl='-Wl,'
;;
esac
;;
sunos4*)
wl='-Qoption ld '
;;
sysv4 | sysv4.2uw2* | sysv4.3*)
wl='-Wl,'
;;
sysv4*MP*)
;;
sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
wl='-Wl,'
;;
unicos*)
wl='-Wl,'
;;
uts4*)
;;
esac
fi
# Code taken from libtool.m4's _LT_LINKER_SHLIBS.
hardcode_libdir_flag_spec=
hardcode_libdir_separator=
hardcode_direct=no
hardcode_minus_L=no
case "$host_os" in
cygwin* | mingw* | pw32* | cegcc*)
# FIXME: the MSVC++ port hasn't been tested in a loooong time
# When not using gcc, we currently assume that we are using
# Microsoft Visual C++.
if test "$GCC" != yes; then
with_gnu_ld=no
fi
;;
interix*)
# we just hope/assume this is gcc and not c89 (= MSVC++)
with_gnu_ld=yes
;;
openbsd*)
with_gnu_ld=no
;;
esac
ld_shlibs=yes
if test "$with_gnu_ld" = yes; then
# Set some defaults for GNU ld with shared library support. These
# are reset later if shared libraries are not supported. Putting them
# here allows them to be overridden if necessary.
# Unlike libtool, we use -rpath here, not --rpath, since the documented
# option of GNU ld is called -rpath, not --rpath.
hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
case "$host_os" in
aix[3-9]*)
# On AIX/PPC, the GNU linker is very broken
if test "$host_cpu" != ia64; then
ld_shlibs=no
fi
;;
amigaos*)
case "$host_cpu" in
powerpc)
;;
m68k)
hardcode_libdir_flag_spec='-L$libdir'
hardcode_minus_L=yes
;;
esac
;;
beos*)
if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
:
else
ld_shlibs=no
fi
;;
cygwin* | mingw* | pw32* | cegcc*)
# hardcode_libdir_flag_spec is actually meaningless, as there is
# no search path for DLLs.
hardcode_libdir_flag_spec='-L$libdir'
if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then
:
else
ld_shlibs=no
fi
;;
haiku*)
;;
interix[3-9]*)
hardcode_direct=no
hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
;;
gnu* | linux* | tpf* | k*bsd*-gnu | kopensolaris*-gnu)
if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
:
else
ld_shlibs=no
fi
;;
netbsd*)
;;
solaris*)
if $LD -v 2>&1 | grep 'BFD 2\.8' > /dev/null; then
ld_shlibs=no
elif $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
:
else
ld_shlibs=no
fi
;;
sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*)
case `$LD -v 2>&1` in
*\ [01].* | *\ 2.[0-9].* | *\ 2.1[0-5].*)
ld_shlibs=no
;;
*)
if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
hardcode_libdir_flag_spec='`test -z "$SCOABSPATH" && echo ${wl}-rpath,$libdir`'
else
ld_shlibs=no
fi
;;
esac
;;
sunos4*)
hardcode_direct=yes
;;
*)
if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
:
else
ld_shlibs=no
fi
;;
esac
if test "$ld_shlibs" = no; then
hardcode_libdir_flag_spec=
fi
else
case "$host_os" in
aix3*)
# Note: this linker hardcodes the directories in LIBPATH if there
# are no directories specified by -L.
hardcode_minus_L=yes
if test "$GCC" = yes; then
# Neither direct hardcoding nor static linking is supported with a
# broken collect2.
hardcode_direct=unsupported
fi
;;
aix[4-9]*)
if test "$host_cpu" = ia64; then
# On IA64, the linker does run time linking by default, so we don't
# have to do anything special.
aix_use_runtimelinking=no
else
aix_use_runtimelinking=no
# Test if we are trying to use run time linking or normal
# AIX style linking. If -brtl is somewhere in LDFLAGS, we
# need to do runtime linking.
case $host_os in aix4.[23]|aix4.[23].*|aix[5-9]*)
for ld_flag in $LDFLAGS; do
if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then
aix_use_runtimelinking=yes
break
fi
done
;;
esac
fi
hardcode_direct=yes
hardcode_libdir_separator=':'
if test "$GCC" = yes; then
case $host_os in aix4.[012]|aix4.[012].*)
collect2name=`${CC} -print-prog-name=collect2`
if test -f "$collect2name" && \
strings "$collect2name" | grep resolve_lib_name >/dev/null
then
# We have reworked collect2
:
else
# We have old collect2
hardcode_direct=unsupported
hardcode_minus_L=yes
hardcode_libdir_flag_spec='-L$libdir'
hardcode_libdir_separator=
fi
;;
esac
fi
# Begin _LT_AC_SYS_LIBPATH_AIX.
echo 'int main () { return 0; }' > conftest.c
${CC} ${LDFLAGS} conftest.c -o conftest
aix_libpath=`dump -H conftest 2>/dev/null | sed -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; }
}'`
if test -z "$aix_libpath"; then
aix_libpath=`dump -HX64 conftest 2>/dev/null | sed -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; }
}'`
fi
if test -z "$aix_libpath"; then
aix_libpath="/usr/lib:/lib"
fi
rm -f conftest.c conftest
# End _LT_AC_SYS_LIBPATH_AIX.
if test "$aix_use_runtimelinking" = yes; then
hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath"
else
if test "$host_cpu" = ia64; then
hardcode_libdir_flag_spec='${wl}-R $libdir:/usr/lib:/lib'
else
hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath"
fi
fi
;;
amigaos*)
case "$host_cpu" in
powerpc)
;;
m68k)
hardcode_libdir_flag_spec='-L$libdir'
hardcode_minus_L=yes
;;
esac
;;
bsdi[45]*)
;;
cygwin* | mingw* | pw32* | cegcc*)
# When not using gcc, we currently assume that we are using
# Microsoft Visual C++.
# hardcode_libdir_flag_spec is actually meaningless, as there is
# no search path for DLLs.
hardcode_libdir_flag_spec=' '
libext=lib
;;
darwin* | rhapsody*)
hardcode_direct=no
if { case $cc_basename in ifort*) true;; *) test "$GCC" = yes;; esac; }; then
:
else
ld_shlibs=no
fi
;;
dgux*)
hardcode_libdir_flag_spec='-L$libdir'
;;
freebsd2.[01]*)
hardcode_direct=yes
hardcode_minus_L=yes
;;
freebsd* | dragonfly* | midnightbsd*)
hardcode_libdir_flag_spec='-R$libdir'
hardcode_direct=yes
;;
hpux9*)
hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
hardcode_libdir_separator=:
hardcode_direct=yes
# hardcode_minus_L: Not really in the search PATH,
# but as the default location of the library.
hardcode_minus_L=yes
;;
hpux10*)
if test "$with_gnu_ld" = no; then
hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
hardcode_libdir_separator=:
hardcode_direct=yes
# hardcode_minus_L: Not really in the search PATH,
# but as the default location of the library.
hardcode_minus_L=yes
fi
;;
hpux11*)
if test "$with_gnu_ld" = no; then
hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
hardcode_libdir_separator=:
case $host_cpu in
hppa*64*|ia64*)
hardcode_direct=no
;;
*)
hardcode_direct=yes
# hardcode_minus_L: Not really in the search PATH,
# but as the default location of the library.
hardcode_minus_L=yes
;;
esac
fi
;;
irix5* | irix6* | nonstopux*)
hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
hardcode_libdir_separator=:
;;
netbsd*)
hardcode_libdir_flag_spec='-R$libdir'
hardcode_direct=yes
;;
newsos6)
hardcode_direct=yes
hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
hardcode_libdir_separator=:
;;
*nto* | *qnx*)
;;
openbsd*)
if test -f /usr/libexec/ld.so; then
hardcode_direct=yes
if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
else
case "$host_os" in
openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*)
hardcode_libdir_flag_spec='-R$libdir'
;;
*)
hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
;;
esac
fi
else
ld_shlibs=no
fi
;;
os2*)
hardcode_libdir_flag_spec='-L$libdir'
hardcode_minus_L=yes
;;
osf3*)
hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
hardcode_libdir_separator=:
;;
osf4* | osf5*)
if test "$GCC" = yes; then
hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
else
# Both cc and cxx compiler support -rpath directly
hardcode_libdir_flag_spec='-rpath $libdir'
fi
hardcode_libdir_separator=:
;;
solaris*)
hardcode_libdir_flag_spec='-R$libdir'
;;
sunos4*)
hardcode_libdir_flag_spec='-L$libdir'
hardcode_direct=yes
hardcode_minus_L=yes
;;
sysv4)
case $host_vendor in
sni)
hardcode_direct=yes # is this really true???
;;
siemens)
hardcode_direct=no
;;
motorola)
hardcode_direct=no #Motorola manual says yes, but my tests say they lie
;;
esac
;;
sysv4.3*)
;;
sysv4*MP*)
if test -d /usr/nec; then
ld_shlibs=yes
fi
;;
sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7* | sco3.2v5.0.[024]*)
;;
sysv5* | sco3.2v5* | sco5v6*)
hardcode_libdir_flag_spec='`test -z "$SCOABSPATH" && echo ${wl}-R,$libdir`'
hardcode_libdir_separator=':'
;;
uts4*)
hardcode_libdir_flag_spec='-L$libdir'
;;
*)
ld_shlibs=no
;;
esac
fi
# Check dynamic linker characteristics
# Code taken from libtool.m4's _LT_SYS_DYNAMIC_LINKER.
# Unlike libtool.m4, here we don't care about _all_ names of the library, but
# only about the one the linker finds when passed -lNAME. This is the last
# element of library_names_spec in libtool.m4, or possibly two of them if the
# linker has special search rules.
library_names_spec= # the last element of library_names_spec in libtool.m4
libname_spec='lib$name'
case "$host_os" in
aix3*)
library_names_spec='$libname.a'
;;
aix[4-9]*)
library_names_spec='$libname$shrext'
;;
amigaos*)
case "$host_cpu" in
powerpc*)
library_names_spec='$libname$shrext' ;;
m68k)
library_names_spec='$libname.a' ;;
esac
;;
beos*)
library_names_spec='$libname$shrext'
;;
bsdi[45]*)
library_names_spec='$libname$shrext'
;;
cygwin* | mingw* | pw32* | cegcc*)
shrext=.dll
library_names_spec='$libname.dll.a $libname.lib'
;;
darwin* | rhapsody*)
shrext=.dylib
library_names_spec='$libname$shrext'
;;
dgux*)
library_names_spec='$libname$shrext'
;;
freebsd[23].*)
library_names_spec='$libname$shrext$versuffix'
;;
freebsd* | dragonfly* | midnightbsd*)
library_names_spec='$libname$shrext'
;;
gnu*)
library_names_spec='$libname$shrext'
;;
haiku*)
library_names_spec='$libname$shrext'
;;
hpux9* | hpux10* | hpux11*)
case $host_cpu in
ia64*)
shrext=.so
;;
hppa*64*)
shrext=.sl
;;
*)
shrext=.sl
;;
esac
library_names_spec='$libname$shrext'
;;
interix[3-9]*)
library_names_spec='$libname$shrext'
;;
irix5* | irix6* | nonstopux*)
library_names_spec='$libname$shrext'
case "$host_os" in
irix5* | nonstopux*)
libsuff= shlibsuff=
;;
*)
case $LD in
*-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ") libsuff= shlibsuff= ;;
*-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ") libsuff=32 shlibsuff=N32 ;;
*-64|*"-64 "|*-melf64bmip|*"-melf64bmip ") libsuff=64 shlibsuff=64 ;;
*) libsuff= shlibsuff= ;;
esac
;;
esac
;;
linux*oldld* | linux*aout* | linux*coff*)
;;
linux* | k*bsd*-gnu | kopensolaris*-gnu)
library_names_spec='$libname$shrext'
;;
knetbsd*-gnu)
library_names_spec='$libname$shrext'
;;
netbsd*)
library_names_spec='$libname$shrext'
;;
newsos6)
library_names_spec='$libname$shrext'
;;
*nto* | *qnx*)
library_names_spec='$libname$shrext'
;;
openbsd*)
library_names_spec='$libname$shrext$versuffix'
;;
os2*)
libname_spec='$name'
shrext=.dll
library_names_spec='$libname.a'
;;
osf3* | osf4* | osf5*)
library_names_spec='$libname$shrext'
;;
rdos*)
;;
solaris*)
library_names_spec='$libname$shrext'
;;
sunos4*)
library_names_spec='$libname$shrext$versuffix'
;;
sysv4 | sysv4.3*)
library_names_spec='$libname$shrext'
;;
sysv4*MP*)
library_names_spec='$libname$shrext'
;;
sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
library_names_spec='$libname$shrext'
;;
tpf*)
library_names_spec='$libname$shrext'
;;
uts4*)
library_names_spec='$libname$shrext'
;;
esac
sed_quote_subst='s/\(["`$\\]\)/\\\1/g'
escaped_wl=`echo "X$wl" | sed -e 's/^X//' -e "$sed_quote_subst"`
shlibext=`echo "$shrext" | sed -e 's,^\.,,'`
escaped_libname_spec=`echo "X$libname_spec" | sed -e 's/^X//' -e "$sed_quote_subst"`
escaped_library_names_spec=`echo "X$library_names_spec" | sed -e 's/^X//' -e "$sed_quote_subst"`
escaped_hardcode_libdir_flag_spec=`echo "X$hardcode_libdir_flag_spec" | sed -e 's/^X//' -e "$sed_quote_subst"`
LC_ALL=C sed -e 's/^\([a-zA-Z0-9_]*\)=/acl_cv_\1=/' <<EOF
# How to pass a linker flag through the compiler.
wl="$escaped_wl"
# Static library suffix (normally "a").
libext="$libext"
# Shared library suffix (normally "so").
shlibext="$shlibext"
# Format of library name prefix.
libname_spec="$escaped_libname_spec"
# Library names that the linker finds when passed -lNAME.
library_names_spec="$escaped_library_names_spec"
# Flag to hardcode \$libdir into a binary during linking.
# This must work even if \$libdir does not exist.
hardcode_libdir_flag_spec="$escaped_hardcode_libdir_flag_spec"
# Whether we need a single -rpath flag with a separated argument.
hardcode_libdir_separator="$hardcode_libdir_separator"
# Set to yes if using DIR/libNAME.so during linking hardcodes DIR into the
# resulting binary.
hardcode_direct="$hardcode_direct"
# Set to yes if using the -LDIR flag during linking hardcodes DIR into the
# resulting binary.
hardcode_minus_L="$hardcode_minus_L"
EOF

1456
config.status Executable file

File diff suppressed because it is too large Load Diff

1971
config.sub vendored Executable file

File diff suppressed because it is too large Load Diff

1884
config.sub~ Executable file

File diff suppressed because it is too large Load Diff

10661
configure vendored Executable file

File diff suppressed because it is too large Load Diff

153
configure.ac Normal file
View File

@ -0,0 +1,153 @@
m4_define([orca_version], [45.3])
m4_define(pygobject_required_version, 3.18)
m4_define(atspi_required_version, 2.48)
m4_define(atkbridge_required_version, 2.26)
AC_INIT([orca],[orca_version],[https://gitlab.gnome.org/GNOME/orca/-/issues/],[orca])
AC_CONFIG_MACRO_DIR([m4])
AM_INIT_AUTOMAKE([1.11 tar-ustar no-dist-gzip dist-xz])
AM_MAINTAINER_MODE([enable])
dnl Gettext stuff
# FIXME: Remove AM_GNU_GETTEXT_VERSION once autoreconf supports REQUIRE_VERSION
AM_GNU_GETTEXT_VERSION([0.19.8])
AM_GNU_GETTEXT_REQUIRE_VERSION([0.19.8])
AM_GNU_GETTEXT([external])
GETTEXT_PACKAGE=AC_PACKAGE_TARNAME
AC_SUBST(GETTEXT_PACKAGE)
AC_DEFINE_UNQUOTED(GETTEXT_PACKAGE,"$GETTEXT_PACKAGE", [gettext package])
# User Documentation
YELP_HELP_INIT
PKG_CHECK_MODULES([PYGOBJECT], [pygobject-3.0 >= pygobject_required_version])
PKG_CHECK_MODULES([ATSPI2], [atspi-2 >= atspi_required_version])
PKG_CHECK_MODULES([ATKBRIDGE], [atk-bridge-2.0 >= atkbridge_required_version])
PKG_CHECK_MODULES([GSTREAMER], [gstreamer-1.0], [gstreamer="yes"], [gstreamer="no"])
dnl Needed programs
AC_PROG_INSTALL
dnl Check for python and python modules needed by Orca
dnl TODO: check for incompatibilities between Orca and liblouis
dnl per http://live.gnome.org/Orca/Braille
AM_PATH_PYTHON(3.3)
# Don't require the DISPLAY to be set - the gtk checking will fail
# if DISPLAY is not set, and we don't like that.
AM_CHECK_PYMOD(gi,,,[AC_MSG_ERROR(Could not find python module: gi)])
AM_CHECK_PYMOD(json,,,[AC_MSG_ERROR(Could not find python module: json)])
AM_CHECK_PYMOD(brlapi,,[brlapi_available="yes"],[brlapi_available="no"])
AM_CHECK_PYMOD(speechd,,[speechd_available="yes"],[speechd_available="no"])
AC_ARG_WITH([liblouis],
AS_HELP_STRING([--without-liblouis], [Disable liblouis support]))
AS_IF([test "x$with_liblouis" != xno],
[AM_CHECK_PYMOD(louis,,[louis_available="yes"],[louis_available="no"])],
[louis_available=no])
if test "x$with_liblouis" = xyes -a "x$louis_available" = xno; then
AC_MSG_ERROR([Liblouis was requested but could not be found])
fi
LOUIS_TABLE_DIR=""
if test x$louis_available = "xyes"; then
LOUIS_TABLE_DIR=`pkg-config --variable=tablesdir liblouis`
fi
AC_SUBST(LOUIS_TABLE_DIR)
REVISION=`git rev-parse --short HEAD 2> /dev/null`
AC_SUBST(REVISION)
dnl Check for the OS. On *Solaris systems the PATH must be set
PLATFORM=`uname -a`
case "${PLATFORM}" in
*SunOS*)
PLATFORM_PATH=":/usr/ccs/bin:/usr/bin:/usr/sbin:/bin:/usr/sfw/bin:/usr/openwin/bin:/usr/X11R6/bin"
;;
*Linux*)
PLATFORM_PATH=":/usr/bin:/usr/sbin:/bin"
;;
esac
AC_SUBST(PLATFORM_PATH)
AC_CONFIG_FILES([
Makefile
docs/Makefile
docs/man/Makefile
po/Makefile.in
help/Makefile
icons/Makefile
src/Makefile
src/orca/Makefile
src/orca/scripts/Makefile
src/orca/scripts/apps/Makefile
src/orca/scripts/apps/Banshee/Makefile
src/orca/scripts/apps/Eclipse/Makefile
src/orca/scripts/apps/epiphany/Makefile
src/orca/scripts/apps/evince/Makefile
src/orca/scripts/apps/evolution/Makefile
src/orca/scripts/apps/gajim/Makefile
src/orca/scripts/apps/gcalctool/Makefile
src/orca/scripts/apps/gedit/Makefile
src/orca/scripts/apps/gnome-documents/Makefile
src/orca/scripts/apps/gnome-shell/Makefile
src/orca/scripts/apps/kwin/Makefile
src/orca/scripts/apps/notification-daemon/Makefile
src/orca/scripts/apps/notify-osd/Makefile
src/orca/scripts/apps/pidgin/Makefile
src/orca/scripts/apps/soffice/Makefile
src/orca/scripts/apps/SeaMonkey/Makefile
src/orca/scripts/apps/smuxi-frontend-gnome/Makefile
src/orca/scripts/apps/Thunderbird/Makefile
src/orca/scripts/apps/xfwm4/Makefile
src/orca/scripts/switcher/Makefile
src/orca/scripts/terminal/Makefile
src/orca/scripts/web/Makefile
src/orca/scripts/toolkits/Makefile
src/orca/scripts/toolkits/Chromium/Makefile
src/orca/scripts/toolkits/Gecko/Makefile
src/orca/scripts/toolkits/J2SE-access-bridge/Makefile
src/orca/scripts/toolkits/clutter/Makefile
src/orca/scripts/toolkits/GAIL/Makefile
src/orca/scripts/toolkits/Qt/Makefile
src/orca/scripts/toolkits/WebKitGtk/Makefile
src/orca/scripts/toolkits/gtk/Makefile
src/orca/backends/Makefile
src/orca/orca_bin.py
src/orca/orca_i18n.py
src/orca/orca_platform.py
])
AC_CONFIG_COMMANDS([default],[cp src/orca/orca_bin.py src/orca/orca],[])
AC_OUTPUT
if test "x$brlapi_available" = "xno" ; then
echo
echo "NOTE: Braille support requires BrlTTY >= 3.9 and BrlAPI >= 0.5.1."
fi
if test "x$wnck_available" = "xno" ; then
echo
echo "NOTE: Mouse review requires wnck, which was not found."
fi
if test "x$speechd_available" = "xno" ; then
echo
echo "NOTE: Speech support requires speech-dispatcher >= 0.8."
fi
if test "x$gstreamer" = "xno" ; then
echo
echo "NOTE: Sound support requires gstreamer-1.0."
fi
echo
echo Use speech-dispatcher: $speechd_available
echo Use brltty: $brlapi_available
echo Use liblouis: $louis_available
echo Use gstreamer: $gstreamer
echo

10661
configure~ Executable file

File diff suppressed because it is too large Load Diff

655
docs/Makefile Normal file
View File

@ -0,0 +1,655 @@
# Makefile.in generated by automake 1.17 from Makefile.am.
# docs/Makefile. Generated from Makefile.in by configure.
# Copyright (C) 1994-2024 Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.
am__is_gnu_make = { \
if test -z '$(MAKELEVEL)'; then \
false; \
elif test -n '$(MAKE_HOST)'; then \
true; \
elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
true; \
else \
false; \
fi; \
}
am__make_running_with_option = \
case $${target_option-} in \
?) ;; \
*) echo "am__make_running_with_option: internal error: invalid" \
"target option '$${target_option-}' specified" >&2; \
exit 1;; \
esac; \
has_opt=no; \
sane_makeflags=$$MAKEFLAGS; \
if $(am__is_gnu_make); then \
sane_makeflags=$$MFLAGS; \
else \
case $$MAKEFLAGS in \
*\\[\ \ ]*) \
bs=\\; \
sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
| sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \
esac; \
fi; \
skip_next=no; \
strip_trailopt () \
{ \
flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
}; \
for flg in $$sane_makeflags; do \
test $$skip_next = yes && { skip_next=no; continue; }; \
case $$flg in \
*=*|--*) continue;; \
-*I) strip_trailopt 'I'; skip_next=yes;; \
-*I?*) strip_trailopt 'I';; \
-*O) strip_trailopt 'O'; skip_next=yes;; \
-*O?*) strip_trailopt 'O';; \
-*l) strip_trailopt 'l'; skip_next=yes;; \
-*l?*) strip_trailopt 'l';; \
-[dEDm]) skip_next=yes;; \
-[JT]) skip_next=yes;; \
esac; \
case $$flg in \
*$$target_option*) has_opt=yes; break;; \
esac; \
done; \
test $$has_opt = yes
am__make_dryrun = (target_option=n; $(am__make_running_with_option))
am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
am__rm_f = rm -f $(am__rm_f_notfound)
am__rm_rf = rm -rf $(am__rm_f_notfound)
pkgdatadir = $(datadir)/orca
pkgincludedir = $(includedir)/orca
pkglibdir = $(libdir)/orca
pkglibexecdir = $(libexecdir)/orca
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
INSTALL_HEADER = $(INSTALL_DATA)
transform = $(program_transform_name)
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
build_triplet = x86_64-pc-linux-gnu
host_triplet = x86_64-pc-linux-gnu
subdir = docs
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/m4/build-to-host.m4 \
$(top_srcdir)/m4/gettext.m4 $(top_srcdir)/m4/host-cpu-c-abi.m4 \
$(top_srcdir)/m4/iconv.m4 $(top_srcdir)/m4/intlmacosx.m4 \
$(top_srcdir)/m4/lib-ld.m4 $(top_srcdir)/m4/lib-link.m4 \
$(top_srcdir)/m4/lib-prefix.m4 $(top_srcdir)/m4/nls.m4 \
$(top_srcdir)/m4/pkg.m4 $(top_srcdir)/m4/po.m4 \
$(top_srcdir)/m4/progtest.m4 $(top_srcdir)/m4/yelp.m4 \
$(top_srcdir)/acinclude.m4 $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON)
mkinstalldirs = $(install_sh) -d
CONFIG_CLEAN_FILES =
CONFIG_CLEAN_VPATH_FILES =
AM_V_P = $(am__v_P_$(V))
am__v_P_ = $(am__v_P_$(AM_DEFAULT_VERBOSITY))
am__v_P_0 = false
am__v_P_1 = :
AM_V_GEN = $(am__v_GEN_$(V))
am__v_GEN_ = $(am__v_GEN_$(AM_DEFAULT_VERBOSITY))
am__v_GEN_0 = @echo " GEN " $@;
am__v_GEN_1 =
AM_V_at = $(am__v_at_$(V))
am__v_at_ = $(am__v_at_$(AM_DEFAULT_VERBOSITY))
am__v_at_0 = @
am__v_at_1 =
SOURCES =
DIST_SOURCES =
RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \
ctags-recursive dvi-recursive html-recursive info-recursive \
install-data-recursive install-dvi-recursive \
install-exec-recursive install-html-recursive \
install-info-recursive install-pdf-recursive \
install-ps-recursive install-recursive installcheck-recursive \
installdirs-recursive pdf-recursive ps-recursive \
tags-recursive uninstall-recursive
am__can_run_installinfo = \
case $$AM_UPDATE_INFO_DIR in \
n|no|NO) false;; \
*) (install-info --version) >/dev/null 2>&1;; \
esac
RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \
distclean-recursive maintainer-clean-recursive
am__recursive_targets = \
$(RECURSIVE_TARGETS) \
$(RECURSIVE_CLEAN_TARGETS) \
$(am__extra_recursive_targets)
AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \
distdir distdir-am
am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
# Read a list of newline-separated strings from the standard input,
# and print each of them once, without duplicates. Input order is
# *not* preserved.
am__uniquify_input = $(AWK) '\
BEGIN { nonempty = 0; } \
{ items[$$0] = 1; nonempty = 1; } \
END { if (nonempty) { for (i in items) print i; }; } \
'
# Make sure the list of sources is unique. This is necessary because,
# e.g., the same source file might be shared among _SOURCES variables
# for different programs/libraries.
am__define_uniq_tagged_files = \
list='$(am__tagged_files)'; \
unique=`for i in $$list; do \
if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
done | $(am__uniquify_input)`
DIST_SUBDIRS = $(SUBDIRS)
am__DIST_COMMON = $(srcdir)/Makefile.in
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
am__relativize = \
dir0=`pwd`; \
sed_first='s,^\([^/]*\)/.*$$,\1,'; \
sed_rest='s,^[^/]*/*,,'; \
sed_last='s,^.*/\([^/]*\)$$,\1,'; \
sed_butlast='s,/*[^/]*$$,,'; \
while test -n "$$dir1"; do \
first=`echo "$$dir1" | sed -e "$$sed_first"`; \
if test "$$first" != "."; then \
if test "$$first" = ".."; then \
dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
else \
first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
if test "$$first2" = "$$first"; then \
dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
else \
dir2="../$$dir2"; \
fi; \
dir0="$$dir0"/"$$first"; \
fi; \
fi; \
dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
done; \
reldir="$$dir2"
ACLOCAL = ${SHELL} '/home/storm/orcatmp/orca/missing' aclocal-1.17
AMTAR = $${TAR-tar}
AM_DEFAULT_VERBOSITY = 1
ATKBRIDGE_CFLAGS = -I/usr/include/at-spi2-atk/2.0 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/at-spi-2.0 -I/usr/include/libmount -I/usr/include/blkid -I/usr/include/sysprof-6 -pthread -I/usr/include/atk-1.0 -I/usr/include/dbus-1.0 -I/usr/lib/dbus-1.0/include
ATKBRIDGE_LIBS = -latk-bridge-2.0
ATSPI2_CFLAGS = -I/usr/include/at-spi-2.0 -I/usr/include/dbus-1.0 -I/usr/lib/dbus-1.0/include -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/libmount -I/usr/include/blkid -I/usr/include/sysprof-6 -pthread
ATSPI2_LIBS = -latspi -ldbus-1 -lglib-2.0
AUTOCONF = ${SHELL} '/home/storm/orcatmp/orca/missing' autoconf
AUTOHEADER = ${SHELL} '/home/storm/orcatmp/orca/missing' autoheader
AUTOMAKE = ${SHELL} '/home/storm/orcatmp/orca/missing' automake-1.17
AWK = gawk
CC = gcc
CCDEPMODE = depmode=none
CFLAGS = -g -O2
CPP = gcc -E
CPPFLAGS =
CSCOPE = cscope
CTAGS = ctags
CYGPATH_W = echo
DEFS = -DPACKAGE_NAME=\"orca\" -DPACKAGE_TARNAME=\"orca\" -DPACKAGE_VERSION=\"45.3\" -DPACKAGE_STRING=\"orca\ 45.3\" -DPACKAGE_BUGREPORT=\"https://gitlab.gnome.org/GNOME/orca/-/issues/\" -DPACKAGE_URL=\"\" -DPACKAGE=\"orca\" -DVERSION=\"45.3\" -DENABLE_NLS=1 -DHAVE_GETTEXT=1 -DHAVE_DCGETTEXT=1 -DGETTEXT_PACKAGE=\"orca\"
DEPDIR = .deps
ECHO_C =
ECHO_N = -n
ECHO_T =
ETAGS = etags
EXEEXT =
GETTEXT_MACRO_VERSION = 0.20
GETTEXT_PACKAGE = orca
GMSGFMT = /usr/bin/msgfmt
GMSGFMT_015 = /usr/bin/msgfmt
GSTREAMER_CFLAGS = -I/usr/include/gstreamer-1.0 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/sysprof-6 -pthread
GSTREAMER_LIBS = -lgstreamer-1.0 -lgobject-2.0 -lglib-2.0
HELP_DIR = ${datadir}/help
INSTALL = /usr/bin/install -c
INSTALL_DATA = ${INSTALL} -m 644
INSTALL_PROGRAM = ${INSTALL}
INSTALL_SCRIPT = ${INSTALL}
INSTALL_STRIP_PROGRAM = $(install_sh) -c -s
INTLLIBS =
INTL_MACOSX_LIBS =
ITSTOOL = itstool
LDFLAGS =
LIBICONV = -liconv
LIBINTL =
LIBOBJS =
LIBS =
LN_S = ln -s
LOUIS_TABLE_DIR = /usr/share/liblouis/tables
LTLIBICONV = -liconv
LTLIBINTL =
LTLIBOBJS =
MAINT =
MAKEINFO = ${SHELL} '/home/storm/orcatmp/orca/missing' makeinfo
MKDIR_P = /usr/bin/mkdir -p
MSGFMT = /usr/bin/msgfmt
MSGMERGE = /usr/bin/msgmerge
MSGMERGE_FOR_MSGFMT_OPTION = --for-msgfmt
OBJEXT = o
PACKAGE = orca
PACKAGE_BUGREPORT = https://gitlab.gnome.org/GNOME/orca/-/issues/
PACKAGE_NAME = orca
PACKAGE_STRING = orca 45.3
PACKAGE_TARNAME = orca
PACKAGE_URL =
PACKAGE_VERSION = 45.3
PATH_SEPARATOR = :
PKG_CONFIG = /usr/bin/pkg-config
PKG_CONFIG_LIBDIR =
PKG_CONFIG_PATH =
PLATFORM_PATH = :/usr/bin:/usr/sbin:/bin
POSUB = po
PYGOBJECT_CFLAGS = -I/usr/include/pygobject-3.0 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/sysprof-6 -pthread
PYGOBJECT_LIBS = -lgobject-2.0 -lglib-2.0
PYTHON = /home/storm/.pyenv/shims/python
PYTHON_EXEC_PREFIX = ${exec_prefix}
PYTHON_PLATFORM = linux
PYTHON_PREFIX = ${prefix}
PYTHON_VERSION = 3.12
REVISION = fb25228b6
SED = /usr/bin/sed
SET_MAKE =
SHELL = /bin/sh
STRIP =
USE_NLS = yes
VERSION = 45.3
XGETTEXT = /usr/bin/xgettext
XGETTEXT_015 = /usr/bin/xgettext
XGETTEXT_EXTRA_OPTIONS =
XMLLINT = xmllint
YELP_LC_DIST = true
YELP_LC_MEDIA_LINKS = true
abs_builddir = /home/storm/orcatmp/orca/docs
abs_srcdir = /home/storm/orcatmp/orca/docs
abs_top_builddir = /home/storm/orcatmp/orca
abs_top_srcdir = /home/storm/orcatmp/orca
ac_ct_CC = gcc
am__include = include
am__leading_dot = .
am__quote =
am__rm_f_notfound =
am__tar = tar --format=ustar -chf - "$$tardir"
am__untar = tar -xf -
am__xargs_n = xargs -n
bindir = ${exec_prefix}/bin
build = x86_64-pc-linux-gnu
build_alias =
build_cpu = x86_64
build_os = linux-gnu
build_vendor = pc
builddir = .
datadir = ${datarootdir}
datarootdir = ${prefix}/share
docdir = ${datarootdir}/doc/${PACKAGE_TARNAME}
dvidir = ${docdir}
exec_prefix = ${prefix}
host = x86_64-pc-linux-gnu
host_alias =
host_cpu = x86_64
host_os = linux-gnu
host_vendor = pc
htmldir = ${docdir}
includedir = ${prefix}/include
infodir = ${datarootdir}/info
install_sh = ${SHELL} /home/storm/orcatmp/orca/install-sh
libdir = ${exec_prefix}/lib
libexecdir = ${exec_prefix}/libexec
localedir = ${datarootdir}/locale
localedir_c = "/usr/local/share/locale"
localedir_c_make = \"$(localedir)\"
localstatedir = /var
mandir = ${datarootdir}/man
mkdir_p = $(MKDIR_P)
oldincludedir = /usr/include
pdfdir = ${docdir}
pkgpyexecdir = ${pyexecdir}/orca
pkgpythondir = ${pythondir}/orca
prefix = /usr/local
program_transform_name = s,x,x,
psdir = ${docdir}
pyexecdir = ${PYTHON_EXEC_PREFIX}/lib/python3.12/site-packages
pythondir = ${PYTHON_PREFIX}/lib/python3.12/site-packages
runstatedir = ${localstatedir}/run
sbindir = ${exec_prefix}/sbin
sharedstatedir = ${prefix}/com
srcdir = .
sysconfdir = /etc
target_alias =
top_build_prefix = ../
top_builddir = ..
top_srcdir = ..
SUBDIRS = man
all: all-recursive
.SUFFIXES:
$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)
@for dep in $?; do \
case '$(am__configure_deps)' in \
*$$dep*) \
( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
&& { if test -f $@; then exit 0; else break; fi; }; \
exit 1;; \
esac; \
done; \
echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu docs/Makefile'; \
$(am__cd) $(top_srcdir) && \
$(AUTOMAKE) --gnu docs/Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
@case '$?' in \
*config.status*) \
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
*) \
echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles)'; \
cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles);; \
esac;
$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(top_srcdir)/configure: $(am__configure_deps)
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(ACLOCAL_M4): $(am__aclocal_m4_deps)
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(am__aclocal_m4_deps):
# This directory's subdirectories are mostly independent; you can cd
# into them and run 'make' without going through this Makefile.
# To change the values of 'make' variables: instead of editing Makefiles,
# (1) if the variable is set in 'config.status', edit 'config.status'
# (which will cause the Makefiles to be regenerated when you run 'make');
# (2) otherwise, pass the desired values on the 'make' command line.
$(am__recursive_targets):
@fail=; \
if $(am__make_keepgoing); then \
failcom='fail=yes'; \
else \
failcom='exit 1'; \
fi; \
dot_seen=no; \
target=`echo $@ | sed s/-recursive//`; \
case "$@" in \
distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
*) list='$(SUBDIRS)' ;; \
esac; \
for subdir in $$list; do \
echo "Making $$target in $$subdir"; \
if test "$$subdir" = "."; then \
dot_seen=yes; \
local_target="$$target-am"; \
else \
local_target="$$target"; \
fi; \
($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
|| eval $$failcom; \
done; \
if test "$$dot_seen" = "no"; then \
$(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
fi; test -z "$$fail"
ID: $(am__tagged_files)
$(am__define_uniq_tagged_files); mkid -fID $$unique
tags: tags-recursive
TAGS: tags
tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
set x; \
here=`pwd`; \
if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
include_option=--etags-include; \
empty_fix=.; \
else \
include_option=--include; \
empty_fix=; \
fi; \
list='$(SUBDIRS)'; for subdir in $$list; do \
if test "$$subdir" = .; then :; else \
test ! -f $$subdir/TAGS || \
set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
fi; \
done; \
$(am__define_uniq_tagged_files); \
shift; \
if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
test -n "$$unique" || unique=$$empty_fix; \
if test $$# -gt 0; then \
$(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
"$$@" $$unique; \
else \
$(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
$$unique; \
fi; \
fi
ctags: ctags-recursive
CTAGS: ctags
ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
$(am__define_uniq_tagged_files); \
test -z "$(CTAGS_ARGS)$$unique" \
|| $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
$$unique
GTAGS:
here=`$(am__cd) $(top_builddir) && pwd` \
&& $(am__cd) $(top_srcdir) \
&& gtags -i $(GTAGS_ARGS) "$$here"
cscopelist: cscopelist-recursive
cscopelist-am: $(am__tagged_files)
list='$(am__tagged_files)'; \
case "$(srcdir)" in \
[\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
*) sdir=$(subdir)/$(srcdir) ;; \
esac; \
for i in $$list; do \
if test -f "$$i"; then \
echo "$(subdir)/$$i"; \
else \
echo "$$sdir/$$i"; \
fi; \
done >> $(top_builddir)/cscope.files
distclean-tags:
-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
distdir: $(BUILT_SOURCES)
$(MAKE) $(AM_MAKEFLAGS) distdir-am
distdir-am: $(DISTFILES)
@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
list='$(DISTFILES)'; \
dist_files=`for file in $$list; do echo $$file; done | \
sed -e "s|^$$srcdirstrip/||;t" \
-e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
case $$dist_files in \
*/*) $(MKDIR_P) `echo "$$dist_files" | \
sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
sort -u` ;; \
esac; \
for file in $$dist_files; do \
if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
if test -d $$d/$$file; then \
dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
if test -d "$(distdir)/$$file"; then \
find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
fi; \
if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
fi; \
cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
else \
test -f "$(distdir)/$$file" \
|| cp -p $$d/$$file "$(distdir)/$$file" \
|| exit 1; \
fi; \
done
@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
if test "$$subdir" = .; then :; else \
$(am__make_dryrun) \
|| test -d "$(distdir)/$$subdir" \
|| $(MKDIR_P) "$(distdir)/$$subdir" \
|| exit 1; \
dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
$(am__relativize); \
new_distdir=$$reldir; \
dir1=$$subdir; dir2="$(top_distdir)"; \
$(am__relativize); \
new_top_distdir=$$reldir; \
echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
($(am__cd) $$subdir && \
$(MAKE) $(AM_MAKEFLAGS) \
top_distdir="$$new_top_distdir" \
distdir="$$new_distdir" \
am__remove_distdir=: \
am__skip_length_check=: \
am__skip_mode_fix=: \
distdir) \
|| exit 1; \
fi; \
done
check-am: all-am
check: check-recursive
all-am: Makefile
installdirs: installdirs-recursive
installdirs-am:
install: install-recursive
install-exec: install-exec-recursive
install-data: install-data-recursive
uninstall: uninstall-recursive
install-am: all-am
@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
installcheck: installcheck-recursive
install-strip:
if test -z '$(STRIP)'; then \
$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
install; \
else \
$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
"INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
fi
mostlyclean-generic:
clean-generic:
distclean-generic:
-$(am__rm_f) $(CONFIG_CLEAN_FILES)
-test . = "$(srcdir)" || $(am__rm_f) $(CONFIG_CLEAN_VPATH_FILES)
maintainer-clean-generic:
@echo "This command is intended for maintainers to use"
@echo "it deletes files that may require special tools to rebuild."
clean: clean-recursive
clean-am: clean-generic mostlyclean-am
distclean: distclean-recursive
-rm -f Makefile
distclean-am: clean-am distclean-generic distclean-tags
dvi: dvi-recursive
dvi-am:
html: html-recursive
html-am:
info: info-recursive
info-am:
install-data-am:
install-dvi: install-dvi-recursive
install-dvi-am:
install-exec-am:
install-html: install-html-recursive
install-html-am:
install-info: install-info-recursive
install-info-am:
install-man:
install-pdf: install-pdf-recursive
install-pdf-am:
install-ps: install-ps-recursive
install-ps-am:
installcheck-am:
maintainer-clean: maintainer-clean-recursive
-rm -f Makefile
maintainer-clean-am: distclean-am maintainer-clean-generic
mostlyclean: mostlyclean-recursive
mostlyclean-am: mostlyclean-generic
pdf: pdf-recursive
pdf-am:
ps: ps-recursive
ps-am:
uninstall-am:
.MAKE: $(am__recursive_targets) install-am install-strip
.PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am check \
check-am clean clean-generic cscopelist-am ctags ctags-am \
distclean distclean-generic distclean-tags distdir dvi dvi-am \
html html-am info info-am install install-am install-data \
install-data-am install-dvi install-dvi-am install-exec \
install-exec-am install-html install-html-am install-info \
install-info-am install-man install-pdf install-pdf-am \
install-ps install-ps-am install-strip installcheck \
installcheck-am installdirs installdirs-am maintainer-clean \
maintainer-clean-generic mostlyclean mostlyclean-generic pdf \
pdf-am ps ps-am tags tags-am uninstall uninstall-am
.PRECIOUS: Makefile
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT:
# Tell GNU make to disable its built-in pattern rules.
%:: %,v
%:: RCS/%,v
%:: RCS/%
%:: s.%
%:: SCCS/s.%

1
docs/Makefile.am Normal file
View File

@ -0,0 +1 @@
SUBDIRS = man

655
docs/Makefile.in Normal file
View File

@ -0,0 +1,655 @@
# Makefile.in generated by automake 1.17 from Makefile.am.
# @configure_input@
# Copyright (C) 1994-2024 Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.
@SET_MAKE@
VPATH = @srcdir@
am__is_gnu_make = { \
if test -z '$(MAKELEVEL)'; then \
false; \
elif test -n '$(MAKE_HOST)'; then \
true; \
elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
true; \
else \
false; \
fi; \
}
am__make_running_with_option = \
case $${target_option-} in \
?) ;; \
*) echo "am__make_running_with_option: internal error: invalid" \
"target option '$${target_option-}' specified" >&2; \
exit 1;; \
esac; \
has_opt=no; \
sane_makeflags=$$MAKEFLAGS; \
if $(am__is_gnu_make); then \
sane_makeflags=$$MFLAGS; \
else \
case $$MAKEFLAGS in \
*\\[\ \ ]*) \
bs=\\; \
sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
| sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \
esac; \
fi; \
skip_next=no; \
strip_trailopt () \
{ \
flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
}; \
for flg in $$sane_makeflags; do \
test $$skip_next = yes && { skip_next=no; continue; }; \
case $$flg in \
*=*|--*) continue;; \
-*I) strip_trailopt 'I'; skip_next=yes;; \
-*I?*) strip_trailopt 'I';; \
-*O) strip_trailopt 'O'; skip_next=yes;; \
-*O?*) strip_trailopt 'O';; \
-*l) strip_trailopt 'l'; skip_next=yes;; \
-*l?*) strip_trailopt 'l';; \
-[dEDm]) skip_next=yes;; \
-[JT]) skip_next=yes;; \
esac; \
case $$flg in \
*$$target_option*) has_opt=yes; break;; \
esac; \
done; \
test $$has_opt = yes
am__make_dryrun = (target_option=n; $(am__make_running_with_option))
am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
am__rm_f = rm -f $(am__rm_f_notfound)
am__rm_rf = rm -rf $(am__rm_f_notfound)
pkgdatadir = $(datadir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
pkglibexecdir = $(libexecdir)/@PACKAGE@
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
INSTALL_HEADER = $(INSTALL_DATA)
transform = $(program_transform_name)
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
build_triplet = @build@
host_triplet = @host@
subdir = docs
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/m4/build-to-host.m4 \
$(top_srcdir)/m4/gettext.m4 $(top_srcdir)/m4/host-cpu-c-abi.m4 \
$(top_srcdir)/m4/iconv.m4 $(top_srcdir)/m4/intlmacosx.m4 \
$(top_srcdir)/m4/lib-ld.m4 $(top_srcdir)/m4/lib-link.m4 \
$(top_srcdir)/m4/lib-prefix.m4 $(top_srcdir)/m4/nls.m4 \
$(top_srcdir)/m4/pkg.m4 $(top_srcdir)/m4/po.m4 \
$(top_srcdir)/m4/progtest.m4 $(top_srcdir)/m4/yelp.m4 \
$(top_srcdir)/acinclude.m4 $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON)
mkinstalldirs = $(install_sh) -d
CONFIG_CLEAN_FILES =
CONFIG_CLEAN_VPATH_FILES =
AM_V_P = $(am__v_P_@AM_V@)
am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
am__v_P_0 = false
am__v_P_1 = :
AM_V_GEN = $(am__v_GEN_@AM_V@)
am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
am__v_GEN_0 = @echo " GEN " $@;
am__v_GEN_1 =
AM_V_at = $(am__v_at_@AM_V@)
am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
am__v_at_0 = @
am__v_at_1 =
SOURCES =
DIST_SOURCES =
RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \
ctags-recursive dvi-recursive html-recursive info-recursive \
install-data-recursive install-dvi-recursive \
install-exec-recursive install-html-recursive \
install-info-recursive install-pdf-recursive \
install-ps-recursive install-recursive installcheck-recursive \
installdirs-recursive pdf-recursive ps-recursive \
tags-recursive uninstall-recursive
am__can_run_installinfo = \
case $$AM_UPDATE_INFO_DIR in \
n|no|NO) false;; \
*) (install-info --version) >/dev/null 2>&1;; \
esac
RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \
distclean-recursive maintainer-clean-recursive
am__recursive_targets = \
$(RECURSIVE_TARGETS) \
$(RECURSIVE_CLEAN_TARGETS) \
$(am__extra_recursive_targets)
AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \
distdir distdir-am
am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
# Read a list of newline-separated strings from the standard input,
# and print each of them once, without duplicates. Input order is
# *not* preserved.
am__uniquify_input = $(AWK) '\
BEGIN { nonempty = 0; } \
{ items[$$0] = 1; nonempty = 1; } \
END { if (nonempty) { for (i in items) print i; }; } \
'
# Make sure the list of sources is unique. This is necessary because,
# e.g., the same source file might be shared among _SOURCES variables
# for different programs/libraries.
am__define_uniq_tagged_files = \
list='$(am__tagged_files)'; \
unique=`for i in $$list; do \
if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
done | $(am__uniquify_input)`
DIST_SUBDIRS = $(SUBDIRS)
am__DIST_COMMON = $(srcdir)/Makefile.in
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
am__relativize = \
dir0=`pwd`; \
sed_first='s,^\([^/]*\)/.*$$,\1,'; \
sed_rest='s,^[^/]*/*,,'; \
sed_last='s,^.*/\([^/]*\)$$,\1,'; \
sed_butlast='s,/*[^/]*$$,,'; \
while test -n "$$dir1"; do \
first=`echo "$$dir1" | sed -e "$$sed_first"`; \
if test "$$first" != "."; then \
if test "$$first" = ".."; then \
dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
else \
first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
if test "$$first2" = "$$first"; then \
dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
else \
dir2="../$$dir2"; \
fi; \
dir0="$$dir0"/"$$first"; \
fi; \
fi; \
dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
done; \
reldir="$$dir2"
ACLOCAL = @ACLOCAL@
AMTAR = @AMTAR@
AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
ATKBRIDGE_CFLAGS = @ATKBRIDGE_CFLAGS@
ATKBRIDGE_LIBS = @ATKBRIDGE_LIBS@
ATSPI2_CFLAGS = @ATSPI2_CFLAGS@
ATSPI2_LIBS = @ATSPI2_LIBS@
AUTOCONF = @AUTOCONF@
AUTOHEADER = @AUTOHEADER@
AUTOMAKE = @AUTOMAKE@
AWK = @AWK@
CC = @CC@
CCDEPMODE = @CCDEPMODE@
CFLAGS = @CFLAGS@
CPP = @CPP@
CPPFLAGS = @CPPFLAGS@
CSCOPE = @CSCOPE@
CTAGS = @CTAGS@
CYGPATH_W = @CYGPATH_W@
DEFS = @DEFS@
DEPDIR = @DEPDIR@
ECHO_C = @ECHO_C@
ECHO_N = @ECHO_N@
ECHO_T = @ECHO_T@
ETAGS = @ETAGS@
EXEEXT = @EXEEXT@
GETTEXT_MACRO_VERSION = @GETTEXT_MACRO_VERSION@
GETTEXT_PACKAGE = @GETTEXT_PACKAGE@
GMSGFMT = @GMSGFMT@
GMSGFMT_015 = @GMSGFMT_015@
GSTREAMER_CFLAGS = @GSTREAMER_CFLAGS@
GSTREAMER_LIBS = @GSTREAMER_LIBS@
HELP_DIR = @HELP_DIR@
INSTALL = @INSTALL@
INSTALL_DATA = @INSTALL_DATA@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_SCRIPT = @INSTALL_SCRIPT@
INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
INTLLIBS = @INTLLIBS@
INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@
ITSTOOL = @ITSTOOL@
LDFLAGS = @LDFLAGS@
LIBICONV = @LIBICONV@
LIBINTL = @LIBINTL@
LIBOBJS = @LIBOBJS@
LIBS = @LIBS@
LN_S = @LN_S@
LOUIS_TABLE_DIR = @LOUIS_TABLE_DIR@
LTLIBICONV = @LTLIBICONV@
LTLIBINTL = @LTLIBINTL@
LTLIBOBJS = @LTLIBOBJS@
MAINT = @MAINT@
MAKEINFO = @MAKEINFO@
MKDIR_P = @MKDIR_P@
MSGFMT = @MSGFMT@
MSGMERGE = @MSGMERGE@
MSGMERGE_FOR_MSGFMT_OPTION = @MSGMERGE_FOR_MSGFMT_OPTION@
OBJEXT = @OBJEXT@
PACKAGE = @PACKAGE@
PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
PACKAGE_NAME = @PACKAGE_NAME@
PACKAGE_STRING = @PACKAGE_STRING@
PACKAGE_TARNAME = @PACKAGE_TARNAME@
PACKAGE_URL = @PACKAGE_URL@
PACKAGE_VERSION = @PACKAGE_VERSION@
PATH_SEPARATOR = @PATH_SEPARATOR@
PKG_CONFIG = @PKG_CONFIG@
PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@
PKG_CONFIG_PATH = @PKG_CONFIG_PATH@
PLATFORM_PATH = @PLATFORM_PATH@
POSUB = @POSUB@
PYGOBJECT_CFLAGS = @PYGOBJECT_CFLAGS@
PYGOBJECT_LIBS = @PYGOBJECT_LIBS@
PYTHON = @PYTHON@
PYTHON_EXEC_PREFIX = @PYTHON_EXEC_PREFIX@
PYTHON_PLATFORM = @PYTHON_PLATFORM@
PYTHON_PREFIX = @PYTHON_PREFIX@
PYTHON_VERSION = @PYTHON_VERSION@
REVISION = @REVISION@
SED = @SED@
SET_MAKE = @SET_MAKE@
SHELL = @SHELL@
STRIP = @STRIP@
USE_NLS = @USE_NLS@
VERSION = @VERSION@
XGETTEXT = @XGETTEXT@
XGETTEXT_015 = @XGETTEXT_015@
XGETTEXT_EXTRA_OPTIONS = @XGETTEXT_EXTRA_OPTIONS@
XMLLINT = @XMLLINT@
YELP_LC_DIST = @YELP_LC_DIST@
YELP_LC_MEDIA_LINKS = @YELP_LC_MEDIA_LINKS@
abs_builddir = @abs_builddir@
abs_srcdir = @abs_srcdir@
abs_top_builddir = @abs_top_builddir@
abs_top_srcdir = @abs_top_srcdir@
ac_ct_CC = @ac_ct_CC@
am__include = @am__include@
am__leading_dot = @am__leading_dot@
am__quote = @am__quote@
am__rm_f_notfound = @am__rm_f_notfound@
am__tar = @am__tar@
am__untar = @am__untar@
am__xargs_n = @am__xargs_n@
bindir = @bindir@
build = @build@
build_alias = @build_alias@
build_cpu = @build_cpu@
build_os = @build_os@
build_vendor = @build_vendor@
builddir = @builddir@
datadir = @datadir@
datarootdir = @datarootdir@
docdir = @docdir@
dvidir = @dvidir@
exec_prefix = @exec_prefix@
host = @host@
host_alias = @host_alias@
host_cpu = @host_cpu@
host_os = @host_os@
host_vendor = @host_vendor@
htmldir = @htmldir@
includedir = @includedir@
infodir = @infodir@
install_sh = @install_sh@
libdir = @libdir@
libexecdir = @libexecdir@
localedir = @localedir@
localedir_c = @localedir_c@
localedir_c_make = @localedir_c_make@
localstatedir = @localstatedir@
mandir = @mandir@
mkdir_p = @mkdir_p@
oldincludedir = @oldincludedir@
pdfdir = @pdfdir@
pkgpyexecdir = @pkgpyexecdir@
pkgpythondir = @pkgpythondir@
prefix = @prefix@
program_transform_name = @program_transform_name@
psdir = @psdir@
pyexecdir = @pyexecdir@
pythondir = @pythondir@
runstatedir = @runstatedir@
sbindir = @sbindir@
sharedstatedir = @sharedstatedir@
srcdir = @srcdir@
sysconfdir = @sysconfdir@
target_alias = @target_alias@
top_build_prefix = @top_build_prefix@
top_builddir = @top_builddir@
top_srcdir = @top_srcdir@
SUBDIRS = man
all: all-recursive
.SUFFIXES:
$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps)
@for dep in $?; do \
case '$(am__configure_deps)' in \
*$$dep*) \
( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
&& { if test -f $@; then exit 0; else break; fi; }; \
exit 1;; \
esac; \
done; \
echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu docs/Makefile'; \
$(am__cd) $(top_srcdir) && \
$(AUTOMAKE) --gnu docs/Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
@case '$?' in \
*config.status*) \
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
*) \
echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles)'; \
cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles);; \
esac;
$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(am__aclocal_m4_deps):
# This directory's subdirectories are mostly independent; you can cd
# into them and run 'make' without going through this Makefile.
# To change the values of 'make' variables: instead of editing Makefiles,
# (1) if the variable is set in 'config.status', edit 'config.status'
# (which will cause the Makefiles to be regenerated when you run 'make');
# (2) otherwise, pass the desired values on the 'make' command line.
$(am__recursive_targets):
@fail=; \
if $(am__make_keepgoing); then \
failcom='fail=yes'; \
else \
failcom='exit 1'; \
fi; \
dot_seen=no; \
target=`echo $@ | sed s/-recursive//`; \
case "$@" in \
distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
*) list='$(SUBDIRS)' ;; \
esac; \
for subdir in $$list; do \
echo "Making $$target in $$subdir"; \
if test "$$subdir" = "."; then \
dot_seen=yes; \
local_target="$$target-am"; \
else \
local_target="$$target"; \
fi; \
($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
|| eval $$failcom; \
done; \
if test "$$dot_seen" = "no"; then \
$(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
fi; test -z "$$fail"
ID: $(am__tagged_files)
$(am__define_uniq_tagged_files); mkid -fID $$unique
tags: tags-recursive
TAGS: tags
tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
set x; \
here=`pwd`; \
if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
include_option=--etags-include; \
empty_fix=.; \
else \
include_option=--include; \
empty_fix=; \
fi; \
list='$(SUBDIRS)'; for subdir in $$list; do \
if test "$$subdir" = .; then :; else \
test ! -f $$subdir/TAGS || \
set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
fi; \
done; \
$(am__define_uniq_tagged_files); \
shift; \
if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
test -n "$$unique" || unique=$$empty_fix; \
if test $$# -gt 0; then \
$(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
"$$@" $$unique; \
else \
$(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
$$unique; \
fi; \
fi
ctags: ctags-recursive
CTAGS: ctags
ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
$(am__define_uniq_tagged_files); \
test -z "$(CTAGS_ARGS)$$unique" \
|| $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
$$unique
GTAGS:
here=`$(am__cd) $(top_builddir) && pwd` \
&& $(am__cd) $(top_srcdir) \
&& gtags -i $(GTAGS_ARGS) "$$here"
cscopelist: cscopelist-recursive
cscopelist-am: $(am__tagged_files)
list='$(am__tagged_files)'; \
case "$(srcdir)" in \
[\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
*) sdir=$(subdir)/$(srcdir) ;; \
esac; \
for i in $$list; do \
if test -f "$$i"; then \
echo "$(subdir)/$$i"; \
else \
echo "$$sdir/$$i"; \
fi; \
done >> $(top_builddir)/cscope.files
distclean-tags:
-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
distdir: $(BUILT_SOURCES)
$(MAKE) $(AM_MAKEFLAGS) distdir-am
distdir-am: $(DISTFILES)
@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
list='$(DISTFILES)'; \
dist_files=`for file in $$list; do echo $$file; done | \
sed -e "s|^$$srcdirstrip/||;t" \
-e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
case $$dist_files in \
*/*) $(MKDIR_P) `echo "$$dist_files" | \
sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
sort -u` ;; \
esac; \
for file in $$dist_files; do \
if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
if test -d $$d/$$file; then \
dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
if test -d "$(distdir)/$$file"; then \
find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
fi; \
if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
fi; \
cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
else \
test -f "$(distdir)/$$file" \
|| cp -p $$d/$$file "$(distdir)/$$file" \
|| exit 1; \
fi; \
done
@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
if test "$$subdir" = .; then :; else \
$(am__make_dryrun) \
|| test -d "$(distdir)/$$subdir" \
|| $(MKDIR_P) "$(distdir)/$$subdir" \
|| exit 1; \
dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
$(am__relativize); \
new_distdir=$$reldir; \
dir1=$$subdir; dir2="$(top_distdir)"; \
$(am__relativize); \
new_top_distdir=$$reldir; \
echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
($(am__cd) $$subdir && \
$(MAKE) $(AM_MAKEFLAGS) \
top_distdir="$$new_top_distdir" \
distdir="$$new_distdir" \
am__remove_distdir=: \
am__skip_length_check=: \
am__skip_mode_fix=: \
distdir) \
|| exit 1; \
fi; \
done
check-am: all-am
check: check-recursive
all-am: Makefile
installdirs: installdirs-recursive
installdirs-am:
install: install-recursive
install-exec: install-exec-recursive
install-data: install-data-recursive
uninstall: uninstall-recursive
install-am: all-am
@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
installcheck: installcheck-recursive
install-strip:
if test -z '$(STRIP)'; then \
$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
install; \
else \
$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
"INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
fi
mostlyclean-generic:
clean-generic:
distclean-generic:
-$(am__rm_f) $(CONFIG_CLEAN_FILES)
-test . = "$(srcdir)" || $(am__rm_f) $(CONFIG_CLEAN_VPATH_FILES)
maintainer-clean-generic:
@echo "This command is intended for maintainers to use"
@echo "it deletes files that may require special tools to rebuild."
clean: clean-recursive
clean-am: clean-generic mostlyclean-am
distclean: distclean-recursive
-rm -f Makefile
distclean-am: clean-am distclean-generic distclean-tags
dvi: dvi-recursive
dvi-am:
html: html-recursive
html-am:
info: info-recursive
info-am:
install-data-am:
install-dvi: install-dvi-recursive
install-dvi-am:
install-exec-am:
install-html: install-html-recursive
install-html-am:
install-info: install-info-recursive
install-info-am:
install-man:
install-pdf: install-pdf-recursive
install-pdf-am:
install-ps: install-ps-recursive
install-ps-am:
installcheck-am:
maintainer-clean: maintainer-clean-recursive
-rm -f Makefile
maintainer-clean-am: distclean-am maintainer-clean-generic
mostlyclean: mostlyclean-recursive
mostlyclean-am: mostlyclean-generic
pdf: pdf-recursive
pdf-am:
ps: ps-recursive
ps-am:
uninstall-am:
.MAKE: $(am__recursive_targets) install-am install-strip
.PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am check \
check-am clean clean-generic cscopelist-am ctags ctags-am \
distclean distclean-generic distclean-tags distdir dvi dvi-am \
html html-am info info-am install install-am install-data \
install-data-am install-dvi install-dvi-am install-exec \
install-exec-am install-html install-html-am install-info \
install-info-am install-man install-pdf install-pdf-am \
install-ps install-ps-am install-strip installcheck \
installcheck-am installdirs installdirs-am maintainer-clean \
maintainer-clean-generic mostlyclean mostlyclean-generic pdf \
pdf-am ps ps-am tags tags-am uninstall uninstall-am
.PRECIOUS: Makefile
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT:
# Tell GNU make to disable its built-in pattern rules.
%:: %,v
%:: RCS/%,v
%:: RCS/%
%:: s.%
%:: SCCS/s.%

557
docs/man/Makefile Normal file
View File

@ -0,0 +1,557 @@
# Makefile.in generated by automake 1.17 from Makefile.am.
# docs/man/Makefile. Generated from Makefile.in by configure.
# Copyright (C) 1994-2024 Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.
am__is_gnu_make = { \
if test -z '$(MAKELEVEL)'; then \
false; \
elif test -n '$(MAKE_HOST)'; then \
true; \
elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
true; \
else \
false; \
fi; \
}
am__make_running_with_option = \
case $${target_option-} in \
?) ;; \
*) echo "am__make_running_with_option: internal error: invalid" \
"target option '$${target_option-}' specified" >&2; \
exit 1;; \
esac; \
has_opt=no; \
sane_makeflags=$$MAKEFLAGS; \
if $(am__is_gnu_make); then \
sane_makeflags=$$MFLAGS; \
else \
case $$MAKEFLAGS in \
*\\[\ \ ]*) \
bs=\\; \
sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
| sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \
esac; \
fi; \
skip_next=no; \
strip_trailopt () \
{ \
flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
}; \
for flg in $$sane_makeflags; do \
test $$skip_next = yes && { skip_next=no; continue; }; \
case $$flg in \
*=*|--*) continue;; \
-*I) strip_trailopt 'I'; skip_next=yes;; \
-*I?*) strip_trailopt 'I';; \
-*O) strip_trailopt 'O'; skip_next=yes;; \
-*O?*) strip_trailopt 'O';; \
-*l) strip_trailopt 'l'; skip_next=yes;; \
-*l?*) strip_trailopt 'l';; \
-[dEDm]) skip_next=yes;; \
-[JT]) skip_next=yes;; \
esac; \
case $$flg in \
*$$target_option*) has_opt=yes; break;; \
esac; \
done; \
test $$has_opt = yes
am__make_dryrun = (target_option=n; $(am__make_running_with_option))
am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
am__rm_f = rm -f $(am__rm_f_notfound)
am__rm_rf = rm -rf $(am__rm_f_notfound)
pkgdatadir = $(datadir)/orca
pkgincludedir = $(includedir)/orca
pkglibdir = $(libdir)/orca
pkglibexecdir = $(libexecdir)/orca
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
INSTALL_HEADER = $(INSTALL_DATA)
transform = $(program_transform_name)
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
build_triplet = x86_64-pc-linux-gnu
host_triplet = x86_64-pc-linux-gnu
subdir = docs/man
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/m4/build-to-host.m4 \
$(top_srcdir)/m4/gettext.m4 $(top_srcdir)/m4/host-cpu-c-abi.m4 \
$(top_srcdir)/m4/iconv.m4 $(top_srcdir)/m4/intlmacosx.m4 \
$(top_srcdir)/m4/lib-ld.m4 $(top_srcdir)/m4/lib-link.m4 \
$(top_srcdir)/m4/lib-prefix.m4 $(top_srcdir)/m4/nls.m4 \
$(top_srcdir)/m4/pkg.m4 $(top_srcdir)/m4/po.m4 \
$(top_srcdir)/m4/progtest.m4 $(top_srcdir)/m4/yelp.m4 \
$(top_srcdir)/acinclude.m4 $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON)
mkinstalldirs = $(install_sh) -d
CONFIG_CLEAN_FILES =
CONFIG_CLEAN_VPATH_FILES =
AM_V_P = $(am__v_P_$(V))
am__v_P_ = $(am__v_P_$(AM_DEFAULT_VERBOSITY))
am__v_P_0 = false
am__v_P_1 = :
AM_V_GEN = $(am__v_GEN_$(V))
am__v_GEN_ = $(am__v_GEN_$(AM_DEFAULT_VERBOSITY))
am__v_GEN_0 = @echo " GEN " $@;
am__v_GEN_1 =
AM_V_at = $(am__v_at_$(V))
am__v_at_ = $(am__v_at_$(AM_DEFAULT_VERBOSITY))
am__v_at_0 = @
am__v_at_1 =
SOURCES =
DIST_SOURCES =
am__can_run_installinfo = \
case $$AM_UPDATE_INFO_DIR in \
n|no|NO) false;; \
*) (install-info --version) >/dev/null 2>&1;; \
esac
am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
am__vpath_adj = case $$p in \
$(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
*) f=$$p;; \
esac;
am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
am__install_max = 40
am__nobase_strip_setup = \
srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
am__nobase_strip = \
for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
am__nobase_list = $(am__nobase_strip_setup); \
for p in $$list; do echo "$$p $$p"; done | \
sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
$(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
if (++n[$$2] == $(am__install_max)) \
{ print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
END { for (dir in files) print dir, files[dir] }'
am__base_list = \
sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
am__uninstall_files_from_dir = { \
{ test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
|| { echo " ( cd '$$dir' && rm -f" $$files ")"; \
$(am__cd) "$$dir" && echo $$files | $(am__xargs_n) 40 $(am__rm_f); }; \
}
man1dir = $(mandir)/man1
am__installdirs = "$(DESTDIR)$(man1dir)"
NROFF = nroff
MANS = $(man1_MANS)
am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
am__DIST_COMMON = $(srcdir)/Makefile.in
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
ACLOCAL = ${SHELL} '/home/storm/orcatmp/orca/missing' aclocal-1.17
AMTAR = $${TAR-tar}
AM_DEFAULT_VERBOSITY = 1
ATKBRIDGE_CFLAGS = -I/usr/include/at-spi2-atk/2.0 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/at-spi-2.0 -I/usr/include/libmount -I/usr/include/blkid -I/usr/include/sysprof-6 -pthread -I/usr/include/atk-1.0 -I/usr/include/dbus-1.0 -I/usr/lib/dbus-1.0/include
ATKBRIDGE_LIBS = -latk-bridge-2.0
ATSPI2_CFLAGS = -I/usr/include/at-spi-2.0 -I/usr/include/dbus-1.0 -I/usr/lib/dbus-1.0/include -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/libmount -I/usr/include/blkid -I/usr/include/sysprof-6 -pthread
ATSPI2_LIBS = -latspi -ldbus-1 -lglib-2.0
AUTOCONF = ${SHELL} '/home/storm/orcatmp/orca/missing' autoconf
AUTOHEADER = ${SHELL} '/home/storm/orcatmp/orca/missing' autoheader
AUTOMAKE = ${SHELL} '/home/storm/orcatmp/orca/missing' automake-1.17
AWK = gawk
CC = gcc
CCDEPMODE = depmode=none
CFLAGS = -g -O2
CPP = gcc -E
CPPFLAGS =
CSCOPE = cscope
CTAGS = ctags
CYGPATH_W = echo
DEFS = -DPACKAGE_NAME=\"orca\" -DPACKAGE_TARNAME=\"orca\" -DPACKAGE_VERSION=\"45.3\" -DPACKAGE_STRING=\"orca\ 45.3\" -DPACKAGE_BUGREPORT=\"https://gitlab.gnome.org/GNOME/orca/-/issues/\" -DPACKAGE_URL=\"\" -DPACKAGE=\"orca\" -DVERSION=\"45.3\" -DENABLE_NLS=1 -DHAVE_GETTEXT=1 -DHAVE_DCGETTEXT=1 -DGETTEXT_PACKAGE=\"orca\"
DEPDIR = .deps
ECHO_C =
ECHO_N = -n
ECHO_T =
ETAGS = etags
EXEEXT =
GETTEXT_MACRO_VERSION = 0.20
GETTEXT_PACKAGE = orca
GMSGFMT = /usr/bin/msgfmt
GMSGFMT_015 = /usr/bin/msgfmt
GSTREAMER_CFLAGS = -I/usr/include/gstreamer-1.0 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/sysprof-6 -pthread
GSTREAMER_LIBS = -lgstreamer-1.0 -lgobject-2.0 -lglib-2.0
HELP_DIR = ${datadir}/help
INSTALL = /usr/bin/install -c
INSTALL_DATA = ${INSTALL} -m 644
INSTALL_PROGRAM = ${INSTALL}
INSTALL_SCRIPT = ${INSTALL}
INSTALL_STRIP_PROGRAM = $(install_sh) -c -s
INTLLIBS =
INTL_MACOSX_LIBS =
ITSTOOL = itstool
LDFLAGS =
LIBICONV = -liconv
LIBINTL =
LIBOBJS =
LIBS =
LN_S = ln -s
LOUIS_TABLE_DIR = /usr/share/liblouis/tables
LTLIBICONV = -liconv
LTLIBINTL =
LTLIBOBJS =
MAINT =
MAKEINFO = ${SHELL} '/home/storm/orcatmp/orca/missing' makeinfo
MKDIR_P = /usr/bin/mkdir -p
MSGFMT = /usr/bin/msgfmt
MSGMERGE = /usr/bin/msgmerge
MSGMERGE_FOR_MSGFMT_OPTION = --for-msgfmt
OBJEXT = o
PACKAGE = orca
PACKAGE_BUGREPORT = https://gitlab.gnome.org/GNOME/orca/-/issues/
PACKAGE_NAME = orca
PACKAGE_STRING = orca 45.3
PACKAGE_TARNAME = orca
PACKAGE_URL =
PACKAGE_VERSION = 45.3
PATH_SEPARATOR = :
PKG_CONFIG = /usr/bin/pkg-config
PKG_CONFIG_LIBDIR =
PKG_CONFIG_PATH =
PLATFORM_PATH = :/usr/bin:/usr/sbin:/bin
POSUB = po
PYGOBJECT_CFLAGS = -I/usr/include/pygobject-3.0 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/sysprof-6 -pthread
PYGOBJECT_LIBS = -lgobject-2.0 -lglib-2.0
PYTHON = /home/storm/.pyenv/shims/python
PYTHON_EXEC_PREFIX = ${exec_prefix}
PYTHON_PLATFORM = linux
PYTHON_PREFIX = ${prefix}
PYTHON_VERSION = 3.12
REVISION = fb25228b6
SED = /usr/bin/sed
SET_MAKE =
SHELL = /bin/sh
STRIP =
USE_NLS = yes
VERSION = 45.3
XGETTEXT = /usr/bin/xgettext
XGETTEXT_015 = /usr/bin/xgettext
XGETTEXT_EXTRA_OPTIONS =
XMLLINT = xmllint
YELP_LC_DIST = true
YELP_LC_MEDIA_LINKS = true
abs_builddir = /home/storm/orcatmp/orca/docs/man
abs_srcdir = /home/storm/orcatmp/orca/docs/man
abs_top_builddir = /home/storm/orcatmp/orca
abs_top_srcdir = /home/storm/orcatmp/orca
ac_ct_CC = gcc
am__include = include
am__leading_dot = .
am__quote =
am__rm_f_notfound =
am__tar = tar --format=ustar -chf - "$$tardir"
am__untar = tar -xf -
am__xargs_n = xargs -n
bindir = ${exec_prefix}/bin
build = x86_64-pc-linux-gnu
build_alias =
build_cpu = x86_64
build_os = linux-gnu
build_vendor = pc
builddir = .
datadir = ${datarootdir}
datarootdir = ${prefix}/share
docdir = ${datarootdir}/doc/${PACKAGE_TARNAME}
dvidir = ${docdir}
exec_prefix = ${prefix}
host = x86_64-pc-linux-gnu
host_alias =
host_cpu = x86_64
host_os = linux-gnu
host_vendor = pc
htmldir = ${docdir}
includedir = ${prefix}/include
infodir = ${datarootdir}/info
install_sh = ${SHELL} /home/storm/orcatmp/orca/install-sh
libdir = ${exec_prefix}/lib
libexecdir = ${exec_prefix}/libexec
localedir = ${datarootdir}/locale
localedir_c = "/usr/local/share/locale"
localedir_c_make = \"$(localedir)\"
localstatedir = /var
mandir = ${datarootdir}/man
mkdir_p = $(MKDIR_P)
oldincludedir = /usr/include
pdfdir = ${docdir}
pkgpyexecdir = ${pyexecdir}/orca
pkgpythondir = ${pythondir}/orca
prefix = /usr/local
program_transform_name = s,x,x,
psdir = ${docdir}
pyexecdir = ${PYTHON_EXEC_PREFIX}/lib/python3.12/site-packages
pythondir = ${PYTHON_PREFIX}/lib/python3.12/site-packages
runstatedir = ${localstatedir}/run
sbindir = ${exec_prefix}/sbin
sharedstatedir = ${prefix}/com
srcdir = .
sysconfdir = /etc
target_alias =
top_build_prefix = ../../
top_builddir = ../..
top_srcdir = ../..
man1_MANS = orca.1
EXTRA_DIST = \
$(man1_MANS)
all: all-am
.SUFFIXES:
$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)
@for dep in $?; do \
case '$(am__configure_deps)' in \
*$$dep*) \
( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
&& { if test -f $@; then exit 0; else break; fi; }; \
exit 1;; \
esac; \
done; \
echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu docs/man/Makefile'; \
$(am__cd) $(top_srcdir) && \
$(AUTOMAKE) --gnu docs/man/Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
@case '$?' in \
*config.status*) \
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
*) \
echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles)'; \
cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles);; \
esac;
$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(top_srcdir)/configure: $(am__configure_deps)
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(ACLOCAL_M4): $(am__aclocal_m4_deps)
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(am__aclocal_m4_deps):
install-man1: $(man1_MANS)
@$(NORMAL_INSTALL)
@list1='$(man1_MANS)'; \
list2=''; \
test -n "$(man1dir)" \
&& test -n "`echo $$list1$$list2`" \
|| exit 0; \
echo " $(MKDIR_P) '$(DESTDIR)$(man1dir)'"; \
$(MKDIR_P) "$(DESTDIR)$(man1dir)" || exit 1; \
{ for i in $$list1; do echo "$$i"; done; \
if test -n "$$list2"; then \
for i in $$list2; do echo "$$i"; done \
| sed -n '/\.1[a-z]*$$/p'; \
fi; \
} | while read p; do \
if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
echo "$$d$$p"; echo "$$p"; \
done | \
sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \
-e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \
sed 'N;N;s,\n, ,g' | { \
list=; while read file base inst; do \
if test "$$base" = "$$inst"; then list="$$list $$file"; else \
echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man1dir)/$$inst'"; \
$(INSTALL_DATA) "$$file" "$(DESTDIR)$(man1dir)/$$inst" || exit $$?; \
fi; \
done; \
for i in $$list; do echo "$$i"; done | $(am__base_list) | \
while read files; do \
test -z "$$files" || { \
echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man1dir)'"; \
$(INSTALL_DATA) $$files "$(DESTDIR)$(man1dir)" || exit $$?; }; \
done; }
uninstall-man1:
@$(NORMAL_UNINSTALL)
@list='$(man1_MANS)'; test -n "$(man1dir)" || exit 0; \
files=`{ for i in $$list; do echo "$$i"; done; \
} | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \
-e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
dir='$(DESTDIR)$(man1dir)'; $(am__uninstall_files_from_dir)
tags TAGS:
ctags CTAGS:
cscope cscopelist:
distdir: $(BUILT_SOURCES)
$(MAKE) $(AM_MAKEFLAGS) distdir-am
distdir-am: $(DISTFILES)
@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
list='$(DISTFILES)'; \
dist_files=`for file in $$list; do echo $$file; done | \
sed -e "s|^$$srcdirstrip/||;t" \
-e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
case $$dist_files in \
*/*) $(MKDIR_P) `echo "$$dist_files" | \
sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
sort -u` ;; \
esac; \
for file in $$dist_files; do \
if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
if test -d $$d/$$file; then \
dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
if test -d "$(distdir)/$$file"; then \
find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
fi; \
if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
fi; \
cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
else \
test -f "$(distdir)/$$file" \
|| cp -p $$d/$$file "$(distdir)/$$file" \
|| exit 1; \
fi; \
done
check-am: all-am
check: check-am
all-am: Makefile $(MANS)
installdirs:
for dir in "$(DESTDIR)$(man1dir)"; do \
test -z "$$dir" || $(MKDIR_P) "$$dir"; \
done
install: install-am
install-exec: install-exec-am
install-data: install-data-am
uninstall: uninstall-am
install-am: all-am
@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
installcheck: installcheck-am
install-strip:
if test -z '$(STRIP)'; then \
$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
install; \
else \
$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
"INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
fi
mostlyclean-generic:
clean-generic:
distclean-generic:
-$(am__rm_f) $(CONFIG_CLEAN_FILES)
-test . = "$(srcdir)" || $(am__rm_f) $(CONFIG_CLEAN_VPATH_FILES)
maintainer-clean-generic:
@echo "This command is intended for maintainers to use"
@echo "it deletes files that may require special tools to rebuild."
clean: clean-am
clean-am: clean-generic mostlyclean-am
distclean: distclean-am
-rm -f Makefile
distclean-am: clean-am distclean-generic
dvi: dvi-am
dvi-am:
html: html-am
html-am:
info: info-am
info-am:
install-data-am: install-man
install-dvi: install-dvi-am
install-dvi-am:
install-exec-am:
install-html: install-html-am
install-html-am:
install-info: install-info-am
install-info-am:
install-man: install-man1
install-pdf: install-pdf-am
install-pdf-am:
install-ps: install-ps-am
install-ps-am:
installcheck-am:
maintainer-clean: maintainer-clean-am
-rm -f Makefile
maintainer-clean-am: distclean-am maintainer-clean-generic
mostlyclean: mostlyclean-am
mostlyclean-am: mostlyclean-generic
pdf: pdf-am
pdf-am:
ps: ps-am
ps-am:
uninstall-am: uninstall-man
uninstall-man: uninstall-man1
.MAKE: install-am install-strip
.PHONY: all all-am check check-am clean clean-generic cscopelist-am \
ctags-am distclean distclean-generic distdir dvi dvi-am html \
html-am info info-am install install-am install-data \
install-data-am install-dvi install-dvi-am install-exec \
install-exec-am install-html install-html-am install-info \
install-info-am install-man install-man1 install-pdf \
install-pdf-am install-ps install-ps-am install-strip \
installcheck installcheck-am installdirs maintainer-clean \
maintainer-clean-generic mostlyclean mostlyclean-generic pdf \
pdf-am ps ps-am tags-am uninstall uninstall-am uninstall-man \
uninstall-man1
.PRECIOUS: Makefile
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT:
# Tell GNU make to disable its built-in pattern rules.
%:: %,v
%:: RCS/%,v
%:: RCS/%
%:: s.%
%:: SCCS/s.%

5
docs/man/Makefile.am Normal file
View File

@ -0,0 +1,5 @@
man1_MANS = orca.1
EXTRA_DIST = \
$(man1_MANS)

557
docs/man/Makefile.in Normal file
View File

@ -0,0 +1,557 @@
# Makefile.in generated by automake 1.17 from Makefile.am.
# @configure_input@
# Copyright (C) 1994-2024 Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.
@SET_MAKE@
VPATH = @srcdir@
am__is_gnu_make = { \
if test -z '$(MAKELEVEL)'; then \
false; \
elif test -n '$(MAKE_HOST)'; then \
true; \
elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
true; \
else \
false; \
fi; \
}
am__make_running_with_option = \
case $${target_option-} in \
?) ;; \
*) echo "am__make_running_with_option: internal error: invalid" \
"target option '$${target_option-}' specified" >&2; \
exit 1;; \
esac; \
has_opt=no; \
sane_makeflags=$$MAKEFLAGS; \
if $(am__is_gnu_make); then \
sane_makeflags=$$MFLAGS; \
else \
case $$MAKEFLAGS in \
*\\[\ \ ]*) \
bs=\\; \
sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
| sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \
esac; \
fi; \
skip_next=no; \
strip_trailopt () \
{ \
flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
}; \
for flg in $$sane_makeflags; do \
test $$skip_next = yes && { skip_next=no; continue; }; \
case $$flg in \
*=*|--*) continue;; \
-*I) strip_trailopt 'I'; skip_next=yes;; \
-*I?*) strip_trailopt 'I';; \
-*O) strip_trailopt 'O'; skip_next=yes;; \
-*O?*) strip_trailopt 'O';; \
-*l) strip_trailopt 'l'; skip_next=yes;; \
-*l?*) strip_trailopt 'l';; \
-[dEDm]) skip_next=yes;; \
-[JT]) skip_next=yes;; \
esac; \
case $$flg in \
*$$target_option*) has_opt=yes; break;; \
esac; \
done; \
test $$has_opt = yes
am__make_dryrun = (target_option=n; $(am__make_running_with_option))
am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
am__rm_f = rm -f $(am__rm_f_notfound)
am__rm_rf = rm -rf $(am__rm_f_notfound)
pkgdatadir = $(datadir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
pkglibexecdir = $(libexecdir)/@PACKAGE@
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
INSTALL_HEADER = $(INSTALL_DATA)
transform = $(program_transform_name)
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
build_triplet = @build@
host_triplet = @host@
subdir = docs/man
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/m4/build-to-host.m4 \
$(top_srcdir)/m4/gettext.m4 $(top_srcdir)/m4/host-cpu-c-abi.m4 \
$(top_srcdir)/m4/iconv.m4 $(top_srcdir)/m4/intlmacosx.m4 \
$(top_srcdir)/m4/lib-ld.m4 $(top_srcdir)/m4/lib-link.m4 \
$(top_srcdir)/m4/lib-prefix.m4 $(top_srcdir)/m4/nls.m4 \
$(top_srcdir)/m4/pkg.m4 $(top_srcdir)/m4/po.m4 \
$(top_srcdir)/m4/progtest.m4 $(top_srcdir)/m4/yelp.m4 \
$(top_srcdir)/acinclude.m4 $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON)
mkinstalldirs = $(install_sh) -d
CONFIG_CLEAN_FILES =
CONFIG_CLEAN_VPATH_FILES =
AM_V_P = $(am__v_P_@AM_V@)
am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
am__v_P_0 = false
am__v_P_1 = :
AM_V_GEN = $(am__v_GEN_@AM_V@)
am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
am__v_GEN_0 = @echo " GEN " $@;
am__v_GEN_1 =
AM_V_at = $(am__v_at_@AM_V@)
am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
am__v_at_0 = @
am__v_at_1 =
SOURCES =
DIST_SOURCES =
am__can_run_installinfo = \
case $$AM_UPDATE_INFO_DIR in \
n|no|NO) false;; \
*) (install-info --version) >/dev/null 2>&1;; \
esac
am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
am__vpath_adj = case $$p in \
$(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
*) f=$$p;; \
esac;
am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
am__install_max = 40
am__nobase_strip_setup = \
srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
am__nobase_strip = \
for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
am__nobase_list = $(am__nobase_strip_setup); \
for p in $$list; do echo "$$p $$p"; done | \
sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
$(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
if (++n[$$2] == $(am__install_max)) \
{ print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
END { for (dir in files) print dir, files[dir] }'
am__base_list = \
sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
am__uninstall_files_from_dir = { \
{ test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
|| { echo " ( cd '$$dir' && rm -f" $$files ")"; \
$(am__cd) "$$dir" && echo $$files | $(am__xargs_n) 40 $(am__rm_f); }; \
}
man1dir = $(mandir)/man1
am__installdirs = "$(DESTDIR)$(man1dir)"
NROFF = nroff
MANS = $(man1_MANS)
am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
am__DIST_COMMON = $(srcdir)/Makefile.in
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
ACLOCAL = @ACLOCAL@
AMTAR = @AMTAR@
AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
ATKBRIDGE_CFLAGS = @ATKBRIDGE_CFLAGS@
ATKBRIDGE_LIBS = @ATKBRIDGE_LIBS@
ATSPI2_CFLAGS = @ATSPI2_CFLAGS@
ATSPI2_LIBS = @ATSPI2_LIBS@
AUTOCONF = @AUTOCONF@
AUTOHEADER = @AUTOHEADER@
AUTOMAKE = @AUTOMAKE@
AWK = @AWK@
CC = @CC@
CCDEPMODE = @CCDEPMODE@
CFLAGS = @CFLAGS@
CPP = @CPP@
CPPFLAGS = @CPPFLAGS@
CSCOPE = @CSCOPE@
CTAGS = @CTAGS@
CYGPATH_W = @CYGPATH_W@
DEFS = @DEFS@
DEPDIR = @DEPDIR@
ECHO_C = @ECHO_C@
ECHO_N = @ECHO_N@
ECHO_T = @ECHO_T@
ETAGS = @ETAGS@
EXEEXT = @EXEEXT@
GETTEXT_MACRO_VERSION = @GETTEXT_MACRO_VERSION@
GETTEXT_PACKAGE = @GETTEXT_PACKAGE@
GMSGFMT = @GMSGFMT@
GMSGFMT_015 = @GMSGFMT_015@
GSTREAMER_CFLAGS = @GSTREAMER_CFLAGS@
GSTREAMER_LIBS = @GSTREAMER_LIBS@
HELP_DIR = @HELP_DIR@
INSTALL = @INSTALL@
INSTALL_DATA = @INSTALL_DATA@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_SCRIPT = @INSTALL_SCRIPT@
INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
INTLLIBS = @INTLLIBS@
INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@
ITSTOOL = @ITSTOOL@
LDFLAGS = @LDFLAGS@
LIBICONV = @LIBICONV@
LIBINTL = @LIBINTL@
LIBOBJS = @LIBOBJS@
LIBS = @LIBS@
LN_S = @LN_S@
LOUIS_TABLE_DIR = @LOUIS_TABLE_DIR@
LTLIBICONV = @LTLIBICONV@
LTLIBINTL = @LTLIBINTL@
LTLIBOBJS = @LTLIBOBJS@
MAINT = @MAINT@
MAKEINFO = @MAKEINFO@
MKDIR_P = @MKDIR_P@
MSGFMT = @MSGFMT@
MSGMERGE = @MSGMERGE@
MSGMERGE_FOR_MSGFMT_OPTION = @MSGMERGE_FOR_MSGFMT_OPTION@
OBJEXT = @OBJEXT@
PACKAGE = @PACKAGE@
PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
PACKAGE_NAME = @PACKAGE_NAME@
PACKAGE_STRING = @PACKAGE_STRING@
PACKAGE_TARNAME = @PACKAGE_TARNAME@
PACKAGE_URL = @PACKAGE_URL@
PACKAGE_VERSION = @PACKAGE_VERSION@
PATH_SEPARATOR = @PATH_SEPARATOR@
PKG_CONFIG = @PKG_CONFIG@
PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@
PKG_CONFIG_PATH = @PKG_CONFIG_PATH@
PLATFORM_PATH = @PLATFORM_PATH@
POSUB = @POSUB@
PYGOBJECT_CFLAGS = @PYGOBJECT_CFLAGS@
PYGOBJECT_LIBS = @PYGOBJECT_LIBS@
PYTHON = @PYTHON@
PYTHON_EXEC_PREFIX = @PYTHON_EXEC_PREFIX@
PYTHON_PLATFORM = @PYTHON_PLATFORM@
PYTHON_PREFIX = @PYTHON_PREFIX@
PYTHON_VERSION = @PYTHON_VERSION@
REVISION = @REVISION@
SED = @SED@
SET_MAKE = @SET_MAKE@
SHELL = @SHELL@
STRIP = @STRIP@
USE_NLS = @USE_NLS@
VERSION = @VERSION@
XGETTEXT = @XGETTEXT@
XGETTEXT_015 = @XGETTEXT_015@
XGETTEXT_EXTRA_OPTIONS = @XGETTEXT_EXTRA_OPTIONS@
XMLLINT = @XMLLINT@
YELP_LC_DIST = @YELP_LC_DIST@
YELP_LC_MEDIA_LINKS = @YELP_LC_MEDIA_LINKS@
abs_builddir = @abs_builddir@
abs_srcdir = @abs_srcdir@
abs_top_builddir = @abs_top_builddir@
abs_top_srcdir = @abs_top_srcdir@
ac_ct_CC = @ac_ct_CC@
am__include = @am__include@
am__leading_dot = @am__leading_dot@
am__quote = @am__quote@
am__rm_f_notfound = @am__rm_f_notfound@
am__tar = @am__tar@
am__untar = @am__untar@
am__xargs_n = @am__xargs_n@
bindir = @bindir@
build = @build@
build_alias = @build_alias@
build_cpu = @build_cpu@
build_os = @build_os@
build_vendor = @build_vendor@
builddir = @builddir@
datadir = @datadir@
datarootdir = @datarootdir@
docdir = @docdir@
dvidir = @dvidir@
exec_prefix = @exec_prefix@
host = @host@
host_alias = @host_alias@
host_cpu = @host_cpu@
host_os = @host_os@
host_vendor = @host_vendor@
htmldir = @htmldir@
includedir = @includedir@
infodir = @infodir@
install_sh = @install_sh@
libdir = @libdir@
libexecdir = @libexecdir@
localedir = @localedir@
localedir_c = @localedir_c@
localedir_c_make = @localedir_c_make@
localstatedir = @localstatedir@
mandir = @mandir@
mkdir_p = @mkdir_p@
oldincludedir = @oldincludedir@
pdfdir = @pdfdir@
pkgpyexecdir = @pkgpyexecdir@
pkgpythondir = @pkgpythondir@
prefix = @prefix@
program_transform_name = @program_transform_name@
psdir = @psdir@
pyexecdir = @pyexecdir@
pythondir = @pythondir@
runstatedir = @runstatedir@
sbindir = @sbindir@
sharedstatedir = @sharedstatedir@
srcdir = @srcdir@
sysconfdir = @sysconfdir@
target_alias = @target_alias@
top_build_prefix = @top_build_prefix@
top_builddir = @top_builddir@
top_srcdir = @top_srcdir@
man1_MANS = orca.1
EXTRA_DIST = \
$(man1_MANS)
all: all-am
.SUFFIXES:
$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps)
@for dep in $?; do \
case '$(am__configure_deps)' in \
*$$dep*) \
( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
&& { if test -f $@; then exit 0; else break; fi; }; \
exit 1;; \
esac; \
done; \
echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu docs/man/Makefile'; \
$(am__cd) $(top_srcdir) && \
$(AUTOMAKE) --gnu docs/man/Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
@case '$?' in \
*config.status*) \
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
*) \
echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles)'; \
cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles);; \
esac;
$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(am__aclocal_m4_deps):
install-man1: $(man1_MANS)
@$(NORMAL_INSTALL)
@list1='$(man1_MANS)'; \
list2=''; \
test -n "$(man1dir)" \
&& test -n "`echo $$list1$$list2`" \
|| exit 0; \
echo " $(MKDIR_P) '$(DESTDIR)$(man1dir)'"; \
$(MKDIR_P) "$(DESTDIR)$(man1dir)" || exit 1; \
{ for i in $$list1; do echo "$$i"; done; \
if test -n "$$list2"; then \
for i in $$list2; do echo "$$i"; done \
| sed -n '/\.1[a-z]*$$/p'; \
fi; \
} | while read p; do \
if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
echo "$$d$$p"; echo "$$p"; \
done | \
sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \
-e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \
sed 'N;N;s,\n, ,g' | { \
list=; while read file base inst; do \
if test "$$base" = "$$inst"; then list="$$list $$file"; else \
echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man1dir)/$$inst'"; \
$(INSTALL_DATA) "$$file" "$(DESTDIR)$(man1dir)/$$inst" || exit $$?; \
fi; \
done; \
for i in $$list; do echo "$$i"; done | $(am__base_list) | \
while read files; do \
test -z "$$files" || { \
echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man1dir)'"; \
$(INSTALL_DATA) $$files "$(DESTDIR)$(man1dir)" || exit $$?; }; \
done; }
uninstall-man1:
@$(NORMAL_UNINSTALL)
@list='$(man1_MANS)'; test -n "$(man1dir)" || exit 0; \
files=`{ for i in $$list; do echo "$$i"; done; \
} | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \
-e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
dir='$(DESTDIR)$(man1dir)'; $(am__uninstall_files_from_dir)
tags TAGS:
ctags CTAGS:
cscope cscopelist:
distdir: $(BUILT_SOURCES)
$(MAKE) $(AM_MAKEFLAGS) distdir-am
distdir-am: $(DISTFILES)
@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
list='$(DISTFILES)'; \
dist_files=`for file in $$list; do echo $$file; done | \
sed -e "s|^$$srcdirstrip/||;t" \
-e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
case $$dist_files in \
*/*) $(MKDIR_P) `echo "$$dist_files" | \
sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
sort -u` ;; \
esac; \
for file in $$dist_files; do \
if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
if test -d $$d/$$file; then \
dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
if test -d "$(distdir)/$$file"; then \
find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
fi; \
if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
fi; \
cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
else \
test -f "$(distdir)/$$file" \
|| cp -p $$d/$$file "$(distdir)/$$file" \
|| exit 1; \
fi; \
done
check-am: all-am
check: check-am
all-am: Makefile $(MANS)
installdirs:
for dir in "$(DESTDIR)$(man1dir)"; do \
test -z "$$dir" || $(MKDIR_P) "$$dir"; \
done
install: install-am
install-exec: install-exec-am
install-data: install-data-am
uninstall: uninstall-am
install-am: all-am
@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
installcheck: installcheck-am
install-strip:
if test -z '$(STRIP)'; then \
$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
install; \
else \
$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
"INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
fi
mostlyclean-generic:
clean-generic:
distclean-generic:
-$(am__rm_f) $(CONFIG_CLEAN_FILES)
-test . = "$(srcdir)" || $(am__rm_f) $(CONFIG_CLEAN_VPATH_FILES)
maintainer-clean-generic:
@echo "This command is intended for maintainers to use"
@echo "it deletes files that may require special tools to rebuild."
clean: clean-am
clean-am: clean-generic mostlyclean-am
distclean: distclean-am
-rm -f Makefile
distclean-am: clean-am distclean-generic
dvi: dvi-am
dvi-am:
html: html-am
html-am:
info: info-am
info-am:
install-data-am: install-man
install-dvi: install-dvi-am
install-dvi-am:
install-exec-am:
install-html: install-html-am
install-html-am:
install-info: install-info-am
install-info-am:
install-man: install-man1
install-pdf: install-pdf-am
install-pdf-am:
install-ps: install-ps-am
install-ps-am:
installcheck-am:
maintainer-clean: maintainer-clean-am
-rm -f Makefile
maintainer-clean-am: distclean-am maintainer-clean-generic
mostlyclean: mostlyclean-am
mostlyclean-am: mostlyclean-generic
pdf: pdf-am
pdf-am:
ps: ps-am
ps-am:
uninstall-am: uninstall-man
uninstall-man: uninstall-man1
.MAKE: install-am install-strip
.PHONY: all all-am check check-am clean clean-generic cscopelist-am \
ctags-am distclean distclean-generic distdir dvi dvi-am html \
html-am info info-am install install-am install-data \
install-data-am install-dvi install-dvi-am install-exec \
install-exec-am install-html install-html-am install-info \
install-info-am install-man install-man1 install-pdf \
install-pdf-am install-ps install-ps-am install-strip \
installcheck installcheck-am installdirs maintainer-clean \
maintainer-clean-generic mostlyclean mostlyclean-generic pdf \
pdf-am ps ps-am tags-am uninstall uninstall-am uninstall-man \
uninstall-man1
.PRECIOUS: Makefile
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT:
# Tell GNU make to disable its built-in pattern rules.
%:: %,v
%:: RCS/%,v
%:: RCS/%
%:: s.%
%:: SCCS/s.%

334
docs/man/orca.1 Normal file
View File

@ -0,0 +1,334 @@
.\" Copyright (C) 2005-2009 Sun Microsystems Inc.
.\"
.\" This is free software; you may redistribute it and/or modify
.\" it under the terms of the GNU General Public License as
.\" published by the Free Software Foundation; either version 2,
.\" or (at your option) any later version.
.\"
.\" This is distributed in the hope that it will be useful, but
.\" WITHOUT ANY WARRANTY; without even the implied warranty of
.\" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
.\" GNU General Public License for more details.
.\"
.\" You should have received a copy of the GNU General Public License
.\" along with this; if not write to the Free Software Foundation, Inc.
.\" 51 Franklin Street, Fifth Floor, Boston MA 02110-1301 USA
'\"
.TH orca 1 "20 September 2013" "GNOME"
.SH NAME
orca \- a scriptable screen reader
.SH SYNOPSIS
.B orca
.RI [ option... ]
.SH DESCRIPTION
.B orca
is a screen reader for people with visual impairments,
it provides alternative access to the desktop by using speech synthesis and braille.
.P
.B orca
works with applications and toolkits that support
the Assistive Technology Service Provider Interface (AT-SPI), which
is the primary assistive technology infrastructure for Linux and
Solaris. Applications and toolkits supporting the AT-SPI include the
GNOME Gtk+ toolkit, the Java platform's Swing toolkit, LibreOffice,
Gecko, and WebKitGtk. AT-SPI support for the KDE Qt toolkit is being
pursued.
.SH OPTIONS
.TP
.B \-s, --setup
When starting
.BR orca ,
initiate the GUI-based configuration.
.TP
.BI "\-u, --user-prefs-dir=" dirname
When starting
.BR orca ,
use
.I dirname
as an alternate directory for the user preferences.
.TP
.BI "\-e, \-\-enable=" speech|braille|braille\-monitor
When starting
.BR orca ,
force the enabling of the supplied options.
.TP
.BI "\-d, \-\-disable=" speech|braille|braille\-monitor
When starting
.BR orca ,
force the disabling of the supplied options.
.TP
.B \-l, --list-apps
Prints the names of all the currently running applications. This
is used primarily for debugging purposes to see if
.B orca
can talk to the accessibility infrastructure. Note that if
.B orca
is already running, this will not kill the other
.B orca
process. It will just list the currently running applications,
and you will see
.B orca
listed twice: once for the existing
.B orca
and once for this instance.
.TP
.B \--debug
Enables debug output for
.B orca
and sends all debug output to a file with a name of the
form 'debug-YYYY-MM-DD-HH:MM:SS.out' in the current directory.
The YYYY-MM-DD-HH:MM:SS portion will be replaced with the current
date and time.
.TP
.BI "\--debug-file=" filename
Enables debug output for
.B orca
and sends all debug output to the given filename.
.TP
.B \-v, --version
outputs
.B orca
version number and exits.
.TP
.B \-h, \--help
displays
.B orca
help and exits.
.TP
.B \--replace
Replace a currently running
.BR orca
process. By default, if
.BR orca
detects an existing
.BR orca
process for the same session, it will not start a new
.BR orca
process. This option will kill and cleanup after any existing
.BR orca
process and then start a new
.BR orca
in its place.
.TP
.SH KEYBOARD SETTINGS
Orca provides two keyboard modes, Desktop and Laptop keyboard layout. The
.B Orca_Modifier
key is
.B Insert
in desktop keyboard layout and
.B Caps_Lock
in laptop keyboard layout.
.B Orca
uses default GNOME keyboard shortcuts to navigate the desktop and interact with various applications. The flat review commands provide an alternative method of interaction in certain inaccessible applications. It should not be confused with flat review functionality provided by other screen readers.
.SH Desktop Mode
.B Flat review commands
.B "Numpad-7"
move the flat review cursor to the previous line and read it.
.B "Numpad-8"
read the current line.
.B "Numpad-9"
move the flat review cursor to the next line and read it.
.B "Numpad-4"
move the flat review cursor to the previous word and read it.
.B "Numpad-5"
read the current word.
.B "Numpad-6"
move the flat review cursor to the next word and read it.
.B "Numpad-1"
move the flat review cursor to the previous character and read it.
.B "Numpad-2"
read the current character.
.B "Numpad-3"
move the flat review cursor to the next character and read it.
.B "Numpad-slash"
perform a left mouse click at the location of the flat review cursor.
.B "Numpad-star"
perform a right mouse click at the location of the flat review cursor.
.B Bookmark commands
.B "Alt+Insert+[1-6]"
assign a bookmark to a numbered slot. If a bookmark already exists in the slot it will be replaced with the new one.
.B "Insert+[1-6]"
go to the position pointed to by the bookmark bound to this numbered slot.
.B "Insert+B and Insert+Shift+B"
move between the given bookmarks for the given application or page.
.B "Alt+Insert+B"
save the defined bookmarks for the current application or page.
.B Miscellaneous functions
.B "Numpad+Plus"
'say all' command; reads from the current position of the caret to the end of the document.
.B "Numpad+Enter"
'Where am I' command; speaks information such as the title of the current application window, as well as the name of the control that currently has focus.
.B "Insert+H"
enter into orca's 'learn mode'; press Escape to exit.
.B "Insert+Shift+Backslash"
toggle live regions monitoring on and off.
.B "Insert+F"
speak font and attribute information for the current character.
.B "Insert+Space"
Launch the orca Configuration dialog.
.B "Insert+Ctrl+Space"
reload user settings and reinitialize services as necessary. Also launches the orca Configuration dialog for the current application.
.B "Insert+S"
toggle speech on and off.
.B "Insert+F11"
toggle the reading of tables, either by single cell or whole row.
.SH Laptop Mode
.B Flat review commands
.B "Caps_Lock+U"
move the flat review cursor to the previous line and read it. Double-click to move flat review to the top of the current window.
.B "Caps_Lock+I"
read the current line. Double-click to read the current line along with formatting and capitalization details.
.B "Caps_Lock+O"
move the flat review cursor to the next line and read it. Double- click to move flat review to the bottom of the current window.
.B "Caps_Lock+J"
move the flat review cursor to the previous word and read it. Double-click to move flat review to the word above the current word.
.B "Caps_Lock+K"
read the current word. Double-click to spell the word. Triple-click to hear the word spelled phonetically.
.B "Caps_Lock+L"
move the flat review cursor to the next word and read it. Double- click to move flat review to the word below the current word.
.B "Caps_Lock+M"
move the flat review cursor to the previous character and read it. Double-click to move flat review to the end of the current line.
.B "Caps_Lock+Comma"
read the current character. Double-click to pronounce the character phonetically if it is a letter.
.B "Caps_Lock+Period"
move the flat review cursor to the next character and read it.
.B "Caps_Lock+7"
perform a left mouse click at the location of the flat review cursor.
.B "Caps_Lock+8"
perform a right mouse click at the location of the flat review cursor.
.B Bookmark commands
.B "Alt+Caps_Lock+[1-6]"
add a bookmark to the numbered slot. If a bookmark already exists for the slot it will be replaced with the new one.
.B "Caps_Lock+[1-6]"
go to the position pointed to by the bookmark bound to this numbered slot.
.B "Caps_Lock+Band Caps_Lock+Shift+B"
move between the given bookmarks for the given application or page.
.B "Alt+Caps_Lock+B"
save the defined bookmarks for the current application or page.
.B Miscellaneous functions
.B "Caps_Lock+Semicolon"
'Say all' command; reads from the current position of the caret to the end of the document.
.B "Caps_Lock+Enter"
'Where am I' command; speaks information such as the title of the current application window, as well as the name of the control that currently has focus.
.B "Caps_Lock+H"
enter learn mode (press Escape to exit).
.B "Caps_Lock+Shift+Backslash"
toggle live regions monitoring on and off.
.B "Caps_Lock+F"
speak font and attribute information for the current character.
.B "Caps_Lock+Space"
launch the orca Configuration dialog.
.B "Caps_Lock+Ctrl+Space"
reload user settings and reinitialize services as necessary; also launches the orca Configuration dialog for the current application.
.B "Caps_Lock+S"
toggle speech on and off.
.B "Caps_Lock+F11"
toggle the reading of tables, either by single cell or whole row.
.SH FILES
.TP
.BI ~/.local/share/orca
.B Orca
user preferences directory
.TP
.BI ~/.local/share/orca/user-settings.conf
.B Orca
user preferences configuration file.
.TP
.BI ~/.local/share/orca/orca-customizations.py
.B Orca
user customizations configuration file
.TP
.BI ~/.local/share/orca/orca-scripts
.B Orca
user orca scripts directory
.TP
.BI ~/.local/share/orca/bookmarks
.B Orca
user bookmarks directory
.TP
.BI ~/.local/share/orca/app-settings
.B Orca
user application specific settings directory
.SH AUTHOR
.B Orca
originated as a community effort led by the Sun Microsystems Inc.
Accessibility Program Office and with contributions from many community members.
.SH SEE ALSO
For more information please visit
.B orca
wiki at
.UR http://live.gnome.org/Orca
<http://live.gnome.org/Orca>
.UE
.P
The
.B orca
mailing list
.UR http://mail.gnome.org/mailman/listinfo/orca-list
<http://mail.gnome.org/mailman/listinfo/orca-list>
To post a message to all
.B orca
list, send a email to orca-list@gnome.org

34
help/C/commands.page Normal file
View File

@ -0,0 +1,34 @@
<page xmlns="http://projectmallard.org/1.0/" type="guide" id="commands">
<info>
<link type="next" xref="commands_controlling_orca" />
<link type="guide" xref="index#quick_reference" />
<title type="sort">4. <app>Orca</app>'s Commands</title>
<title type="link">Commands</title>
<credit type="author">
<name>Joanmarie Diggs</name>
<email>joanied@gnome.org</email>
</credit>
<license>
<p>Creative Commons Share Alike 3.0</p>
</license>
</info>
<title><app>Orca</app>'s Commands</title>
<section id="getting_started" style="2column">
<title>Getting Started</title>
</section>
<section id="speech_braille" style="2column">
<title>Speech and Braille</title>
</section>
<section id="reading_documents" style="2column">
<title>Reading Web Pages and Other Documents</title>
</section>
<section id="reviewing_screen_contents" style="2column">
<title>Reviewing and Interacting with Screen Contents</title>
</section>
<section id="accessing_dynamic_information" style="2column">
<title>Accessing Dynamic Information</title>
</section>
<section id="troubleshooting">
<title>Troubleshooting</title>
</section>
</page>

View File

@ -0,0 +1,57 @@
<page xmlns="http://projectmallard.org/1.0/" type="topic" id="commands_bookmarks">
<info>
<link type="next" xref="commands_live_regions" />
<link type="guide" xref="commands#reviewing_screen_contents" />
<link type="seealso" xref="howto_bookmarks" />
<title type="sort">4. Bookmarks</title>
<title type="link">Bookmarks</title>
<desc>
Commands to bookmark and retrieve objects
</desc>
<credit type="author">
<name>Joanmarie Diggs</name>
<email>joanied@gnome.org</email>
</credit>
<license>
<p>Creative Commons Share Alike 3.0</p>
</license>
</info>
<title>Bookmark Commands</title>
<p>
<app>Orca</app> provides several commands which can be used to "bookmark"
a given object for the purpose of navigating back to it later.
</p>
<list>
<item>
<p>
Save a bookmark to the numbered slot: <keyseq><key>Orca Modifier</key>
<key>Alt</key><key>1</key></keyseq>-<key>6</key>
</p>
</item>
<item>
<p>
Save the defined bookmarks for the application or page:
<keyseq><key>Orca Modifier</key><key>Alt</key><key>B</key></keyseq>
</p>
</item>
<item>
<p>
Go to a specific, numbered bookmark: <keyseq><key>Orca Modifier</key>
<key>1</key></keyseq>-<key>6</key>
</p>
</item>
<item>
<p>
Go to the previous bookmark for the application or page:
<keyseq><key>Orca Modifier</key><key>Shift</key><key>B</key>
</keyseq>
</p>
</item>
<item>
<p>
Go to the next bookmark for the application or page:
<keyseq><key>Orca Modifier</key><key>B</key></keyseq>
</p>
</item>
</list>
</page>

View File

@ -0,0 +1,40 @@
<page xmlns="http://projectmallard.org/1.0/" type="topic" id="commands_braille">
<info>
<link type="next" xref="commands_reading" />
<link type="guide" xref="commands#speech_braille" />
<link type="seealso" xref="preferences_braille" />
<title type="sort">2. Braille</title>
<title type="link">Braille</title>
<desc>
Commands executable on braille displays
</desc>
<credit type="author">
<name>Joanmarie Diggs</name>
<email>joanied@gnome.org</email>
</credit>
<license>
<p>Creative Commons Share Alike 3.0</p>
</license>
</info>
<title>Braille Commands</title>
<p>
The following commands allow you to control <app>Orca</app> from your
refreshable braille display rather than your keyboard:
</p>
<list>
<item><p>Pan braille display to the left: Line Left</p></item>
<item><p>Pan braille display to the right: Line Right</p></item>
<item><p>Toggle flat review mode: Freeze</p></item>
<item><p>Review the word above: Line Up</p></item>
<item><p>Review the word below: Line Down</p></item>
<item><p>Review bottom left: Bottom Right</p></item>
<item><p>Review the home position: Top Left</p></item>
<item><p>Contracted braille: Six Dots</p></item>
<item><p>Marks the beginning of a text selection: Cut Begin</p></item>
<item><p>Marks the end of a text selection: Cut Line</p></item>
<item><p>Processes a cursor routing key: Cursor Routing</p></item>
<item><p>Returns to object with keyboard focus: Cursor Position</p></item>
</list>
</page>

52
help/C/commands_chat.page Normal file
View File

@ -0,0 +1,52 @@
<page xmlns="http://projectmallard.org/1.0/" type="topic" id="commands_chat">
<info>
<link type="next" xref="commands_debugging" />
<link type="guide" xref="commands#accessing_dynamic_information" />
<link type="seealso" xref="preferences_chat" />
<title type="sort">2. Chat</title>
<title type="link">Chat</title>
<desc>
Commands for use with IM and IRC clients
</desc>
<credit type="author">
<name>Joanmarie Diggs</name>
<email>joanied@gnome.org</email>
</credit>
<license>
<p>Creative Commons Share Alike 3.0</p>
</license>
</info>
<title>Chat Commands</title>
<p>
The following commands can be used to access information in the
instant messaging and internet relay chat clients supported by
<app>Orca</app>. You will notice that several of these commands
are "unbound." Please see <link xref="howto_key_bindings">Modifying
Keybindings</link> for information on how to bind these commands to
keystrokes.
</p>
<list>
<item>
<p>
Present previous chat room messages:
<keyseq><key>Orca Modifier</key><key>F1</key></keyseq> through <key>F9</key>
</p>
</item>
<item>
<p>
Enable/disable announcement of room name with messages: (Unbound)
</p>
</item>
<item>
<p>Enable/disable announcement of buddy typing status: (Unbound)</p>
</item>
<item>
<p>Enable/disable room-specific histories: (Unbound)</p>
</item>
</list>
</page>

View File

@ -0,0 +1,86 @@
<page xmlns="http://projectmallard.org/1.0/" type="topic" id="commands_controlling_orca">
<info>
<link type="next" xref="commands_where_am_i" />
<link type="guide" xref="commands#getting_started" />
<title type="sort">1. Controlling and Learning to Use Orca</title>
<title type="link">Controlling and Learning to Use Orca</title>
<desc>
Commands for interacting with <app>Orca</app>
</desc>
<credit type="author">
<name>Joanmarie Diggs</name>
<email>joanied@gnome.org</email>
</credit>
<license>
<p>Creative Commons Share Alike 3.0</p>
</license>
</info>
<title>Controlling and Learning to Use Orca</title>
<section id="controlling">
<title>Commands for Controlling <app>Orca</app></title>
<p>
The following commands can be used to get into <app>Orca</app>'s
Preferences dialogs, toggle <app>Orca</app> on and off, and bypass
<app>Orca</app> commands to avoid shortcut conflicts within the
application being accessed.
</p>
<list>
<item>
<p>
Toggle <app>Orca</app> on and off in GNOME:
<keyseq><key>Super</key><key>Alt</key><key>S</key></keyseq>.
</p>
<note style="tip">
<p>
If you are using <app>Orca</app> in another desktop environment in which
there is no command to toggle <app>Orca</app> on and off, you may find the
command to quit <app>Orca</app> helpful. This command is unbound by default.
Please see <link xref="howto_key_bindings">Modifying Keybindings</link> for
information on how to bind unbound commands.
</p>
</note>
</item>
<item>
<p>
<link xref="preferences">Orca Preferences</link> dialog:
<keyseq><key>Orca Modifier</key><key>Space</key></keyseq>.
</p>
</item>
<item>
<p>
Orca's Preferences dialog for the focused application:
<keyseq><key>Ctrl</key><key>Orca Modifier</key><key>Space</key></keyseq>.
</p>
</item>
<item>
<p>
Pass the next command on to the current application:
<keyseq><key>Orca Modifier</key><key>BackSpace</key></keyseq>
</p>
</item>
</list>
</section>
<section id="learning">
<title>Commands for Learning to Use <app>Orca</app></title>
<p>
In Learn Mode, <app>Orca</app> will announce each keystroke you pressed
along with any associated <app>Orca</app> command that keystroke is bound
to. In this mode, you can also get a list of shortcuts containing all the
<app>Orca</app> commands you can use.
</p>
<list>
<item>
<p>
Enter Learn Mode:
<keyseq><key>Orca Modifier</key><key>H</key></keyseq>
</p>
</item>
<item>
<p>
Exit Learn Mode:
<keyseq><key>Esc</key></keyseq>
</p>
</item>
</list>
</section>
</page>

View File

@ -0,0 +1,29 @@
<page xmlns="http://projectmallard.org/1.0/" type="topic" id="commands_debugging">
<info>
<link type="guide" xref="commands#troubleshooting" />
<title type="sort">1. Debugging</title>
<title type="link">Debugging</title>
<desc>
Commands for troubleshooting
</desc>
<credit type="author">
<name>Joanmarie Diggs</name>
<email>joanied@gnome.org</email>
</credit>
<license>
<p>Creative Commons Share Alike 3.0</p>
</license>
</info>
<title>Debugging Commands</title>
<p>
You may be asked by the developers to provide some debugging information in
order to help them identify the source of a problem you are experiencing.
The following command is not "bound" to a keystroke. If you need to bind it,
please see <link xref="howto_key_bindings">Modifying Keybindings</link>.
</p>
<list>
<item>
<p>Cycle to the next debug level: (Unbound)</p>
</item>
</list>
</page>

76
help/C/commands_find.page Normal file
View File

@ -0,0 +1,76 @@
<page xmlns="http://projectmallard.org/1.0/" type="topic" id="commands_find">
<info>
<link type="next" xref="commands_mouse" />
<link type="guide" xref="commands#reviewing_screen_contents" />
<link type="seealso" xref="howto_orca_find" />
<title type="sort">2. Orca Find</title>
<title type="link">Orca Find</title>
<desc>
Commands for searching window contents
</desc>
<credit type="author">
<name>Joanmarie Diggs</name>
<email>joanied@gnome.org</email>
</credit>
<license>
<p>Creative Commons Share Alike 3.0</p>
</license>
</info>
<title>Orca Find Commands</title>
<p>
<app>Orca</app>'s <link xref="howto_orca_find">Find feature</link> allows
you to search the <link xref="howto_flat_review">Flat Review</link> context
for elements located within the current window.
</p>
<list>
<item>
<p>Open the <app>Orca</app> Find dialog:</p>
<list>
<item>
<p>Desktop: <keyseq><key>KP Delete</key></keyseq></p>
</item>
<item>
<p>Laptop: <keyseq><key>Orca Modifier</key><key>Left Bracket</key></keyseq></p>
</item>
</list>
</item>
<item>
<p>Move flat review to the next instance of a string:</p>
<list>
<item>
<p>
Desktop:
<keyseq><key>Orca Modifier</key><key>KP Delete</key></keyseq>
</p>
</item>
<item>
<p>
Laptop:
<keyseq><key>Orca Modifier</key><key>Right Bracket</key></keyseq>
</p>
</item>
</list>
</item>
<item>
<p>Move flat review to the previous instance of a string:</p>
<list>
<item>
<p>
Desktop:
<keyseq>
<key>Orca Modifier</key><key>Shift</key><key>KP Delete</key>
</keyseq>
</p>
</item>
<item>
<p>
Laptop:
<keyseq>
<key>Orca Modifier</key><key>Ctrl</key><key>Right Bracket</key>
</keyseq>
</p>
</item>
</list>
</item>
</list>
</page>

View File

@ -0,0 +1,199 @@
<page xmlns="http://projectmallard.org/1.0/" type="topic" id="commands_flat_review">
<info>
<link type="next" xref="commands_find" />
<link type="guide" xref="commands#reviewing_screen_contents" />
<link type="seealso" xref="howto_flat_review" />
<title type="sort">1. Flat Review</title>
<title type="link">Flat Review</title>
<desc>
Commands for spatially reviewing windows
</desc>
<credit type="author">
<name>Joanmarie Diggs</name>
<email>joanied@gnome.org</email>
</credit>
<license>
<p>Creative Commons Share Alike 3.0</p>
</license>
</info>
<title>Flat Review Commands</title>
<p>
Orca's <link xref="howto_flat_review">Flat Review</link> commands are
designed for spatially reviewing elements displayed on the screen. They
also provide a means for reading the current line, word, and character
when navigating in the text of a document. Most of these commands are
"bound" to keystrokes. Please see <link xref="howto_key_bindings">Modifying
Keybindings</link> for information on how to bind unbound commands.
</p>
<section id="line">
<title>Commands for Reviewing by Line</title>
<list>
<item>
<p>First line (The "home" position):</p>
<list>
<item><p>Desktop: <keyseq><key>Orca Modifier</key><key>KP 7</key></keyseq></p></item>
<item><p>Laptop: <keyseq><key>Orca Modifier</key><key>Ctrl</key><key>U</key></keyseq></p></item>
</list>
</item>
<item>
<p>Previous line:</p>
<list>
<item><p>Desktop: <keyseq><key>KP 7</key></keyseq></p></item>
<item><p>Laptop: <keyseq><key>Orca Modifier</key><key>U</key></keyseq></p></item>
</list>
</item>
<item>
<p>Current line:</p>
<list>
<item><p>Desktop: <keyseq><key>KP 8</key></keyseq></p></item>
<item><p>Laptop: <keyseq><key>Orca Modifier</key><key>I</key></keyseq></p></item>
</list>
</item>
<item><p>Spell current line:</p>
<list>
<item><p>Desktop: <keyseq><key>KP 8</key></keyseq> (double-clicked)</p></item>
<item><p>Laptop: <keyseq><key>Orca Modifier</key><key>I</key></keyseq> (double-clicked)</p></item>
</list>
</item>
<item><p>Phonetically spell current line:</p>
<list>
<item><p>Desktop: <keyseq><key>KP 8</key></keyseq> (triple-clicked)</p></item>
<item><p>Laptop: <keyseq><key>Orca Modifier</key><key>I</key></keyseq> (triple-clicked)</p></item>
</list>
</item>
<item><p>Next line:</p>
<list>
<item><p>Desktop: <keyseq><key>KP 9</key></keyseq></p></item>
<item><p>Laptop: <keyseq><key>Orca Modifier</key><key>O</key></keyseq></p></item>
</list>
</item>
<item><p>Last line (The "end" position):</p>
<list>
<item><p>Desktop: <keyseq><key>Orca Modifier</key><key>KP 9</key></keyseq></p></item>
<item><p>Laptop: <keyseq><key>Orca Modifier</key><key>Ctrl</key><key>O</key></keyseq></p></item>
</list>
</item>
</list>
</section>
<section id="word">
<title>Commands for Reviewing by Word</title>
<list>
<item><p>Word above:</p>
<list>
<item><p>Desktop: <keyseq><key>Orca Modifier</key><key>KP 4</key></keyseq></p></item>
<item><p>Laptop: <keyseq><key>Orca Modifier</key><key>Ctrl</key><key>J</key></keyseq></p></item>
</list>
</item>
<item><p>Previous word:</p>
<list>
<item><p>Desktop: <keyseq><key>KP 4</key></keyseq></p></item>
<item><p>Laptop: <keyseq><key>Orca Modifier</key><key>J</key></keyseq></p></item>
</list>
</item>
<item><p>Current word:</p>
<list>
<item><p>Desktop: <keyseq><key>KP 5</key></keyseq></p></item>
<item><p>Laptop: <keyseq><key>Orca Modifier</key><key>K</key></keyseq></p></item>
</list>
</item>
<item><p>Spell current word:</p>
<list>
<item><p>Desktop: <keyseq><key>KP 5</key></keyseq> (double-clicked)</p></item>
<item><p>Laptop: <keyseq><key>Orca Modifier</key><key>K</key></keyseq> (double-clicked)</p></item>
</list>
</item>
<item><p>Phonetically spell current word:</p>
<list>
<item><p>Desktop: <keyseq><key>KP 5</key></keyseq> (triple-clicked)</p></item>
<item><p>Laptop: <keyseq><key>Orca Modifier</key><key>K</key></keyseq> (triple-clicked)</p></item>
</list>
</item>
<item><p>Next word:</p>
<list>
<item><p>Desktop: <keyseq><key>KP 6</key></keyseq></p></item>
<item><p>Laptop: <keyseq><key>Orca Modifier</key><key>L</key></keyseq></p></item>
</list>
</item>
<item><p>Word below:</p>
<list>
<item><p>Desktop: <keyseq><key>Orca Modifier</key><key>KP 6</key></keyseq></p></item>
<item><p>Laptop: <keyseq><key>Orca Modifier</key><key>Ctrl</key><key>L</key></keyseq></p></item>
</list>
</item>
</list>
</section>
<section id="character">
<title>Commands for Reviewing by Character</title>
<list>
<item><p>Previous character:</p>
<list>
<item><p>Desktop: <keyseq><key>KP 1</key></keyseq></p></item>
<item><p>Laptop: <keyseq><key>Orca Modifier</key><key>M</key></keyseq></p></item>
</list>
</item>
<item><p>Current character:</p>
<list>
<item><p>Desktop: <keyseq><key>KP 2</key></keyseq></p></item>
<item><p>Laptop: <keyseq><key>Orca Modifier</key><key>Comma</key></keyseq></p></item>
</list>
</item>
<item><p>Phonetically speak current character:</p>
<list>
<item><p>Desktop: <keyseq><key>KP 2</key></keyseq> (double-clicked)</p></item>
<item><p>Laptop: <keyseq><key>Orca Modifier</key><key>Comma</key></keyseq> (double-clicked)</p></item>
</list>
</item>
<item><p>Speak Unicode value of current character:</p>
<list>
<item><p>Desktop: <keyseq><key>KP 2</key></keyseq> (triple-clicked)</p></item>
<item><p>Laptop: <keyseq><key>Orca Modifier</key><key>Comma</key></keyseq> (triple-clicked)</p></item>
</list>
</item>
<item><p>Next character:</p>
<list>
<item><p>Desktop: <keyseq><key>KP 3</key></keyseq></p></item>
<item><p>Laptop: <keyseq><key>Orca Modifier</key><key>Period</key></keyseq></p></item>
</list>
</item>
<item><p>Last character on current line:</p>
<list>
<item><p>Desktop: <keyseq><key>Orca Modifier</key><key>KP 1</key></keyseq></p></item>
<item><p>Laptop: <keyseq><key>Orca Modifier</key><key>Ctrl</key><key>M</key></keyseq></p></item>
</list>
</item>
</list>
</section>
<section id="other">
<title>Additional Commands</title>
<list>
<item><p>Toggle flat review (refreshes the flat review context):</p>
<list>
<item><p>Desktop: <keyseq><key>Orca Modifier</key><key>KP Subtract</key></keyseq></p></item>
<item><p>Laptop: <keyseq><key>Orca Modifier</key><key>P</key></keyseq></p></item>
</list>
</item>
<item><p>Review current item/widget:</p>
<list>
<item><p>Desktop: <keyseq><key>Orca Modifier</key><key>KP 5</key></keyseq></p></item>
<item><p>Laptop: <keyseq><key>Orca Modifier</key><key>Ctrl</key><key>K</key></keyseq></p></item>
</list>
</item>
<item><p>Use Say All to review the current dialog or window:</p>
<list>
<item><p>Desktop: <key>KP Plus</key> (double-clicked)</p></item>
<item><p>Laptop: <keyseq><key>Orca Modifier</key><key>Semicolon</key></keyseq> (double-clicked)</p></item>
</list>
</item>
<item>
<p>
Copy the contents under flat review to the clipboard: (Unbound)
</p>
</item>
<item>
<p>
Append the contents under flat review to the clipboard: (Unbound)
</p>
</item>
</list>
</section>
</page>

View File

@ -0,0 +1,62 @@
<page xmlns="http://projectmallard.org/1.0/" type="topic" id="commands_live_regions">
<info>
<link type="next" xref="commands_chat" />
<link type="guide" xref="commands#accessing_dynamic_information" />
<link type="seealso" xref="howto_live_regions" />
<title type="sort">1. Live Regions</title>
<title type="link">Live Regions</title>
<desc>
Commands for accessing web live regions
</desc>
<credit type="author">
<name>Joanmarie Diggs</name>
<email>joanied@gnome.org</email>
</credit>
<license>
<p>Creative Commons Share Alike 3.0
</p>
</license>
</info>
<title>Live Region Commands</title>
<p>
The following commands can be used to access dynamically-updated
content on web pages which have been made accessible through ARIA.
</p>
<list>
<item>
<p>
Monitor live regions:
<keyseq><key>Orca Modifier</key><key>Shift</key><key>Backslash</key></keyseq>
</p>
</item>
<item>
<p>
Advance live region politeness setting: <key>Backslash</key>
</p>
</item>
<item>
<p>
Set default politeness level to off:
<keyseq><key>Shift</key><key>Backslash</key></keyseq>
</p>
</item>
<item>
<p>
Go to next/previous live region:
<keyseq><key>D</key></keyseq>/<keyseq><key>Shift</key><key>D</key></keyseq>
</p>
</item>
<item>
<p>
Go to last live region which made an announcement:
<keyseq><key>Y</key></keyseq>
</p>
</item>
<item>
<p>
Review live region announcements:
<keyseq><key>Orca Modifier</key><key>F1</key></keyseq> through <key>F9</key>
</p>
</item>
</list>
</page>

View File

@ -0,0 +1,72 @@
<page xmlns="http://projectmallard.org/1.0/" type="topic" id="commands_mouse">
<info>
<link type="next" xref="commands_bookmarks" />
<link type="guide" xref="commands#reviewing_screen_contents" />
<title type="sort">3. Mouse/Pointer-Related</title>
<title type="link">Mouse/Pointer-Related</title>
<link type="seealso" xref="howto_flat_review" />
<link type="seealso" xref="howto_mouse_review" />
<desc>
Commands for manipulating the pointer
</desc>
<credit type="author">
<name>Joanmarie Diggs</name>
<email>joanied@gnome.org</email>
</credit>
<license>
<p>Creative Commons Share Alike 3.0</p>
</license>
</info>
<title>Mouse/Pointer-Related Commands</title>
<p>
<app>Orca</app> provides several commands which can be used to manipulate
the mouse pointer and read the contents under it. All of the commands are
"bound" to keystrokes with one exception: Toggling Mouse Review Mode.
Please see <link xref="howto_key_bindings">Modifying Keybindings</link>
for information on how to bind this command to a keystroke.
</p>
<note style="tip">
<p>
Below you will see several references to "KP". All
"KP" keys are located on the numeric keypad. You will also notice that
there are different keystrokes depending upon whether you are using a
desktop or a laptop -- or more accurately, whether you are using
<app>Orca</app>'s Desktop keyboard layout or its Laptop keyboard layout.
For additional information, please see the
<link xref="howto_keyboard_layout">Keyboard Layout</link> topic.
</p>
</note>
<list>
<item>
<p>Left-click on current item:</p>
<list>
<item><p>Desktop: <keyseq><key>KP Divide</key></keyseq></p></item>
<item><p>Laptop: <keyseq><key>Orca Modifier</key><key>7</key></keyseq></p></item>
</list>
</item>
<item>
<p>Right-click on current item:</p>
<list>
<item><p>Desktop: <keyseq><key>KP Multiply</key></keyseq></p></item>
<item><p>Laptop: <keyseq><key>Orca Modifier</key><key>8</key></keyseq></p></item>
</list>
</item>
<item>
<p>Route pointer to current item:</p>
<list>
<item><p>Desktop: <keyseq><key>Orca Modifier</key><key>KP Divide</key></keyseq></p></item>
<item><p>Laptop: <keyseq><key>Orca Modifier</key><key>9</key></keyseq></p></item>
</list>
</item>
<item>
<p>Move focus into or away from the current mouse over (web only):</p>
<list>
<item><p>Desktop: <keyseq><key>Orca Modifier</key><key>KP Multiply</key></keyseq></p></item>
<item><p>Laptop: <keyseq><key>Orca Modifier</key><key>0</key></keyseq></p></item>
</list>
</item>
<item>
<p>Enable/disable mouse review mode: (Unbound)</p>
</item>
</list>
</page>

View File

@ -0,0 +1,35 @@
<page xmlns="http://projectmallard.org/1.0/" type="topic" id="commands_profiles">
<info>
<link type="next" xref="commands_speech_settings" />
<link type="guide" xref="commands#getting_started" />
<link type="seealso" xref="howto_profiles" />
<title type="sort">5. Profiles</title>
<title type="link">Profiles</title>
<desc>
Commands to access saved configurations
</desc>
<credit type="author">
<name>Joanmarie Diggs</name>
<email>joanied@gnome.org</email>
</credit>
<license>
<p>Creative Commons Share Alike 3.0</p>
</license>
</info>
<title>Profile Commands</title>
<p>
Profiles allow you to save and load multiple configurations so that you
can quickly access the settings you need.
</p>
<p>
The following command is not "bound" to a keystroke. If you would like to
bind it, please see <link xref="howto_key_bindings">Modifying Keybindings</link>.
</p>
<list>
<item>
<p>
Cycle to the next profile: (Unbound)
</p>
</item>
</list>
</page>

View File

@ -0,0 +1,294 @@
<page xmlns="http://projectmallard.org/1.0/" type="topic" id="commands_reading">
<info>
<link type="next" xref="commands_structural_navigation" />
<link type="guide" xref="commands#reading_documents" />
<link type="seealso" xref="howto_documents" />
<link type="seealso" xref="howto_text_attributes" />
<link type="seealso" xref="howto_whereami" />
<title type="sort">1. Reading</title>
<title type="link">Reading</title>
<desc>
Commands for accessing document content
</desc>
<credit type="author">
<name>Joanmarie Diggs</name>
<email>joanied@gnome.org</email>
</credit>
<license>
<p>Creative Commons Share Alike 3.0</p>
</license>
</info>
<title>Reading Commands</title>
<p>
In addition to the caret navigation commands which are part of GNOME,
<app>Orca</app> provides a number of commands which you can use to read a
document.
</p>
<note style="tip">
<p>
Below you will see several references to "KP". All
"KP" keys are located on the numeric keypad. You will also notice that
there are different keystrokes depending upon whether you are using a
desktop or a laptop -- or more accurately, whether you are using
<app>Orca</app>'s Desktop keyboard layout or its Laptop keyboard layout.
For additional information, please see the
<link xref="howto_keyboard_layout">Keyboard Layout</link> topic.
</p>
</note>
<section id="flat_review">
<title>Reading Your Current Location</title>
<p>
The following <app>Orca</app> <link xref="commands_flat_review">Flat
Review Commands</link> can be used to read your current location:
</p>
<list>
<item>
<p>Read the current line:</p>
<list>
<item>
<p>
Desktop: <keyseq><key>KP 8</key></keyseq>
</p>
</item>
<item>
<p>
Laptop: <keyseq><key>Orca Modifier</key><key>I</key></keyseq>
</p>
</item>
</list>
</item>
<item>
<p>Read the current word:</p>
<list>
<item>
<p>
Desktop: <keyseq><key>KP 5</key></keyseq>
</p>
</item>
<item>
<p>
Laptop: <keyseq><key>Orca Modifier</key><key>K</key></keyseq>
</p>
</item>
</list>
</item>
<item>
<p>Spell the current word:</p>
<list>
<item>
<p>
Desktop: <keyseq><key>KP 5</key></keyseq> (double-clicked)
</p>
</item>
<item>
<p>
Laptop: <keyseq><key>Orca Modifier</key><key>K</key></keyseq>
(double-clicked)
</p>
</item>
</list>
</item>
<item>
<p>Phonetically spell the current word:</p>
<list>
<item>
<p>
Desktop: <keyseq><key>KP 5</key></keyseq> (triple-clicked)
</p>
</item>
<item>
<p>
Laptop: <keyseq><key>Orca Modifier</key><key>K</key></keyseq>
(triple-clicked)
</p>
</item>
</list>
</item>
<item>
<p>Read the current character:</p>
<list>
<item>
<p>
Desktop: <keyseq><key>KP 2</key></keyseq>
</p>
</item>
<item>
<p>
Laptop: <keyseq><key>Orca Modifier</key><key>Comma</key></keyseq>
</p>
</item>
</list>
</item>
<item>
<p>Phonetically speak the current character:</p>
<list>
<item>
<p>
Desktop: <keyseq><key>KP 2</key></keyseq> (double-clicked)
</p>
</item>
<item>
<p>
Laptop: <keyseq><key>Orca Modifier</key><key>Comma</key></keyseq>
(double-clicked)
</p>
</item>
</list>
</item>
<item>
<p>Speak the Unicode value of current character:</p>
<list>
<item>
<p>
Desktop: <keyseq><key>KP 2</key></keyseq> (triple-clicked)
</p>
</item>
<item>
<p>
Laptop: <keyseq><key>Orca Modifier</key><key>Comma</key></keyseq>
(triple-clicked)
</p>
</item>
</list>
</item>
</list>
</section>
<section id="say_all">
<title>Say All</title>
<p>
Orca's Say All command will cause <app>Orca</app> to speak the
entire document beginning from your current location.
</p>
<list>
<item>
<p>Desktop: <key>KP Plus</key></p>
</item>
<item>
<p>
Laptop: <keyseq><key>Orca Modifier</key><key>Semicolon</key></keyseq>
</p>
</item>
</list>
</section>
<section id="attributes_and_selection">
<title>Text Attributes and Selected Text</title>
<p>
<app>Orca</app> has a dedicated command for obtaining the attributes of the
text at the caret location. In addition, if you use <app>Orca</app>'s
Where Am I commands from within a text object in which text has been
selected, <app>Orca</app> will announce the selected text. <app>Orca</app>'s
command to speak the current selection will also perform this function in a
text object.
</p>
<list>
<item>
<p>
Present the text attributes:
<keyseq><key>Orca Modifier</key><key>F</key></keyseq>
</p>
</item>
<item>
<p>Perform basic Where Am I:</p>
<list>
<item>
<p>
Desktop: <key>KP Enter</key>
</p>
</item>
<item>
<p>
Laptop: <keyseq><key>Orca Modifier</key><key>Return</key></keyseq>
</p>
</item>
</list>
</item>
<item>
<p>Perform detailed Where Am I:</p>
<list>
<item>
<p>
Desktop: <key>KP Enter</key> (double-clicked)
</p>
</item>
<item>
<p>
Laptop: <keyseq><key>Orca Modifier</key><key>Return</key></keyseq>
(double-clicked)
</p>
</item>
</list>
</item>
<item>
<p>
Speak current selection:
<keyseq><key>Orca Modifier</key><key>Shift</key><key>Up</key></keyseq>
</p>
</item>
</list>
</section>
<section id="link_details">
<title>Link Details</title>
<p>
If you are on a link, <app>Orca</app>'s Basic Where Am I command can be
used to announce the details associated with the link such as the link type,
if the link is visited, the site description, and file size. If you would
instead prefer a dedicated command for this purpose, you can bind <app>Orca</app>'s
Speak Link Details command to a keystroke. Please see <link xref="howto_key_bindings">
Modifying Keybindings</link> for information on how to do so.
</p>
<list>
<item>
<p>Speak the link details: (Unbound)</p>
</item>
</list>
</section>
<section id="browse_and_focus_modes">
<title>Browse and Focus Modes</title>
<p>
<app>Orca</app>'s Browse and Focus modes let you switch between reading and
interacting with web content.
</p>
<list>
<item>
<p>
Switch between browse mode and focus mode:
<keyseq><key>Orca Modifier</key><key>A</key></keyseq>
</p>
</item>
<item>
<p>
Enable sticky focus mode:
<keyseq><key>Orca Modifier</key><key>A</key></keyseq> (double-clicked)
</p>
</item>
<item>
<p>
Enable sticky browse mode:
<keyseq><key>Orca Modifier</key><key>A</key></keyseq> (triple-clicked)
</p>
</item>
</list>
</section>
<section id="toggling_layout_mode">
<title>Toggling Layout Mode</title>
<p>
When Layout mode is enabled, <app>Orca</app>'s caret navigation will respect
the on-screen layout of the content and present the full line, including any
links or form fields on that line. When Layout mode is disabled, <app>Orca</app>
will treat objects such as links and form fields as if they were on separate
lines, both for presentation and navigation.
</p>
<p>
<app>Orca</app> provides a command to switch between Layout mode and Object mode.
This command is unbound by default. Please see <link xref="howto_key_bindings">Modifying
Keybindings</link> for information on how to bind unbound commands.
</p>
<list>
<item>
<p>
Switch between Layout mode and Object mode: (Unbound)
</p>
</item>
</list>
</section>
</page>

View File

@ -0,0 +1,83 @@
<page xmlns="http://projectmallard.org/1.0/" type="topic" id="commands_speech_settings">
<info>
<link type="next" xref="commands_braille" />
<link type="guide" xref="commands#speech_braille" />
<link type="seealso" xref="preferences_speech" />
<title type="sort">2. Speech Settings</title>
<title type="link">Speech</title>
<desc>
Commands for customizing <app>Orca</app>'s output
</desc>
<credit type="author">
<name>Joanmarie Diggs</name>
<email>joanied@gnome.org</email>
</credit>
<license>
<p>Creative Commons Share Alike 3.0</p>
</license>
</info>
<title>Speech Settings Commands</title>
<p>
The following commands can be used to customize <app>Orca</app>'s
speech output. You will notice that a number of these commands are
"unbound." Please see <link xref="howto_key_bindings">Modifying
Keybindings</link> for information on how to bind these commands
to keystrokes.
</p>
<list>
<item>
<p>
Enable/disable speech: <keyseq><key>Orca Modifier</key><key>S</key></keyseq>
</p>
</item>
<item>
<p>
Toggle between cell and row reading in a table:
<keyseq><key>Orca Modifier</key><key>F11</key></keyseq>
</p>
</item>
<item>
<p>
Toggle between verbose and brief verbosity levels:
<keyseq><key>Orca Modifier</key><key>V</key></keyseq>
</p>
</item>
<item>
<p>
Enable/disable speaking of indentation and justification: (Unbound)
</p>
</item>
<item>
<p>Change the spoken number style: (Unbound)</p>
</item>
<item>
<p>Cycle to the next spoken punctuation level: (Unbound)</p>
</item>
<item>
<p>Cycle to the next key echo level: (Unbound)</p>
</item>
<item>
<p>Cycle to the next capitalization style: (Unbound)</p>
</item>
<item>
<p>Decrease the rate: (Unbound)</p>
</item>
<item>
<p>Increase the rate: (Unbound)</p>
</item>
<item>
<p>Decrease the pitch: (Unbound)</p>
</item>
<item>
<p>Increase the pitch: (Unbound)</p>
</item>
<item>
<p>Decrease the volume: (Unbound)</p>
</item>
<item>
<p>Increase the volume: (Unbound)</p>
</item>
</list>
</page>

View File

@ -0,0 +1,443 @@
<page xmlns="http://projectmallard.org/1.0/" type="topic" id="commands_structural_navigation">
<info>
<link type="next" xref="commands_table" />
<link type="guide" xref="commands#reading_documents" />
<link type="seealso" xref="howto_forms" />
<title type="sort">2. Structural Navigation</title>
<title type="link">Structural Navigation</title>
<desc>
Commands for navigating by elements
</desc>
<credit type="author">
<name>Joanmarie Diggs</name>
<email>joanied@gnome.org</email>
</credit>
<license>
<p>Creative Commons Share Alike 3.0</p>
</license>
</info>
<title>Structural Navigation Commands</title>
<p>
The following commands can be used to navigate by headings, links,
and other elements found in applications for which <app>Orca</app>
provides structural navigation support.
</p>
<list>
<item>
<p>
Enable/disable Structural Navigation keys:
<keyseq><key>Orca Modifier</key><key>Z</key></keyseq>
</p>
</item>
</list>
<section id="headings">
<title>Headings</title>
<list>
<item>
<p>
Next and previous heading:
<keyseq><key>H</key></keyseq> and
<keyseq><key>Shift</key><key>H</key></keyseq>
</p>
</item>
<item>
<p>
Display a list of headings:
<keyseq><key>Alt</key><key>Shift</key><key>H</key></keyseq>
</p>
</item>
<item>
<p>
Next and previous heading at level 1:
<keyseq><key>1</key></keyseq> and
<keyseq><key>Shift</key><key>1</key></keyseq>
</p>
</item>
<item>
<p>
Display a list of headings at level 1:
<keyseq><key>Alt</key><key>Shift</key><key>1</key></keyseq>
</p>
</item>
<item>
<p>
Next and previous heading at level 2:
<keyseq><key>2</key></keyseq> and
<keyseq><key>Shift</key><key>2</key></keyseq>
</p>
</item>
<item>
<p>
Display a list of headings at level 2:
<keyseq><key>Alt</key><key>Shift</key><key>2</key></keyseq>
</p>
</item>
<item>
<p>
Next and previous heading at level 3:
<keyseq><key>3</key></keyseq> and
<keyseq><key>Shift</key><key>3</key></keyseq>
</p>
</item>
<item>
<p>
Display a list of headings at level 3:
<keyseq><key>Alt</key><key>Shift</key><key>3</key></keyseq>
</p>
</item>
<item>
<p>
Next and previous heading at level 4:
<keyseq><key>4</key></keyseq> and
<keyseq><key>Shift</key><key>4</key></keyseq>
</p>
</item>
<item>
<p>
Display a list of headings at level 4:
<keyseq><key>Alt</key><key>Shift</key><key>4</key></keyseq>
</p>
</item>
<item>
<p>
Next and previous heading at level 5:
<keyseq><key>5</key></keyseq> and
<keyseq><key>Shift</key><key>5</key></keyseq>
</p>
</item>
<item>
<p>
Display a list of headings at level 5:
<keyseq><key>Alt</key><key>Shift</key><key>5</key></keyseq>
</p>
</item>
<item>
<p>
Next and previous heading at level 6:
<keyseq><key>6</key></keyseq> and
<keyseq><key>Shift</key><key>6</key></keyseq>
</p>
</item>
<item>
<p>
Display a list of headings at level 6:
<keyseq><key>Alt</key><key>Shift</key><key>6</key></keyseq>
</p>
</item>
</list>
</section>
<section id="forms">
<title>Forms</title>
<list>
<item>
<p>
Next and previous form field:
<keyseq><key>F</key></keyseq> and
<keyseq><key>Shift</key><key>F</key></keyseq>
</p>
</item>
<item>
<p>
Display a list of form fields:
<keyseq><key>Alt</key><key>Shift</key><key>F</key></keyseq>
</p>
</item>
<item>
<p>
Next and previous button:
<keyseq><key>B</key></keyseq> and
<keyseq><key>Shift</key><key>B</key></keyseq>
</p>
</item>
<item>
<p>
Display a list of buttons:
<keyseq><key>Alt</key><key>Shift</key><key>B</key></keyseq>
</p>
</item>
<item>
<p>
Next and previous combo box:
<keyseq><key>C</key></keyseq> and
<keyseq><key>Shift</key><key>C</key></keyseq>
</p>
</item>
<item>
<p>
Display a list of combo boxes:
<keyseq><key>Alt</key><key>Shift</key><key>C</key></keyseq>
</p>
</item>
<item>
<p>
Next and previous entry:
<keyseq><key>E</key></keyseq> and
<keyseq><key>Shift</key><key>E</key></keyseq>
</p>
</item>
<item>
<p>
Display a list of entries:
<keyseq><key>Alt</key><key>Shift</key><key>E</key></keyseq>
</p>
</item>
<item>
<p>
Next and previous radio button:
<keyseq><key>R</key></keyseq> and
<keyseq><key>Shift</key><key>R</key></keyseq>
</p>
</item>
<item>
<p>
Display a list of radio buttons:
<keyseq><key>Alt</key><key>Shift</key><key>R</key></keyseq>
</p>
</item>
<item>
<p>
Next and previous checkbox:
<keyseq><key>X</key></keyseq> and
<keyseq><key>Shift</key><key>X</key></keyseq>
</p>
</item>
<item>
<p>
Display a list of checkboxes:
<keyseq><key>Alt</key><key>Shift</key><key>X</key></keyseq>
</p>
</item>
</list>
</section>
<section id="links">
<title>Links</title>
<list>
<item>
<p>
Next and previous link:
<keyseq><key>K</key></keyseq> and
<keyseq><key>Shift</key><key>K</key></keyseq>
</p>
</item>
<item>
<p>
Display a list of links:
<keyseq><key>Alt</key><key>Shift</key><key>K</key></keyseq>
</p>
</item>
<item>
<p>
Next and previous unvisited link:
<keyseq><key>U</key></keyseq> and
<keyseq><key>Shift</key><key>U</key></keyseq>
</p>
</item>
<item>
<p>
Display a list of unvisited links:
<keyseq><key>Alt</key><key>Shift</key><key>U</key></keyseq>
</p>
</item>
<item>
<p>
Next and previous visited link:
<keyseq><key>V</key></keyseq> and
<keyseq><key>Shift</key><key>V</key></keyseq>
</p>
</item>
<item>
<p>
Display a list of visited links:
<keyseq><key>Alt</key><key>Shift</key><key>V</key></keyseq>
</p>
</item>
</list>
</section>
<section id="lists">
<title>Lists</title>
<list>
<item>
<p>
Next and previous list:
<keyseq><key>L</key></keyseq> and
<keyseq><key>Shift</key><key>L</key></keyseq>
</p>
</item>
<item>
<p>
Display a list of lists:
<keyseq><key>Alt</key><key>Shift</key><key>L</key></keyseq>
</p>
</item>
<item>
<p>
Next and previous list item:
<keyseq><key>I</key></keyseq> and
<keyseq><key>Shift</key><key>I</key></keyseq>
</p>
</item>
<item>
<p>
Display a list of list items:
<keyseq><key>Alt</key><key>Shift</key><key>I</key></keyseq>
</p>
</item>
</list>
</section>
<section id="tables">
<title>Tables</title>
<list>
<item>
<p>
Next and previous table:
<keyseq><key>T</key></keyseq> and
<keyseq><key>Shift</key><key>T</key></keyseq>
</p>
</item>
<item>
<p>
Display a list of tables:
<keyseq><key>Alt</key><key>Shift</key><key>T</key></keyseq>
</p>
</item>
<item>
<p>
Cell on left:
<keyseq><key>Alt</key><key>Shift</key><key>Left</key></keyseq>
</p>
</item>
<item>
<p>
Cell on right:
<keyseq><key>Alt</key><key>Shift</key><key>Right</key></keyseq>
</p>
</item>
<item>
<p>
Cell above:
<keyseq><key>Alt</key><key>Shift</key><key>Up</key></keyseq>
</p>
</item>
<item>
<p>
Cell below:
<keyseq><key>Alt</key><key>Shift</key><key>Down</key></keyseq>
</p>
</item>
<item>
<p>
First cell in table:
<keyseq><key>Alt</key><key>Shift</key><key>Home</key></keyseq>
</p>
</item>
<item>
<p>
Last cell in table:
<keyseq><key>Alt</key><key>Shift</key><key>End</key></keyseq>
</p>
</item>
</list>
</section>
<section id="text_blocks">
<title>Text Blocks</title>
<list>
<item>
<p>
Next and previous paragraph:
<keyseq><key>P</key></keyseq> and
<keyseq><key>Shift</key><key>P</key></keyseq>
</p>
</item>
<item>
<p>
Display a list of paragraphs:
<keyseq><key>Alt</key><key>Shift</key><key>P</key></keyseq>
</p>
</item>
<item>
<p>
Next and previous blockquote:
<keyseq><key>Q</key></keyseq> and
<keyseq><key>Shift</key><key>Q</key></keyseq>
</p>
</item>
<item>
<p>
Display a list of blockquotes:
<keyseq><key>Alt</key><key>Shift</key><key>Q</key></keyseq>
</p>
</item>
<item>
<p>
Next and previous "large object":
<keyseq><key>O</key></keyseq> and
<keyseq><key>Shift</key><key>O</key></keyseq>
</p>
</item>
<item>
<p>
Display a list of "large objects":
<keyseq><key>Alt</key><key>Shift</key><key>O</key></keyseq>
</p>
</item>
</list>
</section>
<section id="other">
<title>Other Elements</title>
<list>
<item>
<p>
Next and previous landmark:
<keyseq><key>M</key></keyseq> and
<keyseq><key>Shift</key><key>M</key></keyseq>
</p>
</item>
<item>
<p>
Display a list of landmarks:
<keyseq><key>Alt</key><key>Shift</key><key>M</key></keyseq>
</p>
</item>
<item>
<p>
Next and previous separator:
<keyseq><key>S</key></keyseq> and
<keyseq><key>Shift</key><key>S</key></keyseq>
</p>
</item>
<item>
<p>
Next and previous "clickable":
<keyseq><key>A</key></keyseq> and
<keyseq><key>Shift</key><key>A</key></keyseq>
</p>
</item>
<item>
<p>
Display a list of "clickables":
<keyseq><key>Alt</key><key>Shift</key><key>A</key></keyseq>
</p>
</item>
<item>
<p>
Next and previous image:
<keyseq><key>G</key></keyseq> and
<keyseq><key>Shift</key><key>G</key></keyseq>
</p>
</item>
<item>
<p>
Display a list of images:
<keyseq><key>Alt</key><key>Shift</key><key>G</key></keyseq>
</p>
</item>
<item>
<p>
Start and end of current container:
<keyseq><key>Shift</key><key>Comma</key></keyseq> and
<keyseq><key>Comma</key></keyseq>
</p>
</item>
</list>
</section>
</page>

View File

@ -0,0 +1,57 @@
<page xmlns="http://projectmallard.org/1.0/" type="topic" id="commands_table">
<info>
<link type="next" xref="commands_flat_review" />
<link type="guide" xref="commands#reading_documents" />
<link type="seealso" xref="howto_tables" />
<title type="sort">3. Table Navigation</title>
<title type="link">Table Navigation</title>
<desc>
Commands for accessing tabular information
</desc>
<credit type="author">
<name>Joanmarie Diggs</name>
<email>joanied@gnome.org</email>
</credit>
<license>
<p>Creative Commons Share Alike 3.0</p>
</license>
</info>
<title>Table Navigation Commands</title>
<p>
Orca's support for navigation by table cell is part of its
<link xref="commands_structural_navigation#tables">Structural Navigation
commands</link>. In addition you can:
</p>
<list>
<item>
<p>
Set dynamic row headers to current column:
<keyseq><key>Orca Modifier</key><key>C</key></keyseq>
</p>
</item>
<item>
<p>
Set dynamic column headers to current row:
<keyseq><key>Orca Modifier</key><key>R</key></keyseq>
</p>
</item>
<item>
<p>
Clear dynamic row headers:
<keyseq><key>Orca Modifier</key><key>C</key></keyseq> (double-clicked)
</p>
</item>
<item>
<p>
Clear dynamic column headers:
<keyseq><key>Orca Modifier</key><key>R</key></keyseq> (double-clicked)
</p>
</item>
<item>
<p>
Toggle between cell and row reading in a table:
<keyseq><key>Orca Modifier</key><key>F11</key></keyseq>
</p>
</item>
</list>
</page>

View File

@ -0,0 +1,63 @@
<page xmlns="http://projectmallard.org/1.0/" type="topic" id="commands_time_date_notifications">
<info>
<link type="next" xref="commands_profiles" />
<link type="guide" xref="commands#getting_started" />
<link type="seealso" xref="howto_notifications" />
<title type="sort">4. Time, Date, and Notification</title>
<title type="link">Time, Date, and Notification</title>
<desc>
Commands for getting the time, date, and notification messages
</desc>
<credit type="author">
<name>Joanmarie Diggs</name>
<email>joanied@gnome.org</email>
</credit>
<license>
<p>Creative Commons Share Alike 3.0</p>
</license>
</info>
<title>Time, Date, and Notification Commands</title>
<p>
The following commands can be used to obtain the current time and date
and to review previously-displayed notification messages:
</p>
<section id="time_and_date">
<title>Obtaining the Time and Date</title>
<list>
<item>
<p>
Present the time: <keyseq><key>Orca Modifier</key><key>T</key></keyseq>
</p>
</item>
<item>
<p>
Present the date: <keyseq><key>Orca Modifier</key><key>T</key></keyseq>
(double-clicked)
</p>
</item>
</list>
</section>
<section id="notifications">
<title>Reviewing Notification Messages</title>
<p>
Orca has three unbound commands for accessing previously-displayed
<link xref="howto_notifications">notification messages</link>. Please
see <link xref="howto_key_bindings">Modifying Keybindings</link> for
information on how to bind these commands to keystrokes.
</p>
<list>
<item>
<p>Present the last (most recent) notification message: (Unbound)</p>
</item>
<item>
<p>Present the previous notification message: (Unbound)</p>
</item>
<item>
<p>Present the next notification message: (Unbound)</p>
</item>
<item>
<p>Present list of all notification messages: (Unbound)</p>
</item>
</list>
</section>
</page>

View File

@ -0,0 +1,97 @@
<page xmlns="http://projectmallard.org/1.0/" type="topic" id="commands_where_am_i">
<info>
<link type="next" xref="commands_time_date_notifications" />
<link type="guide" xref="commands#getting_started" />
<link type="seealso" xref="howto_whereami" />
<title type="sort">3. Where Am I</title>
<title type="link">Where Am I</title>
<desc>
Commands to learn about your location
</desc>
<credit type="author">
<name>Joanmarie Diggs</name>
<email>joanied@gnome.org</email>
</credit>
<license>
<p>Creative Commons Share Alike 3.0</p>
</license>
</info>
<title>Where Am I Commands</title>
<p>
<app>Orca</app>'s Where Am I feature gives you context-sensitive details
about your present location. For instance, in tables, Where Am I will give
you details about the table cell you are in, but in text it will present
the current line along with any text which happens to be selected. The full
list of what you can expect <app>Orca</app> to present can be found in the
<link xref="howto_whereami">Introduction to Where Am I</link>.
</p>
<p><app>Orca</app> provides the following Where Am I commands:</p>
<list>
<item>
<p>Perform basic Where Am I:</p>
<list>
<item>
<p>Desktop: <key>KP Enter</key></p>
</item>
<item>
<p>Laptop: <keyseq><key>Orca Modifier</key><key>Return</key></keyseq></p>
</item>
</list>
</item>
<item>
<p>Perform detailed Where Am I:</p>
<list>
<item>
<p>Desktop: <key>KP Enter</key> (double-clicked)</p>
</item>
<item>
<p>
Laptop: <keyseq><key>Orca Modifier</key><key>Return</key></keyseq>
(double-clicked)
</p>
</item>
</list>
</item>
</list>
<p>
In addition to the dedicated Where Am I commands, <app>Orca</app> has
additional commands related to obtaining information about your present location:
</p>
<list>
<item>
<p>Present the title bar:</p>
<list>
<item>
<p>
Desktop: <keyseq><key>Orca Modifier</key><key>KP Enter</key></keyseq>
</p>
</item>
<item>
<p>
Laptop: <keyseq><key>Orca Modifier</key><key>Slash</key></keyseq>
</p>
</item>
</list>
</item>
<item>
<p>Present the status bar:</p>
<list>
<item>
<p>
Desktop: <keyseq><key>Orca Modifier</key><key>KP Enter</key></keyseq>
(double-clicked)
</p>
</item>
<item>
<p>
Laptop: <keyseq><key>Orca Modifier</key><key>Slash</key></keyseq>
(double-clicked)
</p>
</item>
<item>
<p>Present size and location of current object in pixels: (Unbound)</p>
</item>
</list>
</item>
</list>
</page>

Binary file not shown.

After

Width:  |  Height:  |  Size: 2.2 KiB

View File

@ -0,0 +1,54 @@
<page xmlns="http://projectmallard.org/1.0/" type="topic" id="howto_bookmarks">
<info>
<link type="guide" xref="index#reviewing"/>
<title type="sort">6. Bookmarks</title>
<desc>Storing and retrieving objects</desc>
<credit type="author">
<name>Joanmarie Diggs</name>
<email>joanied@gnome.org</email>
</credit>
<license>
<p>Creative Commons Share Alike 3.0</p>
</license>
</info>
<title>Bookmarks</title>
<p>
<app>Orca</app>'s Bookmarks support allows you to indicate that an object
is of interest. It includes the following features:
</p>
<list>
<item>
<p>
You are not limited to a single object: You can set up to six bookmarks
per environment. You can also save bookmarks so that they will persist
from Orca session to Orca session.
</p>
</item>
<item>
<p>
Having set a bookmark you can navigate to it later, and do so regardless
of whether or not you have chosen to permanently save the bookmarks
associated with your current environment. Navigation can be based on the
number of the bookmark should you wish to jump directly to a specific
item. Alternatively, you can navigate to the next or previous bookmark
just like you can a <link xref="howto_structural_navigation">Structural
Navigation</link> object.
</p>
</item>
<item>
<p>
Bookmarkable objects can be widgets within an application or objects on
the web page you are reading. Which environment you are in determines
what happens as you navigate amongst bookmarks: If you are in web
content, the caret will be moved to the bookmark so that you can
continue reading; otherwise, <link xref="howto_flat_review">Flat
Review</link> will be activated with the bookmark becoming the current
review item.
</p>
</item>
</list>
<p>
The specific keybindings associated with each of the above tasks can be
found in <link xref="commands_bookmarks">Bookmark Commands</link>.
</p>
</page>

View File

@ -0,0 +1,67 @@
<page xmlns="http://projectmallard.org/1.0/" type="topic" id="howto_documents">
<info>
<link type="guide" xref="index#reading"/>
<link type="next" xref="howto_text_attributes" />
<title type="sort">1. Documents</title>
<desc>
Reading content
</desc>
<credit type="author">
<name>Joanmarie Diggs</name>
<email>joanied@gnome.org</email>
</credit>
<license>
<p>Creative Commons Share Alike 3.0</p>
</license>
</info>
<title>Documents</title>
<p>
To read the contents of any document, use the application's built-in caret
navigation mode. As you navigate within the text of the document, <app>Orca</app>
will present your new location. As a result, you are likely already familiar with
how to read a document using <app>Orca</app>. For instance:
</p>
<list>
<item>
<p>
Use <key>Left</key> and <key>Right</key> to move and read by character.
</p>
</item>
<item>
<p>
Use <keyseq><key>Ctrl</key><key>Left</key></keyseq> and
<keyseq><key>Ctrl</key><key>Right</key></keyseq> to move and read by word.
</p>
</item>
<item>
<p>
Use <key>Up</key> and <key>Down</key> to move and read by line.
</p>
</item>
<item>
<p>
Use <key>Shift</key> in combination with the above commands to select and
unselect text.
</p>
</item>
</list>
<note style="tip">
<title>Enabling Caret Navigation in an Application</title>
<p>
Not all applications have caret navigation enabled by default. For many GNOME
applications, caret navigation can be toggled on and off by pressing <key>F7</key>.
</p>
</note>
<p>
In addition to reading a document by caret navigation, you may find it helpful
to read, spell, and obtain the Unicode value for the current text. You can do
these things through <app>Orca</app>'s <link xref="howto_flat_review">Flat
Review feature</link>.
</p>
<p>
Finally, in order to have <app>Orca</app> speak the entire document from your
present location, use the Say All command. It, along with a more complete
listing of <app>Orca</app>'s commands for accessing document text, can
be found in the <link xref="commands_reading">Reading Commands</link> guide.
</p>
</page>

View File

@ -0,0 +1,46 @@
<page xmlns="http://projectmallard.org/1.0/" type="topic" id="howto_flat_review">
<info>
<link type="guide" xref="index#reviewing"/>
<link type="next" xref="howto_orca_find" />
<title type="sort">2. Flat Review</title>
<desc>Examining a window spatially</desc>
<credit type="author">
<name>Joanmarie Diggs</name>
<email>joanied@gnome.org</email>
</credit>
<license>
<p>Creative Commons Share Alike 3.0</p>
</license>
</info>
<title>Flat Review</title>
<p>
<app>Orca</app>'s Flat Review feature allows you to spatially review the
contents, both text and widgets, of the active window. In this mode,
<app>Orca</app> treats the window as if it were a two-dimensional sheet of
text, eliminating any notion of widget hierarchy or other logical grouping
within the window.
</p>
<p>
The "flattened" contents, also known as the Flat Review context, can be
<link xref="commands_flat_review">navigated</link> by line, by word, by
character, and by object. In addition, you can perform a left-click or
right-click on the object being reviewed. Finally, you can use
<link xref="howto_orca_find">Orca Find</link>, a Flat-Review-based feature
to search the active window's contents.
</p>
<p>
Because the Flat Review context is a spatial representation of the active
window's contents, it is created when you first enter Flat Review and only
contains those objects which are visible. As a result, you will not be able
to use Flat Review to access items which are in the window but currently
off-screen. In addition, if the window's contents change of their own
accord, the Flat Review context will not automatically be updated. You can
cause a new context to be built by toggling Flat Review off and back on.
</p>
<p>
Finally, Flat Review by its nature is a mode that cannot be used at the same
time that <app>Orca</app> is tracking focus. Thus if you are in Flat Review
and then use the application's navigation commands to move the caret or to
give focus to another object, you will automatically leave Flat Review.
</p>
</page>

95
help/C/howto_forms.page Normal file
View File

@ -0,0 +1,95 @@
<page xmlns="http://projectmallard.org/1.0/" type="topic" id="howto_forms">
<info>
<link type="guide" xref="index#reading"/>
<link type="next" xref="howto_live_regions" />
<title type="sort">5. Filling out forms</title>
<desc>
Accessing widgets embedded in documents
</desc>
<credit type="author">
<name>Joanmarie Diggs</name>
<email>joanied@gnome.org</email>
</credit>
<license>
<p>Creative Commons Share Alike 3.0</p>
</license>
</info>
<title>Filling out forms</title>
<p>
When interacting with web pages and other documents using <app>Orca</app>,
you are interacting with the document itself; not a buffered copy of that
document. <app>Orca</app>'s browse and focus modes let you switch between
reading and filling out forms.
</p>
<section id="navigating_amongst_form_fields">
<title>Navigating Amongst Form Fields</title>
<p>
To navigate amongst form fields, you have several options:
</p>
<list>
<item>
<p>
Use <key>Tab</key> and <keyseq><key>Shift</key><key>Tab</key></keyseq>
to navigate amongst focusable objects, regardless of type.
</p>
</item>
<item>
<p>
Use <app>Orca</app>'s <link xref="commands_structural_navigation#forms">
structural navigation commands for forms</link>.
</p>
</item>
<item>
<p>
Depending on the form and the application, you may also be
able to use the arrow keys to navigate to a given form field.
</p>
</item>
</list>
<note style="tip">
<p>
In order to use <app>Orca</app>'s caret navigation or structural navigation
commands to navigate to a form field, you must be in browse mode. If you are
in focus mode, you can switch to browse mode by pressing <keyseq><key>Orca
Modifier</key><key>A</key></keyseq>.
</p>
</note>
</section>
<section id="exiting_form_fields">
<title>Exiting Form Fields</title>
<p>
To exit a form field, you have several options:
</p>
<list>
<item>
<p>
Use <key>Tab</key>/<keyseq><key>Shift</key><key>Tab</key></keyseq>
if you wish to leave the currently-focused form field and move to the
next/previous focusable object, regardless of type.
</p>
</item>
<item>
<p>
Use <app>Orca</app>'s <link xref="commands_structural_navigation#forms">
structural navigation commands for forms</link> to move to the next or
previous form field.
</p>
</item>
<item>
<p>
Depending on the form and the application, you may also be
able to use the arrow keys to navigate out of a given form field.
</p>
</item>
</list>
<note style="tip">
<p>
In order to use <app>Orca</app>'s caret navigation or structural navigation
commands to exit a form field, you must be in browse mode. If you are in
focus mode, you can switch to browse mode by pressing <keyseq><key>Orca
Modifier</key><key>A</key></keyseq>.
</p>
</note>
</section>
</page>

View File

@ -0,0 +1,141 @@
<page xmlns="http://projectmallard.org/1.0/" type="topic" id="howto_key_bindings">
<info>
<link type="guide" xref="index#getting_started"/>
<link type="next" xref="howto_profiles" />
<title type="sort">8. Keybindings</title>
<desc>Binding, rebinding, and unbinding commands</desc>
<credit type="author">
<name>Joanmarie Diggs</name>
<email>joanied@gnome.org</email>
</credit>
<license>
<p>Creative Commons Share Alike 3.0</p>
</license>
</info>
<title>Keybindings</title>
<p>
Orca has many commands, some of which are bound to a keystroke, others
of which are unbound. You can bind, rebind, and unbind <app>Orca</app>'s
commands by following the steps below.</p>
<steps>
<title>Binding an Unbound Command</title>
<item>
<p>
Get into the <link xref="preferences">Orca Preferences</link> dialog
by pressing <keyseq><key>Orca Modifier</key><key>Space</key></keyseq>.
</p>
</item>
<item>
<p>Move to the <gui>Key Bindings</gui> page.</p>
</item>
<item>
<p>
Arrow to the cell which contains the command you want to assign a
keystroke to.
</p>
</item>
<item>
<p>
Arrow once to the right. This will place focus in the <gui>Key
Binding</gui> column. Press <key>Return</key>.
</p>
</item>
<item>
<p>Press the desired key combination.</p></item>
<item>
<p>
Press <key>Return</key> to confirm the new combination. The new
keystroke will be saved and the check box in the last column (the
<gui>Modified</gui> column) will indicate that the key binding
has been modified.
</p>
</item>
<item>
<p>Press the <gui>Apply</gui> button.</p>
</item>
</steps>
<steps>
<title>Changing Existing Bindings</title>
<item>
<p>
Get into the <link xref="preferences">Orca Preferences</link> dialog by
pressing <keyseq><key>Orca Modifier</key><key>Space</key></keyseq>.
</p>
</item>
<item>
<p>Move to the <gui>Key Bindings</gui> page.</p>
</item>
<item>
<p>
Arrow to the cell which contains the binding you which to change and
press <key>Return</key>.
</p>
</item>
<item>
<p>Press the desired key combination.</p>
</item>
<item>
<p>
Press <key>Return</key> to confirm the new combination. The new
keystroke will be saved and the check box in the last column (the
<gui>Modified</gui> column) will indicate that the key binding has
been modified.
</p>
</item>
<item>
<p>Press the <gui>Apply</gui> button.</p>
</item>
</steps>
<steps>
<title>Restoring Original Bindings</title>
<item>
<p>
Get into the <link xref="preferences">Orca Preferences</link> dialog by
pressing <keyseq><key>Orca Modifier</key><key>Space</key></keyseq>.
</p>
</item>
<item>
<p>Move to the <gui>Key Bindings</gui> page.</p>
</item>
<item>
<p>Arrow to the modified column associated with the key binding.</p>
</item>
<item>
<p>Uncheck the checkbox by pressing <key>Space</key>.</p>
</item>
<item>
<p>Press the <gui>Apply</gui> button.</p>
</item>
</steps>
<steps>
<title>Unbinding Bound Commands</title>
<item>
<p>
Get into the <link xref="preferences">Orca Preferences</link> dialog by
pressing <keyseq><key>Orca Modifier</key><key>Space</key></keyseq>.
</p>
</item>
<item>
<p>Move to the <gui>Key Bindings</gui> page.</p>
</item>
<item>
<p>
Arrow to the cell which contains the binding you which to delete
and press <key>Return</key>.
</p>
</item>
<item>
<p>
When prompted for the new keybinding, press <key>Delete</key> or
<key>BackSpace</key>. You will be told that the key binding has
been removed.
</p>
</item>
<item>
<p>Press <key>Return</key> to confirm.</p>
</item>
<item>
<p>Press the <gui>Apply</gui> button.</p>
</item>
</steps>
</page>

View File

@ -0,0 +1,62 @@
<page xmlns="http://projectmallard.org/1.0/" type="topic" id="howto_keyboard_layout">
<info>
<link type="guide" xref="index#getting_started"/>
<link type="next" xref="howto_toggling_caps_lock" />
<title type="sort">6. Keyboard Layout</title>
<desc>Selecting the Desktop or Laptop layout</desc>
<credit type="author">
<name>Joanmarie Diggs</name>
<email>joanied@gnome.org</email>
</credit>
<license>
<p>Creative Commons Share Alike 3.0</p>
</license>
</info>
<title>Keyboard Layout</title>
<p>
Orca has two keyboard layouts: Desktop (i.e. with a numeric keypad) and
Laptop. The layout you choose impacts which key is used as the Orca Modifier.
</p>
<list>
<item>
<p>
If you are using the Laptop layout, the default Orca Modifier will be
<key>CapsLock</key>
</p>
</item>
<item>
<p>
If you are using the Desktop layout, the Orca Modifier will be both
<key>Insert</key> and <key>KP_Insert</key>, the latter being the
same key as <key>KP_0</key>.
</p>
</item>
</list>
<p>
The layout also determines the keystrokes associated with a number of
<app>Orca</app>'s commands, especially in the areas of Flat Review,
Where Am I, and Say All.
</p>
<steps>
<title>
Changing Your Keyboard Layout
</title>
<item>
<p>
Get into the <link xref="preferences">Orca Preferences</link> dialog
by pressing <keyseq><key>Orca Modifier</key><key>Space</key></keyseq>.
</p>
</item>
<item>
<p>
Move to the <gui>Keyboard Layout</gui> group of radio buttons.
</p>
</item>
<item>
<p>Arrow to the desired layout.</p>
</item>
<item>
<p>Press the <gui>Apply</gui> button.</p>
</item>
</steps>
</page>

View File

@ -0,0 +1,69 @@
<page xmlns="http://projectmallard.org/1.0/" type="topic" id="howto_learn_modes">
<info>
<link type="guide" xref="index#getting_started" />
<link type="next" xref="howto_keyboard_layout" />
<title type="sort">5. Learn Mode</title>
<desc>
Discovering <app>Orca</app>'s commands
</desc>
<credit type="author">
<name>Joanmarie Diggs</name>
<email>joanied@gnome.org</email>
</credit>
<license>
<p>Creative Commons Share Alike 3.0</p>
</license>
</info>
<title>Learn Mode</title>
<p>
In Learn Mode, <app>Orca</app> will announce each keystroke you pressed
along with any associated <app>Orca</app> command that keystroke is bound
to. In this mode, you can also get a list of shortcuts containing all the
<app>Orca</app> commands you can use.
</p>
<steps>
<title>Using Learn Mode</title>
<item>
<p>
Get into Learn Mode by pressing <keyseq><key>Orca Modifier</key>
<key>H</key></keyseq>.
</p>
</item>
<item>
<p>
Press any key or keystroke. <app>Orca</app> will announce the keys and
any associated command.
</p>
</item>
<item>
<p>Press <key>Esc</key> to exit Learn Mode.</p>
</item>
</steps>
<steps>
<title>Getting a List of Shortcuts</title>
<item>
<p>
Get into Learn Mode by pressing <keyseq><key>Orca Modifier</key>
<key>H</key></keyseq>.
</p>
</item>
<item>
<p>
Press <key>F2</key> if you want a list of shortcuts that apply
<app>Orca</app>-wide, or press <key>F3</key> if you want a list
of shortcuts that are specifically for the application with focus.
</p>
</item>
<item>
<p>
Press <key>Up</key> or <key>Down</key> to examine the contents of the
list.
</p>
</item>
<item>
<p>
Press <key>Esc</key> to exit the list.
</p>
</item>
</steps>
</page>

View File

@ -0,0 +1,60 @@
<page xmlns="http://projectmallard.org/1.0/" type="topic" id="howto_live_regions">
<info>
<link type="guide" xref="index#reading"/>
<link type="next" xref="howto_whereami" />
<title type="sort">6. Live Regions</title>
<desc>
Interacting with dynamic web content
</desc>
<credit type="author">
<name>Joanmarie Diggs</name>
<email>joanied@gnome.org</email>
</credit>
<license>
<p>Creative Commons Share Alike 3.0</p>
</license>
</info>
<title>Live Regions</title>
<p>
A live region is a dynamically-updated portion of a web page, such as a
table of sports statistics, a list of current stock prices, a log from
a chat, or an alert displayed by the page you are reading. While live
regions appear quite frequently, fully accessible web pages with live
regions are encountered less often. This problem is actively being
addressed by a number of organizations.
</p>
<section id="politeness_levels">
<title>Live Region Politeness Levels</title>
<p>
Live regions have an associated "politeness" level which is set by the
author as a means to convey the importance of the information and to
suggest when users should be informed by their assistive technology of
updates made within that region. Live regions can be "off", "polite", or
"assertive" to the point of being "rude."
</p>
</section>
<section id="orca_support">
<title><app>Orca</app>'s Support for Live Regions</title>
<p>
Because you might not agree with the politeness level specified by the
author whose page you are viewing, <app>Orca</app> provides a number of
<link xref="commands_live_regions">live region commands</link> which
allow you to modify the level of any or all of the regions on a page.
In addition, you can:
</p>
<list>
<item>
<p>Turn live region support on or off</p>
</item>
<item>
<p>Jump to the next and previous live region spatially</p>
</item>
<item>
<p>Jump to the last live region which presented information</p>
</item>
<item>
<p>Review the last nine live region messages which were presented</p>
</item>
</list>
</section>
</page>

View File

@ -0,0 +1,50 @@
<page xmlns="http://projectmallard.org/1.0/" type="topic" id="howto_mouse_review">
<info>
<link type="guide" xref="index#reviewing"/>
<link type="next" xref="howto_notifications" />
<title type="sort">4. Mouse Review</title>
<desc>Using the pointer to examine the screen</desc>
<credit type="author">
<name>Joanmarie Diggs</name>
<email>joanied@gnome.org</email>
</credit>
<license>
<p>Creative Commons Share Alike 3.0</p>
</license>
</info>
<title>Mouse Review</title>
<p>
<app>Orca</app>'s Mouse Review feature causes <app>Orca</app> to present
the object under the mouse pointer. Unlike <app>Orca</app>'s
<link xref="howto_flat_review">Flat Review</link> feature, Mouse Review
is not limited to the active window; instead, <app>Orca</app> will attempt
to identify what accessible object, if any, is visually under the pointer
as you move the mouse. If you have moved the pointer over an accessible
object with information to present, <app>Orca</app> will present that object
and its information to you.
</p>
<p>
Because enabling Mouse Review causes <app>Orca</app> to listen for, and then
process, all changes in the position of the Mouse Pointer, this feature is
disabled by default. To have it always enabled, check the <gui>Speak object
under mouse</gui> checkbox found on the
<link xref="preferences_general">General page of <app>Orca</app>'s
Preferences dialog</link>. In addition, you will find an unbound command
named <gui>Toggle mouse review mode</gui> on the
<link xref="preferences_key_bindings">Key Bindings page</link> of that same
dialog box. By binding this command, as described in the
<link xref="howto_key_bindings">Introduction to Key Bindings</link>,
you can enable and disable Mouse Review on an as-needed basis.
</p>
<note style="tip">
<title>
Default Settings and Keybindings Are Independent of One Another
</title>
<p>
Note that you can choose to have Mouse Review always enabled or not and
still toggle it on and off by binding and using the <gui>Toggle mouse
review mode</gui> command. It is not necessary to enable it in order to
toggle it because settings and keybindings are independent of one another.
</p>
</note>
</page>

View File

@ -0,0 +1,69 @@
<page xmlns="http://projectmallard.org/1.0/" type="topic" id="howto_notifications">
<info>
<link type="guide" xref="index#reviewing"/>
<link type="next" xref="howto_bookmarks" />
<title type="sort">5. Notifications</title>
<desc>Reading previously-received messages</desc>
<credit type="author">
<name>Joanmarie Diggs</name>
<email>joanied@gnome.org</email>
</credit>
<license>
<p>Creative Commons Share Alike 3.0</p>
</license>
</info>
<title>Notifications</title>
<p>
The GNOME Desktop includes a "notification area" which can be used by
applications to present information to the user. Examples of notifications
include incoming chat messages, the details associated with the song your
media player is starting to play, and warnings that your battery level is
getting low.
</p>
<p>
Because notifications are intended to present information to users without
interrupting what the user is doing, these messages tend to appear and
disappear relatively quickly. They are also not focusable. While
<app>Orca</app> will present these messages to you as they come in, it is
far too easy to interrupt <app>Orca</app>'s announcement accidentally by
continuing to type or to change focus. For this reason, <app>Orca</app> has
three commands which you can use to access previously-displayed notification
messages:
</p>
<list>
<item>
<p>Present the last (most recent) notification message</p>
</item>
<item>
<p>Present the previous notification message</p>
</item>
<item>
<p>Present list of all notification messages</p>
</item>
</list>
<p>
The first two commands are designed mainly for quick access to a message
you just received. The last command is the most powerful as it stores your
notification message history.
</p>
<p>
When you enter the list of notification messages, you will be told the size
of the list and prompted with the following choices:
</p>
<list>
<item><p>Press H for help.</p></item>
<item><p>Use Up, Down, Home or End to navigate in the list.</p></item>
<item><p>Press Escape to exit.</p></item>
<item><p>Press Space to repeat the last message read.</p></item>
<item><p>Press one digit to read a specific message.</p></item>
</list>
<p>
Note that the most recently-received message is at the top of the list.
</p>
<p>
Each of <app>Orca</app>'s notification review commands is unbound by
default. You can bind any or all of them to the shortcut or shortcuts
you choose. How to do so is described in the
<link xref="howto_key_bindings">Introduction to Key Bindings</link>.
</p>
</page>

112
help/C/howto_orca_find.page Normal file
View File

@ -0,0 +1,112 @@
<page xmlns="http://projectmallard.org/1.0/" type="topic" id="howto_orca_find">
<info>
<link type="guide" xref="index#reviewing"/>
<link type="next" xref="howto_mouse_review" />
<title type="sort">3. Orca Find</title>
<desc>Searching a window for objects</desc>
<credit type="author">
<name>Joanmarie Diggs</name>
<email>joanied@gnome.org</email>
</credit>
<license>
<p>Creative Commons Share Alike 3.0</p>
</license>
</info>
<title>Orca Find</title>
<p>
<app>Orca</app>'s Find feature is a
<link xref="howto_flat_review">Flat-Review</link>-based search designed to
help you quickly locate objects that are visible on-screen within the
current window.
</p>
<note style="tip">
<title>Activating Orca Find</title>
<p>
To open the Orca <gui>Find</gui> dialog, use the following command based
on your chosen <link xref="howto_keyboard_layout">keyboard layout</link>:
</p>
<list>
<item>
<p>Desktop: <keyseq><key>KP Delete</key></keyseq></p>
</item>
<item>
<p>Laptop:
<keyseq><key>Orca Modifier</key><key>Left Bracket</key></keyseq>
</p>
</item>
</list>
<p>
For a list of additional tasks you can perform, see the
<link xref="commands_find">Orca Find commands</link>
</p>
</note>
<p>
When you activate Orca Find, you will be placed in a dialog box.
</p>
<p>
Here you can specify the following items:
</p>
<list>
<item>
<p>The text to find</p>
</item>
<item>
<p>
The location from which to begin the search, which can either be
the current location or the top of the window
</p>
<p>
Default value of <gui>Start from</gui>: <gui>Current location</gui>
</p>
</item>
<item>
<p>
Whether or not capitalization should be taken into account when seeking
a match
</p>
<p>
Default value of <gui>Match case</gui>: not checked
</p>
</item>
<item>
<p>
Whether or not to limit matches to those which match the entire word
or phrase
</p>
<p>
Default value of <gui>Match entire word only</gui>: not checked
</p>
</item>
<item>
<p>
Whether Find should look down and/or to the right for the next
match or up and/or to the left.
</p>
<p>
Default value of <gui>Search backwards</gui>: not checked
</p>
</item>
<item>
<p>
Whether or not Find should wrap around to the top/bottom of the window
if there is no match found from the starting location in the direction
of the search.
</p>
<p>
Default value of <gui>Wrap around</gui>: checked
</p>
</item>
</list>
<p>
Having performed a search, you can quickly search for the next or previous
match without having to return to the Orca Find dialog box.
</p>
<p>
Because it is a <link xref="howto_flat_review">Flat Review</link> feature,
when there is a match, Flat Review will automatically be activated and the
matching item or text will become the current review item. Note that focus
within the application will not be modified, nor will the caret be
repositioned. If you need to accomplish either, please see
<link xref="commands_mouse">Orca's Mouse/Pointer-Related Commands</link>.
</p>
</page>

116
help/C/howto_profiles.page Normal file
View File

@ -0,0 +1,116 @@
<page xmlns="http://projectmallard.org/1.0/" type="topic" id="howto_profiles">
<info>
<link type="guide" xref="index#getting_started"/>
<link type="next" xref="howto_documents" />
<title type="sort">9. Profiles</title>
<desc>Maintaining multiple configurations</desc>
<credit type="author">
<name>Joanmarie Diggs</name>
<email>joanied@gnome.org</email>
</credit>
<license>
<p>Creative Commons Share Alike 3.0</p>
</license>
</info>
<title>Profiles</title>
<p>
Orca's profiles allow you to save and load multiple configurations so
that you can quickly access the settings you need.
</p>
<steps>
<title>Saving a New Profile</title>
<item>
<p>
Get into the <link xref="preferences">Orca Preferences</link> dialog box.
</p>
</item>
<item>
<p>Change whatever settings you wish.</p>
</item>
<item>
<p>
On the <gui>General</gui> page, press the <gui>Save As</gui> button.
</p>
</item>
<item>
<p>
Type the new profile name in the resulting <gui>Save Profile As</gui>
dialog box.
</p>
</item>
<item>
<p>
Press the <gui>OK</gui> button in the <gui>Save Profile As</gui>
dialog box.
</p>
</item>
</steps>
<steps>
<title>Loading an Existing Profile</title>
<item>
<p>
Get into the <link xref="preferences">Orca Preferences</link> dialog box.
</p>
</item>
<item>
<p>
On the <gui>General</gui> page, select the profile to load from the
<gui>Active Profile</gui> combo box.
</p>
</item>
<item>
<p>Press the <gui>Load</gui> button.</p>
</item>
<item>
<p>
You will be asked to confirm. Press the <gui>Yes</gui> button.
</p>
</item>
<item>
<p>Press the <gui>OK</gui> button.</p>
</item>
</steps>
<steps>
<title>Changing an Existing Profile</title>
<item>
<p>
Follow the steps described above to load the profile you wish to change.
</p>
</item>
<item>
<p>Follow the steps described above to save a new profile.</p>
</item>
<item>
<p>
When prompted for the new profile name, type the same name as current
profile. When you press the <gui>OK</gui> button, you will be told there
is a name conflict.
</p>
</item>
<item>
<p>
Press the <gui>Yes</gui> button to confirm you wish to overwrite the
existing profile with the new settings.
</p>
</item>
</steps>
<steps>
<title>Changing the <gui>Start-up Profile</gui></title>
<item>
<p>
Get into the <link xref="preferences">Orca Preferences</link> dialog box.
</p>
</item>
<item>
<p>
On the <gui>General</gui> page, select the profile to load from the
<gui>Start-up Profile</gui> combo box.
</p>
</item>
<item>
<p>Press the <gui>OK</gui> button. The next time you launch <app>Orca</app>,
the newly-selected profile will be used.
</p>
</item>
</steps>
</page>

View File

@ -0,0 +1,30 @@
<page xmlns="http://projectmallard.org/1.0/" type="topic" id="howto_setting_up_orca">
<info>
<link type="seealso" xref="preferences" />
<link type="guide" xref="index#getting_started" />
<link type="next" xref="howto_the_orca_modifier" />
<title type="sort">4. Orca Configuration</title>
<title type="link">Configuration</title>
<desc>
Setting up <app>Orca</app>
</desc>
<credit type="author">
<name>Joanmarie Diggs</name>
<email>joanied@gnome.org</email>
</credit>
<license>
<p>Creative Commons Share Alike 3.0</p>
</license>
</info>
<title>Orca Configuration</title>
<p>
If you want to configure <app>Orca</app>, get into the
<link xref="preferences">Preferences</link> dialog by pressing
<keyseq><key>Orca Modifier</key><key>Space</key></keyseq> from
within any accessible application. Alternatively, you can type
<cmd>orca</cmd> followed by either <cmd>-s</cmd> or <cmd>--setup</cmd>
in a terminal window or within the <gui>Run</gui> dialog and then press
<key>Return</key>.
</p>
</page>

View File

@ -0,0 +1,123 @@
<page xmlns="http://projectmallard.org/1.0/"
type="topic"
id="howto_structural_navigation">
<info>
<link type="guide" xref="index#reading"/>
<link type="next" xref="howto_tables" />
<title type="sort">3. Structural Navigation</title>
<desc>
Moving by heading and other elements
</desc>
<credit type="author">
<name>Joanmarie Diggs</name>
<email>joanied@gnome.org</email>
</credit>
<license>
<p>Creative Commons Share Alike 3.0</p>
</license>
</info>
<title>Structural Navigation</title>
<p>
<app>Orca</app>'s Structural Navigation feature allows you to navigate
amongst elements in a document. The types of elements by which you can
navigate include:
</p>
<list>
<item><p>Headings and other text blocks</p></item>
<item><p>Form controls</p></item>
<item><p>Links</p></item>
<item><p>Lists and list items</p></item>
<item><p>Landmarks, separators, and anchors</p></item>
<item><p>Tables and table cells</p></item>
</list>
<p>
A full list of individual elements and their associated keybindings can
be found in <link xref="commands_structural_navigation">Structural
Navigation Commands</link>.
</p>
<section id="applications">
<title>Supported Applications</title>
<p>
Currently, Structural Navigation is fully implemented for web content,
including the help content you are reading now. <app>Orca</app>'s
Structural Navigation support for table cells has also been implemented
for <app>OpenOffice Writer</app> and <app>LibreOffice Writer</app>.
Implementing the remainder of the Structural Navigation objects to
these office suites requires changes to be made by their respective
developers. Implementing any Structural Navigation features within
<app>Evince</app> will require a similar effort on the part of its
developers.
</p>
<note style="tip">
<title>Don't Forget To Toggle Structural Navigation On!</title>
<p>
Depending on where you are, it may be necessary for you to explicitly
toggle Structural Navigation on before you can use it.
</p>
</note>
<section id="toggling_required">
<title>When Toggling Structural Navigation On Is Required</title>
<p>
In web pages, explicitly toggling Structural Navigation on is
generally unnecessary because your interaction with the document
largely consists of reading its content. Thus there is no question
as to whether the 'H' you just pressed was meant to be a writing
command or a navigation command.
</p>
<p>
On the other hand, in editable documents such as those found in
<app>OpenOffice</app> and <app>LibreOffice</app>, it is far more
difficult for <app>Orca</app> to accurately predict what you expect
to have happen as a result of pressing 'H'. Therefore, before you
can use any Structural Navigation command in an editable document,
you must first toggle Structural Navigation on by pressing
<keyseq><key>Orca Modifier</key><key>Z</key></keyseq>.
When you are finished navigating and ready to resume writing, press
<keyseq><key>Orca Modifier</key><key>Z</key></keyseq> again to toggle
Structural Navigation off.
</p>
</section>
</section>
<section id="settings">
<title>Available Settings</title>
<p>
In addition to the aforementioned commands, <app>Orca</app> has a number
of configurable options available specifically for applications in which
there is structural navigation support.
</p>
<steps>
<title>Configuring Structural Navigation</title>
<item>
<p>
Give focus to an application for which <app>Orca</app> has
Structural Navigation support.
</p>
</item>
<item>
<p>
Get into the <link xref="preferences">Orca Preferences</link>
dialog box for the current application by pressing
<keyseq>
<key>Ctrl</key><key>Orca Modifier</key><key>Space</key>
</keyseq>.
</p>
</item>
<item>
<p>
Navigate to the last page of the dialog box which should be
named according to the name of your current application.
</p>
</item>
<item>
<p>
Examine and change the settings as you see fit.
</p>
</item>
<item>
<p>
Press the <gui>OK</gui> button.
</p>
</item>
</steps>
</section>
</page>

148
help/C/howto_tables.page Normal file
View File

@ -0,0 +1,148 @@
<page xmlns="http://projectmallard.org/1.0/" type="topic" id="howto_tables">
<info>
<link type="guide" xref="index#reading"/>
<link type="next" xref="howto_forms" />
<title type="sort">4. Tables</title>
<desc>
Navigating and setting dynamic headers
</desc>
<credit type="author">
<name>Joanmarie Diggs</name>
<email>joanied@gnome.org</email>
</credit>
<license>
<p>Creative Commons Share Alike 3.0</p>
</license>
</info>
<title>Tables</title>
<p>
<app>Orca</app> provides several features specifically designed to improve
access to tables found in web pages and other documents: configurable cell
versus row reading, <link xref="howto_structural_navigation">Structural
Navigation</link> and Dynamic Headers.
</p>
<section id="cell_row">
<title>Cell Versus Row Reading</title>
<p>
Consider the process of examining the list of messages in your Inbox.
In order to have Orca announce the sender, subject, date, and presence
of attachments you would need <app>Orca</app> to speak the row. On the
other hand, when navigating amongst rows in a spreadsheet, hearing the
full row may not be desired if for no other reason than the sheer number
of cells in each row. Thus in that case, you would want <app>Orca</app>
to only speak the cell with focus. Similar situations occur in document
tables.
</p>
<p>
<app>Orca</app> allows you to customize whether only the cell should be
read, or if the full row should be, for GUI tables, document tables,
and spreadsheets. Because these settings are independent of one another,
you do not have to choose one table reading mode to fit multiple types of
tables.
</p>
<p>
You can set each of <app>Orca</app>'s table reading preferences <app>Orca</app>
wide as well as on an application-by-application basis. How to do each is
described in the guide on <link xref="preferences"><app>Orca</app>'s preferences
dialogs</link>. The settings can be found on the <link xref="preferences_speech">
<gui>Speech</gui> page</link>.
</p>
<p>
Lastly, there is also an <app>Orca</app> command which allows you to toggle
cell versus row reading on the fly for the currently-active table:
<keyseq><key>Orca Modifier</key><key>F11</key></keyseq>.
</p>
</section>
<section id="structural_navigation">
<title>Structural Navigation</title>
<p>
<app>Orca</app>'s <link xref="commands_structural_navigation#tables">table
Structural Navigation commands</link> make it possible for you to quickly
locate tables, jump immediately to a table's first or last cell, and
move to the next cell in any direction.
</p>
<p>
As you navigate amongst and within tables using Structural Navigation,
<app>Orca</app> will announce additional details to help you understand
your position, such as the dimensions of the table you just entered and
the fact that you have reached the edge of the table in the direction you
are moving.
</p>
<p>
In addition, <app>Orca</app> provides configurable
<link xref="preferences_table_navigation">presentation options</link>
which work in conjunction with Structural Navigation and allow you to
control whether or not cell coordinates are presented, multiple cell spans
are indicated, and cell headers are announced.
</p>
<note style="tip">
<title>Don't Forget To Toggle Structural Navigation On!</title>
<p>
Depending on where you are, it may be necessary for you to explicitly
toggle Structural Navigation on before you can use it. To learn more, read
<link xref="howto_structural_navigation#toggling_required">
when toggling Structural Navigation on is required.</link>
</p>
</note>
</section>
<section id="dynamic_headers">
<title>Dynamic Headers</title>
<p>
Many of the tables you will encounter while reading have cells which serve
as the header for a row or a column. Whether or not the creator of that
table correctly marked those cells as headers is hard to say. In many
cases, the text was simply formatted to be larger and/or bold. And even if
the table is correctly marked up, that is no guarantee that the application
or toolkit exposes that text as header information to assistive technologies.
<app>Orca</app>'s Dynamic Header support makes it possible to overcome these
challenges.
</p>
<steps>
<title>Setting Column Headers</title>
<item>
<p>
Move to the row which contains all of the column headers.
</p>
</item>
<item>
<p>
Press <keyseq><key>Orca Modifier</key><key>R</key></keyseq> to tell
<app>Orca</app> that the current row is the one with the headers.
</p>
</item>
</steps>
<steps>
<title>Setting Row Headers</title>
<item>
<p>
Move to the column which contains all of the row headers.
</p>
</item>
<item>
<p>
Press <keyseq><key>Orca Modifier</key><key>C</key></keyseq> to tell
<app>Orca</app> that the current column is the one with the headers.
</p>
</item>
</steps>
<p>
Having set either the column headers or the row headers, you should find
that as you navigate amongst the cells, <app>Orca</app> will present each
header that has changed. Or to put it another way, <app>Orca</app> will
not present the column header over and over again as you move up or down
within the current column. Likewise, it will not present the row header
over and over again as you move left or right within the current row.
However, if you change rows and there are row headers, the header
associated with the new row will be presented. And if you change columns
and there are column headers, the header associated with the new column
will be presented.
</p>
<p>
To clear headers, simply double-click the command you used to set them.
Thus double-clicking <keyseq><key>Orca Modifier</key><key>R</key></keyseq>
tells <app>Orca</app> there are no column headers. Double-clicking
<keyseq><key>Orca Modifier</key><key>C</key></keyseq> tells <app>Orca</app>
there are no row headers.
</p>
</section>
</page>

View File

@ -0,0 +1,71 @@
<page xmlns="http://projectmallard.org/1.0/" type="topic" id="howto_text_attributes">
<info>
<link type="guide" xref="index#reading"/>
<link type="next" xref="howto_structural_navigation" />
<title type="sort">2. Text Attributes</title>
<desc>
Examining text formatting
</desc>
<credit type="author">
<name>Joanmarie Diggs</name>
<email>joanied@gnome.org</email>
</credit>
<license>
<p>Creative Commons Share Alike 3.0</p>
</license>
</info>
<title>Text Attributes</title>
<p>
The term "text attributes" refers to all of the font, style, alignment,
and other formatting associated with a given character or series of
characters.
</p>
<section id="obtaining">
<title>Obtaining Formatting Information</title>
<p>
When you press <keyseq><key>Orca Modifier</key><key>F</key>
</keyseq>, <app>Orca</app> will speak known text attribute
information about an object. In addition, <app>Orca</app>
will optionally indicate text attributes in braille by
"underlining" them as you navigate a document.
</p>
<p>
Because the number of text attributes is large, and not everyone cares
about every attribute, the <link xref="preferences_text_attributes">
Text Attributes page of the preferences dialog</link> allows you to
customize which text attributes <app>Orca</app> will present in speech,
along with the order in which they should be presented, and which ones
<app>Orca</app> will indicate in braille.
</p>
<p>
Because the <link xref="preferences_text_attributes">Text Attributes
page</link> is also part of the application-specific settings, you can
customize text attribute presentation on an as-needed basis for each
application you use.
</p>
</section>
<section id="identifying_misspelled_words">
<title>Identifying Misspelled Words</title>
<p>
Most applications and toolkits indicate that a word is misspelled by
underlining that word with a red, squiggly line. The presence of this line
is typically exposed to assistive technologies as a text attribute. As a
result, you will find spelling errors amongst the text attributes you can
choose. By default, the spelling error attribute is enabled for both
speech and braille and will therefore be presented along with any other
attributes whose indication you have enabled.
</p>
<p>
In addition to accessing the presence of spelling errors as a text
attribute, if you have key echo and/or word echo enabled and type a
word which is misspelled, when the spelling error indication appears,
<app>Orca</app> will announce "misspelled" so that you can immediately go
back and correct the error.
</p>
<p>
Finally, when you are navigating within a document and the caret moves
into a word which is misspelled, <app>Orca</app> will announce the
presence of the spelling error.
</p>
</section>
</page>

View File

@ -0,0 +1,75 @@
<page xmlns="http://projectmallard.org/1.0/" type="topic" id="howto_the_orca_modifier">
<info>
<link type="guide" xref="index#getting_started"/>
<link type="next" xref="howto_learn_modes" />
<title type="sort">3. The Orca Modifier</title>
<desc>
A key that works like <key>Shift</key>, <key>Ctrl</key>,
and <key>Alt</key>
</desc>
<credit type="author">
<name>Joanmarie Diggs</name>
<email>joanied@gnome.org</email>
</credit>
<license>
<p>Creative Commons Share Alike 3.0</p>
</license>
</info>
<title>The Orca Modifier</title>
<p>
Orca has a special modifier key that works like <key>Shift</key>,
<key>Ctrl</key>, and <key>Alt</key>. It is designed specifically
for performing <app>Orca</app> commands and doing so without
introducing conflicts with the commands of the applications you
are accessing.
</p>
<p>
Which key the "Orca Modifier" is bound to will, by default, depend
on whether you are using <app>Orca</app>'s Laptop keyboard layout
or its Desktop keyboard layout:
</p>
<list>
<item>
<p>
If you are using the Laptop layout, the default Orca Modifier
will be <key>CapsLock</key>
</p>
</item>
<item>
<p>
If you are using the Desktop layout, the Orca Modifier will
be both <key>Insert</key> and <key>KP_Insert</key>, the
latter being the same key as <key>KP_0</key>.
</p>
</item>
</list>
<p>
If you want to maintain your current keyboard layout but select a different
modifier key, you can do so by performing the following steps:
</p>
<steps>
<title>Changing the Orca Modifier</title>
<item>
<p>
Get into the <link xref="preferences">Orca Preferences</link> dialog by
pressing <keyseq><key>Orca Modifier</key><key>Space</key></keyseq>. Alternatively, you can start Orca with the preferences dialog open from a terminal: type <cmd>orca -s</cmd> and press <key>Return</key>.
</p>
</item>
<item>
<p>Move to the <gui>Key Bindings</gui> page.</p>
</item>
<item>
<p>Move to the <gui>Screen Reader Modifier Key(s)</gui> combobox.</p>
</item>
<item>
<p>Arrow to the desired modifier. The available options are:</p>
<list>
<item><p>Insert, KP_Insert</p></item>
<item><p>KP_Insert</p></item>
<item><p>Insert</p></item>
<item><p>Caps_Lock</p></item>
</list>
</item>
<item><p>Press the <gui>Apply</gui> button.</p></item>
</steps>
</page>

Some files were not shown because too many files have changed in this diff Show More