add debug

config/settings/settings-daemon.conf

@@ -0,0 +1,247 @@
+[sound]
+# Turn sound on or off:
+enabled=True
+
+# Select the driver used to play sounds, choices are genericDriver and gstreamerDriver.
+# Sox is the default.
+#driver=gstreamerDriver
+driver=genericDriver
+
+# Sound themes. These are the pack of sounds used for sound alerts.
+# Sound packs may be located at /usr/share/sounds
+# For system wide availability, or ~/.local/share/fenrirscreenreader/sounds
+# For the current user.
+theme=default
+
+# Sound volume controls how loud the sounds for your selected soundpack are.
+# 0 is quietest, 1.0 is loudest.
+volume=1.0
+
+# shell commands for generic sound driver
+# the folowing variable are substituted
+# fenrirVolume = the current volume setting
+# fenrirSoundFile = the soundfile for an soundicon
+# fenrirFrequence = the frequency to play
+# fenrirDuration = the duration of the frequency
+# the following command is used to play a soundfile
+genericPlayFileCommand=play -q -v fenrirVolume fenrirSoundFile
+#the following command is used to generate a frequency beep
+genericFrequencyCommand=play -q -v fenrirVolume -n -c1 synth fenrirDuration sine fenrirFrequence
+
+[speech]
+# Turn speech on or off:
+enabled=True
+
+# Select speech driver, options are speechdDriver (default), genericDriver or espeakDriver:
+#driver=speechdDriver
+#driver=espeakDriver
+driver=genericDriver
+
+# server path for emacspeak
+serverPath=/home/chrys/Projekte/emacspeak/servers/espeak
+
+# The rate selects how fast Fenrir will speak. Options range from 0, slowest, to 1.0, fastest.
+rate=0.65
+
+# Pitch controls the pitch of the voice, select from 0, lowest, to 1.0, highest.
+pitch=0.5
+# Pitch for capital letters
+capitalPitch=0.9
+
+# Volume controls the loudness of the voice, select from 0, quietest, to 1.0, loudest.
+volume=1.0
+
+# Module is used for Speech-dispatcher, to select the speech module you want to use.
+# Consult Speech-dispatcher's configuration and help Fenrir find out which modules are available.
+# The default is espeak.
+#module=espeak
+
+# Voice selects the varient you want to use, for example, f5 will use the female voice #5 in Espeak,
+# or if using the Espeak module in Speech-dispatcher. To find out which voices are available, consult the documentation provided with your selected synthesizer.
+# This also sets the voice used in the generic driver.
+voice=en-us
+
+# Select the language you want Fenrir to use.
+#language=english-us
+
+# Read new text as it happens?
+autoReadIncoming=True
+
+# genericSpeechCommand is the command that is executed for talking
+# the following variables are replaced with values 
+# fenrirText = is the text that should be spoken
+# fenrirModule = may be the speech module like used in speech-dispatcher, not every TTY need this
+# fenrirLanguage = the language 
+# fenrirVoice = is the current voice that should be used. Set the voice variable above.
+# the current volume, pitch and rate is calculated like this
+# value = min + settingValue * (min - max )
+# fenrirVolume = is replaced with the current volume
+# fenrirPitch = is replaced with the current pitch
+# fenrirRate = is replaced with the current speed (speech rate)
+genericSpeechCommand=espeak -a fenrirVolume -s fenrirRate -p fenrirPitch -v fenrirVoice -- "fenrirText"
+
+# those are the min and max values of the TTS system that is used in genericSpeechCommand
+fenrirMinVolume=0
+fenrirMaxVolume=200
+fenrirMinPitch=0
+fenrirMaxPitch=99
+fenrirMinRate=80
+fenrirMaxRate=450
+
+[braille]
+enabled=False
+driver=dummyDriver
+layout=en
+# to what should the flush timeout relate to 
+# word = flush after (number of words to display) * seconds
+# char = flush after (number of chars to display) * seconds
+# fix = flush after X seconds
+# none = no automatic flush (manual via shortcut)
+flushMode=word
+# seconds to flush or
+# -1 = no automatic flush (manual via shortcut)
+flushTimeout=3
+# how should the cursor be focused?
+# page = if cursor cross the border move to next page and start at beginn
+# fixCell = ajust the cursor on an special cell where it is always placed. the display scroll here more smooth.
+cursorFocusMode=page
+# define the cell on the Braille device where fenrir should scroll and keep the cursor
+# 0 = first cell on device
+# -1 = last cell on device 
+# >0 = fix cell number
+fixCursorOnCell=-1
+#How should the braille follow the focus
+# none = no automatic toggle command used
+# review = priority to review
+# last = follow last used cursor
+cursorFollowMode=review
+# number of cells in panning (horizontal)
+# 0 = display size, >0 number of cells
+panSizeHorizontal=0
+
+[screen]
+driver=vcsaDriver
+encoding=auto
+screenUpdateDelay=0.05
+suspendingScreen=
+autodetectSuspendingScreen=True
+
+[keyboard]
+driver=evdevDriver
+# filter input devices NOMICE, ALL or a DEVICE NAME
+device=ALL
+# gives Fenrir exclusive access to the keyboard and lets it control keystrokes.
+grabDevices=True
+ignoreShortcuts=False
+# the current shortcut layout located in /etc/fenrirscreenreader/keyboard
+keyboardLayout=desktop
+# echo chars while typing.
+charEcho=False
+# echo deleted chars
+charDeleteEcho=True
+# echo word after pressing space
+wordEcho=False
+# interrupt speech on any keypress
+interruptOnKeyPress=False
+# you can filter the keys on that the speech should interrupt (empty = all keys, otherwhise the given keys)
+interruptOnKeyPressFilter=
+# timeout for double tap in sec
+doubleTapTimeout=0.2
+
+[general]
+debugLevel=0
+# debugMode sets where the debug output should send to:
+# debugMode=File writes to debugFile (Default: /var/log/fenrirscreenreader/fenrir.log)
+# debugMode=Print just prints on the screen
+debugMode=File
+debugFile=/var/log/fenrirscreenreader/fenrir.log
+punctuationProfile=default
+punctuationLevel=some
+respectPunctuationPause=True
+newLinePause=True
+numberOfClipboards=10
+# used path for "export_clipboard_to_file"
+# $user is replaced by username
+#clipboardExportPath=/home/$user/fenrirClipboard
+clipboardExportPath=/tmp/fenrirClipboard
+emoticons=True
+# define the current Fenrir key
+fenrirKeys=KEY_KP0,KEY_META,KEY_INSERT
+scriptKey=KEY_COMPOSE
+timeFormat=%H:%M:%P
+dateFormat=%A, %B %d, %Y
+autoSpellCheck=True
+spellCheckLanguage=en_US
+# path for your scripts "scriptKey" functionality
+scriptPath=/usr/share/fenrirscreenreader/scripts
+# overload commands, and create new one without changing Fenrir default
+commandPath=
+#fenrirBGColor = the backgroundcolor
+#fenrirFGColor = the foregroundcolor
+#fenrirUnderline = speak the underline attribute
+#fenrirBold = speak the bold attribute
+#fenrirBlink = speak the blink attribute
+#fenrirFont = the font
+#fenrirFontSize = the fontsize
+attributeFormatString=Background fenrirBGColor,Foreground fenrirFGColor,fenrirUnderline,fenrirBold,fenrirBlink, Font fenrirFont,Fontsize fenrirFontSize
+autoPresentIndent=False
+# play a sound when attributes are changeing
+hasAttributes=True
+# shell for PTY emulatiun (empty = default shell)
+shell=
+
+[focus]
+#follow the text cursor
+cursor=True
+#follow highlighted text changes
+highlight=False
+
+[remote]
+enable=True
+# connection type
+# unix = unix sockets
+# tcp = tcp (localhost only)
+method=unix
+# tcp port
+port=22447
+# socket filepath
+socketpath=/tmp/
+# allow settings to overwrite
+enableSettingsRemote=True
+# allow commands to be executed
+enableCommandRemote=True
+
+[barrier]
+enabled=True
+leftBarriers=│└┌─
+rightBarriers=│┘┐─
+
+[review]
+lineBreak=True
+endOfScreen=True
+# leave the review when pressing a key
+leaveReviewOnCursorChange=True
+# leave the review when changing the screen
+leaveReviewOnScreenChange=True
+
+[promote]
+enabled=True
+inactiveTimeoutSec=120
+list=
+
+[time]
+# automatic time anouncement
+enabled=False
+# present time
+presentTime=True
+# present date (on change)
+presentDate=True
+# present time after a given period of seconds
+delaySec=0
+# present time after to given minutes example every 15 minutes: 00,15,30,45
+# if delaySec is >0 onMinutes is ignored
+onMinutes=00,30
+# announce via soundicon (not interrupting)
+announce=True
+# interrupt current speech for time announcement
+interrupt=False

config/settings/settings-pty.conf

@@ -0,0 +1,247 @@
+[sound]
+# Turn sound on or off:
+enabled=True
+
+# Select the driver used to play sounds, choices are genericDriver and gstreamerDriver.
+# Sox is the default.
+#driver=gstreamerDriver
+driver=genericDriver
+
+# Sound themes. These are the pack of sounds used for sound alerts.
+# Sound packs may be located at /usr/share/sounds
+# For system wide availability, or ~/.local/share/fenrirscreenreader/sounds
+# For the current user.
+theme=default
+
+# Sound volume controls how loud the sounds for your selected soundpack are.
+# 0 is quietest, 1.0 is loudest.
+volume=1.0
+
+# shell commands for generic sound driver
+# the folowing variable are substituted
+# fenrirVolume = the current volume setting
+# fenrirSoundFile = the soundfile for an soundicon
+# fenrirFrequence = the frequency to play
+# fenrirDuration = the duration of the frequency
+# the following command is used to play a soundfile
+genericPlayFileCommand=play -q -v fenrirVolume fenrirSoundFile
+#the following command is used to generate a frequency beep
+genericFrequencyCommand=play -q -v fenrirVolume -n -c1 synth fenrirDuration sine fenrirFrequence
+
+[speech]
+# Turn speech on or off:
+enabled=True
+
+# Select speech driver, options are speechdDriver (default), genericDriver or espeakDriver:
+#driver=speechdDriver
+#driver=espeakDriver
+driver=genericDriver
+
+# server path for emacspeak
+serverPath=/home/chrys/Projekte/emacspeak/servers/espeak
+
+# The rate selects how fast Fenrir will speak. Options range from 0, slowest, to 1.0, fastest.
+rate=0.65
+
+# Pitch controls the pitch of the voice, select from 0, lowest, to 1.0, highest.
+pitch=0.5
+# Pitch for capital letters
+capitalPitch=0.9
+
+# Volume controls the loudness of the voice, select from 0, quietest, to 1.0, loudest.
+volume=1.0
+
+# Module is used for Speech-dispatcher, to select the speech module you want to use.
+# Consult Speech-dispatcher's configuration and help Fenrir find out which modules are available.
+# The default is espeak.
+#module=espeak
+
+# Voice selects the varient you want to use, for example, f5 will use the female voice #5 in Espeak,
+# or if using the Espeak module in Speech-dispatcher. To find out which voices are available, consult the documentation provided with your selected synthesizer.
+# This also sets the voice used in the generic driver.
+voice=en-us
+
+# Select the language you want Fenrir to use.
+#language=english-us
+
+# Read new text as it happens?
+autoReadIncoming=True
+
+# genericSpeechCommand is the command that is executed for talking
+# the following variables are replaced with values 
+# fenrirText = is the text that should be spoken
+# fenrirModule = may be the speech module like used in speech-dispatcher, not every TTY need this
+# fenrirLanguage = the language 
+# fenrirVoice = is the current voice that should be used. Set the voice variable above.
+# the current volume, pitch and rate is calculated like this
+# value = min + settingValue * (min - max )
+# fenrirVolume = is replaced with the current volume
+# fenrirPitch = is replaced with the current pitch
+# fenrirRate = is replaced with the current speed (speech rate)
+genericSpeechCommand=espeak -a fenrirVolume -s fenrirRate -p fenrirPitch -v fenrirVoice -- "fenrirText"
+
+# those are the min and max values of the TTS system that is used in genericSpeechCommand
+fenrirMinVolume=0
+fenrirMaxVolume=200
+fenrirMinPitch=0
+fenrirMaxPitch=99
+fenrirMinRate=80
+fenrirMaxRate=450
+
+[braille]
+enabled=False
+driver=dummyDriver
+layout=en
+# to what should the flush timeout relate to 
+# word = flush after (number of words to display) * seconds
+# char = flush after (number of chars to display) * seconds
+# fix = flush after X seconds
+# none = no automatic flush (manual via shortcut)
+flushMode=word
+# seconds to flush or
+# -1 = no automatic flush (manual via shortcut)
+flushTimeout=3
+# how should the cursor be focused?
+# page = if cursor cross the border move to next page and start at beginn
+# fixCell = ajust the cursor on an special cell where it is always placed. the display scroll here more smooth.
+cursorFocusMode=page
+# define the cell on the Braille device where fenrir should scroll and keep the cursor
+# 0 = first cell on device
+# -1 = last cell on device 
+# >0 = fix cell number
+fixCursorOnCell=-1
+#How should the braille follow the focus
+# none = no automatic toggle command used
+# review = priority to review
+# last = follow last used cursor
+cursorFollowMode=review
+# number of cells in panning (horizontal)
+# 0 = display size, >0 number of cells
+panSizeHorizontal=0
+
+[screen]
+driver=vcsaDriver
+encoding=auto
+screenUpdateDelay=0.05
+suspendingScreen=
+autodetectSuspendingScreen=True
+
+[keyboard]
+driver=evdevDriver
+# filter input devices NOMICE, ALL or a DEVICE NAME
+device=ALL
+# gives Fenrir exclusive access to the keyboard and lets it control keystrokes.
+grabDevices=True
+ignoreShortcuts=False
+# the current shortcut layout located in /etc/fenrirscreenreader/keyboard
+keyboardLayout=desktop
+# echo chars while typing.
+charEcho=False
+# echo deleted chars
+charDeleteEcho=True
+# echo word after pressing space
+wordEcho=False
+# interrupt speech on any keypress
+interruptOnKeyPress=False
+# you can filter the keys on that the speech should interrupt (empty = all keys, otherwhise the given keys)
+interruptOnKeyPressFilter=
+# timeout for double tap in sec
+doubleTapTimeout=0.2
+
+[general]
+debugLevel=0
+# debugMode sets where the debug output should send to:
+# debugMode=File writes to debugFile (Default: /var/log/fenrirscreenreader/fenrir.log)
+# debugMode=Print just prints on the screen
+debugMode=File
+debugFile=/var/log/fenrirscreenreader/fenrir.log
+punctuationProfile=default
+punctuationLevel=some
+respectPunctuationPause=True
+newLinePause=True
+numberOfClipboards=10
+# used path for "export_clipboard_to_file"
+# $user is replaced by username
+#clipboardExportPath=/home/$user/fenrirClipboard
+clipboardExportPath=/tmp/fenrirClipboard
+emoticons=True
+# define the current Fenrir key
+fenrirKeys=KEY_KP0,KEY_META,KEY_INSERT
+scriptKey=KEY_COMPOSE
+timeFormat=%H:%M:%P
+dateFormat=%A, %B %d, %Y
+autoSpellCheck=True
+spellCheckLanguage=en_US
+# path for your scripts "scriptKey" functionality
+scriptPath=/usr/share/fenrirscreenreader/scripts
+# overload commands, and create new one without changing Fenrir default
+commandPath=
+#fenrirBGColor = the backgroundcolor
+#fenrirFGColor = the foregroundcolor
+#fenrirUnderline = speak the underline attribute
+#fenrirBold = speak the bold attribute
+#fenrirBlink = speak the blink attribute
+#fenrirFont = the font
+#fenrirFontSize = the fontsize
+attributeFormatString=Background fenrirBGColor,Foreground fenrirFGColor,fenrirUnderline,fenrirBold,fenrirBlink, Font fenrirFont,Fontsize fenrirFontSize
+autoPresentIndent=False
+# play a sound when attributes are changeing
+hasAttributes=True
+# shell for PTY emulatiun (empty = default shell)
+shell=
+
+[focus]
+#follow the text cursor
+cursor=True
+#follow highlighted text changes
+highlight=False
+
+[remote]
+enable=True
+# connection type
+# unix = unix sockets
+# tcp = tcp (localhost only)
+method=unix
+# tcp port
+port=22447
+# socket filepath
+socketpath=/tmp/
+# allow settings to overwrite
+enableSettingsRemote=True
+# allow commands to be executed
+enableCommandRemote=True
+
+[barrier]
+enabled=True
+leftBarriers=│└┌─
+rightBarriers=│┘┐─
+
+[review]
+lineBreak=True
+endOfScreen=True
+# leave the review when pressing a key
+leaveReviewOnCursorChange=True
+# leave the review when changing the screen
+leaveReviewOnScreenChange=True
+
+[promote]
+enabled=True
+inactiveTimeoutSec=120
+list=
+
+[time]
+# automatic time anouncement
+enabled=False
+# present time
+presentTime=True
+# present date (on change)
+presentDate=True
+# present time after a given period of seconds
+delaySec=0
+# present time after to given minutes example every 15 minutes: 00,15,30,45
+# if delaySec is >0 onMinutes is ignored
+onMinutes=00,30
+# announce via soundicon (not interrupting)
+announce=True
+# interrupt current speech for time announcement
+interrupt=False

play zone/detectDevices.py

@@ -1,4 +1,5 @@
 #!/bin/python
+import evdev
 iDevices = {}
 iDeviceNo = 0
 def updateInputDevices(force = False, init = False):
@@ -46,3 +47,4 @@ def updateInputDevices(force = False, init = False):
                 print('Device added:' + iDevices[currDevice.fd].name)
         except Exception as e:
             print("Skip Inputdevice : " + deviceFile +' ' + str(e))                     
+updateInputDevices()            

src/fenrirscreenreader/inputDriver/evdevDriver.py

@@ -45,22 +45,22 @@ class driver(inputDriver):
         self.watchDog = Value(c_bool, True)
     def initialize(self, environment):
         self.env = environment
-        self.env['runtime']['inputManager'].setShortcutType('KEY')        
+        self.env['runtime']['inputManager'].setShortcutType('KEY')
         global _evdevAvailable
-        global _udevAvailable        
+        global _udevAvailable
         self._initialized = _evdevAvailable and _udevAvailable
         if not self._initialized:
             global _evdevAvailableError
-            global _udevAvailableError            
+            global _udevAvailableError
             currError = ' '
             if not _evdevAvailable:
                 currError += _evdevAvailableError
             if not _udevAvailable:
-                currError += ' ' + _udevAvailableError            
+                currError += ' ' + _udevAvailableError
-            self.env['runtime']['debug'].writeDebugOut('InputDriver:' + currError, debug.debugLevel.ERROR)         
+            self.env['runtime']['debug'].writeDebugOut('InputDriver:' + currError, debug.debugLevel.ERROR)
             return  
 
-        self.env['runtime']['processManager'].addCustomEventThread(self.plugInputDeviceWatchdogUdev)        
+        self.env['runtime']['processManager'].addCustomEventThread(self.plugInputDeviceWatchdogUdev)
         self.env['runtime']['processManager'].addCustomEventThread(self.inputWatchdog)
     def plugInputDeviceWatchdogUdev(self,active , eventQueue):
         context = pyudev.Context()
@@ -71,6 +71,7 @@ class driver(inputDriver):
             validDevices = []
             device = monitor.poll(1)
             while device:
+                self.env['runtime']['debug'].writeDebugOut('plugInputDeviceWatchdogUdev:' + str(device), debug.debugLevel.INFO)
                 try:
                     if not '/sys/devices/virtual/input/' in device.sys_path:
                         if device.device_node:
@@ -99,6 +100,7 @@ class driver(inputDriver):
                     except:
                         self.removeDevice(fd)
                     while(event):
+                        self.env['runtime']['debug'].writeDebugOut('inputWatchdog: EVENT:' + str(event), debug.debugLevel.INFO)
                         self.env['input']['eventBuffer'].append( [self.iDevices[fd], self.uDevices[fd], event])
                         if event.type == evdev.events.EV_KEY:
                             if not foundKeyInSequence: