storm/w3m
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

[w3m-dev 04441] error when 'make install'

Browse Source
This commit is contained in:
Ito Hiroyuki
2011-01-04 11:03:20 +00:00
parent 9d934907a3
commit 1c009a2431
8 changed files with 1974 additions and 834 deletions
Download Patch File Download Diff File Expand all files Collapse all files

1579
ABOUT-NLS
View File

File diff suppressed because it is too large Load Diff

11
ChangeLog
View File

@@ -1,3 +1,12 @@
2011-01-04 SAKAI Kiyotaka <kiyotaka.sakai@ntt-at.co.jp>
* [w3m-dev 04441] error when 'make install'
* update followig files. ABOUT-NLS Makefile.in acinclude.m4
aclocal.m4 config.rpath configure configure.ac entity.h install-sh
po/ChangeLog po/Makefile.in.in po/Rules-quot po/boldquot.sed
po/en@boldquot.header po/en@quot.header po/insert-header.sin
po/quot.sed po/remove-potcdate.sin
2010-12-28 Ito Hiroyuki <ZXB01226@nifty.com>
* [w3m-dev 04440] Update documents (README.cookie)
@@ -9269,4 +9278,4 @@ a * [w3m-dev 03276] compile error on EWS4800
* release-0-2-1
* import w3m-0.2.1
$Id: ChangeLog,v 1.1047 2010/12/28 12:28:21 htrb Exp $
$Id: ChangeLog,v 1.1048 2011/01/04 11:03:20 htrb Exp $

284
config.rpath
View File

@@ -2,28 +2,13 @@
# Output a system dependent set of variables, describing how to set the
# run time search path of shared libraries in an executable.
#
# Copyright 1996-2003 Free Software Foundation, Inc.
# Copyright 1996-2010 Free Software Foundation, Inc.
# Taken from GNU libtool, 2001
# Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
# General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
#
# As a special exception to the GNU General Public License, if you
# distribute this file as part of a program that contains a
# configuration script generated by Autoconf, you may include it under
# the same distribution terms that you use for the rest of that program.
# This file is free software; the Free Software Foundation gives
# unlimited permission to copy and/or distribute it, with or without
# modifications, as long as this notice is preserved.
#
# The first argument passed to this file is the canonical host specification,
# CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM
@@ -40,7 +25,7 @@
# known workaround is to choose shorter directory names for the build
# directory and/or the installation directory.
# All known linkers require a `.a' archive for static linking (except M$VC,
# All known linkers require a `.a' archive for static linking (except MSVC,
# which needs '.lib').
libext=a
shrext=.so
@@ -50,7 +35,19 @@ host_cpu=`echo "$host" | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
host_vendor=`echo "$host" | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
host_os=`echo "$host" | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
# Code taken from libtool.m4's AC_LIBTOOL_PROG_COMPILER_PIC.
# Code taken from libtool.m4's _LT_CC_BASENAME.
for cc_temp in $CC""; do
case $cc_temp in
compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
\-*) ;;
*) break;;
esac
done
cc_basename=`echo "$cc_temp" | sed -e 's%^.*/%%'`
# Code taken from libtool.m4's _LT_COMPILER_PIC.
wl=
if test "$GCC" = yes; then
@@ -60,7 +57,14 @@ else
aix*)
wl='-Wl,'
;;
mingw* | pw32* | os2*)
darwin*)
case $cc_basename in
xlc*)
wl='-Wl,'
;;
esac
;;
mingw* | cygwin* | pw32* | os2* | cegcc*)
;;
hpux9* | hpux10* | hpux11*)
wl='-Wl,'
@@ -70,20 +74,39 @@ else
;;
newsos6)
;;
linux*)
case $CC in
icc|ecc)
linux* | k*bsd*-gnu)
case $cc_basename in
ecc*)
wl='-Wl,'
;;
ccc)
icc* | ifort*)
wl='-Wl,'
;;
lf95*)
wl='-Wl,'
;;
pgcc | pgf77 | pgf90)
wl='-Wl,'
;;
ccc*)
wl='-Wl,'
;;
como)
wl='-lopt='
;;
*)
case `$CC -V 2>&1 | sed 5q` in
*Sun\ C*)
wl='-Wl,'
;;
esac
;;
esac
;;
osf3* | osf4* | osf5*)
wl='-Wl,'
;;
sco3.2v5*)
rdos*)
;;
solaris*)
wl='-Wl,'
@@ -91,17 +114,23 @@ else
sunos4*)
wl='-Qoption ld '
;;
sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
sysv4 | sysv4.2uw2* | sysv4.3*)
wl='-Wl,'
;;
sysv4*MP*)
;;
sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
wl='-Wl,'
;;
unicos*)
wl='-Wl,'
;;
uts4*)
;;
esac
fi
# Code taken from libtool.m4's AC_LIBTOOL_PROG_LD_SHLIBS.
# Code taken from libtool.m4's _LT_LINKER_SHLIBS.
hardcode_libdir_flag_spec=
hardcode_libdir_separator=
@@ -109,7 +138,7 @@ hardcode_direct=no
hardcode_minus_L=no
case "$host_os" in
cygwin* | mingw* | pw32*)
cygwin* | mingw* | pw32* | cegcc*)
# FIXME: the MSVC++ port hasn't been tested in a loooong time
# When not using gcc, we currently assume that we are using
# Microsoft Visual C++.
@@ -117,6 +146,10 @@ case "$host_os" in
with_gnu_ld=no
fi
;;
interix*)
# we just hope/assume this is gcc and not c89 (= MSVC++)
with_gnu_ld=yes
;;
openbsd*)
with_gnu_ld=no
;;
@@ -124,8 +157,14 @@ esac
ld_shlibs=yes
if test "$with_gnu_ld" = yes; then
# Set some defaults for GNU ld with shared library support. These
# are reset later if shared libraries are not supported. Putting them
# here allows them to be overridden if necessary.
# Unlike libtool, we use -rpath here, not --rpath, since the documented
# option of GNU ld is called -rpath, not --rpath.
hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
case "$host_os" in
aix3* | aix4* | aix5*)
aix[3-9]*)
# On AIX/PPC, the GNU linker is very broken
if test "$host_cpu" != ia64; then
ld_shlibs=no
@@ -138,18 +177,18 @@ if test "$with_gnu_ld" = yes; then
# that the semantics of dynamic libraries on AmigaOS, at least up
# to version 4, is to share data among multiple programs linked
# with the same dynamic library. Since this doesn't match the
# behavior of shared libraries on other platforms, we can use
# behavior of shared libraries on other platforms, we cannot use
# them.
ld_shlibs=no
;;
beos*)
if $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then
if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
:
else
ld_shlibs=no
fi
;;
cygwin* | mingw* | pw32*)
cygwin* | mingw* | pw32* | cegcc*)
# hardcode_libdir_flag_spec is actually meaningless, as there is
# no search path for DLLs.
hardcode_libdir_flag_spec='-L$libdir'
@@ -159,32 +198,55 @@ if test "$with_gnu_ld" = yes; then
ld_shlibs=no
fi
;;
netbsd*)
interix[3-9]*)
hardcode_direct=no
hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
;;
solaris* | sysv5*)
if $LD -v 2>&1 | egrep 'BFD 2\.8' > /dev/null; then
ld_shlibs=no
elif $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then
gnu* | linux* | k*bsd*-gnu)
if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
:
else
ld_shlibs=no
fi
;;
netbsd*)
;;
solaris*)
if $LD -v 2>&1 | grep 'BFD 2\.8' > /dev/null; then
ld_shlibs=no
elif $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
:
else
ld_shlibs=no
fi
;;
sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*)
case `$LD -v 2>&1` in
*\ [01].* | *\ 2.[0-9].* | *\ 2.1[0-5].*)
ld_shlibs=no
;;
*)
if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
hardcode_libdir_flag_spec='`test -z "$SCOABSPATH" && echo ${wl}-rpath,$libdir`'
else
ld_shlibs=no
fi
;;
esac
;;
sunos4*)
hardcode_direct=yes
;;
*)
if $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then
if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
:
else
ld_shlibs=no
fi
;;
esac
if test "$ld_shlibs" = yes; then
# Unlike libtool, we use -rpath here, not --rpath, since the documented
# option of GNU ld is called -rpath, not --rpath.
hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
if test "$ld_shlibs" = no; then
hardcode_libdir_flag_spec=
fi
else
case "$host_os" in
@@ -198,7 +260,7 @@ else
hardcode_direct=unsupported
fi
;;
aix4* | aix5*)
aix[4-9]*)
if test "$host_cpu" = ia64; then
# On IA64, the linker does run time linking by default, so we don't
# have to do anything special.
@@ -208,13 +270,14 @@ else
# Test if we are trying to use run time linking or normal
# AIX style linking. If -brtl is somewhere in LDFLAGS, we
# need to do runtime linking.
case $host_os in aix4.[23]|aix4.[23].*|aix5*)
case $host_os in aix4.[23]|aix4.[23].*|aix[5-9]*)
for ld_flag in $LDFLAGS; do
if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then
aix_use_runtimelinking=yes
break
fi
done
;;
esac
fi
hardcode_direct=yes
@@ -226,7 +289,7 @@ else
strings "$collect2name" | grep resolve_lib_name >/dev/null
then
# We have reworked collect2
hardcode_direct=yes
:
else
# We have old collect2
hardcode_direct=unsupported
@@ -234,6 +297,7 @@ else
hardcode_libdir_flag_spec='-L$libdir'
hardcode_libdir_separator=
fi
;;
esac
fi
# Begin _LT_AC_SYS_LIBPATH_AIX.
@@ -266,9 +330,9 @@ else
# see comment about different semantics on the GNU ld section
ld_shlibs=no
;;
bsdi4*)
bsdi[45]*)
;;
cygwin* | mingw* | pw32*)
cygwin* | mingw* | pw32* | cegcc*)
# When not using gcc, we currently assume that we are using
# Microsoft Visual C++.
# hardcode_libdir_flag_spec is actually meaningless, as there is
@@ -277,8 +341,17 @@ else
libext=lib
;;
darwin* | rhapsody*)
if $CC -v 2>&1 | grep 'Apple' >/dev/null ; then
hardcode_direct=no
if test "$GCC" = yes ; then
:
else
case $cc_basename in
xlc*)
;;
*)
ld_shlibs=no
;;
esac
fi
;;
dgux*)
@@ -295,7 +368,7 @@ else
hardcode_direct=yes
hardcode_minus_L=yes
;;
freebsd*)
freebsd* | dragonfly*)
hardcode_libdir_flag_spec='-R$libdir'
hardcode_direct=yes
;;
@@ -307,24 +380,25 @@ else
# but as the default location of the library.
hardcode_minus_L=yes
;;
hpux10* | hpux11*)
hpux10*)
if test "$with_gnu_ld" = no; then
case "$host_cpu" in
hppa*64*)
hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
hardcode_libdir_separator=:
hardcode_direct=no
;;
ia64*)
hardcode_libdir_flag_spec='-L$libdir'
hardcode_direct=no
hardcode_direct=yes
# hardcode_minus_L: Not really in the search PATH,
# but as the default location of the library.
hardcode_minus_L=yes
fi
;;
*)
hpux11*)
if test "$with_gnu_ld" = no; then
hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
hardcode_libdir_separator=:
case $host_cpu in
hppa*64*|ia64*)
hardcode_direct=no
;;
*)
hardcode_direct=yes
# hardcode_minus_L: Not really in the search PATH,
# but as the default location of the library.
@@ -347,6 +421,7 @@ else
hardcode_libdir_separator=:
;;
openbsd*)
if test -f /usr/libexec/ld.so; then
hardcode_direct=yes
if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
@@ -360,6 +435,9 @@ else
;;
esac
fi
else
ld_shlibs=no
fi
;;
os2*)
hardcode_libdir_flag_spec='-L$libdir'
@@ -378,8 +456,6 @@ else
fi
hardcode_libdir_separator=:
;;
sco3.2v5*)
;;
solaris*)
hardcode_libdir_flag_spec='-R$libdir'
;;
@@ -408,14 +484,11 @@ else
ld_shlibs=yes
fi
;;
sysv4.2uw2*)
hardcode_direct=yes
hardcode_minus_L=no
sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7* | sco3.2v5.0.[024]*)
;;
sysv5OpenUNIX8* | sysv5UnixWare7* | sysv5uw[78]* | unixware7*)
;;
sysv5*)
hardcode_libdir_flag_spec=
sysv5* | sco3.2v5* | sco5v6*)
hardcode_libdir_flag_spec='`test -z "$SCOABSPATH" && echo ${wl}-R,$libdir`'
hardcode_libdir_separator=':'
;;
uts4*)
hardcode_libdir_flag_spec='-L$libdir'
@@ -427,35 +500,55 @@ else
fi
# Check dynamic linker characteristics
# Code taken from libtool.m4's AC_LIBTOOL_SYS_DYNAMIC_LINKER.
# Code taken from libtool.m4's _LT_SYS_DYNAMIC_LINKER.
# Unlike libtool.m4, here we don't care about _all_ names of the library, but
# only about the one the linker finds when passed -lNAME. This is the last
# element of library_names_spec in libtool.m4, or possibly two of them if the
# linker has special search rules.
library_names_spec= # the last element of library_names_spec in libtool.m4
libname_spec='lib$name'
case "$host_os" in
aix3*)
library_names_spec='$libname.a'
;;
aix4* | aix5*)
aix[4-9]*)
library_names_spec='$libname$shrext'
;;
amigaos*)
library_names_spec='$libname.a'
;;
beos*)
library_names_spec='$libname$shrext'
;;
bsdi4*)
bsdi[45]*)
library_names_spec='$libname$shrext'
;;
cygwin* | mingw* | pw32*)
cygwin* | mingw* | pw32* | cegcc*)
shrext=.dll
library_names_spec='$libname.dll.a $libname.lib'
;;
darwin* | rhapsody*)
shrext=.dylib
library_names_spec='$libname$shrext'
;;
dgux*)
library_names_spec='$libname$shrext'
;;
freebsd1*)
;;
freebsd*)
freebsd* | dragonfly*)
case "$host_os" in
freebsd[123]*)
library_names_spec='$libname$shrext$versuffix' ;;
*)
library_names_spec='$libname$shrext' ;;
esac
;;
gnu*)
library_names_spec='$libname$shrext'
;;
hpux9* | hpux10* | hpux11*)
case "$host_cpu" in
case $host_cpu in
ia64*)
shrext=.so
;;
@@ -466,8 +559,13 @@ case "$host_os" in
shrext=.sl
;;
esac
library_names_spec='$libname$shrext'
;;
interix[3-9]*)
library_names_spec='$libname$shrext'
;;
irix5* | irix6* | nonstopux*)
library_names_spec='$libname$shrext'
case "$host_os" in
irix5* | nonstopux*)
libsuff= shlibsuff=
@@ -484,42 +582,62 @@ case "$host_os" in
;;
linux*oldld* | linux*aout* | linux*coff*)
;;
linux*)
linux* | k*bsd*-gnu)
library_names_spec='$libname$shrext'
;;
knetbsd*-gnu)
library_names_spec='$libname$shrext'
;;
netbsd*)
library_names_spec='$libname$shrext'
;;
newsos6)
library_names_spec='$libname$shrext'
;;
nto-qnx)
nto-qnx*)
library_names_spec='$libname$shrext'
;;
openbsd*)
library_names_spec='$libname$shrext$versuffix'
;;
os2*)
libname_spec='$name'
shrext=.dll
library_names_spec='$libname.a'
;;
osf3* | osf4* | osf5*)
library_names_spec='$libname$shrext'
;;
sco3.2v5*)
rdos*)
;;
solaris*)
library_names_spec='$libname$shrext'
;;
sunos4*)
library_names_spec='$libname$shrext$versuffix'
;;
sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
sysv4 | sysv4.3*)
library_names_spec='$libname$shrext'
;;
sysv4*MP*)
library_names_spec='$libname$shrext'
;;
sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
library_names_spec='$libname$shrext'
;;
uts4*)
library_names_spec='$libname$shrext'
;;
esac
sed_quote_subst='s/\(["`$\\]\)/\\\1/g'
escaped_wl=`echo "X$wl" | sed -e 's/^X//' -e "$sed_quote_subst"`
shlibext=`echo "$shrext" | sed -e 's,^\.,,'`
escaped_libname_spec=`echo "X$libname_spec" | sed -e 's/^X//' -e "$sed_quote_subst"`
escaped_library_names_spec=`echo "X$library_names_spec" | sed -e 's/^X//' -e "$sed_quote_subst"`
escaped_hardcode_libdir_flag_spec=`echo "X$hardcode_libdir_flag_spec" | sed -e 's/^X//' -e "$sed_quote_subst"`
sed -e 's/^\([a-zA-Z0-9_]*\)=/acl_cv_\1=/' <<EOF
LC_ALL=C sed -e 's/^\([a-zA-Z0-9_]*\)=/acl_cv_\1=/' <<EOF
# How to pass a linker flag through the compiler.
wl="$escaped_wl"
@@ -530,6 +648,12 @@ libext="$libext"
# Shared library suffix (normally "so").
shlibext="$shlibext"
# Format of library name prefix.
libname_spec="$escaped_libname_spec"
# Library names that the linker finds when passed -lNAME.
library_names_spec="$escaped_library_names_spec"
# Flag to hardcode \$libdir into a binary during linking.
# This must work even if \$libdir does not exist.
hardcode_libdir_flag_spec="$escaped_hardcode_libdir_flag_spec"

2
entity.h
View File

@@ -1,4 +1,4 @@
/* $Id: entity.h,v 1.5 2010/12/21 10:13:55 htrb Exp $ */
/* $Id: entity.h,v 1.6 2011/01/04 11:03:20 htrb Exp $ */
#include "hash.h"
static HashItem_si MyHashItem[] = {
/* 0 */ {"otimes", 0x2297, &MyHashItem[1]},

610
install-sh
View File

@@ -1,7 +1,8 @@
#!/bin/sh
#
# install - install a program, script, or datafile
#
scriptversion=2006-12-25.00
# This originates from X11R5 (mit/util/scripts/install.sh), which was
# later released in X11R6 (xc/config/util/install.sh) with the
# following copyright and license.
@@ -38,232 +39,481 @@
# when there is no Makefile.
#
# This script is compatible with the BSD install script, but was written
# from scratch. It can only install one file at a time, a restriction
# shared with many OS's install programs.
# from scratch.
nl='
'
IFS=" "" $nl"
# set DOITPROG to echo to test this script
# Don't use :- since 4.3BSD and earlier shells don't like it.
doit="${DOITPROG-}"
doit=${DOITPROG-}
if test -z "$doit"; then
doit_exec=exec
else
doit_exec=$doit
fi
# Put in absolute file names if you don't have them in your path;
# or use environment vars.
# put in absolute paths if you don't have them in your path; or use env. vars.
chgrpprog=${CHGRPPROG-chgrp}
chmodprog=${CHMODPROG-chmod}
chownprog=${CHOWNPROG-chown}
cmpprog=${CMPPROG-cmp}
cpprog=${CPPROG-cp}
mkdirprog=${MKDIRPROG-mkdir}
mvprog=${MVPROG-mv}
rmprog=${RMPROG-rm}
stripprog=${STRIPPROG-strip}
mvprog="${MVPROG-mv}"
cpprog="${CPPROG-cp}"
chmodprog="${CHMODPROG-chmod}"
chownprog="${CHOWNPROG-chown}"
chgrpprog="${CHGRPPROG-chgrp}"
stripprog="${STRIPPROG-strip}"
rmprog="${RMPROG-rm}"
mkdirprog="${MKDIRPROG-mkdir}"
posix_glob='?'
initialize_posix_glob='
test "$posix_glob" != "?" || {
if (set -f) 2>/dev/null; then
posix_glob=
else
posix_glob=:
fi
}
'
transformbasename=""
transform_arg=""
instcmd="$mvprog"
chmodcmd="$chmodprog 0755"
chowncmd=""
chgrpcmd=""
stripcmd=""
posix_mkdir=
# Desired mode of installed file.
mode=0755
chgrpcmd=
chmodcmd=$chmodprog
chowncmd=
mvcmd=$mvprog
rmcmd="$rmprog -f"
mvcmd="$mvprog"
src=""
dst=""
dir_arg=""
stripcmd=
while [ x"$1" != x ]; do
src=
dst=
dir_arg=
dst_arg=
copy_on_change=false
no_target_directory=
usage="\
Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE
or: $0 [OPTION]... SRCFILES... DIRECTORY
or: $0 [OPTION]... -t DIRECTORY SRCFILES...
or: $0 [OPTION]... -d DIRECTORIES...
In the 1st form, copy SRCFILE to DSTFILE.
In the 2nd and 3rd, copy all SRCFILES to DIRECTORY.
In the 4th, create DIRECTORIES.
Options:
--help display this help and exit.
--version display version info and exit.
-c (ignored)
-C install only if different (preserve the last data modification time)
-d create directories instead of installing files.
-g GROUP $chgrpprog installed files to GROUP.
-m MODE $chmodprog installed files to MODE.
-o USER $chownprog installed files to USER.
-s $stripprog installed files.
-t DIRECTORY install into DIRECTORY.
-T report an error if DSTFILE is a directory.
Environment variables override the default commands:
CHGRPPROG CHMODPROG CHOWNPROG CMPPROG CPPROG MKDIRPROG MVPROG
RMPROG STRIPPROG
"
while test $# -ne 0; do
case $1 in
-c) instcmd="$cpprog"
shift
continue;;
-c) ;;
-d) dir_arg=true
shift
continue;;
-C) copy_on_change=true;;
-m) chmodcmd="$chmodprog $2"
shift
shift
continue;;
-o) chowncmd="$chownprog $2"
shift
shift
continue;;
-d) dir_arg=true;;
-g) chgrpcmd="$chgrpprog $2"
shift
shift
continue;;
shift;;
-s) stripcmd="$stripprog"
shift
continue;;
--help) echo "$usage"; exit $?;;
-t=*) transformarg=`echo $1 | sed 's/-t=//'`
shift
continue;;
-b=*) transformbasename=`echo $1 | sed 's/-b=//'`
shift
continue;;
*) if [ x"$src" = x ]
then
src=$1
else
# this colon is to work around a 386BSD /bin/sh bug
:
dst=$1
fi
shift
continue;;
-m) mode=$2
case $mode in
*' '* | *' '* | *'
'* | *'*'* | *'?'* | *'['*)
echo "$0: invalid mode: $mode" >&2
exit 1;;
esac
done
shift;;
if [ x"$src" = x ]
then
echo "install: no input file specified"
exit 1
else
true
fi
-o) chowncmd="$chownprog $2"
shift;;
if [ x"$dir_arg" != x ]; then
dst=$src
src=""
-s) stripcmd=$stripprog;;
if [ -d $dst ]; then
instcmd=:
chmodcmd=""
else
instcmd=mkdir
fi
else
-t) dst_arg=$2
shift;;
# Waiting for this to be detected by the "$instcmd $src $dsttmp" command
# might cause directories to be created, which would be especially bad
# if $src (and thus $dsttmp) contains '*'.
-T) no_target_directory=true;;
if [ -f $src -o -d $src ]
then
true
else
echo "install: $src does not exist"
exit 1
fi
--version) echo "$0 $scriptversion"; exit $?;;
if [ x"$dst" = x ]
then
echo "install: no destination specified"
exit 1
else
true
fi
--) shift
break;;
# If destination is a directory, append the input filename; if your system
# does not like double slashes in filenames, you may need to add some logic
-*) echo "$0: invalid option: $1" >&2
exit 1;;
if [ -d $dst ]
then
dst="$dst"/`basename $src`
else
true
fi
fi
## this sed command emulates the dirname command
dstdir=`echo $dst | sed -e 's,[^/]*$,,;s,/$,,;s,^$,.,'`
# Make sure that the destination directory exists.
# this part is taken from Noah Friedman's mkinstalldirs script
# Skip lots of stat calls in the usual case.
if [ ! -d "$dstdir" ]; then
defaultIFS='
'
IFS="${IFS-${defaultIFS}}"
oIFS="${IFS}"
# Some sh's can't handle IFS=/ for some reason.
IFS='%'
set - `echo ${dstdir} | sed -e 's@/@%@g' -e 's@^%@/@'`
IFS="${oIFS}"
pathcomp=''
while [ $# -ne 0 ] ; do
pathcomp="${pathcomp}${1}"
*) break;;
esac
shift
if [ ! -d "${pathcomp}" ] ;
then
$mkdirprog "${pathcomp}"
else
true
fi
pathcomp="${pathcomp}/"
done
if test $# -ne 0 && test -z "$dir_arg$dst_arg"; then
# When -d is used, all remaining arguments are directories to create.
# When -t is used, the destination is already specified.
# Otherwise, the last argument is the destination. Remove it from $@.
for arg
do
if test -n "$dst_arg"; then
# $@ is not empty: it contains at least $arg.
set fnord "$@" "$dst_arg"
shift # fnord
fi
shift # arg
dst_arg=$arg
done
fi
if [ x"$dir_arg" != x ]
then
$doit $instcmd $dst &&
if test $# -eq 0; then
if test -z "$dir_arg"; then
echo "$0: no input file specified." >&2
exit 1
fi
# It's OK to call `install-sh -d' without argument.
# This can happen when creating conditional directories.
exit 0
fi
if [ x"$chowncmd" != x ]; then $doit $chowncmd $dst; else true ; fi &&
if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dst; else true ; fi &&
if [ x"$stripcmd" != x ]; then $doit $stripcmd $dst; else true ; fi &&
if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dst; else true ; fi
else
if test -z "$dir_arg"; then
trap '(exit $?); exit' 1 2 13 15
# If we're going to rename the final executable, determine the name now.
# Set umask so as not to create temps with too-generous modes.
# However, 'strip' requires both read and write access to temps.
case $mode in
# Optimize common cases.
*644) cp_umask=133;;
*755) cp_umask=22;;
if [ x"$transformarg" = x ]
then
dstfile=`basename $dst`
*[0-7])
if test -z "$stripcmd"; then
u_plus_rw=
else
dstfile=`basename $dst $transformbasename |
sed $transformarg`$transformbasename
u_plus_rw='% 200'
fi
cp_umask=`expr '(' 777 - $mode % 1000 ')' $u_plus_rw`;;
*)
if test -z "$stripcmd"; then
u_plus_rw=
else
u_plus_rw=,u+rw
fi
cp_umask=$mode$u_plus_rw;;
esac
fi
for src
do
# Protect names starting with `-'.
case $src in
-*) src=./$src;;
esac
if test -n "$dir_arg"; then
dst=$src
dstdir=$dst
test -d "$dstdir"
dstdir_status=$?
else
# Waiting for this to be detected by the "$cpprog $src $dsttmp" command
# might cause directories to be created, which would be especially bad
# if $src (and thus $dsttmp) contains '*'.
if test ! -f "$src" && test ! -d "$src"; then
echo "$0: $src does not exist." >&2
exit 1
fi
# don't allow the sed command to completely eliminate the filename
if [ x"$dstfile" = x ]
then
dstfile=`basename $dst`
else
true
if test -z "$dst_arg"; then
echo "$0: no destination specified." >&2
exit 1
fi
# Make a temp file name in the proper directory.
dst=$dst_arg
# Protect names starting with `-'.
case $dst in
-*) dst=./$dst;;
esac
dsttmp=$dstdir/#inst.$$#
# If destination is a directory, append the input filename; won't work
# if double slashes aren't ignored.
if test -d "$dst"; then
if test -n "$no_target_directory"; then
echo "$0: $dst_arg: Is a directory" >&2
exit 1
fi
dstdir=$dst
dst=$dstdir/`basename "$src"`
dstdir_status=0
else
# Prefer dirname, but fall back on a substitute if dirname fails.
dstdir=`
(dirname "$dst") 2>/dev/null ||
expr X"$dst" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
X"$dst" : 'X\(//\)[^/]' \| \
X"$dst" : 'X\(//\)$' \| \
X"$dst" : 'X\(/\)' \| . 2>/dev/null ||
echo X"$dst" |
sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
s//\1/
q
}
/^X\(\/\/\)[^/].*/{
s//\1/
q
}
/^X\(\/\/\)$/{
s//\1/
q
}
/^X\(\/\).*/{
s//\1/
q
}
s/.*/./; q'
`
# Move or copy the file name to the temp name
test -d "$dstdir"
dstdir_status=$?
fi
fi
$doit $instcmd $src $dsttmp &&
obsolete_mkdir_used=false
trap "rm -f ${dsttmp}" 0 &&
if test $dstdir_status != 0; then
case $posix_mkdir in
'')
# Create intermediate dirs using mode 755 as modified by the umask.
# This is like FreeBSD 'install' as of 1997-10-28.
umask=`umask`
case $stripcmd.$umask in
# Optimize common cases.
*[2367][2367]) mkdir_umask=$umask;;
.*0[02][02] | .[02][02] | .[02]) mkdir_umask=22;;
# and set any options; do chmod last to preserve setuid bits
*[0-7])
mkdir_umask=`expr $umask + 22 \
- $umask % 100 % 40 + $umask % 20 \
- $umask % 10 % 4 + $umask % 2
`;;
*) mkdir_umask=$umask,go-w;;
esac
# If any of these fail, we abort the whole thing. If we want to
# ignore errors from any of these, just make sure not to ignore
# errors from the above "$doit $instcmd $src $dsttmp" command.
# With -d, create the new directory with the user-specified mode.
# Otherwise, rely on $mkdir_umask.
if test -n "$dir_arg"; then
mkdir_mode=-m$mode
else
mkdir_mode=
fi
if [ x"$chowncmd" != x ]; then $doit $chowncmd $dsttmp; else true;fi &&
if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dsttmp; else true;fi &&
if [ x"$stripcmd" != x ]; then $doit $stripcmd $dsttmp; else true;fi &&
if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dsttmp; else true;fi &&
posix_mkdir=false
case $umask in
*[123567][0-7][0-7])
# POSIX mkdir -p sets u+wx bits regardless of umask, which
# is incompatible with FreeBSD 'install' when (umask & 300) != 0.
;;
*)
tmpdir=${TMPDIR-/tmp}/ins$RANDOM-$$
trap 'ret=$?; rmdir "$tmpdir/d" "$tmpdir" 2>/dev/null; exit $ret' 0
# Now rename the file to the real destination.
if (umask $mkdir_umask &&
exec $mkdirprog $mkdir_mode -p -- "$tmpdir/d") >/dev/null 2>&1
then
if test -z "$dir_arg" || {
# Check for POSIX incompatibilities with -m.
# HP-UX 11.23 and IRIX 6.5 mkdir -m -p sets group- or
# other-writeable bit of parent directory when it shouldn't.
# FreeBSD 6.1 mkdir -m -p sets mode of existing directory.
ls_ld_tmpdir=`ls -ld "$tmpdir"`
case $ls_ld_tmpdir in
d????-?r-*) different_mode=700;;
d????-?--*) different_mode=755;;
*) false;;
esac &&
$mkdirprog -m$different_mode -p -- "$tmpdir" && {
ls_ld_tmpdir_1=`ls -ld "$tmpdir"`
test "$ls_ld_tmpdir" = "$ls_ld_tmpdir_1"
}
}
then posix_mkdir=:
fi
rmdir "$tmpdir/d" "$tmpdir"
else
# Remove any dirs left behind by ancient mkdir implementations.
rmdir ./$mkdir_mode ./-p ./-- 2>/dev/null
fi
trap '' 0;;
esac;;
esac
$doit $rmcmd -f $dstdir/$dstfile &&
$doit $mvcmd $dsttmp $dstdir/$dstfile
if
$posix_mkdir && (
umask $mkdir_umask &&
$doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir"
)
then :
else
fi &&
# The umask is ridiculous, or mkdir does not conform to POSIX,
# or it failed possibly due to a race condition. Create the
# directory the slow way, step by step, checking for races as we go.
case $dstdir in
/*) prefix='/';;
-*) prefix='./';;
*) prefix='';;
esac
exit 0
eval "$initialize_posix_glob"
oIFS=$IFS
IFS=/
$posix_glob set -f
set fnord $dstdir
shift
$posix_glob set +f
IFS=$oIFS
prefixes=
for d
do
test -z "$d" && continue
prefix=$prefix$d
if test -d "$prefix"; then
prefixes=
else
if $posix_mkdir; then
(umask=$mkdir_umask &&
$doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir") && break
# Don't fail if two instances are running concurrently.
test -d "$prefix" || exit 1
else
case $prefix in
*\'*) qprefix=`echo "$prefix" | sed "s/'/'\\\\\\\\''/g"`;;
*) qprefix=$prefix;;
esac
prefixes="$prefixes '$qprefix'"
fi
fi
prefix=$prefix/
done
if test -n "$prefixes"; then
# Don't fail if two instances are running concurrently.
(umask $mkdir_umask &&
eval "\$doit_exec \$mkdirprog $prefixes") ||
test -d "$dstdir" || exit 1
obsolete_mkdir_used=true
fi
fi
fi
if test -n "$dir_arg"; then
{ test -z "$chowncmd" || $doit $chowncmd "$dst"; } &&
{ test -z "$chgrpcmd" || $doit $chgrpcmd "$dst"; } &&
{ test "$obsolete_mkdir_used$chowncmd$chgrpcmd" = false ||
test -z "$chmodcmd" || $doit $chmodcmd $mode "$dst"; } || exit 1
else
# Make a couple of temp file names in the proper directory.
dsttmp=$dstdir/_inst.$$_
rmtmp=$dstdir/_rm.$$_
# Trap to clean up those temp files at exit.
trap 'ret=$?; rm -f "$dsttmp" "$rmtmp" && exit $ret' 0
# Copy the file name to the temp name.
(umask $cp_umask && $doit_exec $cpprog "$src" "$dsttmp") &&
# and set any options; do chmod last to preserve setuid bits.
#
# If any of these fail, we abort the whole thing. If we want to
# ignore errors from any of these, just make sure not to ignore
# errors from the above "$doit $cpprog $src $dsttmp" command.
#
{ test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } &&
{ test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } &&
{ test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } &&
{ test -z "$chmodcmd" || $doit $chmodcmd $mode "$dsttmp"; } &&
# If -C, don't bother to copy if it wouldn't change the file.
if $copy_on_change &&
old=`LC_ALL=C ls -dlL "$dst" 2>/dev/null` &&
new=`LC_ALL=C ls -dlL "$dsttmp" 2>/dev/null` &&
eval "$initialize_posix_glob" &&
$posix_glob set -f &&
set X $old && old=:$2:$4:$5:$6 &&
set X $new && new=:$2:$4:$5:$6 &&
$posix_glob set +f &&
test "$old" = "$new" &&
$cmpprog "$dst" "$dsttmp" >/dev/null 2>&1
then
rm -f "$dsttmp"
else
# Rename the file to the real destination.
$doit $mvcmd -f "$dsttmp" "$dst" 2>/dev/null ||
# The rename failed, perhaps because mv can't rename something else
# to itself, or perhaps because mv is so ancient that it does not
# support -f.
{
# Now remove or move aside any old file at destination location.
# We try this two ways since rm can't unlink itself on some
# systems and the destination file might be busy for other
# reasons. In this case, the final cleanup might fail but the new
# file should still install successfully.
{
test ! -f "$dst" ||
$doit $rmcmd -f "$dst" 2>/dev/null ||
{ $doit $mvcmd -f "$dst" "$rmtmp" 2>/dev/null &&
{ $doit $rmcmd -f "$rmtmp" 2>/dev/null; :; }
} ||
{ echo "$0: cannot unlink or rename $dst" >&2
(exit 1); exit 1
}
} &&
# Now rename the file to the real destination.
$doit $mvcmd "$dsttmp" "$dst"
}
fi || exit 1
trap '' 0
fi
done
# Local variables:
# eval: (add-hook 'write-file-hooks 'time-stamp)
# time-stamp-start: "scriptversion="
# time-stamp-format: "%:y-%02m-%02d.%02H"
# time-stamp-end: "$"
# End:

5
po/ChangeLog
View File

@@ -1,3 +1,8 @@
2011-01-04 gettextize <bug-gnu-gettext@gnu.org>
* Makefile.in.in: Upgrade to gettext-0.18.1.
* Rules-quot: Upgrade to gettext-0.18.1.
2003-09-24 gettextize <bug-gnu-gettext@gnu.org>
* Makefile.in.in: New file, from gettext-0.12.1.

158
po/Makefile.in.in
View File

@@ -1,5 +1,5 @@
# Makefile for PO directory in any package using GNU gettext.
# Copyright (C) 1995-1997, 2000-2003 by Ulrich Drepper <drepper@gnu.ai.mit.edu>
# Copyright (C) 1995-1997, 2000-2007, 2009-2010 by Ulrich Drepper <drepper@gnu.ai.mit.edu>
#
# This file can be copied and used freely without restrictions. It can
# be used in projects which are not available under the GNU General Public
@@ -7,9 +7,13 @@
# functionality.
# Please note that the actual code of GNU gettext is covered by the GNU
# General Public License and is *not* in the public domain.
#
# Origin: gettext-0.18
GETTEXT_MACRO_VERSION = 0.18
PACKAGE = @PACKAGE@
VERSION = @VERSION@
PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
SHELL = /bin/sh
@SET_MAKE@
@@ -22,17 +26,36 @@ prefix = @prefix@
exec_prefix = @exec_prefix@
datarootdir = @datarootdir@
datadir = @datadir@
localedir = $(datadir)/locale
localedir = @localedir@
gettextsrcdir = $(datadir)/gettext/po
INSTALL = @INSTALL@
INSTALL_DATA = @INSTALL_DATA@
MKINSTALLDIRS = @MKINSTALLDIRS@
mkinstalldirs = $(SHELL) $(MKINSTALLDIRS)
GMSGFMT = @GMSGFMT@
MSGFMT = @MSGFMT@
XGETTEXT = @XGETTEXT@
# We use $(mkdir_p).
# In automake <= 1.9.x, $(mkdir_p) is defined either as "mkdir -p --" or as
# "$(mkinstalldirs)" or as "$(install_sh) -d". For these automake versions,
# @install_sh@ does not start with $(SHELL), so we add it.
# In automake >= 1.10, @mkdir_p@ is derived from ${MKDIR_P}, which is defined
# either as "/path/to/mkdir -p" or ".../install-sh -c -d". For these automake
# versions, $(mkinstalldirs) and $(install_sh) are unused.
mkinstalldirs = $(SHELL) @install_sh@ -d
install_sh = $(SHELL) @install_sh@
MKDIR_P = @MKDIR_P@
mkdir_p = @mkdir_p@
GMSGFMT_ = @GMSGFMT@
GMSGFMT_no = @GMSGFMT@
GMSGFMT_yes = @GMSGFMT_015@
GMSGFMT = $(GMSGFMT_$(USE_MSGCTXT))
MSGFMT_ = @MSGFMT@
MSGFMT_no = @MSGFMT@
MSGFMT_yes = @MSGFMT_015@
MSGFMT = $(MSGFMT_$(USE_MSGCTXT))
XGETTEXT_ = @XGETTEXT@
XGETTEXT_no = @XGETTEXT@
XGETTEXT_yes = @XGETTEXT_015@
XGETTEXT = $(XGETTEXT_$(USE_MSGCTXT))
MSGMERGE = msgmerge
MSGMERGE_UPDATE = @MSGMERGE@ --update
MSGINIT = msginit
@@ -45,7 +68,7 @@ UPDATEPOFILES = @UPDATEPOFILES@
DUMMYPOFILES = @DUMMYPOFILES@
DISTFILES.common = Makefile.in.in remove-potcdate.sin \
$(DISTFILES.common.extra1) $(DISTFILES.common.extra2) $(DISTFILES.common.extra3)
DISTFILES = $(DISTFILES.common) Makevars POTFILES.in $(DOMAIN).pot stamp-po \
DISTFILES = $(DISTFILES.common) Makevars POTFILES.in \
$(POFILES) $(GMOFILES) \
$(DISTFILES.extra1) $(DISTFILES.extra2) $(DISTFILES.extra3)
@@ -56,7 +79,7 @@ CATALOGS = @CATALOGS@
# Makevars gets inserted here. (Don't remove this line!)
.SUFFIXES:
.SUFFIXES: .po .gmo .mo .sed .sin .nop .po-update
.SUFFIXES: .po .gmo .mo .sed .sin .nop .po-create .po-update
.po.mo:
@echo "$(MSGFMT) -c -o $@ $<"; \
@@ -65,19 +88,32 @@ CATALOGS = @CATALOGS@
.po.gmo:
@lang=`echo $* | sed -e 's,.*/,,'`; \
test "$(srcdir)" = . && cdcmd="" || cdcmd="cd $(srcdir) && "; \
echo "$${cdcmd}rm -f $${lang}.gmo && $(GMSGFMT) -c --statistics -o $${lang}.gmo $${lang}.po"; \
cd $(srcdir) && rm -f $${lang}.gmo && $(GMSGFMT) -c --statistics -o t-$${lang}.gmo $${lang}.po && mv t-$${lang}.gmo $${lang}.gmo
echo "$${cdcmd}rm -f $${lang}.gmo && $(GMSGFMT) -c --statistics --verbose -o $${lang}.gmo $${lang}.po"; \
cd $(srcdir) && rm -f $${lang}.gmo && $(GMSGFMT) -c --statistics --verbose -o t-$${lang}.gmo $${lang}.po && mv t-$${lang}.gmo $${lang}.gmo
.sin.sed:
sed -e '/^#/d' $< > t-$@
mv t-$@ $@
all: all-@USE_NLS@
all: check-macro-version all-@USE_NLS@
all-yes: stamp-po
all-no:
# Ensure that the gettext macros and this Makefile.in.in are in sync.
check-macro-version:
@test "$(GETTEXT_MACRO_VERSION)" = "@GETTEXT_MACRO_VERSION@" \
|| { echo "*** error: gettext infrastructure mismatch: using a Makefile.in.in from gettext version $(GETTEXT_MACRO_VERSION) but the autoconf macros are from gettext version @GETTEXT_MACRO_VERSION@" 1>&2; \
exit 1; \
}
# $(srcdir)/$(DOMAIN).pot is only created when needed. When xgettext finds no
# internationalized messages, no $(srcdir)/$(DOMAIN).pot is created (because
# we don't want to bother translators with empty POT files). We assume that
# LINGUAS is empty in this case, i.e. $(POFILES) and $(GMOFILES) are empty.
# In this case, stamp-po is a nop (i.e. a phony target).
# stamp-po is a timestamp denoting the last time at which the CATALOGS have
# been loosely updated. Its purpose is that when a developer or translator
# checks out the package via CVS, and the $(DOMAIN).pot file is not in CVS,
@@ -87,10 +123,13 @@ all-no:
# $(POFILES) has been designed to not touch files that don't need to be
# changed.
stamp-po: $(srcdir)/$(DOMAIN).pot
test -z "$(CATALOGS)" || $(MAKE) $(CATALOGS)
@echo "touch stamp-po"
@echo timestamp > stamp-poT
@mv stamp-poT stamp-po
test ! -f $(srcdir)/$(DOMAIN).pot || \
test -z "$(GMOFILES)" || $(MAKE) $(GMOFILES)
@test ! -f $(srcdir)/$(DOMAIN).pot || { \
echo "touch stamp-po" && \
echo timestamp > stamp-poT && \
mv stamp-poT stamp-po; \
}
# Note: Target 'all' must not depend on target '$(DOMAIN).pot-update',
# otherwise packages like GCC can not be built if only parts of the source
@@ -99,11 +138,34 @@ stamp-po: $(srcdir)/$(DOMAIN).pot
# This target rebuilds $(DOMAIN).pot; it is an expensive operation.
# Note that $(DOMAIN).pot is not touched if it doesn't need to be changed.
$(DOMAIN).pot-update: $(POTFILES) $(srcdir)/POTFILES.in remove-potcdate.sed
if LC_ALL=C grep 'GNU @PACKAGE@' $(top_srcdir)/* 2>/dev/null | grep -v 'libtool:' >/dev/null; then \
package_gnu='GNU '; \
else \
package_gnu=''; \
fi; \
if test -n '$(MSGID_BUGS_ADDRESS)' || test '$(PACKAGE_BUGREPORT)' = '@'PACKAGE_BUGREPORT'@'; then \
msgid_bugs_address='$(MSGID_BUGS_ADDRESS)'; \
else \
msgid_bugs_address='$(PACKAGE_BUGREPORT)'; \
fi; \
case `$(XGETTEXT) --version | sed 1q | sed -e 's,^[^0-9]*,,'` in \
'' | 0.[0-9] | 0.[0-9].* | 0.1[0-5] | 0.1[0-5].* | 0.16 | 0.16.[0-1]*) \
$(XGETTEXT) --default-domain=$(DOMAIN) --directory=$(top_srcdir) \
--add-comments=TRANSLATORS: $(XGETTEXT_OPTIONS) \
--add-comments=TRANSLATORS: $(XGETTEXT_OPTIONS) @XGETTEXT_EXTRA_OPTIONS@ \
--files-from=$(srcdir)/POTFILES.in \
--copyright-holder='$(COPYRIGHT_HOLDER)' \
--msgid-bugs-address='$(MSGID_BUGS_ADDRESS)'
--msgid-bugs-address="$$msgid_bugs_address" \
;; \
*) \
$(XGETTEXT) --default-domain=$(DOMAIN) --directory=$(top_srcdir) \
--add-comments=TRANSLATORS: $(XGETTEXT_OPTIONS) @XGETTEXT_EXTRA_OPTIONS@ \
--files-from=$(srcdir)/POTFILES.in \
--copyright-holder='$(COPYRIGHT_HOLDER)' \
--package-name="$${package_gnu}@PACKAGE@" \
--package-version='@VERSION@' \
--msgid-bugs-address="$$msgid_bugs_address" \
;; \
esac
test ! -f $(DOMAIN).po || { \
if test -f $(srcdir)/$(DOMAIN).pot; then \
sed -f remove-potcdate.sed < $(srcdir)/$(DOMAIN).pot > $(DOMAIN).1po && \
@@ -129,16 +191,27 @@ $(srcdir)/$(DOMAIN).pot:
# Note that a PO file is not touched if it doesn't need to be changed.
$(POFILES): $(srcdir)/$(DOMAIN).pot
@lang=`echo $@ | sed -e 's,.*/,,' -e 's/\.po$$//'`; \
if test -f "$(srcdir)/$${lang}.po"; then \
test "$(srcdir)" = . && cdcmd="" || cdcmd="cd $(srcdir) && "; \
echo "$${cdcmd}$(MSGMERGE_UPDATE) $${lang}.po $(DOMAIN).pot"; \
cd $(srcdir) && $(MSGMERGE_UPDATE) $${lang}.po $(DOMAIN).pot
echo "$${cdcmd}$(MSGMERGE_UPDATE) $(MSGMERGE_OPTIONS) --lang=$${lang} $${lang}.po $(DOMAIN).pot"; \
cd $(srcdir) \
&& { case `$(MSGMERGE_UPDATE) --version | sed 1q | sed -e 's,^[^0-9]*,,'` in \
'' | 0.[0-9] | 0.[0-9].* | 0.1[0-7] | 0.1[0-7].*) \
$(MSGMERGE_UPDATE) $(MSGMERGE_OPTIONS) $${lang}.po $(DOMAIN).pot;; \
*) \
$(MSGMERGE_UPDATE) $(MSGMERGE_OPTIONS) --lang=$${lang} $${lang}.po $(DOMAIN).pot;; \
esac; \
}; \
else \
$(MAKE) $${lang}.po-create; \
fi
install: install-exec install-data
install-exec:
install-data: install-data-@USE_NLS@
if test "$(PACKAGE)" = "gettext-tools"; then \
$(mkinstalldirs) $(DESTDIR)$(gettextsrcdir); \
$(mkdir_p) $(DESTDIR)$(gettextsrcdir); \
for file in $(DISTFILES.common) Makevars.template; do \
$(INSTALL_DATA) $(srcdir)/$$file \
$(DESTDIR)$(gettextsrcdir)/$$file; \
@@ -151,13 +224,12 @@ install-data: install-data-@USE_NLS@
fi
install-data-no: all
install-data-yes: all
$(mkinstalldirs) $(DESTDIR)$(datadir)
@catalogs='$(CATALOGS)'; \
for cat in $$catalogs; do \
cat=`basename $$cat`; \
lang=`echo $$cat | sed -e 's/\.gmo$$//'`; \
dir=$(localedir)/$$lang/LC_MESSAGES; \
$(mkinstalldirs) $(DESTDIR)$$dir; \
$(mkdir_p) $(DESTDIR)$$dir; \
if test -r $$cat; then realcat=$$cat; else realcat=$(srcdir)/$$cat; fi; \
$(INSTALL_DATA) $$realcat $(DESTDIR)$$dir/$(DOMAIN).mo; \
echo "installing $$realcat as $(DESTDIR)$$dir/$(DOMAIN).mo"; \
@@ -197,19 +269,18 @@ installdirs: installdirs-exec installdirs-data
installdirs-exec:
installdirs-data: installdirs-data-@USE_NLS@
if test "$(PACKAGE)" = "gettext-tools"; then \
$(mkinstalldirs) $(DESTDIR)$(gettextsrcdir); \
$(mkdir_p) $(DESTDIR)$(gettextsrcdir); \
else \
: ; \
fi
installdirs-data-no:
installdirs-data-yes:
$(mkinstalldirs) $(DESTDIR)$(datadir)
@catalogs='$(CATALOGS)'; \
for cat in $$catalogs; do \
cat=`basename $$cat`; \
lang=`echo $$cat | sed -e 's/\.gmo$$//'`; \
dir=$(localedir)/$$lang/LC_MESSAGES; \
$(mkinstalldirs) $(DESTDIR)$$dir; \
$(mkdir_p) $(DESTDIR)$$dir; \
for lc in '' $(EXTRA_LOCALE_CATEGORIES); do \
if test -n "$$lc"; then \
if (cd $(DESTDIR)$(localedir)/$$lang && LC_ALL=C ls -l -d $$lc 2>/dev/null) | grep ' -> ' >/dev/null; then \
@@ -284,11 +355,14 @@ dist distdir:
$(MAKE) update-po
@$(MAKE) dist2
# This is a separate target because 'update-po' must be executed before.
dist2: $(DISTFILES)
dist2: stamp-po $(DISTFILES)
dists="$(DISTFILES)"; \
if test "$(PACKAGE)" = "gettext-tools"; then \
dists="$$dists Makevars.template"; \
fi; \
if test -f $(srcdir)/$(DOMAIN).pot; then \
dists="$$dists $(DOMAIN).pot stamp-po"; \
fi; \
if test -f $(srcdir)/ChangeLog; then \
dists="$$dists ChangeLog"; \
fi; \
@@ -300,9 +374,9 @@ dist2: $(DISTFILES)
if test -f $(srcdir)/LINGUAS; then dists="$$dists LINGUAS"; fi; \
for file in $$dists; do \
if test -f $$file; then \
cp -p $$file $(distdir); \
cp -p $$file $(distdir) || exit 1; \
else \
cp -p $(srcdir)/$$file $(distdir); \
cp -p $(srcdir)/$$file $(distdir) || exit 1; \
fi; \
done
@@ -311,6 +385,13 @@ update-po: Makefile
test -z "$(UPDATEPOFILES)" || $(MAKE) $(UPDATEPOFILES)
$(MAKE) update-gmo
# General rule for creating PO files.
.nop.po-create:
@lang=`echo $@ | sed -e 's/\.po-create$$//'`; \
echo "File $$lang.po does not exist. If you are a translator, you can create it through 'msginit'." 1>&2; \
exit 1
# General rule for updating PO files.
.nop.po-update:
@@ -319,9 +400,15 @@ update-po: Makefile
tmpdir=`pwd`; \
echo "$$lang:"; \
test "$(srcdir)" = . && cdcmd="" || cdcmd="cd $(srcdir) && "; \
echo "$${cdcmd}$(MSGMERGE) $$lang.po $(DOMAIN).pot -o $$lang.new.po"; \
echo "$${cdcmd}$(MSGMERGE) $(MSGMERGE_OPTIONS) --lang=$$lang $$lang.po $(DOMAIN).pot -o $$lang.new.po"; \
cd $(srcdir); \
if $(MSGMERGE) $$lang.po $(DOMAIN).pot -o $$tmpdir/$$lang.new.po; then \
if { case `$(MSGMERGE) --version | sed 1q | sed -e 's,^[^0-9]*,,'` in \
'' | 0.[0-9] | 0.[0-9].* | 0.1[0-7] | 0.1[0-7].*) \
$(MSGMERGE) $(MSGMERGE_OPTIONS) -o $$tmpdir/$$lang.new.po $$lang.po $(DOMAIN).pot;; \
*) \
$(MSGMERGE) $(MSGMERGE_OPTIONS) --lang=$$lang -o $$tmpdir/$$lang.new.po $$lang.po $(DOMAIN).pot;; \
esac; \
}; then \
if cmp $$lang.po $$tmpdir/$$lang.new.po >/dev/null 2>&1; then \
rm -f $$tmpdir/$$lang.new.po; \
else \
@@ -342,10 +429,13 @@ $(DUMMYPOFILES):
update-gmo: Makefile $(GMOFILES)
@:
Makefile: Makefile.in.in $(top_builddir)/config.status @POMAKEFILEDEPS@
# Recreate Makefile by invoking config.status. Explicitly invoke the shell,
# because execution permission bits may not work on the current file system.
# Use @SHELL@, which is the shell determined by autoconf for the use by its
# scripts, not $(SHELL) which is hardwired to /bin/sh and may be deficient.
Makefile: Makefile.in.in Makevars $(top_builddir)/config.status @POMAKEFILEDEPS@
cd $(top_builddir) \
&& CONFIG_FILES=$(subdir)/$@.in CONFIG_HEADERS= \
$(SHELL) ./config.status
&& @SHELL@ ./config.status $(subdir)/$@.in po-directories
force:

7
po/Rules-quot
View File

@@ -4,6 +4,11 @@ DISTFILES.common.extra1 = quot.sed boldquot.sed en@quot.header en@boldquot.heade
.SUFFIXES: .insert-header .po-update-en
en@quot.po-create:
$(MAKE) en@quot.po-update
en@boldquot.po-create:
$(MAKE) en@boldquot.po-update
en@quot.po-update: en@quot.po-update-en
en@boldquot.po-update: en@boldquot.po-update-en
@@ -15,7 +20,7 @@ en@boldquot.po-update: en@boldquot.po-update-en
ll=`echo $$lang | sed -e 's/@.*//'`; \
LC_ALL=C; export LC_ALL; \
cd $(srcdir); \
if $(MSGINIT) -i $(DOMAIN).pot --no-translator -l $$ll -o - 2>/dev/null | sed -f $$tmpdir/$$lang.insert-header | $(MSGCONV) -t UTF-8 | $(MSGFILTER) sed -f `echo $$lang | sed -e 's/.*@//'`.sed 2>/dev/null > $$tmpdir/$$lang.new.po; then \
if $(MSGINIT) -i $(DOMAIN).pot --no-translator -l $$lang -o - 2>/dev/null | sed -f $$tmpdir/$$lang.insert-header | $(MSGCONV) -t UTF-8 | $(MSGFILTER) sed -f `echo $$lang | sed -e 's/.*@//'`.sed 2>/dev/null > $$tmpdir/$$lang.new.po; then \
if cmp $$lang.po $$tmpdir/$$lang.new.po >/dev/null 2>&1; then \
rm -f $$tmpdir/$$lang.new.po; \
else \