More work on the speech selector.

pi4/build/build-stormux.sh

@@ -442,6 +442,7 @@ packages=(
     man-pages
     networkmanager
     nodm-dgw
+    openevv-git
     openssh
     parted
     pipewire
@@ -548,10 +549,13 @@ if command -v spd-conf > /dev/null 2>&1; then
     spd-conf -n -C || echo "Warning: Speech Dispatcher system configuration failed."
 fi
 if [[ -f /etc/speech-dispatcher/speechd.conf ]]; then
-    if grep -qE '^[[:space:]]*#?[[:space:]]*DefaultModule[[:space:]]+' /etc/speech-dispatcher/speechd.conf; then
+    speechBackup="\$(mktemp)"
-        sed -i -E 's/^[[:space:]]*#?[[:space:]]*DefaultModule[[:space:]]+.*/DefaultModule rhvoice/' /etc/speech-dispatcher/speechd.conf
+    if /usr/local/lib/stormux/select-speech-module \
+        --apply-module rhvoice /etc/speech-dispatcher/speechd.conf "\$speechBackup"; then
+        rm -f "\$speechBackup"
     else
-        printf '\nDefaultModule rhvoice\n' >> /etc/speech-dispatcher/speechd.conf
+        echo "Warning: Could not set RHVoice as the default speech engine."
+        rm -f "\$speechBackup"
     fi
 fi
 # Enable linger so that hopefully sound will start at login.

pi4/files/etc/profile.d/stormux_first_boot.sh

@@ -60,6 +60,8 @@ if [[ -x /etc/audibleprompt.sh ]]; then
     export sudoFlags=("-A")
 fi
 
+/usr/local/lib/stormux/select-speech-module
+
 echo
 echo "Starting Fenrir..."
 spd-say "Starting Fenrir."

pi4/files/usr/local/bin/configure-stormux

@@ -104,6 +104,13 @@ EndSection
 EOF
 }
 
+restart_fenrir_speech() {
+    if systemctl is-active --quiet fenrirscreenreader.service; then
+        killall speech-dispatcher 2>/dev/null || true
+        systemctl restart fenrirscreenreader.service
+    fi
+}
+
 set_timezone() {
     # Get the list of timezones
     mapfile -t regions < <(timedatectl --no-pager list-timezones | cut -d '/' -f1 | sort -u)
@@ -136,8 +143,8 @@ set_timezone() {
 if read_yes_no "Would you like to switch Fenrir to laptop layout?"; then
     sed -i 's/=desktop/=laptop/' /etc/fenrirscreenreader/settings/settings.conf
     clear
-    systemctl restart fenrirscreenreader.service
 fi
+restart_fenrir_speech
 
 if command -v i3 > /dev/null 2>&1 && systemctl list-unit-files nodm.service > /dev/null 2>&1; then
     if read_yes_no "Will this Pi be connected to a physical screen?"; then

pi4/files/usr/local/lib/stormux/select-speech-module

@@ -0,0 +1,334 @@
+#!/usr/bin/env bash
+
+set -u
+
+speechConfig="${STORMUX_SPEECH_CONFIG:-/etc/speech-dispatcher/speechd.conf}"
+selectionFile=""
+spdSayCommand="${STORMUX_SPD_SAY:-spd-say}"
+systemctlCommand="${STORMUX_SYSTEMCTL:-systemctl}"
+socatCommand="${STORMUX_SOCAT:-socat}"
+fenrirSocket="${STORMUX_FENRIR_SOCKET:-/tmp/fenrirscreenreader-daemon.sock}"
+scriptPath="$(readlink -f "$0")"
+runtimeDir="${STORMUX_RUNTIME_DIR:-/run/stormux}"
+fenrirSpeechMuted=false
+
+is_safe_module() {
+    [[ "$1" =~ ^[A-Za-z0-9][A-Za-z0-9_.-]*$ ]]
+}
+
+apply_module() {
+    local moduleName="$1"
+    local configPath="$2"
+    local backupPath="$3"
+    local tempPath
+
+    is_safe_module "$moduleName" || return 1
+    [[ -f "$configPath" ]] || return 1
+
+    mkdir -p "${backupPath%/*}" || return 1
+    cp --preserve=mode,ownership,timestamps "$configPath" "$backupPath" || return 1
+    tempPath="$(mktemp "${configPath}.stormux.XXXXXX")" || return 1
+
+    if ! awk -v moduleName="$moduleName" '
+        BEGIN { wroteDefault = 0 }
+        /^[[:space:]]*#?[[:space:]]*DefaultModule[[:space:]]+/ {
+            if (!wroteDefault) {
+                print "DefaultModule " moduleName
+                wroteDefault = 1
+            }
+            next
+        }
+        { print }
+        END {
+            if (!wroteDefault) {
+                print ""
+                print "DefaultModule " moduleName
+            }
+        }
+    ' "$configPath" > "$tempPath"; then
+        rm -f "$tempPath"
+        return 1
+    fi
+
+    chown --reference="$configPath" "$tempPath" || {
+        rm -f "$tempPath"
+        return 1
+    }
+    chmod --reference="$configPath" "$tempPath" || {
+        rm -f "$tempPath"
+        return 1
+    }
+    mv -f "$tempPath" "$configPath"
+}
+
+restore_config() {
+    local configPath="$1"
+    local backupPath="$2"
+    local tempPath
+
+    [[ -f "$backupPath" ]] || return 1
+    tempPath="$(mktemp "${configPath}.stormux.XXXXXX")" || return 1
+    if ! cp --preserve=mode,ownership,timestamps "$backupPath" "$tempPath"; then
+        rm -f "$tempPath"
+        return 1
+    fi
+    mv -f "$tempPath" "$configPath" || return 1
+    rm -f "$backupPath"
+}
+
+write_selection() {
+    local moduleName="$1"
+    local targetPath="$2"
+    local tempPath
+
+    is_safe_module "$moduleName" || return 1
+    mkdir -p "${targetPath%/*}" || return 1
+    tempPath="$(mktemp "${targetPath}.stormux.XXXXXX")" || return 1
+    printf '%s\n' "$moduleName" > "$tempPath" || {
+        rm -f "$tempPath"
+        return 1
+    }
+    chmod 644 "$tempPath" || {
+        rm -f "$tempPath"
+        return 1
+    }
+    mv -f "$tempPath" "$targetPath"
+}
+
+case "${1:-}" in
+    --apply-module)
+        [[ $# -eq 4 ]] || exit 2
+        apply_module "$2" "$3" "$4"
+        exit $?
+        ;;
+    --restore-config)
+        [[ $# -eq 3 ]] || exit 2
+        restore_config "$2" "$3"
+        exit $?
+        ;;
+    --write-selection)
+        [[ $# -eq 3 ]] || exit 2
+        write_selection "$2" "$3"
+        exit $?
+        ;;
+esac
+
+while [[ $# -gt 0 ]]; do
+    case "$1" in
+        --config)
+            [[ $# -ge 2 ]] || exit 2
+            speechConfig="$2"
+            shift 2
+            ;;
+        --selection-file)
+            [[ $# -ge 2 ]] || exit 2
+            selectionFile="$2"
+            shift 2
+            ;;
+        *)
+            printf 'Unknown option: %s\n' "$1" >&2
+            exit 2
+            ;;
+    esac
+done
+
+sudoCommand=(sudo)
+if [[ -n "${SUDO_ASKPASS:-}" ]]; then
+    sudoCommand+=(-A)
+fi
+
+announce_failure() {
+    local previousModule="$1"
+    local message="Speech engine selection failed. Your previous speech engine is still selected."
+
+    "$spdSayCommand" -C >/dev/null 2>&1 || true
+    if is_safe_module "$previousModule"; then
+        "$spdSayCommand" -o "$previousModule" "$message" >/dev/null 2>&1 || \
+            "$spdSayCommand" "$message" >/dev/null 2>&1 || true
+    else
+        "$spdSayCommand" "$message" >/dev/null 2>&1 || true
+    fi
+    printf '%s\n' "$message" >&2
+}
+
+set_fenrir_speech() {
+    local enabled="$1"
+
+    printf 'setting set speech#enabled=%s\n' "$enabled" | \
+        "$socatCommand" - UNIX-CLIENT:"$fenrirSocket" >/dev/null 2>&1
+}
+
+mute_fenrir_speech() {
+    if "$systemctlCommand" is-active --quiet fenrirscreenreader.service 2>/dev/null && \
+        set_fenrir_speech False; then
+        fenrirSpeechMuted=true
+    fi
+}
+
+restore_fenrir_speech() {
+    if [[ "$fenrirSpeechMuted" == true ]]; then
+        set_fenrir_speech True || true
+        fenrirSpeechMuted=false
+    fi
+}
+
+trap restore_fenrir_speech EXIT
+trap 'exit 130' HUP INT TERM
+
+discover_modules() {
+    local output line candidate
+    local skippedHeading=false
+
+    if ! output="$("$spdSayCommand" -O 2>/dev/null)"; then
+        return 1
+    fi
+
+    modules=()
+    while IFS= read -r line; do
+        candidate="${line%$'\r'}"
+        candidate="${candidate#"${candidate%%[![:space:]]*}"}"
+        candidate="${candidate%"${candidate##*[![:space:]]}"}"
+        [[ -n "$candidate" ]] || continue
+        if [[ "$skippedHeading" == false ]]; then
+            skippedHeading=true
+            continue
+        fi
+        is_safe_module "$candidate" || continue
+        modules+=("$candidate")
+    done <<< "$output"
+
+    [[ ${#modules[@]} -gt 0 ]]
+}
+
+configured_module() {
+    local configured=""
+
+    if [[ -r "$speechConfig" ]]; then
+        configured="$(awk '$1 == "DefaultModule" { print $2; exit }' "$speechConfig")"
+    fi
+    if ! is_safe_module "$configured"; then
+        configured="rhvoice"
+    fi
+    printf '%s\n' "$configured"
+}
+
+module_index() {
+    local wanted="$1"
+    local index
+
+    for index in "${!modules[@]}"; do
+        if [[ "${modules[$index]}" == "$wanted" ]]; then
+            printf '%s\n' "$index"
+            return 0
+        fi
+    done
+    return 1
+}
+
+draw_menu() {
+    local index
+
+    printf '\033[H\033[2J'
+    printf 'Select the default speech engine. Use Up and Down, Enter to select, or Escape to keep the current engine.\n\n'
+    for index in "${!modules[@]}"; do
+        if [[ $index -eq $selectedIndex ]]; then
+            printf '> %s\n' "${modules[$index]}"
+        else
+            printf '  %s\n' "${modules[$index]}"
+        fi
+    done
+}
+
+read_menu_key() {
+    local first rest=""
+
+    IFS= read -rsn1 first || return 1
+    if [[ -z "$first" ]]; then
+        printf 'enter\n'
+        return 0
+    fi
+    if [[ "$first" == $'\033' ]]; then
+        IFS= read -rsn2 -t 0.1 rest || true
+        case "$rest" in
+            '[A') printf 'up\n' ;;
+            '[B') printf 'down\n' ;;
+            '') printf 'escape\n' ;;
+            *) printf 'other\n' ;;
+        esac
+        return 0
+    fi
+    printf 'other\n'
+}
+
+declare -a modules=()
+previousModule="$(configured_module)"
+mute_fenrir_speech
+if ! discover_modules; then
+    announce_failure "$previousModule"
+    exit 0
+fi
+
+if ! selectedIndex="$(module_index "$previousModule")"; then
+    if selectedIndex="$(module_index rhvoice)"; then
+        :
+    else
+        selectedIndex=0
+    fi
+fi
+
+draw_menu
+"$spdSayCommand" "Use up and down arrows to select the default voice for this computer. ${modules[$selectedIndex]} is highlighted. Press Enter to select, or Escape to keep the current voice." >/dev/null 2>&1 || true
+
+while true; do
+    if ! keyName="$(read_menu_key)"; then
+        announce_failure "$previousModule"
+        exit 0
+    fi
+    case "$keyName" in
+        up)
+            selectedIndex=$(( (selectedIndex - 1 + ${#modules[@]}) % ${#modules[@]} ))
+            ;;
+        down)
+            selectedIndex=$(( (selectedIndex + 1) % ${#modules[@]} ))
+            ;;
+        enter)
+            break
+            ;;
+        escape)
+            "$spdSayCommand" -C >/dev/null 2>&1 || true
+            "$spdSayCommand" -o "$previousModule" "Keeping ${previousModule} as the default speech engine." >/dev/null 2>&1 || true
+            exit 0
+            ;;
+        *)
+            continue
+            ;;
+    esac
+
+    draw_menu
+    moduleName="${modules[$selectedIndex]}"
+    "$spdSayCommand" -C >/dev/null 2>&1 || true
+    "$spdSayCommand" -o "$moduleName" "This is ${moduleName}. If selected, I will be your default text-to-speech voice." >/dev/null 2>&1 || true
+done
+
+selectedModule="${modules[$selectedIndex]}"
+backupFile="${runtimeDir}/speechd.conf.$$.backup"
+"$spdSayCommand" -C >/dev/null 2>&1 || true
+
+if ! "${sudoCommand[@]}" "$scriptPath" --apply-module "$selectedModule" "$speechConfig" "$backupFile"; then
+    "${sudoCommand[@]}" "$scriptPath" --restore-config "$speechConfig" "$backupFile" >/dev/null 2>&1 || true
+    announce_failure "$previousModule"
+    exit 0
+fi
+
+if [[ -n "$selectionFile" ]]; then
+    if ! "${sudoCommand[@]}" "$scriptPath" --write-selection "$selectedModule" "$selectionFile"; then
+        "${sudoCommand[@]}" "$scriptPath" --restore-config "$speechConfig" "$backupFile" >/dev/null 2>&1 || true
+        announce_failure "$previousModule"
+        exit 0
+    fi
+fi
+
+rm -f "$backupFile" 2>/dev/null || "${sudoCommand[@]}" rm -f "$backupFile" 2>/dev/null || true
+
+"$spdSayCommand" -o "$selectedModule" "${selectedModule} is now the default speech engine." >/dev/null 2>&1 || true
+printf 'Default speech engine set to %s.\n' "$selectedModule"

scripts/xlibre-video-dummy-with-vt/.SRCINFO

@@ -1,23 +0,0 @@
-pkgbase = xlibre-video-dummy-with-vt
-	pkgdesc = XLibre dummy video driver with an allocated vt
-	pkgver = 25.0.0
-	pkgrel = 5
-	url = https://github.com/X11Libre/xf86-video-dummy
-	arch = x86_64
-	arch = aarch64
-	groups = xlibre-drivers
-	license = MIT
-	license = X11
-	makedepends = xlibre-xserver-devel>=25.0
-	makedepends = xorgproto
-	depends = xlibre-xserver>=25.0
-	depends = glibc
-	provides = xf86-video-dummy
-	provides = x11win-video-dummy
-	conflicts = xf86-video-dummy
-	source = https://github.com/X11Libre/xf86-video-dummy/archive/refs/tags/xlibre-xf86-video-dummy-25.0.0.tar.gz
-	source = dummy_driver.patch
-	sha256sums = b56e610705cd3d4d86422a11c6b0d93357e4d4749a05178a85fd250301d357b9
-	sha256sums = 68cdcf21e9b54a7fdb8e968292e1ef9ad154ddb1361b141a0a635c2a13c92bfa
-
-pkgname = xlibre-video-dummy-with-vt

scripts/xlibre-video-dummy-with-vt/.gitignore

@@ -1,5 +0,0 @@
-*
-!PKGBUILD
-!.SRCINFO
-!.gitignore
-!.nvchecker.toml

scripts/xlibre-video-dummy-with-vt/.nvchecker.toml

@@ -1,5 +0,0 @@
-[xlibre-video-dummy]
-source = "git"
-git = "https://github.com/x11libre/xf86-video-dummy.git"
-include_regex = "xlibre-xf86-video-dummy-.*"
-prefix = "xlibre-xf86-video-dummy-"

scripts/xlibre-video-dummy-with-vt/PKGBUILD

@@ -1,59 +0,0 @@
-# Maintainer: Storm Dragon <storm_dragon@linux-a11y.org>
-
-pkgname=xlibre-video-dummy-with-vt
-pkgver=25.0.0
-pkgrel=5
-pkgdesc="XLibre dummy video driver with an allocated vt"
-arch=(x86_64 aarch64)
-_pkgname=xf86-video-dummy
-url="https://github.com/X11Libre/${_pkgname}"
-license=('MIT' 'X11')
-depends=("xlibre-xserver>=${pkgver%.*}" 'glibc')
-makedepends=("xlibre-xserver-devel>=${pkgver%.*}" 'xorgproto')
-conflicts=("${_pkgname}")
-provides=("${_pkgname}" 'x11win-video-dummy')
-source=("${url}/archive/refs/tags/xlibre-${_pkgname}-${pkgver}.tar.gz"
-        "dummy_driver.patch")
-groups=('xlibre-drivers')
-sha256sums=('b56e610705cd3d4d86422a11c6b0d93357e4d4749a05178a85fd250301d357b9'
-            '68cdcf21e9b54a7fdb8e968292e1ef9ad154ddb1361b141a0a635c2a13c92bfa')
-
-prepare() {
-  cd "${srcdir}/${_pkgname}-xlibre-${_pkgname}-${pkgver}/src"
-  patch -i "${srcdir}/dummy_driver.patch"
-}
-
-build() {
-  case "$CARCH" in
-    "x86_64")
-      CFLAGS=" -march=x86-64"
-      ;;
-    "aarch64")
-      CFLAGS=" -march=armv8-a"
-      ;;
-    *)
-      CFLAGS=" -march=native"
-      ;;
-  esac
-  CFLAGS+=" -mtune=generic -O2 -pipe -fexceptions -Wp,-D_FORTIFY_SOURCE=3 -Wformat -Werror=format-security"
-  CFLAGS+=" -fstack-clash-protection -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer"
-  LDFLAGS=" -Wl,-O1 -Wl,--sort-common -Wl,--as-needed -Wl,-z,lazy -Wl,-z,relro -Wl,-z,pack-relative-relocs"
-  if [[ $CARCH != 'aarch64' ]]; then
-    CFLAGS+=" -fcf-protection"
-  fi
-  CXXFLAGS="${CFLAGS} -Wp,-D_GLIBCXX_ASSERTIONS"
-  export CFLAGS="${CFLAGS}"
-  export CXXFLAGS="${CXXFLAGS}"
-  export LDFLAGS="${LDFLAGS}"
-
-  cd "${srcdir}/${_pkgname}-xlibre-${_pkgname}-${pkgver}"
-  ./autogen.sh
-  ./configure --prefix=/usr
-  make
-}
-
-package() {
-  cd "${srcdir}/${_pkgname}-xlibre-${_pkgname}-${pkgver}"
-  make DESTDIR="${pkgdir}" install
-  install -Dm644 COPYING "${pkgdir}/usr/share/licenses/${pkgname}/LICENSE"
-}

scripts/xlibre-video-dummy-with-vt/dummy_driver.patch

@@ -1,17 +0,0 @@
---- a/src/dummy_driver.c
-+++ b/src/dummy_driver.c
-@@ -1016,10 +1016,10 @@ dummyDriverFunc(ScrnInfoPtr pScrn, xorgDriverFuncOp op, pointer ptr)
-     CARD32 *flag;
- 
-     switch (op) {
--        case GET_REQUIRED_HW_INTERFACES:
--            flag = (CARD32*)ptr;
--            (*flag) = HW_SKIP_CONSOLE;
--            return TRUE;
-+    case GET_REQUIRED_HW_INTERFACES:
-+        flag = (CARD32*)ptr;
-+        /* Allow the driver to allocate a VT instead of skipping the console. */
-+        return TRUE;
-         default:
-             return FALSE;
-     }

tests/test-select-speech-module.sh

@@ -0,0 +1,180 @@
+#!/usr/bin/env bash
+
+set -euo pipefail
+
+repoRoot="$(cd "$(dirname "${BASH_SOURCE[0]}")/.." && pwd)"
+selector="$repoRoot/pi4/files/usr/local/lib/stormux/select-speech-module"
+tempDir="$(mktemp -d)"
+mockBin="$tempDir/bin"
+testCount=0
+
+cleanup() {
+    rm -rf "$tempDir"
+}
+trap cleanup EXIT
+
+mkdir -p "$mockBin" "$tempDir/runtime"
+
+cat > "$mockBin/sudo" <<'EOF'
+#!/usr/bin/env bash
+if [[ "${1:-}" == "-A" ]]; then
+    shift
+fi
+if [[ "${MOCK_SUDO_FAIL_WRITE:-no}" == "yes" && "$*" == *"--write-selection"* ]]; then
+    exit 1
+fi
+exec "$@"
+EOF
+
+cat > "$mockBin/spd-say" <<'EOF'
+#!/usr/bin/env bash
+printf '%s\n' "$*" >> "$MOCK_LOG"
+if [[ "${1:-}" == "-O" ]]; then
+    cat "$MOCK_MODULES"
+    exit "${MOCK_DISCOVERY_STATUS:-0}"
+fi
+exit 0
+EOF
+
+cat > "$mockBin/socat" <<'EOF'
+#!/usr/bin/env bash
+read -r command
+printf 'socat %s: %s\n' "$*" "$command" >> "$MOCK_LOG"
+EOF
+
+cat > "$mockBin/systemctl" <<'EOF'
+#!/usr/bin/env bash
+printf 'systemctl %s\n' "$*" >> "$MOCK_LOG"
+if [[ "${1:-}" == "is-active" ]]; then
+    [[ "${MOCK_FENRIR_ACTIVE:-no}" == "yes" ]]
+    exit
+fi
+exit 0
+EOF
+chmod 755 "$mockBin"/*
+
+fail() {
+    printf 'FAIL: %s\n' "$1" >&2
+    exit 1
+}
+
+assert_equals() {
+    local expected="$1"
+    local actual="$2"
+    local description="$3"
+
+    [[ "$actual" == "$expected" ]] || fail "$description (expected '$expected', got '$actual')"
+}
+
+assert_file_contains() {
+    local filePath="$1"
+    local pattern="$2"
+    local description="$3"
+
+    grep -qE -- "$pattern" "$filePath" || fail "$description"
+}
+
+assert_file_absent() {
+    local filePath="$1"
+    local description="$2"
+
+    [[ ! -e "$filePath" ]] || fail "$description"
+}
+
+reset_case() {
+    caseDir="$tempDir/case-$testCount"
+    testCount=$((testCount + 1))
+    mkdir -p "$caseDir/runtime"
+    configFile="$caseDir/speechd.conf"
+    selectionFile="$caseDir/selected"
+    modulesFile="$caseDir/modules"
+    mockLog="$caseDir/mock.log"
+    : > "$mockLog"
+    printf 'OUTPUT MODULES\nrhvoice\nopenevv\nespeak-ng\n' > "$modulesFile"
+    printf '# Speech Dispatcher\nDefaultModule rhvoice\n' > "$configFile"
+}
+
+run_selector() {
+    local input="$1"
+
+    printf '%b' "$input" | env \
+        PATH="$mockBin:$PATH" \
+        MOCK_LOG="$mockLog" \
+        MOCK_MODULES="$modulesFile" \
+        MOCK_DISCOVERY_STATUS="${MOCK_DISCOVERY_STATUS:-0}" \
+        MOCK_FENRIR_ACTIVE="${MOCK_FENRIR_ACTIVE:-no}" \
+        MOCK_SUDO_FAIL_WRITE="${MOCK_SUDO_FAIL_WRITE:-no}" \
+        STORMUX_SPEECH_CONFIG="$configFile" \
+        STORMUX_RUNTIME_DIR="$caseDir/runtime" \
+        STORMUX_SPD_SAY=spd-say \
+        STORMUX_SOCAT=socat \
+        STORMUX_SYSTEMCTL=systemctl \
+        "$selector" --selection-file "$selectionFile" >/dev/null
+}
+
+# Enter accepts the configured initial module and collapses duplicate directives.
+reset_case
+printf 'DefaultModule rhvoice\n# DefaultModule espeak-ng\nDefaultModule openevv\n' > "$configFile"
+MOCK_FENRIR_ACTIVE=yes run_selector '\n'
+assert_equals 1 "$(grep -c '^DefaultModule ' "$configFile")" "initial selection should leave one active default"
+assert_file_contains "$configFile" '^DefaultModule rhvoice$' "initial selection should retain rhvoice"
+assert_equals rhvoice "$(< "$selectionFile")" "initial selection should be recorded"
+assert_file_contains "$mockLog" 'speech#enabled=False' "active Fenrir speech should be muted"
+assert_file_contains "$mockLog" 'speech#enabled=True' "active Fenrir speech should be restored"
+assert_file_contains "$mockLog" 'Use up and down arrows to select the default voice for this computer\.' "the selector should voice its own instructions"
+if grep -q '^systemctl restart ' "$mockLog"; then
+    fail "the selector should defer the Fenrir restart until after layout selection"
+fi
+
+# Down previews and selects the next module.
+reset_case
+run_selector 'x\033[B\n'
+assert_file_contains "$mockLog" '^-o openevv This is openevv\.' "Down should preview OpenEVV"
+assert_file_contains "$configFile" '^DefaultModule openevv$' "Down then Enter should select OpenEVV"
+
+# Up wraps from the first module to the last.
+reset_case
+run_selector '\033[A\n'
+assert_file_contains "$mockLog" '^-o espeak-ng This is espeak-ng\.' "Up should wrap and preview eSpeak NG"
+assert_file_contains "$configFile" '^DefaultModule espeak-ng$' "wrapped module should persist"
+
+# Escape retains the prior file and does not create an installer selection.
+reset_case
+cp "$configFile" "$caseDir/original.conf"
+run_selector '\033'
+cmp -s "$configFile" "$caseDir/original.conf" || fail "Escape should retain the configuration"
+assert_file_absent "$selectionFile" "Escape should not record an installer selection"
+
+# Empty discovery fails safely.
+reset_case
+printf 'OUTPUT MODULES\n' > "$modulesFile"
+cp "$configFile" "$caseDir/original.conf"
+run_selector '\n'
+cmp -s "$configFile" "$caseDir/original.conf" || fail "empty discovery should retain the configuration"
+assert_file_absent "$selectionFile" "empty discovery should not record a selection"
+
+# Unsafe names are rejected rather than passed to spd-say or configuration.
+reset_case
+printf 'OUTPUT MODULES\nbad name\n;command\nopenevv\n' > "$modulesFile"
+run_selector '\n'
+assert_file_contains "$configFile" '^DefaultModule openevv$' "the remaining safe module should be selected"
+if grep -qE 'bad name|;command' "$mockLog"; then
+    fail "unsafe module names should not reach spd-say"
+fi
+
+# A missing configuration simulates failed persistence and remains nonfatal.
+reset_case
+rm -f "$configFile"
+MOCK_FENRIR_ACTIVE=yes run_selector '\n'
+assert_file_absent "$selectionFile" "failed persistence should not record a selection"
+assert_file_contains "$mockLog" 'selection failed' "failed persistence should be announced"
+assert_file_contains "$mockLog" 'speech#enabled=True' "failed persistence should restore Fenrir speech"
+
+# Failure to record the live choice also rolls the system configuration back.
+reset_case
+cp "$configFile" "$caseDir/original.conf"
+MOCK_SUDO_FAIL_WRITE=yes run_selector '\033[B\n'
+cmp -s "$configFile" "$caseDir/original.conf" || fail "selection-file failure should roll back the configuration"
+assert_file_absent "$selectionFile" "selection-file failure should leave no selection"
+
+printf 'PASS: %s speech selector cases\n' "$testCount"

x86_64/airootfs/etc/pacman.conf

@@ -76,7 +76,7 @@ LocalFileSigLevel = Optional
 #[core-testing]
 #Include = /etc/pacman.d/mirrorlist
 
-[xlibre]
+[xlibre-stable]
 SigLevel = Required DatabaseOptional
 Server = https://packages.xlibre.net/arch/stable/$arch
 

x86_64/airootfs/etc/profile.d/stormux_first_boot.sh

@@ -32,7 +32,7 @@ while [[ $volume -le 130 ]]; do
     clear
     pactl set-sink-volume @DEFAULT_SINK@ "${volume}%" 2>/dev/null
     spd-say "If this is loud enough, press enter."
-    if read -t4 ; then
+    if read -r -t4 ; then
         echo "Volume set to ${volume}%"
         break
     else
@@ -47,6 +47,9 @@ if [[ -x /etc/audibleprompt.sh ]]; then
     export sudoFlags=("-A")
 fi
 
+/usr/local/lib/stormux/select-speech-module \
+    --selection-file /run/stormux/selected-speech-module
+
 clear
 cat << "EOF"
 Hello, and welcome to Stormux!

x86_64/airootfs/root/customize_airootfs.sh

@@ -94,6 +94,20 @@ locale-gen
 install_sas
 install_rhvoice_english_fixes
 
+if command -v spd-conf > /dev/null 2>&1; then
+    spd-conf -n -C || echo "Warning: Speech Dispatcher system configuration failed."
+fi
+if [[ -f /etc/speech-dispatcher/speechd.conf ]]; then
+    speechBackup="$(mktemp)"
+    if /usr/local/lib/stormux/select-speech-module \
+        --apply-module rhvoice /etc/speech-dispatcher/speechd.conf "$speechBackup"; then
+        rm -f "$speechBackup"
+    else
+        echo "Warning: Could not set RHVoice as the default speech engine."
+        rm -f "$speechBackup"
+    fi
+fi
+
 # Enable system services
 systemctl enable NetworkManager.service
 systemctl enable fenrirscreenreader.service

x86_64/airootfs/usr/local/bin/configure-stormux

@@ -37,6 +37,14 @@ set_timezone() {
     ln -sf /usr/share/zoneinfo/"${region}"/"${city}" /etc/localtime
     timedatectl set-ntp true
 }
+
+restart_fenrir_speech() {
+    if systemctl is-active --quiet fenrirscreenreader.service; then
+        killall speech-dispatcher 2>/dev/null || true
+        systemctl restart fenrirscreenreader.service
+    fi
+}
+
 # Offer to switch fenrir layout.
 echo "Would you like to switch Fenrir to laptop layout?"
 echo "Press y for yes or n for no followed by enter."
@@ -45,8 +53,8 @@ continue="${continue::1}"
 if [[ "${continue,}" == "y" ]];then
     sed -i 's/=desktop/=laptop/' /etc/fenrirscreenreader/settings/settings.conf
     clear
-    systemctl restart fenrirscreenreader.service
 fi
+restart_fenrir_speech
 
 if ! ping -c1 stormux.org &> /dev/null ; then
     echo "No internet connection detected. Press enter to open NetworkManager."

x86_64/airootfs/usr/local/bin/install-stormux

@@ -31,6 +31,14 @@ errorCount=0
 warningCount=0
 currentStep="initialization"
 cleanupOnError=false
+selectedSpeechModule="rhvoice"
+
+if [[ -r /run/stormux/selected-speech-module ]]; then
+    mapfile -t selectedSpeechLines < /run/stormux/selected-speech-module
+    if [[ ${#selectedSpeechLines[@]} -eq 1 && "${selectedSpeechLines[0]}" =~ ^[A-Za-z0-9][A-Za-z0-9_.-]*$ ]]; then
+        selectedSpeechModule="${selectedSpeechLines[0]}"
+    fi
+fi
 
 
 #
@@ -1412,7 +1420,7 @@ install_base_system() {
     # Stormux-specific packages (installed later in chroot after keyring setup)
     # Note: NOT local so it's available in configure_system()
     stormuxPackages=(
-        yay w3m-git
+        openevv-git yay w3m-git
     )
 
     # Combine all packages
@@ -1902,11 +1910,28 @@ if command -v spd-conf > /dev/null 2>&1; then
 fi
 
 if [[ -f /etc/speech-dispatcher/speechd.conf ]]; then
-    if grep -qE '^[[:space:]]*#?[[:space:]]*DefaultModule[[:space:]]+' /etc/speech-dispatcher/speechd.conf; then
+    speechConfig=/etc/speech-dispatcher/speechd.conf
-        sed -i -E 's/^[[:space:]]*#?[[:space:]]*DefaultModule[[:space:]]+.*/DefaultModule rhvoice/' /etc/speech-dispatcher/speechd.conf
+    speechConfigTemp="\$(mktemp "\${speechConfig}.stormux.XXXXXX")"
-    else
+    awk -v moduleName="${selectedSpeechModule}" '
-        printf '\nDefaultModule rhvoice\n' >> /etc/speech-dispatcher/speechd.conf
+        BEGIN { wroteDefault = 0 }
-    fi
+        /^[[:space:]]*#?[[:space:]]*DefaultModule[[:space:]]+/ {
+            if (!wroteDefault) {
+                print "DefaultModule " moduleName
+                wroteDefault = 1
+            }
+            next
+        }
+        { print }
+        END {
+            if (!wroteDefault) {
+                print ""
+                print "DefaultModule " moduleName
+            }
+        }
+    ' "\$speechConfig" > "\$speechConfigTemp"
+    chown --reference="\$speechConfig" "\$speechConfigTemp"
+    chmod --reference="\$speechConfig" "\$speechConfigTemp"
+    mv -f "\$speechConfigTemp" "\$speechConfig"
 fi
 
 # Create system-wide accessibility configuration

x86_64/airootfs/usr/local/lib/stormux/select-speech-module

@@ -0,0 +1,334 @@
+#!/usr/bin/env bash
+
+set -u
+
+speechConfig="${STORMUX_SPEECH_CONFIG:-/etc/speech-dispatcher/speechd.conf}"
+selectionFile=""
+spdSayCommand="${STORMUX_SPD_SAY:-spd-say}"
+systemctlCommand="${STORMUX_SYSTEMCTL:-systemctl}"
+socatCommand="${STORMUX_SOCAT:-socat}"
+fenrirSocket="${STORMUX_FENRIR_SOCKET:-/tmp/fenrirscreenreader-daemon.sock}"
+scriptPath="$(readlink -f "$0")"
+runtimeDir="${STORMUX_RUNTIME_DIR:-/run/stormux}"
+fenrirSpeechMuted=false
+
+is_safe_module() {
+    [[ "$1" =~ ^[A-Za-z0-9][A-Za-z0-9_.-]*$ ]]
+}
+
+apply_module() {
+    local moduleName="$1"
+    local configPath="$2"
+    local backupPath="$3"
+    local tempPath
+
+    is_safe_module "$moduleName" || return 1
+    [[ -f "$configPath" ]] || return 1
+
+    mkdir -p "${backupPath%/*}" || return 1
+    cp --preserve=mode,ownership,timestamps "$configPath" "$backupPath" || return 1
+    tempPath="$(mktemp "${configPath}.stormux.XXXXXX")" || return 1
+
+    if ! awk -v moduleName="$moduleName" '
+        BEGIN { wroteDefault = 0 }
+        /^[[:space:]]*#?[[:space:]]*DefaultModule[[:space:]]+/ {
+            if (!wroteDefault) {
+                print "DefaultModule " moduleName
+                wroteDefault = 1
+            }
+            next
+        }
+        { print }
+        END {
+            if (!wroteDefault) {
+                print ""
+                print "DefaultModule " moduleName
+            }
+        }
+    ' "$configPath" > "$tempPath"; then
+        rm -f "$tempPath"
+        return 1
+    fi
+
+    chown --reference="$configPath" "$tempPath" || {
+        rm -f "$tempPath"
+        return 1
+    }
+    chmod --reference="$configPath" "$tempPath" || {
+        rm -f "$tempPath"
+        return 1
+    }
+    mv -f "$tempPath" "$configPath"
+}
+
+restore_config() {
+    local configPath="$1"
+    local backupPath="$2"
+    local tempPath
+
+    [[ -f "$backupPath" ]] || return 1
+    tempPath="$(mktemp "${configPath}.stormux.XXXXXX")" || return 1
+    if ! cp --preserve=mode,ownership,timestamps "$backupPath" "$tempPath"; then
+        rm -f "$tempPath"
+        return 1
+    fi
+    mv -f "$tempPath" "$configPath" || return 1
+    rm -f "$backupPath"
+}
+
+write_selection() {
+    local moduleName="$1"
+    local targetPath="$2"
+    local tempPath
+
+    is_safe_module "$moduleName" || return 1
+    mkdir -p "${targetPath%/*}" || return 1
+    tempPath="$(mktemp "${targetPath}.stormux.XXXXXX")" || return 1
+    printf '%s\n' "$moduleName" > "$tempPath" || {
+        rm -f "$tempPath"
+        return 1
+    }
+    chmod 644 "$tempPath" || {
+        rm -f "$tempPath"
+        return 1
+    }
+    mv -f "$tempPath" "$targetPath"
+}
+
+case "${1:-}" in
+    --apply-module)
+        [[ $# -eq 4 ]] || exit 2
+        apply_module "$2" "$3" "$4"
+        exit $?
+        ;;
+    --restore-config)
+        [[ $# -eq 3 ]] || exit 2
+        restore_config "$2" "$3"
+        exit $?
+        ;;
+    --write-selection)
+        [[ $# -eq 3 ]] || exit 2
+        write_selection "$2" "$3"
+        exit $?
+        ;;
+esac
+
+while [[ $# -gt 0 ]]; do
+    case "$1" in
+        --config)
+            [[ $# -ge 2 ]] || exit 2
+            speechConfig="$2"
+            shift 2
+            ;;
+        --selection-file)
+            [[ $# -ge 2 ]] || exit 2
+            selectionFile="$2"
+            shift 2
+            ;;
+        *)
+            printf 'Unknown option: %s\n' "$1" >&2
+            exit 2
+            ;;
+    esac
+done
+
+sudoCommand=(sudo)
+if [[ -n "${SUDO_ASKPASS:-}" ]]; then
+    sudoCommand+=(-A)
+fi
+
+announce_failure() {
+    local previousModule="$1"
+    local message="Speech engine selection failed. Your previous speech engine is still selected."
+
+    "$spdSayCommand" -C >/dev/null 2>&1 || true
+    if is_safe_module "$previousModule"; then
+        "$spdSayCommand" -o "$previousModule" "$message" >/dev/null 2>&1 || \
+            "$spdSayCommand" "$message" >/dev/null 2>&1 || true
+    else
+        "$spdSayCommand" "$message" >/dev/null 2>&1 || true
+    fi
+    printf '%s\n' "$message" >&2
+}
+
+set_fenrir_speech() {
+    local enabled="$1"
+
+    printf 'setting set speech#enabled=%s\n' "$enabled" | \
+        "$socatCommand" - UNIX-CLIENT:"$fenrirSocket" >/dev/null 2>&1
+}
+
+mute_fenrir_speech() {
+    if "$systemctlCommand" is-active --quiet fenrirscreenreader.service 2>/dev/null && \
+        set_fenrir_speech False; then
+        fenrirSpeechMuted=true
+    fi
+}
+
+restore_fenrir_speech() {
+    if [[ "$fenrirSpeechMuted" == true ]]; then
+        set_fenrir_speech True || true
+        fenrirSpeechMuted=false
+    fi
+}
+
+trap restore_fenrir_speech EXIT
+trap 'exit 130' HUP INT TERM
+
+discover_modules() {
+    local output line candidate
+    local skippedHeading=false
+
+    if ! output="$("$spdSayCommand" -O 2>/dev/null)"; then
+        return 1
+    fi
+
+    modules=()
+    while IFS= read -r line; do
+        candidate="${line%$'\r'}"
+        candidate="${candidate#"${candidate%%[![:space:]]*}"}"
+        candidate="${candidate%"${candidate##*[![:space:]]}"}"
+        [[ -n "$candidate" ]] || continue
+        if [[ "$skippedHeading" == false ]]; then
+            skippedHeading=true
+            continue
+        fi
+        is_safe_module "$candidate" || continue
+        modules+=("$candidate")
+    done <<< "$output"
+
+    [[ ${#modules[@]} -gt 0 ]]
+}
+
+configured_module() {
+    local configured=""
+
+    if [[ -r "$speechConfig" ]]; then
+        configured="$(awk '$1 == "DefaultModule" { print $2; exit }' "$speechConfig")"
+    fi
+    if ! is_safe_module "$configured"; then
+        configured="rhvoice"
+    fi
+    printf '%s\n' "$configured"
+}
+
+module_index() {
+    local wanted="$1"
+    local index
+
+    for index in "${!modules[@]}"; do
+        if [[ "${modules[$index]}" == "$wanted" ]]; then
+            printf '%s\n' "$index"
+            return 0
+        fi
+    done
+    return 1
+}
+
+draw_menu() {
+    local index
+
+    printf '\033[H\033[2J'
+    printf 'Select the default speech engine. Use Up and Down, Enter to select, or Escape to keep the current engine.\n\n'
+    for index in "${!modules[@]}"; do
+        if [[ $index -eq $selectedIndex ]]; then
+            printf '> %s\n' "${modules[$index]}"
+        else
+            printf '  %s\n' "${modules[$index]}"
+        fi
+    done
+}
+
+read_menu_key() {
+    local first rest=""
+
+    IFS= read -rsn1 first || return 1
+    if [[ -z "$first" ]]; then
+        printf 'enter\n'
+        return 0
+    fi
+    if [[ "$first" == $'\033' ]]; then
+        IFS= read -rsn2 -t 0.1 rest || true
+        case "$rest" in
+            '[A') printf 'up\n' ;;
+            '[B') printf 'down\n' ;;
+            '') printf 'escape\n' ;;
+            *) printf 'other\n' ;;
+        esac
+        return 0
+    fi
+    printf 'other\n'
+}
+
+declare -a modules=()
+previousModule="$(configured_module)"
+mute_fenrir_speech
+if ! discover_modules; then
+    announce_failure "$previousModule"
+    exit 0
+fi
+
+if ! selectedIndex="$(module_index "$previousModule")"; then
+    if selectedIndex="$(module_index rhvoice)"; then
+        :
+    else
+        selectedIndex=0
+    fi
+fi
+
+draw_menu
+"$spdSayCommand" "Use up and down arrows to select the default voice for this computer. ${modules[$selectedIndex]} is highlighted. Press Enter to select, or Escape to keep the current voice." >/dev/null 2>&1 || true
+
+while true; do
+    if ! keyName="$(read_menu_key)"; then
+        announce_failure "$previousModule"
+        exit 0
+    fi
+    case "$keyName" in
+        up)
+            selectedIndex=$(( (selectedIndex - 1 + ${#modules[@]}) % ${#modules[@]} ))
+            ;;
+        down)
+            selectedIndex=$(( (selectedIndex + 1) % ${#modules[@]} ))
+            ;;
+        enter)
+            break
+            ;;
+        escape)
+            "$spdSayCommand" -C >/dev/null 2>&1 || true
+            "$spdSayCommand" -o "$previousModule" "Keeping ${previousModule} as the default speech engine." >/dev/null 2>&1 || true
+            exit 0
+            ;;
+        *)
+            continue
+            ;;
+    esac
+
+    draw_menu
+    moduleName="${modules[$selectedIndex]}"
+    "$spdSayCommand" -C >/dev/null 2>&1 || true
+    "$spdSayCommand" -o "$moduleName" "This is ${moduleName}. If selected, I will be your default text-to-speech voice." >/dev/null 2>&1 || true
+done
+
+selectedModule="${modules[$selectedIndex]}"
+backupFile="${runtimeDir}/speechd.conf.$$.backup"
+"$spdSayCommand" -C >/dev/null 2>&1 || true
+
+if ! "${sudoCommand[@]}" "$scriptPath" --apply-module "$selectedModule" "$speechConfig" "$backupFile"; then
+    "${sudoCommand[@]}" "$scriptPath" --restore-config "$speechConfig" "$backupFile" >/dev/null 2>&1 || true
+    announce_failure "$previousModule"
+    exit 0
+fi
+
+if [[ -n "$selectionFile" ]]; then
+    if ! "${sudoCommand[@]}" "$scriptPath" --write-selection "$selectedModule" "$selectionFile"; then
+        "${sudoCommand[@]}" "$scriptPath" --restore-config "$speechConfig" "$backupFile" >/dev/null 2>&1 || true
+        announce_failure "$previousModule"
+        exit 0
+    fi
+fi
+
+rm -f "$backupFile" 2>/dev/null || "${sudoCommand[@]}" rm -f "$backupFile" 2>/dev/null || true
+
+"$spdSayCommand" -o "$selectedModule" "${selectedModule} is now the default speech engine." >/dev/null 2>&1 || true
+printf 'Default speech engine set to %s.\n' "$selectedModule"

x86_64/packages.x86_64

@@ -13,7 +13,7 @@ bluez
 bluez-utils
 bolt
 brltty
-broadcom-wl
+broadcom-wl-dkms
 btrfs-progs
 clonezilla
 cloud-init
@@ -59,6 +59,7 @@ lftp
 libfido2
 libusb-compat
 linux
+linux-headers
 linux-atm
 linux-firmware
 linux-firmware-marvell
@@ -90,6 +91,7 @@ nvme-cli
 open-iscsi
 open-vm-tools
 openconnect
+openevv-git
 openpgp-card-tools
 openssh
 openvpn

x86_64/pacman.conf

@@ -76,7 +76,7 @@ LocalFileSigLevel = Optional
 #[core-testing]
 #Include = /etc/pacman.d/mirrorlist
 
-[xlibre]
+[xlibre-stable]
 SigLevel = Required DatabaseOptional
 Server = https://packages.xlibre.net/arch/stable/$arch
 

x86_64/profiledef.sh

@@ -18,15 +18,13 @@ bootstrap_tarball_compression=('zstd' '-c' '-T0' '--auto-threads=logical' '--lon
 file_permissions=(
   ["/etc/shadow"]="0:0:400"
   ["/root"]="0:0:750"
-  ["/root/.automated_script.sh"]="0:0:755"
   ["/root/customize_airootfs.sh"]="0:0:755"
   ["/root/.gnupg"]="0:0:700"
   ["/root/.config"]="0:0:700"
-  ["/usr/local/bin/choose-mirror"]="0:0:755"
-  ["/usr/local/bin/Installation_guide"]="0:0:755"
   ["/usr/local/bin/livecd-sound"]="0:0:755"
   ["/usr/local/bin/configure-stormux"]="0:0:755"
   ["/usr/local/bin/install-stormux"]="0:0:755"
+  ["/usr/local/lib/stormux/select-speech-module"]="0:0:755"
   ["/usr/local/bin/stormux-setup.sh"]="0:0:755"
   ["/usr/local/bin/init-pipewire-sound.sh"]="0:0:755"
   ["/usr/share/fenrirscreenreader/scripts/ssh-login-monitor.sh"]="0:0:755"