Hopefully use connected screen to display video if available, fall back to dummy driver if not found.

files/etc/X11/xorg.conf.d/10-headless.conf

@@ -1,20 +0,0 @@
-Section "Monitor"
-        Identifier "dummy_monitor"
-        HorizSync 28.0-80.0
-        VertRefresh 48.0-75.0
-        Modeline "1920x1080" 172.80 1920 2040 2248 2576 1080 1081 1084 1118
-EndSection
-                                                                                                                                                      
-Section "Device"
-        Identifier "dummy_card"
-        VideoRam 256000
-        Driver "dummy"
-EndSection
-                                                                                                                                                      
-Section "Screen"
-        Identifier "dummy_screen"
-        Device "dummy_card"
-        Monitor "dummy_monitor"
-        SubSection "Display"
-        EndSubSection
-EndSection

files/usr/local/bin/configure-stormux

@@ -1,12 +0,0 @@
-#!/bin/bash
-
-trap 'popd &> /dev/null' EXIT
-if [[ ! -d /opt/configure-stormux ]]; then
-    echo "Installing configure-stormux..."
-    sudo git -C /opt clone https://gitlab.com/stormux/configure-stormux.git || exit 1
-fi
-
-pushd /opt/configure-stormux
-./configure-stormux.sh
-
-exit 0

pi4/build/build-stormux.sh

@@ -1,6 +1,6 @@
 #! /bin/bash
 #
-# Copyright 2020, Stormux, <storm_dragon@linux-a11y.org>
+# Copyright 2020, Stormux, <storm_dragon@stormux.org>
 #
 # This is free software; you can redistribute it and/or modify it under the
 # terms of the GNU General Public License as published by the Free
@@ -50,9 +50,9 @@ help() {
 declare -A command=(
     [h]="This help screen."
     [l:]="Language default is en_US."
-    [n:]="Image name, default is stormux-pi<3|4>-<yyyy-mm-dd>.img"
+    [n:]="Image name, default is stormux-pi<32|64>-<yyyy-mm-dd>.img"
     [s:]="image size in GB, default is 4."
-    [v:]="Version of the Raspberry Pi for which you are building. (3|4 default)"
+    [v:]="Version of the Raspberry Pi for which you are building. (32|64) default is 64."
 )
 
 # Convert the keys of the associative array to a format usable by getopts
@@ -76,10 +76,10 @@ while getopts "${args}" i ; do
             fi
             ;;
         v)
-            if [[ "${OPTARG}" =~ ^[34]$ ]]; then
+            if [[ "${OPTARG}" =~ ^32|64$ ]]; then
                 imageVersion="${OPTARG}"
             else
-                echo "Image version must be 3 for the Raspberry Pi 3, or 4 for the Raspberry Pi 4 (default)."
+                echo "Image version must be 32 for 32 bit (armv7h), or 64 for 64 bit (aarch64 default)."
                 exit 1
             fi
             ;;
@@ -90,9 +90,12 @@ while getopts "${args}" i ; do
 done
 
 # make sure variables are set, or use defaults.
-export imageVersion="${imageVersion:-4}"
-export imageSize="${imageSize:-4G}"
-export imageName="${imageName:-stormux-pi${imageVersion}-$(date '+%Y-%m-%d').img}"
+export imageVersion="${imageVersion:-64}"
+export imageSize="${imageSize:-6G}"
+imageName="${imageName:-stormux-pi4-${imageVersion}-$(date '+%Y-%m-%d').img}"
+imageName="${imageName/-64-/-aarch64-}"
+imageName="${imageName/-32-/-armv7h-}"
+export imageName
 export imageLanguage="${imageLanguage:-en_US.UTF-8}"
 
 # Make sure the image file doesn't exist.
@@ -110,15 +113,15 @@ fi
 # make sure the needed tools are installed
 if [[ "$(uname -m)" == "x86_64" ]]; then
     if ! pacman -Q qemu-user-static &> /dev/null ; then
-        echo "Please install qemu-user-static and binfmt-qemu-static before continuing."
+        echo "Please install qemu-user-static and qemu-user-static-binfmt before continuing."
         exit 1
     fi
-    if ! pacman -Q binfmt-qemu-static &> /dev/null ; then
-        echo "Please install qemu-user-static and binfmt-qemu-static before continuing."
+    if ! pacman -Q qemu-user-static-binfmt &> /dev/null ; then
+        echo "Please install qemu-user-static and qemu-user-static-binfmt before continuing."
         exit 1
     fi
 fi
-for i in dosfstools parted wget ; do
+for i in arch-install-scripts dosfstools parted wget ; do
     if ! pacman -Q $i &> /dev/null ; then
         echo "Please install $i before continuing."
         exit 1
@@ -127,14 +130,12 @@ done
 
 
 # Url for the image to be downloaded.
-#url[3]="http://os.archlinuxarm.org/os/ArchLinuxARM-rpi-aarch64-latest.tar.gz"
-url[3]="http://os.archlinuxarm.org/os/ArchLinuxARM-rpi-2-latest.tar.gz"
-#url[4]="http://os.archlinuxarm.org/os/ArchLinuxARM-rpi-aarch64-latest.tar.gz"
-url[4]="http://os.archlinuxarm.org/os/ArchLinuxARM-rpi-armv7-latest.tar.gz"
+url[32]="http://os.archlinuxarm.org/os/ArchLinuxARM-rpi-armv7-latest.tar.gz"
+url[64]="http://os.archlinuxarm.org/os/ArchLinuxARM-rpi-aarch64-latest.tar.gz"
 
 fallocate -l "$imageSize" "$imageName"
 loopdev="$(losetup --find --show "${imageName}")"
-parted --script "${loopdev}" mklabel msdos mkpart primary fat32 0% 100M mkpart primary ext4 100M 100%
+parted --script "${loopdev}" mklabel msdos mkpart primary fat32 0% 200M mkpart primary ext4 200M 100%
 mkfs.vfat -F32 "${loopdev}p1"
 mkfs.ext4 -F "${loopdev}p2"
 mount "${loopdev}p2" /mnt
@@ -144,12 +145,26 @@ mount "${loopdev}p1" /mnt/boot
 mounted=0
 imageFileName=$(mktemp)
 wget "${url[$imageVersion]}" -O "${imageFileName}"
+if [[ $imageVersion -eq 32 ]]; then
+    # Workaround for bsdtar errors when extracting 32 bit image.
+    set +e
+fi
 bsdtar -xpf "${imageFileName}" -C /mnt
+# Set -e in case it got unset for 32 bit image
+set -e
 arch-chroot /mnt << EOF
 # set up pacman
 pacman-key --init
 pacman-key --populate archlinuxarm
-pacman -Syyu --needed --noconfirm \
+pacman -Syy
+# Change kernels for aarch64
+if [[ "$imageVersion" == "64" ]]; then
+pacman -R --noconfirm linux-aarch64 uboot-raspberrypi
+pacman -S --noconfirm linux-rpi
+fi
+
+# Install packages
+pacman -Su --needed --noconfirm \
     alsa-firmware \
     alsa-utils \
     base \
@@ -158,21 +173,33 @@ pacman -Syyu --needed --noconfirm \
     bluez \
     bluez-utils \
     brltty \
+    cloud-utils \
     cronie \
     espeak-ng \
+    fake-hwclock \
+    firmware-raspberrypi \
     git \
+    go \
     magic-wormhole \
     man \
     man-pages \
     networkmanager \
-    ntp \
     pipewire \
     pipewire-alsa \
     pipewire-jack \
     pipewire-pulse \
+    poppler \
+    python-pyudev \
+    python-daemonize \
+    python-evdev \
+    python-dbus \
+    python-pyte \
+    raspberrypi-utils \
+    realtime-privileges \
     rhvoice-voice-bdl \
     rng-tools \
     rsync \
+    screen \
     sox \
     w3m \
     wget \
@@ -192,7 +219,7 @@ systemctl enable rngd.service
 echo 'Stormux \r (\l)' > /etc/issue
 echo >> /etc/issue
 # Change the alarm user to be stormux
-usermod -a -g users -G wheel,audio,video,network,brlapi -m -d /home/stormux -l stormux alarm
+usermod -a -g users -G wheel,realtime,audio,video,network,brlapi -m -d /home/stormux -l stormux alarm
 # Grant sudo privileges to the stormux user for package installation.
 echo 'stormux ALL=(ALL) NOPASSWD: ALL' >> /etc/sudoers.d/wheel
 # Set the password for the root user
@@ -203,30 +230,44 @@ echo -e "stormux\nstormux" | passwd "stormux"
 sudo -iu stormux
 # Create desktop, downloads, music, and other directories.
 xdg-user-dirs-update
-# Install the yay package manager
-git clone https://aur.archlinux.org/yay.git
-cd yay
-makepkg -si --noconfirm
-cd ~
-rm -rf yay
-yay -S --noconfirm fenrir-git growpartfs log2ram
-rm -rf .cache/yay
-/usr/share/fenrirscreenreader/tools/configure_pipewire.sh
+# Build AUR packages
+export aurPackages=(fenrir-git \
+    growpartfs \
+    log2ram \
+    yay)
+export PKGDEST=~/packages
+for p in "\${aurPackages[@]}" ; do
+    git clone https://aur.archlinux.org/\${p}.git
+    cd ~/\${p}
+    makepkg -A
+    cd ~
+    rm -rf \${p}
+done
 exit
+# Install built packages
+for p in /home/stormux/packages/* ; do
+    pacman -U --noconfirm \${p}
+done
+rm -rf /home/stormux/packages/
 # Enable linger so that hopefully sound will start at login.
 mkdir -p /var/lib/systemd/linger
 touch /var/lib/systemd/linger/stormux
 systemctl --global enable pipewire.service pipewire-pulse.service
 /usr/share/fenrirscreenreader/tools/configure_pipewire.sh
+sudo -u stormux /usr/share/fenrirscreenreader/tools/configure_pipewire.sh
 # Configure sudo for group wheel, remove nopasswd for the stormux user
 echo '%wheel ALL=(ALL) ALL' > /etc/sudoers.d/wheel
 # Set the hostname
 echo stormux > /etc/hostname
-# Enable services
-systemctl enable brltty.path cronie.service fenrirscreenreader.service log2ram.service NetworkManager.service ntpd.service
+# Configure services
+systemctl disable systemd-networkd.service systemd-networkd.socket
+systemctl enable brltty.path cronie.service fake-hwclock.service fenrirscreenreader.service log2ram.service NetworkManager.service
+# Cleanup packages
+pacman -Sc --noconfirm
+pacman -R --noconfirm go
 
-# Update fstab for Raspberry Pi 4.
-#[[ $imageVersion -eq 4 ]] && sed -i 's/mmcblk0/mmcblk1/g' /etc/fstab
+# Update fstab for Raspberry Pi 4. Not needed until linux-aarch64 works.
+# [[ $imageVersion -eq 4 ]] && sed -i 's/mmcblk0/mmcblk1/g' /etc/fstab
 EOF
 
 # Copy override files into place.
@@ -234,6 +275,7 @@ cp -rv ../files/boot/* /mnt/boot
 cp -rv ../files/etc/* /mnt/etc
 cp -rv ../files/var/* /mnt/var
 cp -rv ../files/usr/* /mnt/usr
+find ../files/etc/skel/ -mindepth 1 -exec cp -rv "{}" /mnt/home/stormux/ \;
 
 # Exiting calls the cleanup function to unmount.
 exit 0

pi4/files/etc/X11/xorg.conf.d/10-headless.conf

@@ -0,0 +1,32 @@
+Section "ServerLayout"
+    Identifier     "Layout0"
+    Screen      0  "Screen0"
+EndSection
+
+Section "Monitor"
+    Identifier     "Monitor0"
+    Option         "DPMS" "true"
+    HorizSync       28.0-80.0
+    VertRefresh     48.0-75.0
+    Modeline        "1920x1080" 172.80 1920 2040 2248 2576 1080 1081 1084 1118
+EndSection
+
+Section "Device"
+    Identifier     "Card0"
+    # Try standard driver
+    Driver         "modesetting"
+    # Fallback to dummy
+    Option         "FallbackDriver" "dummy"
+    VideoRam       256000
+EndSection
+
+Section "Screen"
+    Identifier     "Screen0"
+    Device         "Card0"
+    Monitor        "Monitor0"
+    DefaultDepth    24
+    SubSection     "Display"
+        Depth       24
+        Modes      "1920x1080"
+    EndSubSection
+EndSection

pi4/files/etc/audibleprompt.sh

@@ -0,0 +1,7 @@
+#!/usr/bin/env bash
+
+play -qnV0 synth 3 pluck D3 pluck A3 pluck D4 pluck F4 pluck A4 delay 0 .1 .2 .3 .4 remix - chorus 0.9 0.9 38 0.75 0.3 0.5 -t &
+read -rsp "$*"$'\n' password
+echo "$password"
+
+exit 0

pi4/files/etc/environment

@@ -0,0 +1,12 @@
+#
+# This file is parsed by pam_env module
+#
+# Syntax: simple "KEY=VAL" pairs on separate lines
+#
+# Accessibility variables
+export ACCESSIBILITY_ENABLED=1
+export GTK_MODULES=gail:atk-bridge
+export GNOME_ACCESSIBILITY=1
+export QT_ACCESSIBILITY=1
+export QT_LINUX_ACCESSIBILITY_ALWAYS_ON=1
+export SAL_USE_VCLPLUGIN=gtk3

pi4/files/etc/motd

@@ -3,6 +3,8 @@ Welcome to Stormux, powered by Arch Linux ARM
             Stormux Website: https://stormux.org
        Arch Linux ARM Forum: https://archlinuxarm.org/forum
 
-                Stormux IRC: #stormux on irc.libera.chat
+                Stormux IRC: #stormux on irc.stormux.org
          Arch Linux ARM IRC: #archlinuxarm on irc.libera.chat
 
+         Thank you Stormux supporters! https://ko-fi.com/stormux/leaderboard
+

pi4/files/etc/profile.d/stormux_first_boot.sh

@@ -0,0 +1,34 @@
+#!/usr/bin/env bash
+
+if [[ "$(tty)" != "/dev/tty1" ]]; then
+    return
+fi
+
+if [[ -x /opt/configure-stormux/configure-stormux.sh ]]; then
+    return
+fi
+
+if ! [[ -x /usr/local/bin/configure-stormux ]]; then
+    return
+fi
+
+# For audible sudo prompts:
+unset sudoFlags
+if [[ -x /etc/audibleprompt.sh ]]; then
+    export SUDO_ASKPASS=/etc/audibleprompt.sh
+    export sudoFlags=("-A")
+fi
+
+cat << "EOF"
+Hello, and welcome to Stormux!
+
+Let's get you set up. After you press enter, you will be prompted for the sudo password.
+When that happens, type the word stormux and press enter.
+You will not receive any speech feedback for this process.
+That is completely normal, and speech will return after you have typed the password.
+Once again, the password is stormux in all lower case letters.
+
+Please press enter to continue.
+EOF
+read -r
+sudo "${sudoFlags[@]}" configure-stormux

pi4/files/etc/skel/.bash_aliases

@@ -0,0 +1,4 @@
+# Raspberry Pi Information
+alias pi-temp='/usr/bin/vcgencmd measure_temp'
+alias pi-version='cat /sys/firmware/devicetree/base/model;echo'
+alias pi-ip='ip a | grep -v "127.0.0.1" | grep -E -o "([0-9]{1,3}\.){3}[0-9]{1,3}/[0-9]{1,2}"'

pi4/files/etc/skel/.bash_functions

@@ -0,0 +1,21 @@
+memuse() {
+    ps axo rss,comm,pid \
+        | awk '{ proc_list[$2] += $1; } END \
+        { for (proc in proc_list) { printf("%d\t%s\n", proc_list[proc],proc); }}' \
+        | sort -n | tail -n 10 | sort -rn \
+        | awk '{$1/=1024;printf "%.0fMB\t",$1}{print $2}'
+}
+
+
+pdf()
+{
+    if [[ $# -ne 1 ]]; then
+        echo 'Usage: pdf <file>' >&2
+    else
+        local dir=$(mktemp -d -p /tmp pdf_conversion.XXXXXX)
+        local outFile="${1##*/}"
+        local outFile="${outFile%.*}"
+        pdftohtml -noframes -i -s "$1" "${dir}/${outFile}.html"
+        w3m -s "${dir}/${outFile}.html"
+    fi
+}

pi4/files/etc/skel/.bashrc

@@ -0,0 +1,24 @@
+#
+# ~/.bashrc
+#
+
+# If not running interactively, don't do anything
+[[ $- != *i* ]] && return
+
+#Change directories without using cd
+shopt -s autocd
+
+# Keep bash history in screen
+export HISTFILE="${HISTFILE}${WINDOW:+.${WINDOW}}"
+
+# load Aliases and functions
+[[ -f ".bash_aliases" ]] && source .bash_aliases
+[[ -f ".bash_functions" ]] && source .bash_functions
+#Invironment variables
+PS1='[\u@\h \W] \$ '
+export DIALOGOPTS='--no-lines --visit-items'
+GPG_TTY=$(tty)
+export GPG_TTY
+# Don't put commands prefixed with space, or duplicate commands in history
+export HISTCONTROL=ignoreboth
+

pi4/files/etc/skel/.inputrc

@@ -0,0 +1,6 @@
+# Reload changes with control+x followed by control+r
+set echo-control-characters off
+
+# History searching with up and down arrows.
+"\e[A": history-search-backward
+"\e[B": history-search-forward

pi4/files/etc/skel/.screenrc

@@ -0,0 +1,18 @@
+vbell off
+bell_msg ""
+hardstatus off
+startup_message off
+defscrollback 4096
+bind ! select 10
+bind @ select 11
+bind \# select 12
+bind $ select 13
+bind % select 14
+bind ^ select 15
+bind & select 16
+bind * select 17
+bind ( select 18
+bind ) select 19
+bind b eval "writebuf" 'exec !!! xclip -selection "clipboard" -i /tmp/screen-exchange'
+#termcapinfo xterm|xterms|xs|rxvt ti@:te@
+termcapinfo xterm* ti@:te@

pi4/files/etc/systemd/system/time_sync_at_boot.service

@@ -0,0 +1,11 @@
+[Unit]
+Description=Update system time from worldtimeapi.org
+After=network-online.target
+Wants=network-online.target
+
+[Service]
+Type=oneshot
+ExecStart=/usr/local/bin/sync_time.sh
+
+[Install]
+WantedBy=multi-user.target

pi4/files/usr/lib/systemd/system/ntpd.service

@@ -6,7 +6,7 @@ Conflicts=systemd-timesyncd.service
 [Service]
 Type=forking
 PrivateTmp=true
-ExecStartPre=/usr/bin/ntpd -gq
+ExecStartPre=/usr/bin/ntpd -Ggq
 ExecStart=/usr/bin/ntpd -g -u ntp:ntp
 Restart=always
 

pi4/files/usr/local/bin/configure-stormux

@@ -0,0 +1,139 @@
+#!/usr/bin/env bash
+
+# For audible sudo prompts:
+unset sudoFlags
+if [[ -x /etc/audibleprompt.sh ]]; then
+    export SUDO_ASKPASS=/etc/audibleprompt.sh
+    export sudoFlags=("-A")
+fi
+
+trap cleanup EXIT
+cleanup() {
+    popd &> /dev/null
+    if ! [[ -x /opt/configure-stormux/configure-stormux.sh ]]; then
+        echo "Initial setup is not complete."
+        echo "To continue setup, please run:"
+        echo "sudo configure-stormux"
+    fi
+}
+
+
+if [[ -x /opt/configure-stormux/configure-stormux.sh ]]; then
+    pushd /opt/configure-stormux
+    ./configure-stormux.sh
+    exit 0
+fi
+
+export DIALOGOPTS='--insecure --no-lines --visit-items'
+
+set_timezone() {
+    # Get the list of timezones
+    mapfile -t regions < <(timedatectl --no-pager list-timezones | cut -d '/' -f1 | sort -u)
+
+    # Use the same text twice here and just hide the tag field.
+        region=$(dialog --backtitle "Please select your Region" \
+                --no-tags \
+                --menu "Use up and down arrows or page-up and page-down to navigate the list, and press 'Enter' to make your selection." 0 0 0 \
+                $(for i in ${regions[@]} ; do echo "$i";echo "$i";done) --stdout)
+
+
+    mapfile -t cities < <(timedatectl --no-pager list-timezones | grep "$region" | cut -d '/' -f2 | sort -u)
+
+    # Use the same text twice here and just hide the tag field.
+        city=$(dialog --backtitle "Please select a city near you" \
+                --no-tags \
+                --menu "Use up and down arrow or page-up and page-down to navigate the list." 0 0 10 \
+                $(for i in ${cities[@]} ; do echo "$i";echo "$i";done) --stdout)
+
+    # Set the timezone
+    if [[ -f /etc/localtime ]]; then
+        rm /etc/localtime
+    fi
+    ln -sf /usr/share/zoneinfo/${region}/${city} /etc/localtime
+    timedatectl set-ntp true
+}
+
+
+# Offer to switch fenrir layout.
+echo "Would you like to switch Fenrir to laptop layout?"
+echo "Press y for yes or n for no followed by enter."
+read -r continue
+continue="${continue::1}"
+if [[ "${continue,}" == "y" ]];then
+    sed -i 's/=desktop/=laptop/' /etc/fenrirscreenreader/settings/settings.conf
+    clear
+    systemctl restart fenrirscreenreader.service
+fi
+
+# Check for possible resize
+diskSource="$(df --output='source' / | tail -1)"
+diskSize="$(df -h --output='size' / | tail -1 | tr -cd '[:digit:].')"
+diskSize=${diskSize%.*}
+if [[ $diskSize -le 7 ]]; then
+    echo "$diskSource is only $diskSize gigs, which means it probably needs to be resized. Would you like to do this now?"
+    echo "Press y for yes or n for no followed by enter."
+    read -r continue
+    continue="${continue::1}"
+    if [[ "${continue,}" == "y" ]];then
+        sudo "${sudoFlags[@]}" growpartfs $diskSource
+    fi
+fi
+ 
+if ! ping -c1 stormux.org &> /dev/null ; then
+    echo "No internet connection detected. Press enter to open NetworkManager."
+    echo "Note, it is best to put Fenrir into highlight mode while using NetworkManager."
+    echo "In desktop layout this is done by pressing Fenrir+numpad asterisk."
+    echo "That is the key just above numpad 9."
+    echo "In laptop mode, press Fenrir+y."
+    echo "In desktop mode the Fenrir key is numpad insert."
+    echo "In laptop mode the Fenrir key is the Super key, sometimes called the Windows key."
+    echo "After connecting to the internet, remember to go back to cursor mode."
+    echo "It is the same key used to switch to highlight mode."
+    echo "Press enter to continue."
+    read -r continue
+    nmtui-connect
+fi
+# Check for internet connectivity
+if ping -qc1 -W 1 stormux.org &> /dev/null; then
+    echo "Updating the clock to prevent certificate errors..."
+    # Get current date and time
+    date_time=$(curl -s http://worldtimeapi.org/api/ip | grep -oP '(?<="datetime":")[^"]*')
+    echo "Current date and time: $date_time"
+    # set date and time
+    date -s "$date_time"
+    echo "If your Pi does not have a CMOS battery and is powered off regularly, it may take a while for the time to be set correctly after boot."
+    echo "Stormux provides a service to sync the time after internet connection is established."
+    read -rp "Would you like the time to sync as soon as the Pi connects to the internet? " answer
+    answer="${answer:0:1}"
+    if [[ "${answer,,}" == "y" ]]; then
+        systemctl enable time_sync_at_boot.service
+    else
+       echo "Time sync at boot skipped."
+       echo "If you change your mind later, simply type:"
+       echo "sudo systemctl enable time_sync_at_boot.service"
+    fi
+    set_timezone
+else
+    echo "Please connect to the internet and run ${0##*/} again."
+    exit 1
+fi
+echo "Installing configure-stormux..."
+git -C /opt clone -q https://git.stormux.org/storm/configure-stormux || exit 1
+
+echo
+echo "Initial setup is complete."
+echo
+echo "The default passwords are stormux for the stormux user"
+echo "and root for the root user. It is highly recommended to change them."
+echo "To change the password for stormux, run:"
+echo "passwd"
+echo "To change the password for root, run:"
+echo "sudo passwd"
+echo
+echo "For more configuration options, run configure-stormux,"
+echo "or you may configure your system manually."
+echo
+echo "Thank you for choosing Stormux."
+
+
+exit 0

pi4/files/usr/local/bin/sync_time.sh

@@ -0,0 +1,4 @@
+#!/usr/bin/env bash
+
+date_time=$(curl -s http://worldtimeapi.org/api/ip | grep -oP '(?<="datetime":")[^"]*')
+date -s "$date_time"